Hard drive bootable to tiger

I have a hard drive (500 gb) and I would like to install OSX Lion on it and boot it to my older iMac which has OSX Tiger. Is this possible?

Only if your older iMac is an Intel model. However, your profile indicates you are using Panther which would indicated that your iMac is not an Intel Mac. See:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

Similar Messages

External hard drive bootable with Mac OS x 10.9

Hello!
i have these: Install-OS-Mavericks DMG file.
but i don't know how to Install the file.
i can to install this at the external hard drive (USB).
please help me!
How to creat the external Hard drive bootable in the Mac Intel or Pro? please give me simple methode!
How to install the OS with the external Hard drive? or any solution.
Thank you very much for your help.
Justin R.

To install the file, if you did not download the Install Mac OS X from the Mac App Store, you must make sure your Mac Pro is compatible, it must be at least a Mac Pro3,1 to install Mavericks. If you are compatible, and want to install on a USB drive, first you must open Disk Utilities (in Finder, Applications, Utitlities) and then select the exernal drive from the devices listed in the left panel of the Disk Utilities window. Then decide if you want one or more partitions on the drive and the size of the partitions. Select each partition one at a time and name the partition and then choose the format as Mac OS X Extended (Journaled), and the Partition Table as GUID, and then Apply to format the drive.
Once that is done you place the Mavericks Installer DMG file on the desktop, double click to open and then choose the drive for installation to be the external drive you have formatted and named.
The installer will install and then delete itself when finished. If you want to keep a copy, make a copy and store it in a safe place, such as your Documents folder.
To boot to the external hard drive, restart the Mac Pro and hold the Option key. That will result in a grey screen with images for each of the bootable drives. Highlight the arrow under the drive you want to boot and then click that arrow again.

2 hard drives, 2 OS (Tiger/Leopard) same Mac...any suggestions?

2 hard drives, 2 OS (Tiger/Leopard) same Mac...any suggestions?

I'm thinking of adding a 200gb hd to a g4 mac that has a 80gb hd installed. Would like to run 10.5 Leopard on the 200 and 10.4 Tiger on the 80 to accomodate software that won't run on 10.5. Will that work? That is the question. Any suggestions?

How to properly clean install: erase, partition hard drive, and install tiger then SL

Hello,
     I am a noob at this, so if responders would be kind enough to be detailed / specific with any instructions it would be most helpful! I own a dinosaur apparently (even though I don't think so): the white (not unibody) Intel macbook2,1 (late 2006) 1.83 GHz with currently 1GB of RAM, but I have 2x2GB RAM sitting next to me ready for install. However, first I would like to do a clean uninstall of my computer (running OS X 10.6.8 SL). I also would like to properly partition my hard drive while I'm at it.
     About 6 months ago I had serious crashing issues, along with kernel panics, hangs, applications randomly appearing & disappearing, system settings and options doing the same, fans running high (probably due to the low RAM available), and basically overall screwiness. So, after trying pretty much every option I could find on this community...and many others... (e.g. clean cache, clean old logs, already did a clean uninstall and install of SL, and much much more) I have reached my wits end. I would say that to date I've wasted a good solid 2 months with this.
     The clean install worked for MAYBE a month or so, but then it started acting up again with the fans (even without high pages in/out, CPU or memory usage) and excessive heat, along with the apps freezing and quitting (mind you it would be only two things open such as 1 word document and then firefox-- with flash disabeled). SOOOOOO long story short, I have purchased new RAM and I would like to try this once again, but to ensure I don't screw it up this time I would like some directions as to how to do the uninstall, partition, then reinstall. (currently to date I ensured all updates are completed---even though they are no longer released for SL, and I just did a full backup).
     Also, I need to first install Tiger (my original OS) as when I went to do a hardware test the other day this was not an option (and upon further research it is due to me not using Tiger as a first install and then using my mac box set for SL). I didn't use my original OS first because....one issue encountered when I had tried to install Tiger was that my Disc 2 (the applications one) took around 1.5 hrs to complete, but when I reached the last step of glory where I expected it to say COMPLETE it instead said that there was some sort of issue with the disc..........of course).
     Any help would be greatly appreciated.

1: If near a Apple Store or Authorized Repair, take it to then for a free evaluation, it might have other hardware problems now that it would be a waste of effort even continuing.
2: The RAM needs to be
Maximum Memory
3.0 GB (Actual) 2.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Basically what this means is you can put in a 2GB module and a 1GB module for 3GB total.
I wouldn't proceed with installing RAM just yet, not until you get a stable OS X version on the machine, you might have a hard drive needing to be replaced as well which you can do while inserting new RAM.
3: This User Tip can assist in installing 10.6 Snow Leopard, partition format etc.
How to erase and install Snow Leopard 10.6
Software Update fully immediately after setup.
There is no need to install Tiger, he 10.6 disk contains the full 10.6 version, you can either install the iLife from Tiger disks or use Pacifist from Charlesoft to extract them and place on your new install, then Software update to get them current.
4: If not successful then the drive also likely needs to be replaced, if so choose a 7,200 RPM SATA I w/1.5Gb/s connection.
Install/upgrade RAM or storage drive in Mac's
Repeat #3
If your getting beeping noises or "you need to restart" issues, it's likely one or more of the RAM modules is bad. Have it exchanged or swapped.
I advise good quality RAM the first time, if you buy cheap stuff it's just going back.
Don't go any further than 10.6.8 with that old machine, the performance will be terrible.

External hard drives work on tiger but not on leopard. WHY?

My 2 external hard drives worked fine on tiger. I had the backup program and used it every week. Now that I loaded up leopard, I cant see the external hard drives. When I take the drives and plug them to my mac book pro which I have not yet upgraded, they come up fine.
I cant even see them in disk utility
Please help

My external doesn't work either. It seems like it is trying to boot, but doesn't. Meanwhile, the Mac Pro churns and the fan goes into high gear. At that time the screen freezes and the little rainbow wheel just spins. The only way I could get the Mac back was to power down with the power button on the front of the CPU and unplug the external drive. It's just a backup drive but I would like access to it. I'm looking to see if the manufacturer has a patch online, but I'd appreciate any suggestions ion the meantime. I haven't upgraded to Leopard yet on my MacBook Pro, maybe I'll wait a few days... Anyone know what to do?

Is a WD My Book Studio Desktop 3TB Hard Drive - FW 400/800, USB 2.0, Apple Time Machine Ready external hard drive bootable with my Powerbook G4 12" PPC 10.5.8?

Sirs or madams,
Is my Powerbook G4 12” PPC 10.5.8 'bootable' with a Western Digital My Book Studio Desktop 3TB Hard Drive - FW 400/800, USB 2.0, Apple Time Machine Ready external hard drive? Western Digital says officially no, but that it MIGHT be. I primarily live in China and bought a datastorage.com.cn Clearlight s400+ external hard drive enclosure with a 320GB disk drive a few years ago in China. My computer 'boots' fine from it, but since I got it in China all the paperwork, etc. is in Chinese; my Chinese isn't quite sufficient enough yet to read it. But there are references to something called "SATA", whatever that is.
My level of computer 'under the hood' knowledge is extremely low. I've been told that SATA has some relationship as to whether or not an external hard drive will boot a computer via the Firewire connection, something relating to 'interface', which I assume is how separate electronic gadgets work, or don't work, with each other.
I frankly don't care much for computers, the internet, or their related gadgets such as all these fancy phones. I longingly reminisce about the days when there were no such things. I use a computer & the internet because I have to, and unfortunately unlike a car where one doesn't have to have 'under the hood' knowledge to operate it, just knowledge of the steering wheel, brake, gas, etc., one seemingly must know a ridiculously great amount of 'under the hood' knowledge, including jargon, to operate computers.
So, please try to respond accordingly; thank you.
If this particular external hard drive won't, for certain, be bootable with my computer, can you advise as to what readily available brand/model would be in the 3TB range for a similar price, roughly $150ish??
Thank you very much.

Mr. BGreg,
Thank you very much. "...under the covers...". I think you meant "under the hood", as in a car. I suppose "under the covers" would be man/woman interfacing, which I am familiar with!
Actually, I'm back in the US now for a few months. I looked at the OWC web site, but only cusorily so far. I'll contact them; they appear knowledgeable about Apple computers.
As to what you wrote about Western Digital's cases, I certainly wouldn't want a poor case. In China I had over time gotten 3 different external drive cases, 3 different Chinese brands, and separately bought Hitachi brand disk drives that 'simply' plugged into the cases. The drives are roughly 80GB 120GB and 320GB. The two larger ones are in cases that have Firewire plugs/jacks, which are bootable with my computer.
So my understanding, as you wrote, has been that my Powerbook will boot from an external hard drive, provided it connects via Firewire, and the disk drive itself is 'normally' formatted with however my computer's own disk drive is formatted, (HFS OS extended (journaled) or some such??). So I was left wondering why Western Digital would indicate that even though their such-and-so external hard drive case/drive was Firewire capable, that they would then say it would not be bootable with my Apple PPC computer......
Well, anyway, since you indicated Western Digital's case quality is suspect, then I'll try OWC and disregard Western Digital.
Naturally, OWC should be able to address this, but your thoughts are also welcome. You mentioned the OWC cases are good with Apples. Would the disk drives OWC supplied with the cases also be of relatively dependable quality?? From my so far only cursory look at their web site they appear to have various options, including case only options where I could insert my own or their own drives. These sorts of options seem preferable, also along with quality components.
My Powerbook has been in use since 2004. In China I put in a 1.25 memory 'chip' in the bottom and installed the 10.5.8 operating system, which I understand are the maximum workable with my Powerbook. When I inquired with Chinese friends if my 1.33 GHz processor could be taken out and a more powerful one put in, they said it wasn't feasible because in my particular computer my processor was, as I recall them saying, soldered/'permanently' connected with the 'motherboard', that it would just be easier to get a new computer.
I would be with them and they would nonchalantly open it completely up showing me all its tightly arranged 'innards' while at least giving it a good internal dust/dirt clean job for cheap lunch and a beer (& so much dirt/dust/lint there was!)...these are the same folks who build the things of course...fast moving hands with tiny screws flying everywhere, but everything 100% all back in place when finished.
My Chinese friends also said that nowadays Apples are not as well built as when my Powerbook was built, that nowadays an Apple's life expectancy was considerably lower, so I fear that when I get a new computer that, though it will be more up-to-date and powerful, etc., it most probably won't last near as long as my Powerbook has. They also said that in an older computer the fan was often the first component to go bad, and if a new one couldn't be easily found, as they said was my case, then you're just left with having to get an entirely new computer. Part of why I dislike electronic computer gadgets generally is that they are obsolete so quickly.
So, anyway, thanks very much for your information.

Want to erase hard drive and reinstall Tiger- quick questions

I am giving my G4 to my son in a couple of days and it now has Classic on it. My plan is to erase the whole hard drive and install just Tiger. So my thoughts are:
1.) There are no settings I want/need to preserve. I have 4 Tiger CD's- is that the right number? I think I have them all but just want to make sure.
2.) Do I insert CD holding down the C key and from some point when the CD loads, I chose Disk Utility and wipe the hard drive then? Are there different choices for wiping the hard drive? Like the number of passes?
3.) And then is it just a simple matter of installing all 4 Tiger disks?
Any other tips, tricks, advice you can give me? Tomorrow's the big day (2/1)! Thanks so much, I am a bit nervous about this......... Judy

mrstee:
Here are some directions you may find helpful:
Formatting, Partitioning Erasing a Hard Disk Drive
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Click Erase button
Quit Disk Utility.
Installation Process
Open Installer and begin installation.
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install Mac OS X 10.4.11 Combo update (PPC)
Computer will restart after installing update.
Repair Disk Permissions as previously.
Go to Apple Menu > Software Update.
Install all updates.
Computer may restart after updates.
Repair Disk Permissions, again, as previously.
Please do post back with further questions, comments or an update.
Cheers
cornelius

How much hard drive space does Tiger need to be installed?

I have a small hard drive that I want to set up as a boot drive. What is the minimum disk space required to install Tiger? Thanks.

For an emergency boot drive 20GB will work, possibly even a 10GB if you omit several unused Languages & Printer drivers.
While a finished install may end up only 2.5 GB, during installation many temp & VM files are used, possibly as much as 10GB for a 2.5 GB install.
IMO, 20GB is not enough for use on anything but Emergency use.
If you're not going to install from your Optical, how are you going to do it?

Installed Leopard but Hard drive is still Tiger

I had to wipe my drive on my 2006 MacBook Pro. I reinstalled Leopard but now the hard drive says it's Tiger. What happened? How do I fix?

mcrosby wrote:
Ok, Apple Support told me to reinstall OS X. They told me I would loose all my settings as I was going to set the machine back to the original factory setting of the base OS X installation disk. It was recommended that I back up all my files on the external hard drive, which I did.
This is a good start at understanding what you did, but it would be clearer if you said exactly what you did to "set the machine back to the original factory setting." IOW, which install option did you choose, what disk did you use (a gray system-specific disk or black retail disk & the version of the OS it installs), if you used Disk Utility run from the installer disk to erase or partition the drive before the installation, & if you installed only the Apple software or if you installed anything (at all) from a third party (non-Apple) vendor at any point in the process. Did you use Software Update to update the OS to 10.5.6? Did you reenter the user & network settings by manually typing them or with a migration assistant or something like that?
Was your backup made with Time Machine or in some other way?
Earlier in this topic you mentioned other problems besides connectivity. Do you still have them as well? When you did have them, were you also experiencing the connectivity problem?
Basically, there are two possibilities: the issue is software or hardware related. It is unlikely that the 10.5.6 update itself is the problem; if it were, the problem would not be present when you first installed the OS (however you did it) before updating the OS to 10.5.6. Thus, we must be certain that you first installed some 'factory fresh' version of Leopard less than 10.5.6 & did in fact still see the connectivity problem before doing anything else.
Again, let me emphasize the importance of your telling us exactly what you did, not what Apple said to do or any interpretation of what it was similar or equivalent to.

How Can I clear the hard drive and install Tiger?

I bought a used iBook. I do not have the original discs, but I do have Tiger on DVD. Is it possible to clear the hard drive completley and put on a fresh copy of Tiger? How can I do this?

Rolesh:
Formatting, Partitioning Erasing a Hard Disk Drive
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
Installation Process
(If you are still booted from the install disk skip first three steps)
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later) BSD Subsystems (Panther & earlier).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
Please post back with questions, comments or update.
Good luck.
cornelius

2 internal hard drives Mac Pro Tiger Server

I have a mac pro 10.4.11 server that has 2 internal hard drives. 1 is 232.89 GB which is the main startup drive and the second is 465.76 Gb which I had pre installed for extra storage. My question is when I look in Server Admin under sharing and I click the "all" tab. It displays 2 hard drive icons and when you select either one, they consist of the exact same things. Do I need to format the second drive in a way so it will be recognized in the Server Admin Sharing?? I can install applications to the drive as it is recognized in the normal finder but I can't seem to get Server Admin to know it is there. I was going to use the second drive for mostly applications and storage. The other hard drive I was going to try and keep just for home directories.

This is the wrong forum for your topic. You should post it in the Mac OS X Server forum.

I'm using an external hard drive to run tiger

do to the fact that my internal drive seems to be busted and the computer sayss it's not even there. (if you know what's wrong with that, please tell!!!)
Anyways, my problem is that the whole thing will freeze for no reason once in a while and I am forced to give it a hard shutdown. Is this fixable?
Thanks for your time and help ladies and gents!

What make/model of external hard drive. Some disks themselves have a default power save feature, which may kick in regardless of the enclosure or system power settings. I have a Hitachi deskstar drive in an ADS enclosure, and it behaves this way - the drive spools down and power saves entirely on it's own, independent of the system power save settings (since the ADS's chipset does not support that feature, the disks internal settings take over).
If I were to use that drive as a boot drive, and let it sit idle (no disk read or write access) for a few minutes, the drive would power save, and the system would, of course, become unresponsive. Perhaps your external drive is similar?

Saving Mail before erasing hard drive and reinstalling tiger

I might need to erase my hard disk and reinstall Tiger. I would like to keep my mail app how it is. Last time I tried syncing my Mail App to my online mail accounts not all the mail was downloaded to MAIL. Anyone know some ways to go about this.

First reinstalling Tiger is rarely necessary.
Second .Mac sync only syncs the rules and preferences for Mail. It does not sync messages.
See KB 301239, How to back up and restore your important Mac OS X 10.4 files.

Install Arch on External Hard Drive Bootable on Most Computers

At work I've been using a Mac OS X partition to boot up people's Macs and perform file recovery/partition manipulation. I'm trying to figure out how to install Arch Linux to an external hard drive so that it can be booted by the max number of computers, both PC and Mac. Should I go with grub, grub-efi 32 bit, grub 64, lilo, efistub, etc. for the bootloader? Can anyone give me some guidance on this?
Thanks
Last edited by duke11235 (2013-06-05 03:10:34)

With grub, you can actually specify where the config is located. So you can put the grub config for UEFI in the same path as grub.efi, then the bios grub could still be in /boot/grub like usual. Personally, I would use something else though, as I am not the biggest fan of grub.
I think that you need to read through the grub wiki page, as most of the grub knowledge that i have (which isn't much TBH) came from that page. So the fact that I know this crap and I don't use it, means to me that you haven't actually read through that page very closely. It is a wealth of information actually.
I like using the EFISTUB for UEFI, so I am more of a gummiboot or rEFInd kind of user. Then I use syslinux as my backup bios setup.
I know nothing about requiring rEFInd for UEFI booting from an external HDD. I have never actually tried it. But when I set up UEFI on my old macbook in the ESP, the entry just showed up in the mac bootloader. So unless the Macs don't respect some of the basic UEFI standards (which is a very real possibility) there should be the ability to have multiple ESPs.

How do I create a bootable hard drive partition?

Hello,
Would someone out there be kind enough to give me step by step instructions for creating a partition on my external hard drive that I could use to boot my computer in the event of an emergency? I understand how to use Backup for my files, but I want to know how to make the hard drive bootable, as well.
Thanks!
Eli Garfinkel

When you say step by step I'm guessing you're saying you are a little inexpierenced so I'm going to give it to you very thoroughly.
First: If you are not using this external HD for anything else then there is no need to partition and you should skip to "Making Bootable Clone"
"Making the Partition":
1) Plug in the external HD.
2) Launch Disk Utility
3) Click on the ext. HD in the left hand column
4) Click on the Partitions tab.
5) Create the number of partitions by clicking the dropped down menu under "Volume Scheme"
5a) The partition that will be the bootable one should be as big as the internal HD.
6) Format it as Mac OS X Extended (Journaled)
7) Check the Mac OS 9 Drivers...just in case.
8) Click the Partition button in the bottom right and let DU do its work.
"Making Bootable Clone"
-I highly recommend you buy the $27.95 copy a SuperDuper! (shirtpocket.com)
-It will allow for easy incremental backups, which can be done each day, that will keep you up-to-date.
1) Once you've downloaded SuperDuper! & have the disk partitioned open SuperDuper!
2) In the "Copy" box select your internal HD.
3) In the "to" box select the partition.
4) Make sure "using" says "backup-all files"
5) Select "Options" button and under the "During Copy" make chose the first option. This erases the partition and then copies the internal onto the external.
-After this is completed you can continue to do this, daily. The only difference is you'll have to change the "During Copy" in the "Options" button to the second option. This is the "Smart Update".
-A Smart Update will delete or create files on the ext. HD so it mirrors the internal. The results is the ext. HD is exactly like the internal and it only takes 10-15min. You ext. HD will always be up to date then. You can run this every night.
-This will result in an exact clone and you can boot form this partition if you ever need to.

Hard drive bootable to tiger

Similar Messages

Maybe you are looking for