Has a way been developed using CVI to create a window similar to windows explorer's left pannel?

I am trying to develop a way to creat a pannel similar to the left one in windows explorer. Are there any allready defined functions (similar to VB TreeView) that can do this in Lab Windows CVI?

There has been a tree view control developed by a CVI developer that is available at http://welcome.to/cvi under the user-contributed files. In the future, CVI will support the use of ActiveX controls in CVI panels which will allow the use of Microsoft's TreeView control.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

Similar Messages

Has a fix been developed for the problem with trackpad not scrolling in mail after a Maverick install?

Has a fix been developed for the issue with Trackpad not scrolling in Mail after a Maverick Install?

"Fix?" To my knowledge there is no widespread problem (I have none myself).
Barry

Trying to use Parallels to create a virtual PC running Windows 7

I am trying to help a friend with this problem but I am woefully inadequate to assist on this one! Here is a brief description of what's going on – by the way I am using a MacBook Pro, Lion OS X. I use Parallels to create a virtual PC running Windows 7. I have installed Office 2010 on the PC side and Office 2011 on the Mac. All VBA works fine on the PC side, but bombs on the Mac. It was my understanding (directly from Apple) that with the release of Office 2011 for the Mac that all code was now conforming with the PC version. This is probably true for new code written under Office 2010 (PC), however, most all of my applications have been developed over time through many versions of Windows based software (probably the last 10 years)…to date I have never had an issue with compatibility (on the Windows side). I have done some online research into the errors that I receive, however I am really an novice/intermediate programmer and am unable to find adequate solutions to the initial problems (as shown below).
Once I receive the run-time error 1004 I use the debug feature, etc. and end with "Can't find project or library. The initial error is probably just the beginning, but I am unable to go forward from this point.
Any help would be much appreciated…thanks.

Well your topic is about virtual machines and the body of your post is about Visual Basic. So what exactly do you want help with.
One has nothing to do with the other.
As to the error you posted that VBA program you are trying to run is looking for files in a specific place. Which would not be the same on a Mac as it is on a PC. For one reason PCs use Drive Letters for that path to folders. Mac's use Volume names.
Although I don't do a lot, if any, VBA programing you might be able to run those VBA Apps through the Mac side VBA to convert them to work on Office for Mac. You would also need to copy over whatever it is looking for that gives you that error.

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

Is there a way I can use Catalyst to create my custom flex components but make compatible with 3.5

I am new to Catalyst and looking for a way to create components in Catalyst to be compatible with an existing application created in SDK 3.5.
I am working on a project for a client to reskin an existing flex application done in SDK 3.5, but they are not ready to migrate yet to SDK 4.0.
I really want ot use Catalyst to create some custom components for the new style of this existing application, but the problem is the that the spark component architecture and the old version 3.5 are not compatible. Is there a way around this until they are ready to migrate to 4.0 or will I have to create my components in flash and bring them into flashbuilder with a swc this way instead? What would be the best approach for me at this point, please help?

No. Flash Catalyst leverages the new component framework that was introduced in 4.0 (aka Spark). Flex 3.5 and earlier used a framework (referred to as MX or Halo). That framework is incompatible with Flash Catalyst.
Chris

Is there a way I can use Catalyst to create my custom flex components but make it compatible with SD

I am new to Catalyst and looking for a way to create components in Catalyst to be compatible with an existing application created in SDK 3.5.
I am working on a project for a client to reskin an existing flex application done in SDK 3.5, but they are not ready to migrate yet to SDK 4.0.
I really want ot use Catalyst to create some custom components for the new style of this existing application, but the problem is the that the spark component architecture and the old version 3.5 are not compatible. Is there a way around this until they are ready to migrate to 4.0 or will I have to create my components in flash and bring them into flashbuilder with a swc this way instead? What would be the best approach for me at this point, please help?

No. Flash Catalyst leverages the new component framework that was introduced in 4.0 (aka Spark). Flex 3.5 and earlier used a framework (referred to as MX or Halo). That framework is incompatible with Flash Catalyst.
Chris

Has a patch been released for the flickering problem for Adobe CS and Windows 8?

Wondering if anyone has another fix besides going into Preferences, Performance and switching from Advanced to Basic. Does not work for me on my Dell

Thanks Trevor.. I forgot to mention the updates lol
Benjamin

Typedef Error when compiling niScope for DLL using CVI

I am getting the following error when trying to compile a DLL for the NI 5122 digitizer using CVI:
Error creating type library:
All structs, unions, and enums required by exported functions must be typedefs in order to create a type library. The struct/union/enum "niScope_wfmInfo" does not use such a typedef.
I have created a variable and "typedefed" it as niScope_wfmInfo to try and get rid of this error. This did not work. I have tried making several other changes. Some have eliminated the error but created problems with the DLL.
Has anyone had a similar error to this? If so, how did you get around it?
Thanks,
Heather

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

My Mac book air has been lost, how can i track? I have been already using Icloud id to track...but the system is still offline...what other ways can i track this?

My Mac book air has been lost, how can i track? I have been already using Icloud id to track...but the system is still offline...what other ways can i track this?

You cannot. Your best course of action is to immediately change all your internet passwords, notify the police and your insurance company. Send the remote wipe command to the MBA through iCloud.com and buy a new one from the insurance reimbursement.

My 4S keeps asking for my account password, it has my id but won't accept my password, I tried to create a new account but I keep getting "This Apple ID has not yet been used in Game Center.....nothing seems to allow me to enter.

I am unable to play games on my 4S. I keep getting this Apple ID has not yet been used in Game Center, I can't even create a new account....nothing I try seems to work.

Try start a game with Game Center feature and create a account this way.

Apple Account has not yet been used in the itunes store

Hello,
Not to long ago i had created a apple account on the Web, Now that i have an ipad am trying to download an app but when i log into my apply iD it says "Apple id has not yet been used in the itunes store."
So Then when i click Review.
They want me to put a credit card # and stuff but i don't wanna put them is there any hope ?

If you ever intend to purchase anything in iTunes, say a song, a magazine, a book, etc., you need to put a credit card on file. It's safe and secure and millions of us buy things via iTunes daily.
If you only intend to download free apps and will never buy anything, there is a way to create a credit card free account. But, I'd put the credit card on file so you're not limited in what you can with iPad.
How to create an iTunes account without a credit card: http://support.apple.com/kb/ht2534 (Click on related Subjects for more information)

Windows 7 all browsers constantly crashing and SSD disk has way to much used space than all the folders are combined in size.

I recently built a computer and was installing Windows 7 Ultimate 64 bit on it. I have a few problems going on. First of all all my browser are constantly crashing (including IE, Firefox and Google Chrome) on random reasons. I checked the conflicts on chrome
and there were none conflicting with it. I did the /sparrow thing to clear and fix corruption but that did not work. I've tried making a new user file in Chrome, same results. Another problem I've been having is that my SSD disk that I have Windows installed
on shows way to much space being used in My Computer. I checked all the file sizes within it and it is a maximum of 40GB all put togather but My Computer says only 28GB is free of 111GB SSD drive.
Here are the specs to my computer:
AMD FX 8350 CPU
Mushkin 16GB 1866hz RAM
Gigabyte Radeon R9 270x 4GB VRAM GPU
Gigabyte 990FXA-UD5 motherboard
600W Amrageddon PSU
120GB Mushkin Chronos Deluxe SSD
2TB SSHD Seagate
Anyone know what I can do?
P.S Drive cleanup freed only 500MB and the Recycle Bin is empty
P.P.S I moved the Program files from the SSD to the SSHD (If that matters) Also the download folder.

HH
1-You can check what is using the space with a free 3rd party tool called Treesize from Jam software
2-I believe you have a hardware issue and here is why.
Event viewer logs show
1-The platform firmware has corrupted memory (see snip)
2-The Browser are crashing because of something called a memory exception (Cx05) see snip
I would check for a BIOS update, configure your system to generate a user mode DMP file and upload it when they crash. Beyond that there are only a few events in EV (~300). We can alwasy use more.
You can configure Windows to create user-mode dumps. Create a System Restore Point first.
Copy and paste the following in Notepad and save as a .reg file, then right-click the .reg file and select "Merge" to add to the registry, a .dmp file should be created in the C:\CrashDumps folder:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
"DumpFolder"=hex(2):43,00,3a,00,5c,00,43,00,72,00,61,00,73,00,68,00,44,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
After the app crashes, can you then upload the dmp file via Windows Live Onedrive or other file sharing site.
The following link has information on using Windows Live Onedrive:
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
More info on collecting user-mode dumps:
»msdn.microsoft.com/en-us/library···85).aspx
Wanikiya and Dyami--Team Zigzag

This account has not yet been used with itunes store.Please review your account information

I get this message everytime I try to sync my iTunes to my iPhone "This account has not yet been used with itunes store.Please review your account information" When I originally bought apps I used my dads iTunes account, but my dad recently passed away and his accounts have (or should have) been closed. I just recently set up a new Apple I.D. and tried to use this, but that's when I get the message.
iTunes authorization automatically defaults to my dads Apple I.D., so I enter my new I.D. and the message appears "This account has not yet been used with itunes store.Please review your account information".
I'm frustrated, any ideas? I really don't have the money to pay Apple to fix this!
Thanks

I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
What am I supposed to do, this is very frustrating.
If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account.

My ipad is saying this apple id has not yet been used in the itunes store

my ipad is saying this apple id has not yet been used in the itunes store

EdwardGlenn wrote:
Lol the U.S.A.
And I would have no way of knowing that since you are not showing a location in your profile. This forum has users from all over the world looking for support.
Anyway, good luck. I hope that you are able to get this resolved quickly.

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

Has a way been developed using CVI to create a window similar to windows explorer's left pannel?

Similar Messages

Maybe you are looking for