Has anybody integrated Shoretel conferencing with Adobe Connect?

Has anyone integrated ShoreTel audio conferencing with Adobe Connect? If so, I would love some tips on how to do it.

James, I'm interested in this topic as well! I am not an IT person, just a user. I have Tech Support who are dealing with this. We have integrated our Shortel system 99.9% with Connect, but for some reason we can't get the DTMF to send properly. Very frustrating! Adobe has provided some assistance. Adobe wanted the SIP information (SIP IP adddress, username and password) which we set up; but my IT folks needed the correct ports that Connect wanted. This is what they sent me:
Below are the ports you
need to open to make FMG talk to your SIP server:
2222 - HTTP
8506 - RTMP
Flash Media Gateway to Internet   SRC-IP=<Server-IP>,
SRC-PORT=5060, DST-IP=ANY, DST-PORT=5060
Internet to Flash Media Gateway   SRC-IP=ANY, SRC-PORT=5060, DST-IP=<(>
<<)>Server-IP>, DST-PORT=5060
Flash Media Gateway to Internet   SRC-IP=<Server-IP>,
SRC-PORT=5000_TO_6000, DST-IP=ANY, DST-PORT=ANY_HIGH_END
Internet to Flash Media Gateway   SRC-IP=ANY, SRC-PORT=ANY_HIGH_END,
DST-IP=<Server-IP>, DST-PORT=5000_TO_6000
Maybe this will help?
Penny

Similar Messages

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

Which Premier Global (Premier NA) Audio product works with Adobe Connect Pro 7.5

I am trying to set up audio conferencing on my Adobe Connect Pro 7.5 so I am able to record a discussion online. So both myself and the participants on the call would be recorded. For my audio profiles, Premier Global (Premier NA) is set up as the participating provider. Which Premier Global audio account is used with Adobe Connect Pro 7.5 so an Adobe Connect session using teleconferencing can be recorded?

Any PGi phone bridge should work. Just be sure you start the audio conference in the meeting, or Connect will have no knowledge of the call.

High quality mic on external usb-soundcard dosen't work with Adobe Connect. Why?

Hello
A friend of mine bought a quite good microphone and a good extrernal soundcard for recording podcasts. Everything works fine. But know she wants to use the microphone for Adobe Connect, because of the very good sound quality. Adobe Connect finds it an you can select it, but now singal comes into Adobe Connect. But it works with every other Adobe application. So why doesn't it work with Adobe Connect?
The soundcard is the Tascam US-122 Mk2. Normaly very uncomplicated ..
Thanks for any advice!
Alinja

I connect my bus-powered HDs (more than one) to the iMac all the time without any problems. I have found, though, that for me the FireWire enclosures work much better (faster and more stable) than the USB2 ones. I have had the USB2 drives freeze my computer once or twice when I connected the HD, but nothing like that has ever happened with the FireWire connections. (I switched the same disk from USB to a FireWire enclosure, so all other elements were kept constant in my experiments.)
One of my HD is in a MacAlly 2.5" enclosure that offers both FireWire and USB2. The other one is in some generic enclosure with only USB2. Both are bus-powered and both work fine.

Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?

Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?

Adobe CC applications are very large and the base Mac mini isn't a good choice because it has only 4GB of RAM and has a slow standard hard drive. To get the most out of ACC you should upgrade the mini to at least 8GB. I'd also choose an SSD or Fusion drive for better performance.

Has anybody had a problem with greyed out wifi on i phone 4 gs

Has anybody had a problem with greyed out wifi setting on iphone 4gs

Forty four in the last week.
wifi greyed out

How do I export a Keynote 09 presentation to work with Adobe Connect??

Hi - I have imported the .MOV file from keynote into Flash and then exported it as a .FLV file but the problem is that all of my 'on click' build requests have disappeared so it just plays as one continuous movie. Can anyone help me please? It seems that a .MOV file (which works perfectly with the 'on click' features) cannot be played with Adobe Connect. I really need the presentation to play with all of the 'on click' settings in place. PLEASE HELP!!! :o)

Adobe Connect does not support Apple Keynote as a file format. Adobe Connect supports Microsoft Powerpoint format. When you use the Share Document Pod and upload a Powerpoint presentation that file gets converted on the fly to Adobe Flash format and then is streamed to attendees in the room. If you want to use Apple Keynote with Adobe Connect then you should use Share My Screen and use screen sharing to share exactly what you want without converting it into Flash. Adobe Connect does not support .MOV or Apple Quicktime formatted files today (release 8 and previous versions).

Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters?

I recently tried to install Adobe CMM, as a pop-up window suggested after I installed Photoshop CS5 on a new computer, running Win7x64 Ultimate. Before trying to install CMM, my Akvis Sketch Plug-In for Photoshop worked fine. Afterwards, Akvis Sketch runs under the filters menu, but will not accept mouse clicks from my Wacom tablet. Prior to Adobe CMM, all was fine. Somehow, the frustrating attempt to use Adobe CMM broke links to Akvis Sketch.
By the way, Adobe CMM setup tried to run and vanished without a trace - no indication of success or failure. CMM doesn't show on my control panel as installed software, so I can't de-install it.
I did un-install Akvis Sketch and re-install it. No luck as a filter, nor as a stand-alone program.
Additional point of interest - a second identical software/hardware workstation continues to run Akvis Sketch just fine because we didn't try installing Adobe CMM on that machine. It certainly looks like CMM is the culprit here.
Since Akvis Sketch is broken as a stand-alone, I doubt that de-activating, uninstalling and then re-installing, re-activating Photoshop CS5 will help, but it will take a lot of time to recreate actions and re-install other add-ins, plus preferences settings.
Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters, and have you found a work-around?

Thanks for your response. Recent evidence points to Wacom's tablet driver, not the plug-in.
Fact #1 - another identical system with ms mouse worked fine so I swapped out the Wacom tablet and bingo, the Akvis plug-in works again.
Fact #2 - So does Amazon's Kindle for PC app, which also quit working after running the Adobe CMM setup I'd downloaded.
Suggestion - since there's a legacy for CS5 users getting the "you should download CMM" pop-up, yet no need to do this, maybe Adobe should remove the CMM download page from its website - or flag this download as unneccessary for photoshop users. All Best, Charles Pierce.
Message was edited by: PECourtejoie Please do not autoquote messages, it makes threads difficult to follow.

Wich videocamera works best with Adobe Connect Pro?

I want to buy a videcamera to import live video in my ACP sessions. Wich videocamera works great or best?

Any camera that works with Adobe Flash Player should work well with Adobe Connect. Given the number of existing products in the market, we cannot possibly test with all specific brands and models.
Some folks in the team give some guidance around this topic in a blog post at Adobe Connect supported cameras and mic. See of this helps. Do let us know what works or does not work for you, so that the community benefits from your findings.
regards,
Ashish

Has anybody had a problem with there I Pad when turning there Wi Fi on and off ?

Has anybody had a problem with there I Pad after turning off your Wi Fi at night ?
Sometimes My I Pad seem to be locked out of My Wi Fi system in the morning .

Hi If the ipad is on charge overnight you need to leave your Wifi on Ipad backs up to ICloud when on charge and it needs Wifi If you turn your Router of at night your service provider thinks theirs a fault So they reduce your speed. Cheers Brian

I had a recent not so great experience with Adobe Connect

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

Has anybody integrated with CO-Sign for SSO / Authentication

Hi Folks,
Has anybody looked at Co-Sign for SSO in terms of forms / discoverer in the 11g release?
Gary

Marvin,
You make me feel better. I thought I might have been the only one who had ever done this. ;-) It's not too bad to clean up.
I am referencing old notes, and do not currently have access to an OID instance to verify, but try this:
In Entry Management, look under the default Oracle Context, under Services, and Ebusiness. You should see an entry for your EBS instance. (For example, the full DN might be: cn=VIS,cn=EBusiness,cn=Services,cn=OracleContext). Remove this record, and you should be set. You may need to remove other links to this record under your custom context. For example, there may also be a DN cn=VIS,cn=EBusiness,cn=Services,cn=OracleContext,dc=your_org,dc=com.
I was initially concerned that there might be a ton of junk to remove from OID related to the EBS instance registration, but I was not able to find any other likely entries, and was able to proceed with re-registration without issues after removing these two entries.
Hope this helps!
Regards,
John P.
http://only4left.jpiwowar.com

Integrate robohelp with adobe connect and captivate

RH8 HTML.
Hi all,
Just wondering if anyone has done this, or if it can be done at all.
I've produced a load of documentation for our web application, now we are beiong tasked with going down the elearning route with online courses etc.
I just want to know if there is any useful integration between robohelp, adobe connect, and/or captivate in terms of sharing content etc.
Even linking within RH to start a connect session or something similar.
Thanks.

I haven't used Connect Pro but my understanding is that it is just a kind of portal into which you can placecontent that can be viewed over the web between disparate groups. Adding content to Connect Pro (e.g. a Captivate movie) should be easy to do. Once there, you'd just link to the URL from your RoboHelp project. You'd need to enter user logon details no doubt which makes me wonder whether this is the way forward for you. I'd have thought you could integrate your Captivate movies INSIDE your RoboHelp project and publish this to the web. That way you wouldn't need Connect Pro.
If it's of help we do just this, although in our case the movies are stored on our own internal server. We just link to them from the help so they open in a separate window.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Using Uberconference with Adobe Connect

Hi Everyone
I have been beating my head against the ball trying to set up Uberconference to work with Adobe Connector.
I have tried to set it up as an Audio Provider -- but I just can't figure out how to set up the dial-in steps properly.
Has anyone out there used Uberconference -- or any other 3rd party audio conferencing provider -- successfully.
Help is much appreciated!
Greg

The dial in process would be exactly the same as if you were dialing into the bridge as a participant. Most of the time it needs the following steps.
Phone number:           800-555-5555
Delay:                        3000 ms
DTMF: (passcode)     123456#
Delay:                        3000ms
DTMF:                      1 or # (for a roll call or to join the bridge)
However if the provider is not using a SIP compliant bridge, the Universal Voice tool will fail upon attempting to dial out.
Also, for the hosted environment, the phone bridge must have a toll-free number.

Tips on using Mac OSX 10.7 Lion with Adobe Connect

Some folks have run into some audio issues when using Captivate and Presenter files playing in a Connect room after upgrading to Lion.
Apple decided to stop installing popular browser add-ins such as Java and Adobe Flash with Lion.
1. http://java.com/en/download/index.jsp to install Java for Mac
2. http://get.adobe.com/flashplayer/ to install Flash for Mac
Reboot and all should be well. Google's Chrome browser automatically includes Adobe Flash but Safari and Firefox do not so this is a necessary step.
Those that are hosting Adobe Connect on Lion Mac's will be needing a new host add-in under development. Apple has fixed the bug that was affecting the current Adobe Connect Add-in. The fix is in Apple's 10.7.2 Update coming shortly. I'm using it now and all is well again.

Thanks for replying.
When I open Pages from 'Applications', this is the screen that comes up -
Hmm, I'm slightly confused, I just right clicked Get Info on the Pages app and this appeared...
It says it was modified 2011, but its version 4.2 which didn't exist in 2011... right?
Sorry to bother you with this.

Has anybody integrated Shoretel conferencing with Adobe Connect?

Similar Messages

Maybe you are looking for