I had a recent not so great experience with Adobe Connect

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well. On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area. However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

Similar Messages

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

Any experience with Adobe After Effects?

Has anyone experience with Adobe After Effects and FCE. Does it work together?
WA

They will work together. There is no export to or send to function or no XML function to go to AE but the media will work in AE and the finished product can be brought into FCE.

Great experience with TC

I've had Time Capsule for over a month now and have been letting Time Machine keep back ups on it. I never had to use those backups until today! I've been working on a revision of an article for publication. I'm on the nth revision now but never thought of keeping the old drafts in tact and rather worked directly off of those drafts. A month after my now in-progress 5th or so revision, I realised I wanted to keep a copy of the first draft I submitted to the journal. I turned to Time Machine and in about a minute found the old copy and restored it. Whoo hoo!!! I love it!

True. Although it is also true that you don't hear much praise for costumer support. Most people that come here and describe their experience with it don't have many pleasant things to say about it =X
So this is good news, just to know that at least someone happy has come over and told us how good the experience was.

Not the average problem with wireless connection. Please help me..

I've been having wireless connection problems ever since I upgraded to Verizon FiOS from Verizon Wireless. Before upgrading to Verizon FiOS in the fall of 2012, my brother's laptop connected just fine with the connection. After upgrading to Verizon FiOS, my brother's laptop could not connect to the internet. It showed the wireless connection signal as Excellent, but I could not access the internet. Either it would be extremely slow or there would be no connection at all. Also, the router would sometimes restart itself randomly, and it was extremely annoying for me since I am hardwired with my desktop.
This was weird because my iPod Touch connected perfectly fine to the wifi. So I thought it must be the laptop. But I brought the laptop over to my cousin's house, who also happens to have Verizon FiOS, and the laptop connected perfectly fine. I called Verizon and none of the technicians knew what the problem was. We tried disabling and enabling the router, changing the channels, and anything that was on the list. They couldn't help me and I was extremely disappointed because not only am I not accessing the internet with my brother's laptop, but I am also paying for the service too. The last technician I called in 2012 decided to send me a new router. I hoped this would work, but it did not. This router, too, would completely reset itself numerous times before settling down and letting me use the internet.
I gave up after that. But in the spring of 2013, I got really fed up with the service I was receiving and I decided to call Verizon again. Again, Verizon tried to help me fix the laptop with their tools and solution guides. But nothing good came out of it, so I decided to ask for a technician to come to my apartment to fix it. We scheduled a day and I was pretty excited since I was almost positive that the connection for the laptop would be fine by then.
I was wrong. The technician came and only stayed for about 20 minutes. He said it must be the laptop or it must be that the walls are too thick in my apartment. But that can't be it since, in my cousin's house, the router is on the second floor and my brother was using his laptop on the first floor. So it couldn't be the laptop nor the house. So we came to no conclusion. He just attached a mini router to the laptop and hardwired it. I wasn't so content but I was glad my brother could finally use the internet now.
About three months pass by and I decide to get myself a new laptop. I get it and I am hoping the wireless connection works. It did, so I was almost positive that it was my brother's laptop that was the problem, not the wireless signal. I go on vacation for a few days and I connect perfectly fine at my friend's house. When I return home and try to connect to my wireless connection, it didn't work!
At this point, I am extremely frustrated. I decided to call Verizon again to replace my router because it was being extremely annoying. It kept resetting itself and I was tired of it. I replaced the router, and this is the router I currently have, but I STILL have the same problem. It resets itself on its own time and I hate it because I'm always in the middle of something. Wow, just wow. There is nothing they could do to help me fix this. I call up a technician, for the millionth time, and he tells me he can't access my router. This occurred with the previous technician who sent me the new router. He tells me his tools are not working and tells me he'll call me back the next day.
It was the next day and I did not receive any phone call. I am extremely disappointed in Verizon FiOS' service and it's customer service. I leave it alone and I just hardwire my laptop to the router. Of course this works, but what's the point of having a laptop when I have to keep it hardwired on my desk? After a day or two, I decide to check if the wireless connection works, and it did. I was surprised. But every now and then, it would shift on and off. Most of the time, the wireless connection is either EXREMELY SLOW or I get none at all, nonetheless, it still says the connection is Excellent.
Please, if there is anyone who could help or try to help me, I would most appreciate it. If there is more information that you need, ask me and I will try my best to provide it to you.

Admittedly, that IS a strange case. Unfortunately, it sounds like all possible troubleshooting has been done by the tech support agents. you mentioned that you were dissatisfied with your other service, did it have a similar problem? theres a possibility of dirty fiber or a bad ONT port, but the random rebooting of the router would almost exclusively be a bad router. question: is the router in the same location as before?

I just wanted to say I am sorry and clarify the situation as it was clarified for me yesterday... Great experience with Palm Customer Support.

I called Sprint yesterday and was treated terribly by tech support because I didn't want to switch devices. They as much as called me outright stupid for wanting to stay with my Palm Pre. Even though they agreed that all four phones were broken out of the box and that I was not at fault. They refused to help on the basis that Palm Pre's were being recalled and no longer would be available at Sprint. I was so upset that I called Palm immediately and found that to be untrue. Thankfully. Despite all the issues I had, I don't believe it was Palm's fault. I believe the Authorized Retailers were selling refurbished phones as new. Especially after finding out that my husbands' Samsung Moment had over 400 hours of talk time a week after he bought the phone. So, after being lied to by Sprint, I called Palm and the Tech's were very helpful and very empathetic and are sending me a replacement phone. They waived the fee since this is to be my 5th replacement and I was extremely surprised at how helpful they were.
Further, this morning I got a phone call from an unknown number... which I almost didn't answer but I did and it turned out to be a Palm Corporate Customer Service Rep who had read some of my "rants" on here. He apologized and we talked for a while about the problems I had with R**** $&*** and Sprint. He then offered to replace the Touchstone I had purchased earlier this month and offered to call me after I receive the replacement and the TS kit to make sure there was no problems... which I believe he will. SO, I am a person who is very happy with Palm. If I am wrong, I will say I am wrong... especially if my experiences could had given people pause about buying this phone. I am sorry. It is truly a great company, who does care about their customers and their opinions.
So, if you do end up being one of the few people who have an issue. Try Sprint once and if they don't fix the problem... call Palm and they will take care of you. I got caught up in a cycle of reading other people examples (and who knows how much a situation is exaggerated) and expected to receive horrible service from Palm. But I didn't and I am glad that I stuck with them.
If anyone reading had a similiar experience from Palm where they went above and beyond the call of duty to restore your faith in the company... please post if you have the time. Thanks again

I am sorry if I didn't explain clearly but Radioshack is the first place I bought my phone from... as an authorized retailer I assumed that if it was new, it wouldn't be broken... but after the first two, I got online and found another story where Radioshack got caught selling a refurb Palm Pre as new. The guy bought it took it home and it had some defect (that I can't remember) and when he went to Pandora App, he found that the previous owner had signed in and it hadn't been cleared out. So.... I don't know... but I agree with you because you still see the problem clearly. Sprint acts as though they are supportive of Palm, but if you have the slightest issue, they throw Palm under the bus and won't back a far superior product. I do agree that there are some issues with the Palm build, but I think that it has more to do with the owner than anything. If you have the time and ability to take care with your Pre, then it will probably last longer than someone who just jams the charger in the port or anyone who doesn't baby the phone 97% of the time. I am sure some people are going to say that you shouldn't have to take sure care with a phone and I agree, but unfortunately that is just the case for now. I have faith that the next webOS device is going to be of a spectacular and solid build quality. And the rep that called me about the charger kit said some about a future device, I don't know if he was just talking in general or if there is actually a device in the makings but I hope so!
http://forums.precentral.net/palm-pre/240804-still-my-1st-pre-proud.html#post2368881
I know there was a post on precentral that talked about who was on their first Palm Pre's and the number was surprising high. I just know that I am still waiting on my replacement from Pre and they could have very easily just grabbed a refurb and threw it in a box to be shipped. But I was assured that a tech was going to inspect the device before it was sent to me and it was shipped two days after my order. So, hopefully dealing with Palm rather than Sprint will be the deciding factor that allows me to finally have a great model of the Pre with no prior issues out of the box. I just hope that there is a new Palm webOS device when I able to upgrade in a year or so. Above is the link for the forums regarding owners who are still on number one, alot of them launch day Pre's. Thanks for your response. Can't wait till Monday

I want to buy a wireless headset for my iPad that will allow me to lissen to a video while blocking out any other sounds in the room yet is comfortable. I do not have any experience with headsets so I do not know what to expect.

I want to buy a wireless Bluetooth headset for my iPad that will allow me to listen to a video while blocking out any other sound in the room. I tried a philips 6000 earplugs but it was not good at blocking out sound. Can anyone give me some suggestions. I see lots advertised but do not know which one to chose.

Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
http://www.headphone.com/

Great experience with new Mac Mini!

I bought a 2.0Ghz Mac Mini a couple of days ago. I'm very pleased with it's performance and adding 2GB Ram doesn't hurt
I can't believe the grunt this little baby can give, it's outstanding. I thought that my old G4 1,33 was a champion, this one is so much better! I have installed VMware fusion it runs WinXP great, for my needs anyway. I'll try Bootcamp soon. Anyway, I love Leopard! There are some things getting used to like the new finder and how mounted SMB shares are presented but I'll get used to it for sure.
Love it!
Oops...gotta update my signature...done!

To echo the above: I've been delighted with my mini (a humble 'ole G4) since "migrating" from Windows just under three years ago.
The best compliment I can pay my mini and Apple in general is that it 'just works' as the "switcher" ads said at that time when I was making the transition.
Although Apple are frequently upgrading and enhancing the range, the great thing is that you don't really feel "left behind" with the latest change. There's a great continuity through the products and, ultimately, I feel it is enough to be a Mac user if the machine/software does what one wants.
Having said that, I daren't visit my nearest Apple Shop to look at the latest Intel minis - I'll only end up wanting one!

Just to share GREAT Experience with Lenovo Service with T61p one long two short beeps

Two weeks ago my laptop just suddenly died for no reason. It was in sleep mode and never woke up. I have researched some forums and found that the best thing to do is try to call the number of Lenovo service. I cannot remember it right now, but please check another thread t61p and one long two short beeps. The laptop was out of warranty and according to lenovo site it was 31. July was the last day for replacement claims, however nobody asked a question regarding warranty or replacement. Lenovo sent the box promptly and whole turnaround was in 3 days.
I was really surprised with efficiency and service.
So, if you are in the same situation please give it a try.
Good Luck!

I have used support service a few times and they have always been professional and helpful the support center in Ga. I called last night for my wireless card its on the way to me now I've never had any problems
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Mac Book Retina, 15-inch, Late 2013 does not seem to work with Adobe Premiere CC 2014

So I have just spent brought the latest mac book 15 inch pro with Nvida, and rendering some screen recording I originally captured in quicktime with a few backgrounds crashes adobe cc, it takes about 4 min, I can hear my mac getting hot, and says a serious issue has occurred and it needs to quit??? I also have FCP and the same footage renders in 2 min and finishes without any issues.
If I change it to software mode still gets crazy hot and after 40min had only got to 40% completed, so that is not a viable option
This seems to be a common topic on the forum without any solutions. here is my error report. Any ideas???

Go to duplicate message Retina, 15-inch, Late 2013 not compatible with Premiere Pro CC 2014
[locked]

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

Reinstalling Elements 11 is not fixing my problem with Adobe Premiere Elements 11

Getting Error Message: Runtime error trying to open Organizer or New Project. Have not been able to open a project, without having an administrator account, so eveytime it's just trying to make a new project. Only 1 user needs this application, but I cannot get it to work for them.
In order to get the message to repeat I will need to log off and back on. Then I can give you an image of the error. Right now it just shuts doen Elements. Here is the Event Viewer message:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 4/18/2013
Time: 1:04:29 PM
User: N/A
Computer: US7004
Description:
Faulting application photoshopelementsorganizer.exe, version 11.0.0.0, faulting module msvcr90.dll, version 9.0.30729.1, fault address 0x0005bb47.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 70 68 6f   ure pho
0018: 74 6f 73 68 6f 70 65 6c   toshopel
0020: 65 6d 65 6e 74 73 6f 72   ementsor
0028: 67 61 6e 69 7a 65 72 2e   ganizer.
0030: 65 78 65 20 31 31 2e 30   exe 11.0
0038: 2e 30 2e 30 20 69 6e 20   .0.0 in
0040: 6d 73 76 63 72 39 30 2e   msvcr90.
0048: 64 6c 6c 20 39 2e 30 2e   dll 9.0.
0050: 33 30 37 32 39 2e 31 20   30729.1
0058: 61 74 20 6f 66 66 73 65   at offse
0060: 74 20 30 30 30 35 62 62   t 0005bb
0068: 34 37 0d 0a               47..

I have tried this on 2 different computers with different credentials. I did try this suggestion too:
http://helpx.adobe.com/creative-suite/kb/microsoft-visual-c-runtime-error.html.
I even made the user an administrator on their computer before installing Elements Premeire 11. They still have the problem accessing it, even leaving the user as administrator.

Not getting all objects with Universe connection

I am using CR 2008 SP2 and I am trying to create my first report using a Universe as the connection. I click on Blank Report and it opens the Database Expert. I then open Universes under Create New Connection and the Universe that I want to connect to is there but when I double click on it to create my query I am not seeing all of my Dimensions and Measures. This is a small Universe with three classes. The first class has 6 dimensions in it. The second class has two dimensions in it of which these are date dimensions and then my third dimension is my Measures dimension that has 4 measures.
I only see 5 of my 6 dimensions from the first class. I see both of my date dimensions from my date class but I only see one of my measures from my measure class. When I create a new WEBI report connecting to this universe i get everything as expected.
Any ideas?

Hi Ron,
Since you are using WebI Rich Client of Edge version I assume you are not using a CMS (you are not required to login when you start WRC). Is this correct ? if so then you might need to make sure your WRC hits the appropriate folder of universes. This can be configured from menu Tools -> Options -> General tab, where you can define a default folder for universes. Make sure you point to the folder where your latest version of universes are (locally or on a remote machine). Your WRC will always load the version of universe that is stored in that folder.
Hope this helps
Abdellatif Astito
SAP Business Objects

Experiences with Adobe XPAAJ, XML Parsers, OC4J /AS 10.1.2,10.1.3 and DB10g

Over the past couple of weeks we have been working on a solution which uses the newly available adobe XPAAJ api's (XML/PDF Access API for Java) for Java.
The client has a legacy requirement to where users are issued with a pdf form which they complete, save and upload to the server via a JSP. A neat bit of Java code utilizing the XPAAJ API's then strips out the form entered data and spits out XML. This is then parsed and inserted into relational tables within the schema.
Our solution needs to be deployed to an Oracle stack. However we ran into a number of problems when deploying the solution to AS 10.1.2. The adobe API's are not compatible with the Oracle XML Parsers. When extracting the form data, no error is reported and the code which performs the xml parsing just fails. Very nasty.
The main problem has been that Oracle XDK libraries have been hard-coded into the classpath of the container using the referential JAR file Class-Path mechanism. Altering this has required the use of the JRE extension library mechanism, or altering the boot classpath of the JVM when it is launched to load the alternative XML parser implementation instead. While this works, it has been an unsupported operation since the effect of this change is not limited to a specific application – it’s effect are felt across the entire container and this may lead to unpredictable results at runtime.
~http://www.oracle.com/technology/tech/java/oc4j/10131/how_to/how-to-swapxmlparser/doc/readme.html
We did look at a number of other solutions including embedding the java classes I'd written into the database. After loading the apache Xerces api's into our schema we hit upon the same problem. It seems that the same thing happens in the database and the Oracle XML parser is used by default.. Please see SR Number : 6153038.994 on Metalink.
If you can upgrade to AS 10.1.3 then you can follow the excellent how to at:http://www.oracle.com/technology/tech/java/oc4j/10131/how_to/how-to-swapxmlparser/doc/readme.html . Demo code can be found at: http://www.oracle.com/technology/tech/java/oc4j/10131/how_to/how-to-swapxmlparser/how-to-swapxmlparser.zip
The how-to details how to swap xml parsers within the application server.
Other possible solutions that are also available include:
- Shelling out to the OS from the DB or Apps Server, You can then execute the app as a command line app with a custom classpath. Very bad architecture design.
- Setting up an RMI client / server application where client is the db or apps server. You can find examples of this on the web. google 'Simple RMI example'.
- Bootstrapping the XML parser in AS 10.1.2 (unsupported).
I hope people have found this informative. It might save someone a lot of time.
Message was edited by:
Kris Jones

"When I was installing SOA 10.1.3.1.0 on oracle 10.2.0.1 and it was giving error that it needs minimum 10.2.0.3, just wondering 10.1.2.0.2 + SOA =will this work?"
so you talk about the db version. SOA 10.1.3.x runs on 10.2.0.1 and above (I ran for the longest time on XE) and if I remember correctly that's a warning, and not a hard prereq.
Regarding Appserver versions - soa 10.1.3 runs on AS 10.1.3 only

Error message not authorized for use with Adobe ID

I just started getting this error message when I transfer EPub books to my KOBO. They are e-books from the public library. I am asked to sign in with the authorized Adobe ID, but I thought I had done that when I set up Adobe DE 3.0

I tried many things, but what worked in the end was a suggestion from a thread last year. I opened my KOBO and signed off. Then signed back in. That seems to have done the trick. I can now download library books to ADE then transfer to the KOBO and actually open them. HURRAH!! I mainly use my KOBO to read library books and was panicing about losing access.
Before that fix I reauthorized my computer and my KOBO.

I had a recent not so great experience with Adobe Connect

Similar Messages

Maybe you are looking for