Has anyone anywhere managed to get "AIR Native Extensions" to work with Flash CS 5.5?

I'm trying to integrate Adobe's "Gyroscope" example of ANE to work from Flash Professional CS 5.5.
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/gyroscope.html
Apparently, one has to use the somewhat crude "ADT" command-line tool to build an app that uses Native Extensions.
Unfortunately, I cannot get past the numerous errors ADT is throwing at me.  The latest is:
unexpected failure: inputs not set
java.lang.IllegalStateException: inputs not set
          at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:62)
          at com.adobe.air.ADT.parseArgsAndGo(ADT.java:556)
          at com.adobe.air.ADT.run(ADT.java:413)
          at com.adobe.air.ADT.main(ADT.java:463)
Unfortunately, I'm not an advanced developer, so I really don't know what any of that means. (But I'm sure if I can just get this one example to compile and run, I'll be better able to perform the necessary tasks in the future.)
Can someone PLEASE help me?
Thanks.
Mike

If you are looking for input from others, you are more likely to find people with either similar problems or complaints in the Flash General Forum (http://forums.adobe.com/community/flash/flash_general?view=discussions) rather than here in the Actionscript 3 forum.  If you scan thru it for the past few weeks/months you might even find someone with the same problem.

Similar Messages

  • Has anyone successfully managed to get VZW to raplace Fascinate with a different phone?

    Has anyone successfully managed to get VZW to raplace Fascinate with a different phone?
    If so, could you share with me on how you convinced VZW to do it?(which department?)
    I love my Fascinate, but not when it can't get calls.  I would prefer to have a Fascinate with
    zero problems, but that appears unlikely.   So I guess my best option is to get a different
    phone(Samsung, Motorola, or others)
    Thanks!

    I successfully got a swap out of my Fascinate with a Droid Incredible 2. 
    I private messaged VZW agents on these forums the following message and through the course of 3-5 days I successfully was granted an expception and allowed to swap out my device (with no contract extension or upgrade eligiblity extenstion). This was after several phone calls and numberous wasted hours trying to convince them the Fascinate was not a good phone. 
    If I have been rude in any way during this message, I sincerely apologize, I did not mean it. I am a frsutrated owner of a bad piece of electronics. I am aware it is not VZW's fault, but I think you need to stand beind the phones you sell and rectify situations that are bad. 
    I am a Samsung Fascinate owner and to say the least this phone has been the biggest source of frustration I have ever had to endur in the 20+ years I have owned a cellular phone. 
    The have been number rous issues with my original phone and the replacement (certified replacement) phone I have gotten. These issues include, but are not limited to:
    1. glitchy UI
    2. constant forecloses and freezes
    3 auto reboots 
    4. inoperable phone for 20 - 30 minutes at a time. Can't access apps, can't make calls, can't send texts, phone is useless to me.
    5. not receiving calls/texts
    6. missing voicemails
    7. increased battery drain
    8. random flickering of screen lights while using the phone.
    Now I have performed the following steps at the suggestion of VZW tech support on both my orginal phone an replacement phone
    1. Hard resets, factory resets 
    2. Soft resets,
    3. Clear cache on the phone
    4. Removing apps 
    5. Updating roaming capabilities 
    After all these issues and all the suggestion on fixes, the phone still performs poorly and is not a reliable phone at all. Like I stated previously i am beyond frustrated. 
    I am aware these problems are software issues not a hardware issue; a refurbed Fascinate will not correct them. Hard resets do not fix the problems. I have scoured the message boards on this website (VZW forums) and I am aware the VERIZON is aware of all these issues with multiple Fascinate users.
    I am asking to be allowed to swap my Fascinate for another, DIFFERENT model of phone. I am fine if that is a refurb, as long as it is a DIFFERENT model of phone and not a Fascinate. I know this is possible because users on your very own forum are stating it has been done. I am asking it be done in my case
    Best thing I can say is stick to it....sitck to you guns and don't back down and don't be allowed to think there is afix when there is not. 

  • Has anyone ever managed to get a 'new' iphone 4 replacement, not refurbished!

    Gone through 3 'replacements' now. First (original) had an antenna problem, the second one had pixel issues and the present one has awful, truly awful battery drainage! Enough is enough! Getting tired of all this. Has someone ever managed to get a new iphone 4 replacement which is 'new' and not been refurbished? I was told last time after complaining to the apple care CS that the express service they provide doesn't use 'refurbished' iphones and has a seperate stock. But thats obviously not true since the 'express' one has turned out to be a dod as well!
    No chance in **** I am getting another apple product in the future...

    Thanks. I've read the warranty terms and other threads on here regarding it but I wanted to know if someone HAD personally gone through something similiar and escalated the matter to the higher CS at AppleCare. If yes, did you get a different result and what was it? Thing is the last time this happened and I got send my present 'replacement' iphone 4 (one with current battery issues), I fell for the whole 'Express Service' (which apparently doesn't use refurbished iphones). This seems a blatant lie since I find it hard to believe that a new phone would have such serious battery issues. Have I just been really unlucky or is this a common theme with replacements?
    Would be interesting to know the views of anyone who received a 'refurbished' replacement and is still going strong. Or anyone who has actually managed to speak to the higherups at AppleCare? (people who would think twice before lying to your face since the CS I've spoken to say anything to end the call).

  • Has anyone ever managed to get a refund out of BT?

    Four months ago I emailed to cancel my broadband account. Naturally it wasn't actually cancelled, and I've spent the following months getting it cancelled and getting a final final bill. But the last month has been spent with no success at all trying to get the credit on my account out of BT's bank account and into mine. I've even been asked for my bank details again, and given them - only to receive no reply, and more importantly no money. And now nobody answers my emails, not even to fob me off for another fourteen days while nothing happens. (And I'm not daft enough to waste my time phoning them!)
    Has anybody ever managed to get an actual refund rather than an account credit? Or is this all just a waste of time?

    Huh. You know, that hadn't occurred to me. I was going to ring my bank today, but Saturday I finally got an email claiming that I'd get a refund in five working days. I've heard it all before, so I'm not expecting anything to come of it, but you've actually given me a way to get my money back, thanks!

  • Has anyone managed to get a PS3 Controller to work with OSX Lion?

    Hi,
    I wanted to connect my PS3 controller to my iMac (late 2011) using bluetooth but have been unable to do so. It will connect for a brief time but then it will lose connect as it has not paired. It also asks me for a pairing code. I have tried 0000 and this does not work. I have searched the internet and it seems this is a common issue. Has anyone managed to get it working?
    Does anyone know if Apple plan to fix the issue with a forthcomming update?
    Cheers,
    Tim

    There are numerous threads on this, please use the "More Like this" tool, you will find it on the right. I'm not sure if anyone has any solutions but that is the logical place to start.

  • Has anyone been able to get a Canon LBP6000 to work in Lion?

    Any help with getting my Canon LBP6000 to work would be greatly appreciated.

    There's a new driver on the USA website:
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
    Before installing you will need to trash the CAPT folder, located in HD > Library > Printers > Canon. And perhaps restart.

  • Does the MacBook Air power extension cord work with 230v?

    Hello,
    I understand that the MagSafe power adapter supplied with the MacBook Air is compatible with an overseas input of up to 230v, as printed on the adapter itself. However, the extension cord supplied with the laptop states 125v. Furthermore, even the small plug connected at the end of the adapter states an input of 125v. Does this mean that the plug and the extension cord are incompatible overseas at 230v, but the adapter is? Then, how must I connect a MacBook Air to a 230v outlet? I do have an outlet converter that does not transform voltage. Thank you for your support.
    (The adapter states it is compatible with 100v-240v, however, the circled plug is only compatible with 125v.)
    Mukund

    Yes, for the most part...
    If you get the AC in-cord to the Adapter with your regional plug on it,
    then the need for any other shape-converter or plug kit would vanish.
    Here's an example of the Apple (UK) world traveler kit for power adapters:
    http://store.apple.com/uk/product/MB974ZM/B/apple-world-travel-adapter-kit
    The part number (less UK) would be similar across all Apple Stores online
    & regional stores should have them in stock to match local/traveler shapes.
    Another example of regional parts with local plug ends, otherwise automatic
    conversion built-in, can be seen among these UK Apple Store items. {The US
    store has the local ones for North America; the AU store, for there, etc.}
    http://store.apple.com/uk/browse/home/shop_accessories/all_accessories/charging_ devices
    (You should be able to buy the Apple AC cord, for a MacBook/Air/Pro power
    adapter, in the region where you hope to use it. -- Better to have the whole
    device, in case you don't find an Apple Store or authorized reseller w/ Cords.)
    Other stores with the generic end-fit shape adapter w/o power conversion
    may be found in major cities near airports or border points. Luggage stores
    and travel accessories, or a travel outdoor outfitter, such as REI, Inc.
    And then, there are those kits with a power conversion adapter & transformer
    inside; these should not be necessary with any Apple product that has a near
    universal automatic AC power switching capability built into it. You can get a
    local regional AC power cord with the local plug affixed, or use a basic kit.
    Each online regional Apple Store sales pages show these kinds of products
    with their local power plug version, so it is possible to buy the replacement
    AC cord with the correct local plug on it. No further modifications necessary.
    {Another device that won't do much good, if you can't adapt, is a DC-to-DC
    adapter; this would need to have a MagSafe cord on the exit (output) end
    so as to avoid the MagSafe adapter altogether. Such as on a boat or a train
    where you may find no AC power, only DC. Uncommon, but possible.}
    Good luck & happy computing!

  • HT3669 My HP Officejet J4680 is now useless in OS X 10.8, has anyone had success in getting the HP printer to work in Mountain Lion

    I recently installed Mountain Lion, now my printer/fax/scanner is useless. If anyone has been able to fully use an HP Officejet J4680 please let me know how to get it to work, I am strongly considering on restoring my iMac to Snow Leopard where I can take advantage of my peripherals.

    For users who's printer/scanner does not have a compatible driver from their manufacturer:
    How do I scan or print with the driver from Apple Software Update?
    Depending on your printer and the type of driver update, you might need to scan in a different way than you did before you installed Mountain Lion.
    Scan from the Print & Scan window:
    Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
    Click the Apple menu (# ), and then click System Preferences .
    Click Print & Scan (# ).
    Click your printer in the left pane.
    Click the Scan tab, and then click Open Scanner .
    Click Show Details . The details of the scan display, including options to change scan settings.Figure 5: Show Details scanning screen# Image: Show Details scanning screen
    Change any settings as necessary, and then click Scan .
    NOTE:
    Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
    Hope this helps

  • Has anyone been able to get a mouse scroll wheel to work with a scrolling text box in authorware?

    Has anyone been able to get a scroll wheel to work with a
    scrolling text box in authorware? Is there any way to attach the
    hardware of a scroll wheel to a scrolling text in a piece? Sure
    would make things easier for the reader.

    I doubt it. Maybe using the WinCtrls.u32? But after a few
    tries years
    ago (before the WinCtrols.u32), I'd pretty much given up.
    Erik
    edwin e wrote:
    > Has anyone been able to get a scroll wheel to work with
    a text box in authorware?
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - eLearning
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    Authorware Tips!

  • Has anyone else managed to speak to a human being in the App Review team

    I have had my app rejected twice on the basis that they think all the functionality can be incorporated in an epub format even though the epub format explicitly can't support what my app does. But every time I try and contact the team, it is only allowed via email (with very long waits for responses) and I just a standard script response, e.g
    "2.21: Apps that are simply a song or movie should be submitted to the iTunes store. Apps that are simply a book should be submitted to the iBookstore".
    Even when I appealed I just got the same script back and I keep being told that I can't talk to a human being.
    Has anyone actually managed to speak to a member of staff in the App Review Team and could you give me some advice as to how I can do this. The process has been dragging on and all I need is a 10-minute discussion with a human being,
    Thanks,
    Dave

    Thanks KT.
    I did get a phone call after a few days and it did end up as a useful conversation.
    I do think though that there should be contact numbers so that developers can actually ring a named individual in the App Review Team. I was really surprised that the Apple switchboard said that they were unable to connect incoming callers to specific teams or members of staff. As a Customer Service experience it seems pretty poor.
    Anyway, the member of staff in the Review Team was helpful and we are making some of the suggested changes and resubmitting the App.
    In terms of ePub functionality, it actually can't do everything the App can do as there is no way within an ePub of changing navigation based on whether you are using an iPhone or iPad. There are a lot of things you can do (in fact you can build an HTML5 app within an ePub if you want) but whether an ePub format is appropriate for all the things you can do is another matter. That is a discussion for another day ...

  • Has anyone been able to get a repair/proper fix from Apple for their LCD?

    The more I use my Macbook Pro while traveling the more i notice the 'sparkly/grainy' display. Compared to the White/Black Macbook it is obviously noticable what i'm talking about - especially on white backgrounds. My question is - has anyone been able to get a proper repair/fix for this common problem for the Core 2 Duo 15" Macbook Pro's?
    I normally have my Macbook Pro connected to an external display but when i do take it along when I travel it stands out more and more every time.
    Is Apple going to issue a 'recall/repair' for their customers who bought their Macbook Pro's? What am I to do here, When i need to use my laptop when I travel I can't take the annoyance of using this LCD screen.
    C2D 2.16 2GB   Mac OS X (10.4.8)  

    Yes, I can CLEARLY see it, it's like wearing glasses that are filthy. The laptop is one week old and I could see it from after the 802.11n upgrade. This is not all that zoomed, really. To me it looks like a video memory problem, not a LCD problem. The problem is the same if I connect an external DELL monitor. Also very visible there. Also very visible if I change resolutions or number of colours. The main reason I believe it's a video memory thing is that when I move a window, it changes from white to, well... yellow and red. Check out: http://niklas.saers.com/MBP/MG8665.jpg That is why I am unsure if this is the kind of grain you are talking about. Can you confirm that this is the kind of problem you guys are seeing?
    PS, I use a Canon 20D with a 100mm f/2.8 macro lens.

  • What code signing certificate has to be added for Adobe Air Native Installer?

    Hi,
    I'm developing Adobe Air application. I need to digitally verify the application to add the publisher's name with the product. I did a little research and came to know that Symantec, Thawte, Comodo, Comodo-Tucows, Digicert, Godaddy and couple of others are doing this.
    Yes. I'm talking about the Code Signing Certificate. My question is, What code signing certificate has to be added for Adobe Air Native Installer? The reason is, The native installer will have an extension .exe ( Windows ) and .dmg ( MAC OS X ).
    These guys are providing certificate for Adobe Air. For instance, If the application is exported using Native Installer in Windows, The application will have an .exe extension. For this, Can I use the same Adobe Air code signing certificate or Should I go for Microsoft Autheticode ( for .exe ) certificate?
    Thanks in advance.

    I think comodo code signing certificate is one of the nice option to be added for Adobe Air, as i have seen comodo code signing certificate in other adobe programs. Recently i bought comodo code signing from https://cheapsslsecurity.com/comodo/codesigningcertificate.html, to sign one of my adobe application and it works fine, you can use microsoft authenticode technology with comodo code signing.

  • Has anyone been able to get a canon mp 780 to scan in lion

    Has anyone been able to get a canon mp 780 to scan in lion. I have tried everything and nothing works.
    Image capture won`t recognize my printer either.

    People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
    Click the Apple menu ( ), and then click System Preferences .
    Click Print & Scan ( ).
    Click Scan , and then click Open Scanner .
    Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
    Change any settings as necessary, and then click Scan .
    The next window looks like this:
    Hope this helps

  • HT1923 Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

    Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

    Just wondered if anyone had any other suggestions.

  • Has anyone else had trouble getting your PC to recognize the Ipod

    Has anyone else had trouble getting your PC  to recognize the Ipod

    Try the steps in this Apple support article:
    http://support.apple.com/kb/TS1538
    Regards.

Maybe you are looking for