Has anyone ever accidentally washed an ipod and had it be okay???
OK, checked all the coat pockets, got out the lip gloss, the kleenex's all that crap, but for some godforsaken reason, I missed the ipod mini; spin cycle finished, go down to move them from the washer to the dryer, I hear something drop down into the bottom of the washer, to my horror, when I peered down into the gray speckled tumbler, there it was, the sopping wet brand new ipod, earphones still around the lovely soaked leather case it was enclosed in....stomach feels like it is going to explode, head is numb, heart is racing like its going to burst, now what do I do? Please let me know of any ideas, other than racing out in the middle of the night to buy a replacement (which is looking like what is going to happen) I have it sitting in front of my woodstove right now, attempting to dry it out, hoping it will not melt and further destroy the poor little gizmo---anyone with a similar situation please advise....tomorrow is not going to start off well, when and if I have to break the news to her that Mom has wrecked her precious pod.....
Dear btabz, your advice was perfect, iDid let it sit for a few days, near our woodstove, and let it dry out completely. iThen hooked it up to the iTunes on the computer and lo and behold, she charged up just fine and updated all the music that had since been added, it works like brand new, iHowever, had to buy my daughter another one in the interim, becuz it was my fault iWashed it, so now iAm the proud new owner of my own iPod nano, it's kinda neat having one, iAm the hippest 41 year old mom at my work (ha ha ha), so let it be known that an iPod can be put through the proverbial "wringer" and still work, iThink iWas just lucky though, iDon't suggest doing it (hee hee) unless like my incident, it was truly a big horrible mistake. Thanks again btabz for your infinite wisdom regarding my situation.
Similar Messages
-
Has anyone ever tried to manually install and OOTB connector?
I am looking to automate the installation of some OOTB connectors in OIM 11gr2(11.1.2.1) with the OUD and AD connectors. Near as I can tell, most of the connector installation can be done with Deployment manager. I just need to figure out the right way to copy the jars and resource bundles to the correct location in the DB. Has anyone done this successfully? Any help would be appreciated.
Yes, automation is possible.
OIM provides API to import OOTB xml/properties into OIM.
But its recommended to use OOTB connector installation procedure. The OOTB connector installation procedure stores the connector version which can be helpful during connector upgrade operation.
I will suggest to use OOTB connector installation procedure to maintain connector version history.
J -
Has anyone ever green screened a subject and then had it tilt up to a logo?
I have green screen a lady talking and after she it done speaking I wanted it to tilt up to a logo.
Put the logo on a new layer, make it 3D and rotate the x axis. Basic AE
-
Mine went down to 37C, then back up to 59C when I left the computer off overnight.
It did this after every attempt to solve the problem by flashing the BIOS.
Also, the NB temperature stays at 45C even on the first boot after flashing where the CPU temperature temporarily changes. Does this happen for other people too?Quote
Originally posted by moinerus
I've had about 3 emails from MSI regarding both the power light goin out and temps not being correct on a cold boot, hopefully their fixin and 1.2 will be soon.
lol for every bug we send them its gonna take them another week to release 1.2 -
Has anyone ever ran Logic using VMWare Workstation on a Windows PC?
Has anyone ever emulated Mac OS X and used Logic on their x86 Microsoft Windows systems? I was thinking about doing this to use some synths and stuff with some Windows designed software. I'm not sure if it is possible to use both operating systems at the same time with VMWare Workstation operating system emulator. Help me out guys. Has anyone ever done it? Can it be done?
VMWare Workstation will not run the client version of Mac OS X in emulation, and likely won't run Mac OS X Server either.
(32050) -
has anyone ever had this problem and know how to fix it ?? I upload songs on to my ipod and they appear on my ipod in itunes but after i disconnect (the correct way) the songs do not appear on my ipod. If i plug the ipod back into my computer it still shows them as being on my ipod through itunes but not when i disconnect please please please help!! thankyou! (Also the songs i'm trying to upload are cd's that i have brought)
See Grouping tracks into albums, in particular the section Missing Artist or Album not with others by same artist.
tt2 -
My screen has streched out real big and the touch screen is difficult to use and can't return the screen to normal size.Has anyone ever experienced this?
Double-tap the screen with three fingers, then go to Settings and disable the Zoom function so you don't accidentally trigger it again.
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook. -
HT201413 Has anyone ever been able to contact the apple ipod software update server?
I am coming up with a 'can not contact apple ipod software update server'
Has anyone ever been able to contact the apple ipod software update server at all and if not is there a way to contact them directly?yes. you may need to reset your network settings. settings - general - reset - reset network settings.
then reconnect to your wifi and try again -
I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?
Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I have a Macbook Pro, and I cannot get onto my my job's wi-fi network. Has anyone ever had a problem getting on a wi-fi network at your place of employment? I have a username and password for the network, but when I try to go through the Connection Assistant and put in my password, it says its the wrong password.
you need to contact your employers IT department.
-
Has anyone ever had the icons on the menu magnify? My phone slipped onto the floor in my car and icons are now hugh. Don't know how to fix it.
Double tap the screen with 3 fingers.
Stedman -
My purchased download of Photoshop Elements did not work and I have been trying to reach a real person at Adobe. Has anyone ever been able to do that. If so can you tell me how to do that.
Hi vision4success ,
I would like to gather some information regarding your issue, So, please answer the questions below:
What is the exact issue that you are facing?
Do you get any error while installing Photoshop element?
What is the Operating System that you are using?
Since when you are facing this problem. Has it ever worked for you?
What all steps did you try from your end?
If you have any other details regarding the issue that might help us, please feel free to mention that as well.
Waiting for you reply.
Regards,
Sarika -
Has anyone ever lost a ringtone that they purchased and downloaded a ringtone and then it just completely disappeared? When I tried to download it again I got the message "You've already purchased this item; are you sure you want to buy it again?"
You are aware that there the app may have downloaded and been placed on the second screen. Not the main one. Can you swipe to the right to see if it is there?
-
Has anyone ever had an email from Apple on IPad asking them to update their account details? The email seems genuine enough as it asks you to sign in with your Apple ID and password and takes you through to the Apple site but am a bit worried as they ask you in the section Update Your Apple account for bank and credit card details and for the security number on the back of the card. Also in the section where it asks for my mobile number it will only take 10 numbers and when ai try to put in the final (11th number) it won't let me. Sorry am new to all this and a bit confused! Any help is gratefully appreciated.....Thanks.
That is phishing attack
Someone, other then Apple, sent it to you
Read http://support.apple.com/kb/ht4933
Allan -
Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?
Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?
Maybe you are looking for
-
I'm an advertising graduate student that relies heavily on Adobe programs for my multiple simultaneous projects throughout the school year, specifically Photoshop, Illustrator, InDesign, Muse, Edge Animate and Premiere Pro. I'm using a MacBook Pro ru
-
I just got my iPod yesterday and I've tried to connect to my windows and iTunes n it says error n won't connect sync or anything please help...I've read other people's post that have the same problem.. But I need to know for myself .. It ***** get al
-
Error while checking in document using CV01/02N
While trying to check in a document I get an error saying: Error while checking in and storing: C:\Documents and Settings\sarita\Desktop\9011_SND_. This is while trying to check in from my desktop. The content server and the repository have been defi
-
ITunes downloading error (-50)
Help!!! when i try to download purchased music from iTunes i keep getting the following: "There was a problem downloading (X track)...An unknown error occurred (-50). please check that the connection to the network is active and try again." well i di
-
How do I set-up Automator to open Mail when I start up Mac OS X?
How do I set-up Automator to open Mail when I start up Mac OS X? Provided that this is how I would do it.