Has anyone tried to actually get a hold of apple support and had them reply

Have been attempting to get apple support for over one hour - continue you to receive notice that I will have assistance in two minutes
Nothing happens
I wish to link my phone with my car - having difficult time of it

Are you trying to use Bluetooth?
Please see iOS: Troubleshooting car stereo connections - Apple Support
Bluetooth
Car stereos with Bluetooth may allow you to pair a device that can play calls or music through the car speakers. Ensure that your car stereo supports the A2DP Bluetooth profile before attempting to pair an iPod with it.
Note: iPhone can also connect using the HFP Bluetooth profile because it uses HFP to make phone calls through your stereo speakers. iPod devices do not have this protocol (because iPod devices aren't phones).
You can check for the A2DP Bluetooth profile by attempting to play music from your iPhone through your stereo speakers using Bluetooth. If calls route to the stereo speakers but music doesn't, it might not support A2DP. Contact the manufacturer or refer to your car stereo's user guide to see if your device is compatible.
The BT profiles supported by iOS are iOS: Supported Bluetooth profiles - Apple Support.

Similar Messages

  • Has anyone else received a phishing, "Urgent Alert From Apple Support"? It came to my actual iCloud email address.

    The message is very clearly bogus, full of errors of every kind, right from the start: "Dear Apple Custumer,"
    The fact that it came to my own iCloud address worries me since usually such schemes are to a broad group, like "[email protected]"
    I have forwarded the email, with Long Headers, to the fraud-combating websites. Can't find any hint on apple.com/support as to where at Apple itself to direct it.

    Re: Has anyone else received a phishing, "Urgent Alert From Apple Support"? It came to my actual iCloud email address.
    YES today in the UK, the email text is as below, together with several Links to "Apple" sites and an Apple logo and European support address.
    Fairly crude but could fool naive users.
    Any one know how to get to the addresses behind the links without clicking them?  Just copying and pasting as plain text doesn't seem to work. Any other way just copies the Hyperlink.
    Scam Text in square brackets:
    [This is the final notice to inform you as of 30 - January - 2015 that you have not yet updated your account information. Under "Know your Customer" legislation Apple Inc is required to perform a verification of your information, failure to do so will result in account termination in less than 48 hours.
    To stop the termination of your Apple and iCloud please validate your account information before the deadline.
    Please continue to Validate your Apple/iCloud ID »
    Sincerely,
    Apple Support]

  • Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

    Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue. 

    You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
    myc680.local> version
    Current Version
    ===============
    UDI: C680 V FCH1611V0B2
    Name: C680
    Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
    Model: C680
    Version: 8.5.6-074
    Build Date: 2014-07-21
    Install Date: 2014-07-29 11:16:34
    Serial #: xxx-yyy1611Vzzz
    BIOS: C240M3.1.4.5.2.STBU
    RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
    RAID Status: Optimal
    RAID Type: 10
    BMC: 1.05
    There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID.  You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
    myc170.local> version
    Current Version
    ===============
    UDI: C170 V01 FCH1428V06A
    Name: C170
    Description: Cisco IronPort C170
    Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
    Model: C170
    Version: 7.6.3-019
    Build Date: 2013-06-09
    Install Date: 2014-09-12 13:52:24
    Serial #: xxxxxxD87B39-yyyyyy8V06A
    BIOS: 9B1C115A
    RAID: 02
    RAID Status: READY
    RAID Type: 1
    BMC: 2.01

  • I have sent my iPhone for repair, but the case has the wrong description, I have called and talked to Apple Support, and told them the actual case and they told me thats what it was for and my Warranty covered it.. When will I get a new iPhone or mine?

    I filed for a case and my One-Year warranty is still available until Jne 2014 , somehow the description in the case is mixed up and says it was cracked or dropped, but the real reason is the Audio goes out on my iPhone 5 after the iOS 7.1 update every 20 minutes and I have to restart it. I talked to apple support and they told me my warranty will cover the audio issue, but it still doesn't say that in the repair description. How can I see that? or will they already know? Apple has told me that they will, but I don't want it to be mixed up and me have to pay for something and it not being my fault.

    Besides checking the support status assuming you filed the case with your Apple ID, there is nothing more you can do. Nobody here knows that as nobody here works for Apple. We are users like you. Apple does not monitor this forum. You will have to contact Apple support for the information if you cannot get it the way I described.

  • HAS ANYONE TRIED THE BELKIN LEATHER CASE FROM THE APPLE STORE?

    Hey I was wondering if anyone had tried the new Belkin case from the apple store?Most of the reviews were good but does this case have a belt clip?Does it scratch the screen?How good is it?Worth buying?
    Any feedback will be greatly appreciated.

    Here's what Apple recommends:
    http://support.apple.com/kb/ht3226#iphones
    Especially this part:
    Keep liquids away from the product.

  • I live in chennai, india.i had purchased macbook air from usa in jan 2011. in feb 2012 suddenly my display went off. i took it to the apple service centre. They informed me that the logic board has gone.how do i contact apple support and ask them

    I Live in Chennai. I had purchased a Macbook Air from USA. on 8th Feb, Suddenly the display just went off. I would like to know the following
    1) How and where to contact apple people to make a complaint in usa
    2) Does apple use such substandard products that as soon as one year is over immediately the product fails?
    Kindly help me what to do and get it repaired free of charge.
    Thanks,
    Regards,
    SOnal
    Sanghvi

    Sonal Sanghvi wrote:
    1) How and where to contact apple people to make a complaint in usa
    http://www.apple.com/contact/
    2) Does apple use such substandard products that as soon as one year is over immediately the product fails?
    No.
    Kindly help me what to do and get it repaired free of charge.
    If you didn't purchase the extended warranty, AppleCare, you are not entitled to any repairs free of charge once the 1 year warranty expires.

  • Has anyone tried pre-compression to improve image quality?

    I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
    Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
    My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
    If you think I should post over at iDVD forum please let me know.
    Thanks in advance,
    Mike

    What you want to do does not make sense. You are going to ADD more compression
    iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
    The more you "step on" your video before it goes to to iDVD the worse it will be.
    You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
    The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
    Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
    Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
    It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

  • Has anyone tried to get a refund for Lion Server yet?

    It's clear why server is only $50 now.  Some of the new features looked very promising, but this product is completely crippled and dumbed-down compared to Snow Leopard Server.  Once I accepted the fact that it is not possible to upgrade an existing 10.6 server to 10.7, I gave up on that and simply tried to do a clean install and start over from scratch.  All I'm trying to do is set up a few network accounts that can connect to the iCal and Address Book services.  It simply does not work.  It is not possible to create an Open Directory master on 10.7 Server without some kind of failure along the way.  I have clean-installed 5 times now, and it just doesn't work.  Local users seem to work ok, but network users, which you must use if you want to work with the Profile Manager, simply do not work.
    I am rolling back to my clone of 10.6 server now.  I am curious if anyone else has given up on 10.7 server and tried to get a refund from Apple yet, and if so, what the outcome was.

    Yes, and I have received word that my credit card will be credited shortly.
    I hope to be able to upgrade to Lion Server at some point but it is increasingly clear that Lion Server is not yet ready.

  • Has anyone tried to get the customer_id/site_id in ireceivable module?

    Has anyone tried to get the customer_id/site_id in ireceivable module? Please let me know which class to look into to get the cust_account_id and site_id/site_use_id in ireceivable module. We need to control the access in our custom pages based on the user access (at the customer account level or only at the customer site level).
    Thanks,
    AJ

    I saw the set hibernet mode to 0 trick and it failed.  Guess I can try 3 because reinstalling OS X did nothing but cost me another few hours and a little faith in Apple.  Getting annoyed as I see how many people complain of the identical issue and the fixes are variable and random.  Suggests to me that it is a major design flaw in the hardware and Apple got too cute with the just works idea and didn't put a damned power button on the display so there is no manual way to do it and no 'insert a pin here' type trick to reset the thing.
    Asking for a refund tomorrow.  Past the 14 days so maybe they'll say no but if so then every time this happens I will swap it out.  At least then I know it is a three hour fix and as I was working on this for hours today it occurred to me that if the trick is to do 57 different things and maybe one will work then that is not why I made the switch to Apple.  I could plug everything in on my PC and it all 'just worked'.
    Really poor customer service - the support folks are very nice and I am sure they know that this is a systemic issue but aren't allowed to say so.  Feeling pretty stupid for going on faith right about now.

  • Has anyone tried to pair the Tzumi bluetooth headphones to their iMac?  My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected".  Multiple attempts get the same result.

    Has anyone tried to pair the Tzumi bluetooth headphones to their iMac?  My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected".  Multiple attempts get the same result.

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

    Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

    Just follow the directions here:
    http://support.apple.com/kb/HT5661
    That's all you have to do.

  • Does anyone know how to get a hold of someone in charge of QA

       Customer support is dire! I have spent long hours dealing with costumers service <whose only modes of help are sending me out to buy something new or provide me with a hyperlink to help page that was two clicks away anyway> Between thier lack of knowledge and SARCASTIC JABS it's amazing that I have retained my sanity. I won't go into details but I'll catch you up. 4 sessions in live chat with LOOOONG delay in between responses and I can not make recovery disc, my phono jack does not function properly, my system can not communicate MTP <you know, what you use to fill your ipod, and I kid you not there is a fan LITERALLY RATTLING AROUND inside my 2 month old notebook. So what do I do? I exhaustively seach for away to get a hold of customer service, and all I can find are blogs about how HP costumer service sucks. Bear in mind that I did not put suck into my search engine. I put "HP QA and HP customer service" into google and what returned was BLOGS ABOUT HOW HP CUSTOMER SERVICE SUCKS. Those were the most relevant results in google. So I finally come to this forum and find a thread about..........you guessed it hp customer service sucking.....but oh no an HP moderator locked it down and provided a link to the page where one can obtain the very customer service that has been deemed insufficient by the very COMMUNITY that it is supposed to support. WE PAYED YOU PEOPLE! YOU ARE HERE FOR US NOT WE FOR YOU.
     Does anyone know how to get a hold of someone in charge of QA
    I will eventually shake the correct bush and flush someone out and I will share my information.......any advice COMMUNITY?

    Hi zach317,
    Thank you for visiting the HP Support Forums.  As stated in the thread you have cited, the purpose of this forum is to give feedback or make suggestions on ways to improve the forums.  Should you have feedback on other issues, please contact HP directly using this link.  This is a user-to-user forum, so you'll have to use this link for direct assistance from HP.
    Many members of the community are extremely knowledgable. If you're having an issue you believe the other users in the community may be able to assist you with, please feel free to find the appropriate forum and post your question there. 
    Should you have any further questions or concerns, you can send a Private Message to me or another moderator or admin at any time.
    Thank you!
    Message Edited by SandyD on 11-22-2008 03:03 AM
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

    Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
    I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
    I believe this is a bug, and wonder if anyone else has encountered it?

    Mac Fool wrote:
    Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
    i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
    here's a similar discussion from the Apple TV forum. note the very last post ...
    http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
    JGG

  • Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

    I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

    Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

  • Has anyone tried home sharing between mac and windows using parallels on the same machine?

    I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

    In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Maybe you are looking for