Have a Droid, The beta is crash right and left. Rotating screen, using screen keyboard. What do you need for me to help fix it?
Unable to use this browse as is on this device. I am not sure how to support debugging these issues.
Thanks for the report. This is a known problem on the Motorola Droid. We're working on it, but we don't have a fix yet. Sorry! For some details, see https://bugzilla.mozilla.org/show_bug.cgi?id=602252
Similar Messages
-
I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?
Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again. -
I am setting up a lab of imacs in a school. Our network is windows based using active directoy. I have successfully bound the imacs to our network and can log in using the windows account. However, I cannot access my files. Is there another step?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
I get apparently random crashes when running OpenGL-heavy apps like World of Warcraft and GLTron. I called Apple for this last June, and they ultimately acknowledged the problem. What I'm looking for here is any known work-around and whether anyone knows if Apple is working on a fix.
What I'm looking for here is any known work-around and whether anyone knows if Apple is working on a fix.
Yes. A more powerful up to date Mac with plenty of RAM. -
I'm getting audio in voiceover recordings only on the right side in playback. How can I adjust the balance? I'm using an external mic and preamp that work fine (both channels) in Garageband, so it's not my recording setup. Balance is Ok using internal mic but the sound is not as good.
When you share your project, use SHARE/EXPORT USING QUICKTIME.
Click Options.
In the Sound settings/Channels, choose MONO.
In the Video settings, choose the codec of your choice (probably h.264) under Compression. -
How do i readjust the right and left speaker in iPod nano 2nd gen.
How do i readjust the right and left speaker in iPod nano 2nd gen.
Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
Also, make sure you are not located in some sub dir that utililizes iTunes.
You can also hit 'ctrl,alt,delete' to see what applications are running on your PC. -
Earphones labeled Right and Left
My wife has an iPod nano (3rd Gen) and she was wondering why the earphones are labeled Right and Left? Is this in case there is a problem? Is there another reason I'm not aware of?
Thanks for answering.Hello legacycaptain,
My wife has an iPod nano (3rd Gen) and she was wondering why the earphones are labeled Right and Left? Is this in case there is a problem? Is there another reason I'm not aware of?
They are labeled that way because each headphone was designed to fit each respective ear more comfortably than the other. If you put them in the opposite way you may feel a slight discomfort with the way the feel than compared to how they are supposed to be worn.
B-rock -
Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim -
What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ??? thanx..............75 yrs old and still swimmin' upstream.........
from : OS X Beta Seed Program FAQ
How do I get a shipping version of OS X back on my Mac?
To get a shipping release of OS X on your Mac, you can simply install the final version of the software you are testing when it appears in Software Update.
How do I leave the OS X Beta Seed Program?
To leave the program, visit the Leave Program page and follow the instructions to remove your Apple ID and your computers from the OS X Beta Seed Program. This will stop pre-release updates from appearing in the Mac App Store on your computers.
You only need to do more than you already have, if you'd rather not see future pre-release updates. -
I downloaded the beta of iMessage, replacing iChat. Now screen sharing does not seem to be available (shaded out.) Anyone have a suggestion?
Hi,
I am presuming you are looking in the Video Menu but are finding you do not have "permission" to enable Screen Sharing.
In Messages Menu > Preferences > Video section what speed setting is set in the Bandwidth Limit drop down ?
It should be no lower that 200kbps if you want to Video chat or Screen Share (the Min for both is 128kbps)
Even if it shows a speeds higher than this change it to something like 500kbps then close/Quit Messages and then restart it. (i.e change the setting anyway to give a bot of a jolt)
10:18 PM Thursday; May 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have iph 5 but the camera has crashed suddenly and cant hear any sounds on the phone
I have iph 5 but the camera has crashed suddenly and cant hear any sounds on the phone
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you
Thank you for your valuable advice. I've solved the problem right now.
Thanks
2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
I have Photoshop CS 5.5 version, but I've just changed my camera and
I can't open my raw files. I need for my new camera Photoshop CC and Camera
Raw 8.7 version. How can I do to update the old version? Thank you
created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7302535#7302535> -
When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening
Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.2.1.1
Application Timestamp: 4d756476
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.3
Fault Module Timestamp: 4d4d9a00
Exception Code: c0000005
Exception Offset: 0034a672
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160 -
How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?
Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?
Maybe you are looking for
-
After downloading itunes 10 it won't open!
I have been trying to resolve this issue for a few months now and cannot seem to fix it, when i try to download itunes it shows that everything is fine and itunes has been downloaded successfully but when i try to start the application nothing happen
-
How do I use AppleScript to Change the Creation Date to the Current Date?
I sorted my downloads folder by creation date and found that the items were sorted seemingly randomly. On closer inspection, I saw that the creation dates were not the same as the dates that I downloaded the items, so I figures that Snow Leopard was
-
Problem while building jsp/servlet in j2me
Hi friends, I'm building Servlet in j2me.When i run this Servlet on web browser the Servlet running fine.But while in application when i used conn = (HttpConnection)Connector.open( url ); where url = "http://localhost:8080/servlets-examples/hits" It
-
Hi all, I'm having problems starting up Pro 6. It runs into an error (to submit to Apple). It seems that it crashes during or after the plugin check. I have tried to run Logic via a new user and it runs perfectly. This could mean a preference problem
-
Hi, I have a problem in my N95. When I open my music library, there is an artist entry that is empty. The song, which should normally be there, is under an "Untitled" folder. Now, when I try to delete the empty artist entry, it comes up with a messag