Have a Sony Bravia KDL60EX720 that wont power up, no light , have tried different outlets...Any idea
Have tried Different outlets but still no power. Any ideas<
Hello there, kdburl! I am sorry to hear that your Sony TV won't turn on! Have you tried performing the steps in this link below? https://us.en.kb.sony.com/app/answers/detail/a_id/38329/c/65,66/p/61659,62766,63294/ The troubleshooting steps listed in the link should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. Sorry for any inconvenience!
Similar Messages
-
For some inexplicable reason, Safari 5.1 will not open in Windows 7. It appears in task manager briefly and then disappears. No windows open; I have tried everything. Any ideas??
I fixed the issue. It was related to the DEP settings on my windows machine.
-
My iphone is not charging and i have tried different outlets adapters and cords and it is dead so no one say anything about going to settings or anything like that
Take it to an Apple Store genius bar
-
Hi. I have a problem with my mac book pro snow leaopard,I cant get it to get the artwok for my new C/D,I have tried all I can.
How-ever my I- mac found the artwork no problem, all the spec is this same on both machines.any ideas out there?
Its no big deal I know,its just a mystery why.The battery is fully charged so it is not the problem.
What happens when you use the MagSafe? -
Sony bravia KDL-48W590B wont power on
No responce to power, cord/19.5 volt power supply tested..t.v. only 8 mounths old..called teck support and can berly understand them (different country... please help
Hi Taruis79,
Welcome to Sony Community!
You can follow these procedure. If your TV will not turn on or does not have any power.
Make sure the AC power cord is connected securely to a working wall outlet.
Press the POWER button on the TV.
Press the POWER button on the remote control that was supplied with the TV.
NOTE: If the TV turns on and off using the POWER button on the TV but does not respond to the POWER button on the remote control, troubleshoot the remote control.
Unplug the TV power cord from the electrical outlet for 30 seconds.
Plug the power cord into a known working electrical wall outlet.
Attempt to turn on the TV.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required.
Thanks,
Jerome
If my post answers your question, please mark it as "Accept as Solution" -
I have an install disc stuck in a g5 that wont power up is there anyway to get it out
I have an install disc stuck in a g5 that wont power up is there anyway to get it out
Hello,
If all else fails,like holding mouse buttn down on bootup...
Other than that, you can slide the door of the optical downwards with your fingers, then use a straightened out paper clip to push into that tiny hole to eject the tray. -
How do you transfer data from a good G5 hardrive that wont power up?
I have an old G5 that wont power up but the hardrive is still good, I want to pull the HD and transfer the data to my new Mac Book Pro, any suggestions? thanks so much
Reb,
You can do your file transfers with the swiss army knife that aqua suggested. That was my first thought.
http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/?APC=XLR8YourMac09
However, if you purchase an external firewire drive, it will give you far more options. You can install a clean system on it using your Mac Book Pro and try to revive your G5. The G5 will boot from an external firewire drive but not the USB adapter/swiss knife.
You can also open the external case, swap out drives and use it as a firewire version of the swiss army knife to transfer files from the G5.
If you get the G5 is going, you could look at Disk Utilities and see if something on the G5 drive is the reason the computer is not starting.
Just some options to consider.
Jim~ -
I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ -
Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...
Grumpy Gator,
Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
Hope this helps. -
My iPad Air when charging cuts in and out, also the charger is extremely hot. Have tried different chargers with and power outlets, all with the same outcome.
The troubling thing to me is the fact that the charger gets extremely hot - according to what you are saying. The charger can get warm and can get fairly warm when the iPad is charging, but it should never get extremely hot. Make an appointment at an Apple Store, take the iPad, the cable and the charger with you and ask them to look at everything for you.
-
I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?
I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.
-
I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.
Set up as facing pages with a larger inside margin.
-
I have a full page photo in a iPhoto book that is splitting into two sections across 2 pages. Any ideas what the problem might be?
Have you selected the spread layout?
If so change it to a single page full page layout
LN -
I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.
Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that. Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.
-
Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?
I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?
Maybe you are looking for
-
How can I sync a playlist from my itunes account to my friends iPad?
When I connect the ipad to my macbook and open itunes there is not a 'sync music' option as usual, only 'Itunes match is on' and the option to sync voice memos?
-
Date data from Crystal Report one day less than Date from Source
Hi, I am creating a Crystal Report 4.0 for Enterprise Users (Client Version only) based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Crystal Reports,
-
How to hide one column in PIVOT(in Union )
Hi experts I have one problem regarding my Pivot report. I have to calculate MTD an YTD in my single report so i have calculated MTD in one criteria (UNION) YTD in second criteria. In my MTD i have to show 4 column: A B C D and in YTD I have to show
-
Has anyone gotten the new 640x480 videos to work?
Has anyone gotten the new videos to transfer to their ipod? Mine keeps saying that they are not supported by ipod. Also does anyone know what bitrate for video is now supported?
-
Photoshop cs4 and multiple monitors
When i save a document as a jpg on one monitor and then drag the photoshop window to the other monitor and save it the same way, they turn out differently! Whats going on?