Have updated InDesign CC, but now get an error message for Font Manager.InDesignPlugin

I have updated recently updated InDesign CC, but now I get this error when I try to open a document that was working fine yesterday:
Cannot load Adobe InDesign CC because it requires version 9.1 or later of the Font Manager.InDesignPlugin plug-in. Please contact vendor for compatible version of Font Manager.InDesignPlugin.
Where can I find this plugin (for Mac)?

Thanks Peter, just saw your reply now, but that night I did uninstall and reinstall ID; in the morning did the ole shutdown - rest - command+option+p+r on start up as an added precaution and then it worked fine for the rest of the week.
Also, I got a new computer last week. The changeover to the new mac seeeeeemed to be fine...
However, I think Adobe suffers from Monday-itis as today I can't open any programmes as I get the attached message box when I try to  sign in to Creative Cloud. Will make this it's own post too.

Similar Messages

  • Trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    Try the manual method specified here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • I have an IPOD classic with 80MB of music. reying to reinstall library from a new PC. it goes through the synch process but I get an error message for most of the content.  Library plays on the pc under Itunes fine?

    I have an IPOD classic with 80MB of music. I am trying to reinstall library from a new PC. it goes through the synch process but I get an error message for most of the content.  Library plays on the pc under Itunes fine?

    Disable the Convert higher bit rate songs to 128 kbps AAC option from under the iPod's Summary tab in iTunes and see if that helps.
    B-rock

  • HT5858 I need to update my apps but I get an error message that it is pointed to the us store vs Canadian store?  Where do I switch app stores.

    I need to update my apps but I get an error message that I am pointed to us store vs Canadian store.  Where do I change app stores?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located; re-select country/region even if it is correct
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • I have just reinstalled Itunes but  i get an error message @cant read itunes library .jtl  Was created by newer version of Itunes

    I have just reinstalled Itunes but  i get an error message 'cant read itunes library .jtl  Was created by newer version of Itunes'
    How do I fix?

    Unless you deliberately downgraded iTunes at the same time this may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
    tt2

  • Software Update Doesn't Work - Now getting software error message

    The software update still doesn't work.  Now when I get the red triangle with the red exclamation point, when I start to remove the back of the phone I get an orange error message that takes up most of the screen.  At the end of the message it says that there is a problem with the ota__.zip package.  Then it gives me the option of rebooting.
    Does anyone know if/when this software problem will be fixed?
    I would definitely not recommend this phone to anyone.  Phone doesn't work, VZ and HTC can't fix the problem. 
    Thanks.

    It is not my problem!!  First of all, I don't ask for the download to start.  It starts on its own, several times a day.  Second, I use WiFi connection because 4G rarely works.
    Third, I did everything Verizon said to do - I went to a local VZ Wireless store where they did a factory reset.  Then they tried the download - it took 3 hours to download and then the update failed.
    Up until today the phone itself (not me) tried to download and apply the update several times per day.  Each time it fails.  The screen displays a black background with a red triangle with a red exclamation point through it.  Up until today I had to remove the back of the phone and then remove and replace the battery to unlock the phone.
    Today when I started to remove the back of the phone the orange error messages appeared as stated in my original post.
    Verizon also recommended talking to HTC which I did and they had no idea what the problem was.
    Verizon also told me that if the update still failed after the factory reset they would send me a new phone.  I said okay but they sent me a used phone instead (factory refurbished).  They said they should not have told me they would send me a new phone.  Then they said that when I return the phone if it gets lost then Verizon will bill me for the phone and I will have to get the money back from Fedex.  Outrageous!  Verizon didn't send me the phone they said they would and then said I would be billed for the cost of the phone if Fedex lost it.  I have never experienced such poor "customer service"  (or should I say customer unservice).
    I prefer Android and Microsoft Windows to anything Apple but I am seriously considering getting an iphone since this phone doesn't work and isn't supported.

  • I have just "gone" digital with a new Nikon D610, but I get an error message (model unknown) when I try to open a file in PS.  What do I need to do?

    I've done an "update" with Adobe, but still get the error message about my model not being supported.  What do you advise?  Thanks.

    Since support for your camera was added in Camera Raw 8.3, there is no version of Camera Raw for your version of Photoshop that will enable you to open the NEF files from your camera. One alternative would be for you to download the DNG converter version 8.5, and use it to create digital negative copies of your NEF files. They will still have the raw image data in them, but they will be in a format that your version of Camera Raw can work with. Another alternative would be for you to add Lightroom to your workflow. You would still be able to send copies of your NEF files to Photoshop when needed. The other alternative would be for you to join the creative cloud an upgrade to Photoshop CC. There is a package that includes Photoshop and Lightroom for the monthly subscription price of $9.99 in the US. I think Photoshop CS6 can still be purchased separately as a standalone product. And there is a version of Camera Raw for that version of Photoshop that will enable you to open your NEF files.
    While you are trying to decide which way you want to go, you might consider using the DNG converter as an interim solution. It's free, you'll still have your original NEF files, and you'll be able to start working with your raw image data today. Here is the link:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5

  • Trying to update iTunes but keep getting the error messag "the url could not be opened" when it's always worked fine in the past. What does this mean?

    Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!

    Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
    tt2

  • After updating to itunes 10 i now get an error message saying there is a problem with the windows insaller package - I have tried all the suggestions but nothing works for me - have I lost all my itunes forever?

    After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found."  I have uninstalled and reinstalled iTunes multiple times.  Am running Windows XP Svc Pack 3.  help

    I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found.  Reinstalling the application may fix this problem."  I have uninstalled and reinstalled iTunes several times with no success.  I am running Windows XP Svc Pack 3.  Help please.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99753)

  • I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup.

    I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup the iPod. I have authorized my computer.  Still no luck.

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

  • I have updated to maverick but am getting constant safari page reloads, tab freezes, etc, any ideas, or any idea when apple aim to fix this please?

    i have updated to maverick but am getting constant safari page reloads, tab freezes, etc, any ideas, or any idea when apple aim to fix this please?

    Try troubleshooting Safari extensions and third party plugins.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    hello!
    i have a similiar problem:
    i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
    its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
    or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
    thanks, florian

  • When i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

    when i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

    Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • Mail sometimes takes a very, very long time to open messages

    This is similar to some other messages I've seen here, but I perhaps have some new observations. Often, but not always, Mail takes up to 120 seconds to open each message in my Inbox. This happens with messages that have already been downloaded from t

  • I work from home and connect to my work via VPN.

    Recently, I was being locked out several times a day.  It was discoved that my Mac-Mini is trying to connect to my work network, but I have never set anything up for this to happen.  How can I stop this?  I set up on my Mac Mini a app called PocketCl

  • Create Film Roll - greyed out

    I wish to create some Film Rolls, to better organize my photos.... As the title indicates the option under File 'Create Film Roll' is greyed out. As extra info: I have checked that all ticks are set under Library, no entry in the search box bottom ri

  • Output device not automatically determined in VF02

    Hello gurus, My default output device is not coming automatically when I add an output type in VF02. This is an issue because output type has requirement 62 set in output procedure, therefore it will not be added until invoice is release to accountin

  • Adding dateTime value in yyMMddHHmmss

    Hi All, I am using MSSQL Data Base. I have a requirement to store the date value in the form of yyMMddHHmmss. I am able to get the date value in the above format. But when I try to insert the value into the DB its throwing an Exception. The code to i