Output device not automatically determined in VF02

Hello gurus,
My default output device is not coming automatically when I add an output type in VF02. This is an issue because output type has requirement 62 set in output procedure, therefore it will not be added until invoice is release to accounting. Futhermore, we have implemented Argentina eletronic invoice, which won't allow to change the invoice once it has been released to accounting. Quite a contradiction. So I'm hoping the output type will be added by condition technique while releasing to accounting, yet i believe since the output device is not being automatically determined in the background, it won't do.
Any ideas?
Thank you very much.
JP

Hello guys,
I had checked all your suggestions before posting this thread, but still the issue remains:
- VV31 condition records are fine but I cannot set a single output device since it will be used for many output devices.
- Analysis was carried in VF02 and the condition is being picked up but since requirement 62 is set in the output procedure, which forces the billing document to be first released to accounting, the condition is being removed:
- Printer is set in the user profile options, but does not come as default in VF02
Thank you all.
Kind regards,
JP

Similar Messages

Output type not automatically determined (no output device specified)

the output device is already specified for this output
we dont want to manually add the output on all the invoices where the output was not automatically determined before... what should we do?
is there a way not to manually add them?
thanks in advance
Pablito

Hi
You really dont need to add the output in all these documents.
You have to maintain the masterdata for output records in VV31.
Now just open all the invoice documents one by one in Change mode through transaction code VF02 and just save it
Whenever a document is opened in change mode, the output gets automatically triggered. Hence the output type will be automatically populated in the output screen. Once you save the document, the output gets successfully executed, and you will get the desired document
Reward if this helps you

Output Type not automatically determined at invoice creation

Hi Friends,
I am facing a problem that while i am generating the invoice for a particular billing document type, the output type is not automatically being determined. Instead, I have to go into the invoice in change mode (VF02) Header>Output and assign the output type to it and select the local printer and save in order to print the invoice.
I am generating the invoice for this Invoice Type/Output type for the first time.
Please suggest the possible causes.
Regards,
Pankaj

Hello Pankaj,
Suppose you are using output type RD00 for invoice print out. You have maintained the condition record for RD00 in transaction code VV31. The most important thing here is the assignment of the printer.
Suppose for output type RD00 you are maintaining the condition record for key combination - Sales Organization + Distribution Channel + Division.
At the header level you will see the Sales Organization & Distribution Channel & at the item level you will see the Division.
Sales Organization = BP01
Distribution Channel = 01
Division.............Name..........Funct.........Partner............Medium......Disp. Time.....Langu
01............... Std Division..........BP............--......................1......................3................---
Select the line item & click on Communication. Here assign the output type which you will use for the print out. Now Save the condition record.
After doing this try running one sales cycle - sales order - delivery - invoice. Save the invoice & now check in the change mode (transaction code VF02) the system will determine the output type RD00 automatically.
Note:
1. In the create mode the system will not display the output type RD00, after you have saved the invoice the output type will be determined automatically.
2. Also check if there is any requirement assigned for the key combination in the access sequence (IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Billing Documents - Maintain Access Sequences)
With best regards,
Allabaqsh.
(Idhasoft Ltd.)

EDI Output ZB00 not getting determined in case of Split Deliveries.

Hello All,
A very Good Morning to you,
Hope you are doing good,
We have come across one critical Issue where the EDI Output ZB00 Dispatch Advice is not getting determined in case of few Split Deliveries in PROD.
Issue : On a daily basis our Client is generating Split Delivery Process used for some specific customers only.
These specific customers we are maintaining in ZPARAMS Table. The Flow of the Process is as below.
Sales Order -->Parent Delivery ZLF--> Split Delivery ZLS--> Invoice ZF2.
First the Sales Order ZOR is created through VA01 or EDI.
This ZOR is processed via ZVL10A to create parent delivery ZLF.
Once the parent delivery ZLF is created an Outbound IDoc SHPOD gets triggered which goes to the Distribution Centre Technicolor UK to check the confirmed qty and materials that needs to be delivered.
Once the Quantity is verified and confirmed from DC an Inbound IDoc SHCON interface SAP.
This Inbound SHPCON IDoc checks the entry in ZPARAMS for that customer. If the entry is found it creates one more Split Delivery ZLS doing picking and post Goods Issue in one step. This is the point where the ZB00 output is determined automatically in ZLS Delivery and processed successfully immediately.
After that the Normal Invoice ZF2 is created.
We have given the process flow details in the attachment along with Functional Modules used by the EDI Team.
Now the Issue we are currently facing on a daily basis in PRD Out of the Total Count of ZLS Deliveries in few of ZLS Deliveries ZB00 Output is not getting determined at all which is causing a huge revenue loss. For remaining ZLS Deliveries it is getting determined correctly and processed.For Split Delivery we have only 2 Customers.
We would like to know why this is happening in case of only few ZLS Deliveries.
As a work around we have just write one program for these disputed deliveries where it will go in VL02N of these deliveries and save it without doing any changes. This will make ZB00 determined and processed immediately.
We have even check the scenario in Quality Client no Issues at all. It is getting determined and processed successfully for all the test cases we created.
Please could you help us on this so that we can fix this critical Issue.
Many Thanks,
Farhan.

if QA system works correct
you probably need to find the difference between it and PRD client.
I guess it is a huge job.
but who does if not you?
because you have a lot of custom things included coding
also request abaper.

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

Output device "" not known

Hi Expert,
I try to execute SWU3 for automatic customizing workflow on ECC 6.0.
I have got error Output device "" not known and no background job is executing in my system .
This error I am getting for this activities
Schedule Background Job for Missed Deadlines
Schedule Background Job for Work Items with Errors
Schedule Background Job for Condition Evaluation
Schedule Background Job for Deadline Monitoring
I search in other topic, it mention that basis guy do something bot not clear how to solve it.
Please help me.
Thanks in advance.

Hi Karri,
Thanks for the reply.
Yes I do have authorization for execute SWU3. My user ID have same authorization as sap*.
WF-Batch User Exist, RFC for workflow localXXX also set.
From thread : Error activating SWU3 - output device "" unknown
I see this issue solve by basis, they adding some parameters to start and instance profile.
But I have no idea which parameters.

Output device not defined error while saving the quotation

Hi all,
We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1. Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is displaying an error as 'Output device not defined'. If i remove all the output types while changing the quotation in VA22 from header, it is processing.
I checked with all other output types combination. The error is trigerred only when we have ZJT output type along with ZQTO.
We are not able to recognise the error. Please help out to solve this issue. Its very urgent.
Thanks.

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

Output device not listed.

What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed.

Very well stated. And, sometimes I do forget that there is still such a thing as celluloid. Not to mention all the new "K"s that RED is coming up with (aren't they working on something like 27 or 28k now?) When I look at it from that point of view, what you say makes perfect sense.
But then why does preferences>video preview in After Effects give me the "output device" option of IEEE 1394 at NTSC 720x480? This leads me to believe that I could plug a deck into 1394 and get a video preview. If this is the case, then my way of thinking says it should offer other options for "output device".
When I first set up Premiere Pro CS4, the playback settings did not list the HDMI HDTV as an external monitor option. It wasn't until I fooled around with the system's display settings and turned the HDTV into an extention of the desktop that suddenly Premiere Pro listed it as a possible external monitor. So, my history there (and my goofy sense of logic that makes perfect sense to me) has me wondering if a similar sequence of messing with the display options is suddenly going to make AE see the HDTV as an "output device". I am not interested in realtime playback, merely the closest reference possible as to what my video image looks like in HD on an external monitor. I ask "why do I need a separate video card like my old Matrox card, when standard graphics cards these days can handle HD & even have HDMI out?"
Admittedly, I know next to nothing about the complexity & inner workings of software and computer components. Why, I was ready to throw a party just because I successfully installed an additional hard drive in my new computer. I must be like one of my own clients who don't understand why we can't easily separate a voice track from a music track when it's been rendered as one .mp3 file...or why we can't quickly cut a person out of a video layer and make them seamlessly interact with footage of JFK, Zemekis-style.

Output device not detected

My Mac Air is in mute mode with no output device detected and I cannot move it out of that mode in system prefs.

I just realized I posted this in the wrong place. I moved it here. http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/monitor-on-secondary-display-output-device-not/2dd93e8b-4d29-42dd-9a6f-189992074ae8?tm=1430617069126

Output Proposal not automatically proposed

Hi Experts,
I have created a condition record for output type Zquo .
When I do the output determination analysis and click on condition access i see a message < b condition found /b> and System Response says "An output proposal is created".
Even after this The output is not proposed automatically.
what could be the problem.
I appreciate all the help I can get with this .
Tks in advance

Hi,
Assign your Out put type to the billing Type in T.Code :VV31 and then create fresh billing doc.
Regards,
R.Janakiraman

Output type not automatically triggered in billing

Dear all,
Output type is not automatically triggered while creating billing,every billing need to maintain it
manually but output type is already maintained for all customers in VV31.
How to solve this issue or any configuration setting need to be done ?
Jeyakanthan

Hi
Kindly check the belwo path
Sales and Distribution
     Basic Functions
         Output Control
          Maintain Output Determination for Billing Documents
            Maintain Output Determination Procedure
in the billing out put procedure check against the billing out oput condition type any tick is maintained in the manual only
Regards
Damu

Output device not changing in Spool

Dear Fellows,
I am having problem in the printing of purchase contracts. Users want to keep the output proposed in contract creation in pending status and keep on using it through ME9K by trial print out.
Original output is proposed with output medium of printout OK. Now if I change it to output medium fax in ME9K and do a trial fax it does not work. SP01 shows the original printer as output device and not the fax machine.
I am not sure where the problem is. Please help why output device is not changing when the output medium is changed ?
Tkx
IMJ

Dear,
When in NACE tcode, you must be selected Application EV, then select output types button. Then select the output type for Fax->then branch to detail , go to default value tab: then you''ll find transmission medium.You can select "fax" or "external send".
If you're using external send, u need to maintain the "communication strategy"in
IMG-Application serverbasis servicesmessage controlDetermine Comm.Strategy,then name it and maintain the comm,typethen select the comm.method=fax.
Regards,
w1n

My devices not automatically switching between Airport Extreme and Airport Express in extended network

I have setup an extended network in my home using an Airport Extreme and an Airport Express. The Extreme is connected directly to the FiOS modem and the Express is being used as the extender. The nework is setup fine, but my devices (MBA, iPhone, iPad) are not switching base stations when the signal becomes poor on the one it's connected to. For example, I am upstairs with my MBA and a great signal as I am connected to the Express. When I move downstairs to where the Extreme is setup, the Wi-Fi connection becomes poor even though I am litterally sitting next to the Extreme. To force it to connect to the Extreme, I need to shutoff the Wi-Fi on the MBA and turn back on. At this point, the MBA will connect to the Extreme with a excellent signal.
Any thoughts on why the MBA is not automatically switching?
Thanks for the help!
Brian

The first troubleshooting step for any kind of network "issue" is a complete power cycle of the network. This gives everything a "fresh start" with new connections.
Power off the entire network.....all devices....in any order you want
Wait a minute or two
Start the modem/router first, and let it run a full minute
Start the AirPort Extreme next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network again with the MBA and report on your results
Do not worry about the iPhone and iPad....they are pretty much hopeless as far as automatically switching from one access point to another....but the MBA should if it is working correctly.

Default output device not coming

I made one PDF form and attached it in List LG01 in CB85 to print process order through COR2 output device is mentioned as LP01 in list Lg01, but while printing, output device is coming as which is mentioned in user profile.
I want that output device which i mentioned in configuration should come as default during printing through COR2....Pl. help
Edited by: lisa harley on Feb 26, 2010 11:09 AM

Hello,
Please check the below settings at "Printer Specification" for CB85,
If output device = 1 ,then it will select the output device for user profile
if output device = 2 , Output device from configuration, ie CB85
Regards
Pradeep

Sound "output device" not recognized

Out of the blue I get no sound on my computer. I tried all sound preferences and it says that "no output device is found." I even tried headphones, but nothing works. The mute button is checked, but I can't uncheck anything. Everything's gray -- can't be accessed/clicked on.
Help! Thanks.

Welcome to Discussions - have you tried rebooting Also, take a look at the suggestions [here|http://docs.info.apple.com/article.html?artnum=300832] and see if anything helps. If you hear the start-up chime but no other sound, the problem might be what another poster, First Magus has suggested:
Your digital out has been turned on. You will also notice a red light in the hole when this happens. Use a plastic toothpick to reach into the hole and around the 3 o'clock position try flipping the switch. An alternate method that has worked for some people is to plug and unplug the earphones a few times. This sometimes resets the switch.
Please post back with results,

Output device not automatically determined in VF02

Similar Messages

Maybe you are looking for