Having multiple cursors active
Hi!I am new to the cursors stuff. I have become familiar with how to activate cursors in the front panel. I have three waveforms in a single graph and the cursor detects the peak of each waveform. I need to do this programmatically. I did go through a few posted answers on using cursor list and active cursor but i am not able to figure out how to do it. I am finding the peak of each waveform and i want the cursor to move to that Y position. I tried all combinations and it works for juct one cursor and not the three. Can someone in detail tell me the steps to do it.
Thanks!
Like this?
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000C43A0100&HTHREAD=000080580&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
2006 Ultimate LabVIEW G-eek.
Similar Messages
-
Does anyone have experience with having multiple editors work on the same project from different computers?
As much as I hate to admit it, YOU ARE RIGHT!
I will tread lightly on this project.
Thanks for the sanity check,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Dedicated scheduling of a planned order having a fixed activity
Hi Gurus,
We're using PP/DS Optimizer with Total Delay Costs objective function, following a Backwards Scheduling strategy in order to Reduce Premature Scheduling. Order activities are then scheduled as close as possible from the requirement dates. However we would wish to apply a forward scheduling strategy to the orders having a fixed activity, but starting from the existing order planned start date instead from the system date, i.e:
Requirement X due on 18.01.2012
Output firmed planned order Y with 3 activities (A1, A2, A3), A2 beeing fixed
Optimization result with a Backward scheduling strategy:
A1 09.11.2011
A2 18.11.2011
A3 17.01.2012
Optimization result when Backward scheduling setting is unchecked
A1 NOW
A2 18.11.2011
A3 17.01.2012
The business requirement we d'like to achieve
A1 09.11.2011
A2 18.11.2011
A3 19.12.2011
It is not foreseen to fix A1 to bypass the problem, above example is only a basic example whereas there're multiple activities in between A1 & A2 in our real material PDS. Is there any way (even with another optimization run, or using in combination a Production Planning Run...) to achieve such a scheduling strategy?
BR,
Pascal.Hi,
To add further and to more precise, the issue is:
In CM01[or in any capacity evaluation tcode], In a particular maonths load[Period] the opeartion from different month is showing up.
For example: if Period[month] 06 is veiwed of a Workcenter load, a line[load appears], whose earliest date is in 7th month[01.07.2014].
I expected to see, only Workcenters scheduled in 6th month to show up in the load evaluation.
Please look at the screen shot.
Regards,
Avinash -
I have been having multiple issues lately with my iMac
I have been having multiple issues lately with my iMac - starting with insanely slow processing/run speeds.
When I run Activity Monitor, consistently the highest usage of CPU is "ReportCrash" - typically shows up as 80-200% of CPU.
What could this be caused by?
I posted only a portion of the code from Activity Monitor but not sure what exactly is relevant or not. I can certainly post more if it's needed.
Many thanks!
Analysis of sampling ReportCrash (pid 332) every 1 millisecond
Process: ReportCrash [332]
Path: /System/Library/CoreServices/ReportCrash
Load Address: 0x10e14a000
Identifier: ReportCrash
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2013-04-23 18:17:29.753 -0400
OS Version: Mac OS X 10.8.3 (12D78)
Report Version: 7
Call graph:
2492 Thread_6876 DispatchQueue_1: com.apple.main-thread (serial)
+ 2492 start (in libdyld.dylib) + 1 [0x7fff847cd7e1]
+ 2492 ??? (in ReportCrash) load address 0x10e14a000 + 0xfb9c [0x10e159b9c]
+ 2492 -[NSConditionLock lockWhenCondition:beforeDate:] (in Foundation) + 235 [0x7fff815f1e39]
+ 2492 -[NSCondition waitUntilDate:] (in Foundation) + 357 [0x7fff815f1fe3]
+ 2492 _pthread_cond_wait (in libsystem_c.dylib) + 927 [0x7fff86326023]
+ 2492 __psynch_cvwait (in libsystem_kernel.dylib) + 10 [0x7fff8b52f0fa]
2491 Thread_6877 DispatchQueue_2: com.apple.libdispatch-manager (serial)
+ 2491 _dispatch_mgr_thread (in libdispatch.dylib) + 54 [0x7fff887179ee]
+ 2481 _dispatch_mgr_invoke (in libdispatch.dylib) + 883 [0x7fff88717dea]
+ ! 2481 kevent (in libsystem_kernel.dylib) + 10 [0x7fff8b52fd16]
+ 8 _dispatch_mgr_invoke (in libdispatch.dylib) + 134 [0x7fff88717afd]
+ ! 4 _dispatch_mgr_thread2 (in libdispatch.dylib) + 43 [0x7fff887180a8]
+ ! : 3 _dispatch_queue_drain (in libdispatch.dylib) + 180 [0x7fff88716448]
+ ! : | 2 _dispatch_queue_invoke (in libdispatch.dylib) + 72 [0x7fff88716305]
+ ! : | + 1 _dispatch_source_invoke (in libdispatch.dylib) + 58 [0x7fff88717022]
+ ! : | + ! 1 _dispatch_kevent_register (in libdispatch.dylib) + 280 [0x7fff887173f4]
+ ! : | + ! 1 _dispatch_source_kevent_resume (in libdispatch.dylib) + 63 [0x7fff88717513]
+ ! : | + ! 1 _dispatch_kevent_resume (in libdispatch.dylib) + 92 [0x7fff88717588]
+ ! : | + ! 1 _dispatch_kevent_machport_resume (in libdispatch.dylib) + 96 [0x7fff887175ec]
+ ! : | + ! 1 mach_port_move_member (in libsystem_kernel.dylib) + 31 [0x7fff8b52e539]
+ ! : | + ! 1 _kernelrpc_mach_port_move_member_trap (in libsystem_kernel.dylib) + 10 [0x7fff8b52d626]
+ ! : | + 1 _dispatch_source_invoke (in libdispatch.dylib) + 257 [0x7fff887170e9]
+ ! : | + 1 _dispatch_kevent_unregister (in libdispatch.dylib) + 286 [0x7fff887189ad]
+ ! : | + 1 free (in libsystem_c.dylib) + 199 [0x7fff8633a8f8]
+ ! : | + 1 szone_free_definite_size (in libsystem_c.dylib) + 211 [0x7fff8634012c]
+ ! : | + 1 _spin_lock$VARIANT$mp (in libsystem_c.dylib) + 13 [0x7fff8630ff9d]
+ ! : | 1 _dispatch_queue_push_list_slow2 (in libdispatch.dylib) + 33 [0x7fff88715e10]
+ ! : | 1 _dispatch_wakeup (in libdispatch.dylib) + 132 [0x7fff88715ecd]
+ ! : | 1 _dispatch_queue_wakeup_global_slow (in libdispatch.dylib) + 59 [0x7fff88716073]
+ ! : | 1 pthread_workqueue_addthreads_np (in libsystem_c.dylib) + 47 [0x7fff86324016]
+ ! : | 1 __workq_kernreturn (in libsystem_kernel.dylib) + 10 [0x7fff8b52f6d6]
+ ! : 1 _dispatch_queue_drain (in libdispatch.dylib) + 48 [0x7fff887163c4]
+ ! 3 _dispatch_mgr_thread2 (in libdispatch.dylib) + 71 [0x7fff887180c4]
+ ! : 3 _dispatch_source_drain_kevent (in libdispatch.dylib) + 172 [0x7fff887186d2]
+ ! : 3 _dispatch_source_merge_kevent (in libdispatch.dylib) + 226 [0x7fff88718858]
+ ! : 3 _dispatch_wakeup (in libdispatch.dylib) + 132 [0x7fff88715ecd]
+ ! : 3 _dispatch_queue_push_list_slow2 (in libdispatch.dylib) + 33 [0x7fff88715e10]
+ ! : 3 _dispatch_wakeup (in libdispatch.dylib) + 132 [0x7fff88715ecd]
+ ! : 3 _dispatch_queue_wakeup_global_slow (in libdispatch.dylib) + 59 [0x7fff88716073]
+ ! : 3 pthread_workqueue_addthreads_np (in libsystem_c.dylib) + 47 [0x7fff86324016]
+ ! : 3 __workq_kernreturn (in libsystem_kernel.dylib) + 10 [0x7fff8b52f6d6]
+ ! 1 _dispatch_mgr_thread2 (in libdispatch.dylib) + 61 [0x7fff887180ba]
+ ! 1 _dispatch_cache_cleanup (in libdispatch.dylib) + 30 [0x7fff88716695]
+ ! 1 szone_free (in libsystem_c.dylib) + 473 [0x7fff8633c91d]
+ ! 1 _spin_lock$VARIANT$mp (in libsystem_c.dylib) + 13 [0x7fff8630ff9d]
+ 2 _dispatch_mgr_invoke (in libdispatch.dylib) + 858,885 [0x7fff88717dd1,0x7fff88717dec]It would help to know more about your iMac.
What year, screen size, CPU speed and amount of RAM installed?
How full is your Mac's hard drive?
How many applications do you run simultaneously in the background while working in another application?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?
Have you downloaded and installed anything recently that might have caused the erratic behaviour of your iMac? -
How to handle stored procedure response having multiple queries
Hi Friends,
While working in JDBC to RFC scenario,I faced an issue that my stored procedure is having multiple SQL queries in it. First Select and then update and again some select options.So,how to handle the response of the stored procedure. I read that while using sender JDBC
" db.processDBSQLStatement=<SQL-Select-Statement>
Either specify a valid SQL SELECT statement to select the data to be sent from the specified database, or specify an SQL EXECUTE statement to execute a stored procedure that contains exactly one SELECT statement "
So, please suggest me is there any other way to catch the output of the stored procedure.Because, if select statement is working fine but if any other quires fails then data inconsistencies can happen.Kindly help me out.
Thanks and Regards,
NutanHi nutan,
>>Already exception is handled in SP.But,issue is that select will never fail so, sender adapter will get the resultset from select and continue process.But if later any other query fails in SP adpter wont be getting any response.
Along with exception you need to handle the case when some other query fails. A SP is like a procedure which will do a certain list of activities before providing the output. So during this activity if some query fail then you can send back the response with a message!!!! And in XI handle this error (by routing it to some error receiver etc)
>>I need to try something like creating a temporary table and inserting the resultset of slect statement in that. and perform all other operations and after successful completion of all the queries.Again i want to get all the values from the temporary table. So,whether I can write such query in the sender communication channel.Please suggest me for this.
Approach looks ok, but think of the delay for JDBC sender adapter. IT will invoke your SP and will wait for it to fill a table and do all the processing. I guess this may become a issue for you.
Check on the frequency of this interface and message size before taking this design approach
Regards
Suraj -
[Help] statement.executeQuery(query) opens MULTIPLE cursors
Hey everyone,
I'm having a real hard time finding anything about this on the net so I've turned here. When we call:
resultSet = statement.executeQuery(query)
from a servlet for some reason that one executeQuery opens anywhere from 9-12 cursors in our oracle DB. All the executeQuery documentation I could find just said it should open 1 cursor for that particular ResultSet. query is a fairly simple SQL statement, it searches multiple tables but that doesn't explain why it should open so many cursors.
On a side note the resultSet and statement are global to the method and are closed in the finally block, no SQLExceptions are thrown further adding to my confusion.
If anyone has seen something like this where executing 1 query opens multiple cursors please let me know any information you might have.
Thanks in advance
-DaveHi Dave
I had a similar problem using the Oracle 8i, but my query was a more complicated than yours and opened a lot of cursors.
The answer is to close every ResultSet and the Statement:
while (xxResult.next()){ ... }
xxResult.close();
xxResult.getStatement().close();
This worked for me,
Good luck,
Daniel. -
One column having multiple values with comma separator.
Hey Guys,
In my db, one culmn having multiple values with comma separator. like column_name = 'value1,value2,value3'. Now I want to compare this column to another column and fetch in Cursor.
and each value having corresponding email_id, By fetching cursor, I need to populate email_ids.
Thanks in advance!!
-LakshmanPlease compare and fetch cursor and populate result with out extract data into temp table. Give me the query!You have not provided DDL for table so I don't know table or column name to write any SQL.
You have not provided DML for test data to run SQL against. -
MM: PO Not Picking up PR Having Multiple Line Items
Hi All,
When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code.
CASE1: Created PR 760001340 with single line item and also could able to create PO.
Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
Plz. Advise a solution.
Thanks in Advance.....
Regards
SudheerHI SHWN,
Thanks for prompt response.
ERROR Message: When referencing a requisition, please also enter a requisition item no.
Regards
Sudheer -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
Having multiple problems with script - NTFS Permissions and AD Groups
Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though. -
Hi! I am so stumped with having multiple Apple ID accounts. I did this not knowing what I was doing and now I can not update my iPhoto app because it tells me to log into the account that I used to purchase it. I thought I was trying to do this but I can't get anywhere.
Please help!
FloraHi Florafromco,
You can view your iTunes Store account and request assistance by following the instructions below:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/ht2727
I hope this information helps ....
The following article will provide a little more information regarding using multiple Apple ID's:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I hope this information helps ....
Have a great day!
Have a great day!
- Judy -
Effect of Multiple cursors in Function Module Extractors
Hi,
I am trying to use multiple cursors in an FM extractor, like this:
OPEN CURSOR WITH HOLD c1 FOR <select query 1>.
OPEN CURSOR WITH HOLD c2 FOR <select query 2>.
FETCH NEXT CURSOR c1
INTO CORRESPONDING FIELDS
OF TABLE i_equi.
FETCH NEXT CURSOR c2
APPENDING CORRESPONDING FIELDS
OF TABLE i_equi.
" Further processing of equipments
" obtained in i_equi
I am also checking SY-SUBRC, after each Fetch statement. If both cursors happen to be empty, the extractor exits by raising no_more_data, like other extractors.
It is possible to do so, since I just tried it. The question is, are there any disadvantages of this kind of approach in terms of memory or speed?
Edited by: Suhas Karnik on Sep 29, 2008 12:06 PMhI kiran,
The simple way is to create a data element & domain with value range where u provide set of fixed values or provide a check table to it.
Use that data element in a table <ztable>.
Code:
Parameters:
p_burks like <ztable>-dataelement.
Call Function <function_name>
exporting
p_burks = p_burks, -
Having multiple Goods Suppliers in Partner profiles of Vendor - Uses
Hi All,
We use multiple goods suppliers in partner profiles of vendor so that if the supplier has manufacturing facilitiy at various places for same material and he supplies us from one of them as lsited in the PO.
Above is one of th use of having multiple goods suppliers in partner profiles of vendor.
Other than above are there any specific benefits , can some one help me in listing out .
Regards,
Vengal Rao.do you need to follow up an individual order with a GS or many many orders at one time?
I am not aware of any standard PO report by partner roles.
In general the GS partner is just for information purposes, except you are doing business in European Union, then the GS partner is taken instead of the vendor to determine the country of dispatch for the Intrastat reporting. -
How to add (multiple) cursors programmatically in an XY graph?
how to add (multiple) cursors programmatically in an XY graph?
I am building an XY graph. then I would like to add cursors at certain locations (positioned on x axis) I determine through a program.
How can I add cursors programatically?
Thank you.Initialize a cluster array (CrsrList type) with as many cursors as you think you would ever need. Setup your cursors dynamically, then delete the unused cursors (array elements) and then update your CursorList property.
Message Edited by vt92 on 03-20-2009 04:04 PM
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
cursors.PNG 5 KB -
Flat file having multiple header lines , how to separate the same and pushit into my intrnal table
Hi Guys,
I got an issue , My flat file having multiple header lines
TPS27RPR MOME THRIFT (SAVING) PLAN SYSTEM Page 2
09:54 05 JAN 2014 List of Contributors w/Company Contributions Phase DAY Unit TRE
Company No: xxxxxxxx - xxxxxxxxxxxxx.
Employee/ Employee/
Employee Full Name/ Company Company Allocation
Number ID Number PS PN End Date Contribution Profit Total Balance Percentage
some lines of data and again
TPS27RPR MOME THRIFT (SAVING) PLAN SYSTEM Page 2
09:54 05 JAN 2014 List of Contributors w/Company Contributions Phase DAY Unit TRE
Company No: xxxxxxxx - xxxxxxxxxxxxx.
Employee/ Employee/
Employee Full Name/ Company Company Allocation
Number ID Number PS PN End Date Contribution Profit Total Balance Percentage
in this case how could I separate the header lines from the flat file and update the details to my internal table.
kindly help me on this issue.
Thanks and regards,
M.S.Amirtharajvijay.Hi Amirthraj,
If the flat file is static (if the content within it is same for all) then use the offset concept. First get the contents of the flat file into an internal table and later find the field that has to be in final internal table within the line, calculate the offset for the line and get the value into an workarea. Finally modify/append the work area into an internal table. Also wait for other experts answers for any other hassle free way to achieve the requirement.
With Regards,
Giriesh M
Maybe you are looking for
-
I need to know if anyone has coded the pythagoras theorem using areas of squares to prove the theorem. I have got a triangle on screen with my angles and side lengths displayed in a jtable. I need to extend it to display the sides as squares. such th
-
I am looking for an app where I can edit word documents as well as sign them. I am a physical therapist whose looking to cut down on paper work. Someone types my evaluations and then we print them out for me to edit by hand and then they go back an
-
Trying to set application item value through javascript
Hi, I am not sure what I am doing wrong here can someone possibly shed some light? I have the following in my HTML Header of my login page <script language="JavaScript1.1" type="text/javascript"> function setAppItem(val){ var req = new htmldb_Get(n
-
Photoshop CS6 freezes upon opening
Running CS6 64-bit on a Windows 7 machine. Everything is updated, and it was working fine yesterday and every day before for the 2 months we've been running it on this machine. New today: Open Photoshop and it opens the window but you can't click any
-
3.0EA1 is started very slowly.
SQL Developers started very slowly. I install SQL Developer 3 (no JDK included) and I am using it. Now both SQL Developers – 2.1.1 and 3 are starting slowly. I tried to change JRE by Java Console with no result. Any other application has no such prob