Having problems with networking, seems to be DHCP

I'm having issues with networking on a newly installed Arch Linux instance.
Relevanct lspci data
25:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
26:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
Network manager output
NetworkManager[2201]: <info> NetworkManager (version 0.9.8.2) is starting...
NetworkManager[2201]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
NetworkManager[2201]: <info> WEXT support is enabled
NetworkManager[2201]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
NetworkManager[2201]: keyfile: parsing MagnificentBumrag ...
NetworkManager[2201]: keyfile: read connection 'MagnificentBumrag'
NetworkManager[2201]: <info> monitoring kernel firmware directory '/lib/firmware'.
NetworkManager[2201]: <info> rfkill3: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:25:00.0/ieee80211/phy0/rfkill3) (driver ath9k)
NetworkManager[2201]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/platform/hp-wmi/rfkill/rfkill1) (platform driver hp-wmi)
NetworkManager[2201]: <info> WiFi hardware radio set enabled
NetworkManager[2201]: <info> WiFi enabled by radio killswitch; enabled by state file
NetworkManager[2201]: <info> WWAN enabled by radio killswitch; enabled by state file
NetworkManager[2201]: <info> WiMAX enabled by radio killswitch; enabled by state file
NetworkManager[2201]: <info> Networking is enabled by state file
NetworkManager[2201]: <info> (wlo1): using nl80211 for WiFi device control
NetworkManager[2201]: <info> (wlo1): driver supports Access Point (AP) mode
NetworkManager[2201]: <info> (wlo1): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
NetworkManager[2201]: <info> (wlo1): exported as /org/freedesktop/NetworkManager/Devices/0
NetworkManager[2201]: <info> (wlo1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[2201]: <info> (wlo1): bringing up device.
NetworkManager[2201]: <info> (wlo1): preparing device.
NetworkManager[2201]: <info> (wlo1): deactivating device (reason 'managed') [2]
NetworkManager[2201]: <warn> failed to allocate link cache: (-10) Operation not supported
NetworkManager[2201]: <info> (enp38s0): carrier is OFF
NetworkManager[2201]: <info> (enp38s0): new Ethernet device (driver: 'r8169' ifindex: 2)
NetworkManager[2201]: <info> (enp38s0): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[2201]: <info> (enp38s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[2201]: <info> (enp38s0): bringing up device.
NetworkManager[2201]: <info> (enp38s0): preparing device.
NetworkManager[2201]: <info> (enp38s0): deactivating device (reason 'managed') [2]
NetworkManager[2201]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.5/0000:26:00.0/net/enp38s0
NetworkManager[2201]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
NetworkManager[2201]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
NetworkManager[2201]: <info> (wlo1) supports 4 scan SSIDs
NetworkManager[2201]: <info> (wlo1): supplicant interface state: starting -> ready
NetworkManager[2201]: <info> (wlo1): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
NetworkManager[2201]: <warn> Trying to remove a non-existant call id.
NetworkManager[2201]: <info> (wlo1): supplicant interface state: ready -> disconnected
NetworkManager[2201]: <info> (wlo1) supports 4 scan SSIDs
NetworkManager[2201]: <info> (wlo1): supplicant interface state: disconnected -> inactive
NetworkManager[2201]: <info> (enp38s0): carrier now ON (device state 20)
NetworkManager[2201]: <info> (enp38s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
NetworkManager[2201]: <info> Auto-activating connection 'Wired connection 1'.
NetworkManager[2201]: <info> Activation (enp38s0) starting connection 'Wired connection 1'
NetworkManager[2201]: <info> (enp38s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[2201]: <info> Activation (enp38s0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[2201]: <info> Activation (enp38s0) Stage 1 of 5 (Device Prepare) started...
NetworkManager[2201]: <info> Activation (enp38s0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[2201]: <info> Activation (enp38s0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[2201]: <info> Activation (enp38s0) Stage 2 of 5 (Device Configure) starting...
NetworkManager[2201]: <info> (enp38s0): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[2201]: <info> Activation (enp38s0) Stage 2 of 5 (Device Configure) successful.
NetworkManager[2201]: <info> Activation (enp38s0) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager[2201]: <info> Activation (enp38s0) Stage 2 of 5 (Device Configure) complete.
NetworkManager[2201]: <info> Activation (enp38s0) Stage 3 of 5 (IP Configure Start) started...
NetworkManager[2201]: <info> (enp38s0): device state change: config -> ip-config (reason 'none') [50 70 0]
NetworkManager[2201]: <info> Activation (enp38s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
dhcpcd[2262]: sending commands to master dhcpcd process
NetworkManager[2201]: <info> dhcpcd started with pid 2262
NetworkManager[2201]: <info> Activation (enp38s0) Beginning IP6 addrconf.
NetworkManager[2201]: <info> Activation (enp38s0) Stage 3 of 5 (IP Configure Start) complete.
NetworkManager[2201]: <info> (enp38s0): DHCPv4 client pid 2262 exited with status 0
NetworkManager[2201]: <info> Activation (enp38s0) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
NetworkManager[2201]: <info> Activation (enp38s0) Stage 4 of 5 (IPv4 Configure Timeout) started...
NetworkManager[2201]: <info> Activation (enp38s0) Stage 4 of 5 (IPv4 Configure Timeout) complete.
NetworkManager[2201]: <info> Activation (enp38s0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
NetworkManager[2201]: <info> Activation (enp38s0) Beginning DHCPv6 transaction (timeout in 45 seconds)
NetworkManager[2201]: <warn> the dhcpcd backend does not support IPv6.
NetworkManager[2201]: <info> Activation (wlo1) starting connection 'MagnificentBumrag'
NetworkManager[2201]: <info> (wlo1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[2201]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[2201]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) started...
NetworkManager[2201]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[2201]: <info> Activation (wlo1) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[2201]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) starting...
NetworkManager[2201]: <info> (wlo1): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[2201]: <info> Activation (wlo1/wireless): connection 'MagnificentBumrag' requires no security. No secrets needed.
NetworkManager[2201]: <info> Config: added 'ssid' value 'MagnificentBumrag'
NetworkManager[2201]: <info> Config: added 'scan_ssid' value '1'
NetworkManager[2201]: <info> Config: added 'key_mgmt' value 'NONE'
NetworkManager[2201]: <info> Activation (wlo1) Stage 2 of 5 (Device Configure) complete.
NetworkManager[2201]: <info> Config: set interface ap_scan to 1
NetworkManager[2201]: <info> (wlo1): supplicant interface state: inactive -> scanning
NetworkManager[2201]: <info> (wlo1): supplicant interface state: scanning -> authenticating
NetworkManager[2201]: <info> (wlo1): supplicant interface state: authenticating -> associating
NetworkManager[2201]: <info> (wlo1): supplicant interface state: associating -> completed
NetworkManager[2201]: <info> Activation (wlo1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'MagnificentBumrag'.
NetworkManager[2201]: <info> Activation (wlo1) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager[2201]: <info> Activation (wlo1) Stage 3 of 5 (IP Configure Start) started...
NetworkManager[2201]: <info> (wlo1): device state change: config -> ip-config (reason 'none') [50 70 0]
NetworkManager[2201]: <info> Activation (wlo1) Beginning DHCPv4 transaction (timeout in 45 seconds)
dhcpcd[2361]: sending commands to master dhcpcd process
NetworkManager[2201]: <info> dhcpcd started with pid 2361
NetworkManager[2201]: <info> Activation (wlo1) Stage 3 of 5 (IP Configure Start) complete.
NetworkManager[2201]: <info> (wlo1): DHCPv4 client pid 2361 exited with status 0
NetworkManager[2201]: <info> Activation (wlo1) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
NetworkManager[2201]: <info> Activation (wlo1) Stage 4 of 5 (IPv4 Configure Timeout) started...
NetworkManager[2201]: <info> (wlo1): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
NetworkManager[2201]: <warn> Activation (wlo1) failed for connection 'MagnificentBumrag'
NetworkManager[2201]: <info> Activation (wlo1) Stage 4 of 5 (IPv4 Configure Timeout) complete.
NetworkManager[2201]: <info> (wlo1): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[2201]: <info> (wlo1): deactivating device (reason 'none') [0]
NetworkManager[2201]: <warn> Connection disconnected (reason -3)
NetworkManager[2201]: <info> (wlo1): supplicant interface state: completed -> disconnected
NetworkManager[2201]: <warn> Connection disconnected (reason -3)
I have run modprobe with the driver (ath9k) and it still won't work.
When connected to Wired, the internet works but it keeps saying 'Setting network address' without moving forward. When trying to connect to wireless it says 'Configuring interface' but then goes back to not connected.
Also, if I put Link-Local as the ipv4 method, it will connect successfully but then disconnect again. The (reasion 'ip-config-unavailable') pops up over and over again.
Also, I've tried wpa_supplicant, netctl, and wicd.

Security questions
Read this note for information on how to reset the security questions http://support.apple.com/kb/HT5312
This user tip may also help you Security Questions

Similar Messages

Having Problem With Network

Hi,
I'm having problem with a carrier network (Maxis),which i always get 'no service',whether i on the phone and after i off the phone.I try to reset the network,but it seems the same.Please help me solve my problems.

did u have this problem before of after the last update.

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.us there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PCM anymore.

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.is there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PC anymore.i reset my pc and save my iTunes to a hard drive but can't access it.Need help please

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

I was having problems with my iPhone 5s. Was able to get another 5s. In the process of setting it up, but it is taking forever ... and it seems to be frozen at one particular place.

I was having problems with my iPhone 5s (couldn't receive iMessages or emails). Cell company tried "fixing it" but to no avail. They ordered me a repacement 5s. Trying to set up, but it is taking forever. Seems to be stuck in one particular spot. It's at the stage with a black screen, white apple icon and a bar underneath. The bar is is just a fraction complete, and it has been stuck in this spot for almost an hour. Tried to restart it but it went to the same spot and froze again.

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized and it moves around causing the device to toggle and flash like its coming on or shorting. Anyone having problems?

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized, trys to connect using the back (curved) edge of the magnetized bracket. When I try to attach it, it moves around causing the device to toggle in a way that looks like the camera flash. Anyone having problems? Help.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I re

I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)

In your email settings on the phone check to make sure it is set to receive emails on cellular network. It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on.

Hi I am having problems with my itunes app. It seems to want to open but then closes straight away. All other apps are working fine

Hi I am having problems with my itunes app. It seems to want to open but then it wont

restart
http://support.apple.com/kb/ht1430

I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network"

I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network". I have "ticked" the "remember password" box. I´m connecting to a wireless network on an regular Speedtouch router at home. I´m new to Mackintosh.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

I am having problems with my droid incredible 2 loading texts and so I thought maybe I had too many saved, I tried to delete some of them and it wont seem to delete either?

I am having problems with my droid incredible 2 loading texts and so I thought maybe I had too many saved, I tried to delete some of them and it wont seem to delete either?

Did you pull the battery?

Is anyone else having problems with syncing photos on ipad - seems to be fragmenting the events

Is anyone else having problems with syncing photos on ipad - seems to be fragmenting the events

Here's the problems I'm having with iPad 2 and iOS 5.1:
Okay ... so, because I had less than a 1 Gig left (as reported by iTunes) on my 64Gig iPad, and the majority of the space was being used by "Photos" ... I decided to not keep my PC photos directory in sync with my iPad (Windows 7). So, in iTunes, I unchecked the option to sync computer photos to the iPad. I got the standard popup warning message that my iPad would not contain those albums after the next sync. I clicked OK and proceeded to sync expecting to have lots of space freed up.
But weird things happened after syncing.
(1) I still have all my photos on my iPad .... nothing disappeared at all. (And performed multiple syncs to try to force the change ... still nothing has been removed from my iPad.)
(2) Somehow, I gained 20 Gigs of free space, as reported by both iTunes and my iPad as well.
Anyone know what's going on here?
I do have iMovie and another movie making app, Avid. Both of these contain projects that refer to photos in albums that were supposed to be removed after the sync ... but I can't imagine that would keep them there. Anyone have any ideas?
I also installed the iPad app, iPhoto. I noticed that it build a directory listing and continuously want to update that listing from time to time.
Would any of these things cause the iTunes photo sync changes to be ignored? And, how did I get free space to report back with an additional 19Gig or so, when there's no change at all.
Unsure what's going on ...

Indesign CS6 on MACs with OS 10.8 are having problems with links

Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. Miller

Thanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar?

Windows 8.1 having problems with pinter selection using Elements 13.

I am running Windows 8.1 with Elements 13 and am having problems with PRINT. If I select a printer from the PRINTER menu, Elements recognizes the change of selection, allows me to modify the printer's specific setting and, then, when I PRINT seems to not recognize the selected printer and print of whatever was set as the original printer. Then, I delete the "original" printer in Windows 8.1 and attempt to print again with the same general result except I receive a Printer Not Found error from Windows.
How do I modify the "original" printer setting (seems to be associated with the file)? Note the "original" printer is not the default printer.

Hatstead,
Thank you.
Yes, all of the print drivers are up to date (re-verified last evening).
Yes, I can print and select the printer as normal for all of the standard applications I use (Visio, PowerPoint, Word, Excel, Outlook, direct print from file (Explorer)).
I shortened the printer names from the standard Microsoft convention (based on some of the BOG comments). There was no change. In fact after the test sequence noted in #5, I re-implemented the "name shortening" yet again (shorter yet). I launched Elements and ran into the same messages noted in #5 (obviously, the "stored" printer did not exist). Yet after I went through the printer selection process (again as in #5) and, after a lag time, Elements redirected the print job what was the "stored" printer which was renamed....I do not know how Elements associated the deleted "Stored" printer with its old name with the newly named printer since no other application could (I checked).
I have closed and restarted the PC numerous times.
I have deleted all of the printers except the one I wanted to use for the specific print job. In this case, Elements came back with a message it could not access the "stored" printer. I then selected the correct printer, Elements acted like it was allowing to set up the selected printer with the specifics of the print job, and, then when I went to print, Elements again tried to redirect the print job to the "stored" printer (even though it did not exist).
The target printer is a "local" printer (USB connected). The apparent "Stored" printer is a network printer. So, I deleted the PC which has the "Stored" printer from the network (actually not only deleted it from the devices on my PC but literally shut the PC down and disconnected it from the network (two different test)) to no avail (still got the test results in #5).
Yes, I have attempted to print from the Editor (my normal mode) and from Organizer.
I have copied, open a new file and, then, pasted the image I wanted to print to no avail.
Is the a "stored" printer associated with the file or with Elements? If so, how to I modify (or dis-associate)?
Again, thank you.

Having problem with iMessage

Hi,
I seem to be having an ongoing problem with my iMessage! First started last week when everybody was having problems with iMessage, however mine is doing it again tonight! My iMessage has been fine all day but stopped working this evening and I've tried restarting phone and iPad but not worked. I've turned iMessage off and now it won't let me activate it, says my apple ID is incorrect - which I've used it else where and its fine. It's not just my phone - same problem on iPad! Any suggestions?? Thanks

This is because the storm. At the same time one of our corporate network providers went down that's based on the East Coast.
Again the outage is known to have been caused by storm and internet intermittent issues on the East Coast.

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Having problems with networking, seems to be DHCP

Similar Messages

Maybe you are looking for