Hdv editing setup

By mistake a posthouse owner bought a AJA interface with Break Out box and a HDV deck (HVR-M15U) which has only firewire control, no RSS-42 control. Now the Aja cannot be connected to deck then how will we capture HDV etc....? He has a QUAD machine and SATA hard drives.
What is the system paths for HDV editing?
thanks for your replies
really in need of your help.

Do you have a Kona Break Out Box and no card?
HDV is not a good format to edit natively because it has such a convoluted codec in general. I haven't had to work with it much, but from what I understand, there is A LOT of rendering involved and the bitrate is unusually high.
What most recommend is converting it to DVCPROHD. If you have a Kona card and a SDI deck, you can bring it in as DVCPROHD on the fly. Otherwise, you can capture it as HDV, then use Media Manager to re-compress the files to DVCPROHD. Edit as DVCPROHD and then output at whatever your delivery is.

Similar Messages

Video Flicker & Creation of SD DVD (16:9) from a HDV edit...

Hi Everyone,
We have just completed a project on HDV.
Shot on HDV using Sony FX1E
HDV Edit using FCP HD
Video Card is Declink HD Extreme.
Problem 1:
Flicker while we render video:
When we render the timeline, the rendered output some times has a flicker that appears. It happens to everything, video, background animation done using motion anything you name. Then if we re-render the same, it goes off next time itself or sometime later. Not quite sure when and why ? We have to check to ensure no flickering is there before we step into the next stage.
The only problem that i could think of is. We have only 1 harddisk in the system. So the OS is in the same drive in which the project is also getting executed.
Problem 2:
Creation of SD DVD (16:9) after finishing HDV edit.
Compressor, the **** product is a royal waste or is that we do not know how to use it. or should we be using something else to make a SD DVD from a HDV edit.
We completed the project by taking a Uncompressed movie output and taking it into another Matrox sytem and created a SD DVD using Adobe Encore DVD. So the job got over, but what is the way to do the same in FCP & DVD Studio PRO.
Making a HD DVD is perfect, we tried that and it worked well.
We look forward to the comments from all you experts.
Thanks in advance.
S.Venkatesh
Power MAC G5 Mac OS X (10.4) Decklink HD Extreme - Video Card

One of the interesting and clever things about OSX is that data is not necessarily written to disk when you think it is - it first goes into a buffer and the buffer is written to disk at times of the OS's choosing. This allows the OS to handle multiple tasks etc. 'at the same time' - it stores things up and then milliseconds or perhaps seconds later writes them to disk. Remember that this includes all processes - and when OSX is running there might easily be literally hundreds of separate little OS-level programs running, all needing to do this or that with files on disk, not just the programmes you think you have running, like FCP or Safari.
The net result of this is that you have no control over when the disk is needed by the OS - and although this isn't a problem normally if you're using Safari or Word or something, when you are handling streaming media like video, it can be a very big problem. If you are playing a piece of video (which must maintain a constant data rate) and the system absolutely HAS to do something to or from disk, your video playback can take a hit, skipping a few frames. If this happened on a long playout to client it would be uncomfortable, but if it happened on your delivery master it could be horrendous.
If you keep your media on a separate disk, the problem disappears, as OSX can do whatever it needs without interrupting the flow of video off the other drive.
So don't so it, it's just waiting to bite you in the a55.

Is there any 3rd party plugin that turn on native HDV editing feature?

Hello,
I love iMovie, but I'd really like to see native HDV editing feature. I guess Apple will never do this, so maybe there is some 3rd party plugin for iMovie that will allow to edit HDV without recompression?

HDV is mp2-encoded material on miniDV cassette.. the 'nature' of mpeg2 doesn't allow a frame-precise editing (only GOP precision, as used in mpeg editors as Streamclip of ProjectX); if you do any editing (adding disolve, titles, effect) you have to encode/'recompress' .. - the 'AppleIntermediate Codec' iMovie uses to make such imports editable is a lossless codec.. so, what should add a 'native HDV' editing...?

Seeking advice on moving up to HDV editing

I appreciate folks on this forum who have assisted me in the past when I’ve had questions about iMovie, editing, burning DVDs etc. Karsten, Lennart, Bengt and others from around the world have been very kind and helpful. I am now seeking advice from anyone regarding “moving up” to the HDV world of video editing.
I recently "retired" my 2003 iMac G4 800 MHz flat screen and replaced it with an iMac 2.8 GHz Intel core 2 duo with a 320 GB hardrive and 4 GB of upgraded RAM. I have a 250 GB external drive as well. I also replaced my old Sony TRV-30 digital camcorder (a great old workhorse which is still going strong after 8 years) with a Canon Vixia HV40 that has high definition recording capability (uses mini DV tape).
I had been using iMovie HD 06 to edit my video projects along with iDVD and Toast 6 to burn them to DVD. I would like to start shooting HDV video with the new Canon, edit and burn the projects to Blu Ray high definition discs. MCE Technologies (among others, I believe) offer both internal and external Blu Ray burners. I don’t believe that the internal Blu Ray burner would work in my new iMac, but I may be wrong on that. (Does anyone know the answer?)
I believe that the MCE external Blu Ray burner would work with my equipment if attached to one of the Firewire ports or possibly through one of the USB 2 ports. (there is both a 400 and 800 Firewire port on this iMac model.) I was planning to acquire Final Cut Express as the editing program with Toast 10 Pro (plus the Blu Ray plug in) to burn the edited projects.
Will this work? Is there anything I should know before I plunge “headlong” into HDV editing? Any advice would be most welcome. Thanks in advance.
Message was edited by: scooper

scooper wrote:
.. iMac 2.8 GHz Intel core 2 duo with a 320 GB hardrive and 4 GB of upgraded RAM. I have a 250 GB external drive .. Canon Vixia HV40 .. external Blu Ray burner .. Final Cut Express .. Toast 10 Pro (plus the Blu Ray plug in)
Will this work?
I'm jealous.. wow! MY set-up..
HDV is supported by IMHD6.. just to mention that. so, HDV-editing is same as SD..
iMHD6 Export 'FullQuality' creates a file, which is HiDef too, for your Toast/BR workflow ..
HDV creates on import (IMHD6/FCE) huuuuuge files, 40-60GBs/h .. 250 extHDD = 6h, full..
actual price for extHDD with 1TB <100€ ..
keep in mind: internal harddrive has to offer any time 10-20GBs free..
not every BR-standalone-player accepts homebrewn disks..don't be disappointed...
Toast and iDVD can burn DVDs (=which offer SD only) from HiDef projects.. no need to 'convert'.. both apps downsize automatically...
FCE has a (very) steem learning curve.. totally different to iMovie.. no one-click-only, no templates, no ready-mades.. but zillions of options, 101% control.. (simple example: ken burns with zoom-to-zil and rotation and moving out of frame...)
buy a book of FC Mastermind and AppleDiscussions-Level5 supporter *Tom Wolsky* - he's a sensei, in-depth-knowledge, hands-on (=no tech blabla), easy to read and understand.
don't start with a project, start with 'tests for the trashbin'..

Native HDV editing

I'd like to know. Do you plan to include this option to iMovie in future (iLife 07 maybe)?
iMovie captures HDV movies and convert them to AIC. I really hate this. Why do you choose this way? I had problems with capturing, with quality, with HDD space.
If I want to get HDV video (not DVD), my movie will be recompressed twice - HDV >> AIC >> HDV. Some of my movies looks like DV after this.
It's really bad. I've always used Mac because it is quick, high quality, stable thing. But now... I never think about I can get back to PC. I don't like PC, but I have to edit my movies on PC right (I use Ulead VideoStudio).
Please fix it. Make native HDV editing option.

Alexey,
I think you're getting quite mixed up about what you see on your computer, or HDTV screen, and the actual quality of HDV..
1 - HDV is very high resolution: it has 4x the resolution of normal DV (Digital Video)
2 - To fit all that extra data (4x standard definition) onto normal DV tapes, the hi-resolution video is not recorded as individual frames of video: a single hi-def frame is recorded, then - as Mike has tried to explain - the next 14 "virtual frames" are simply chunks of data which describe the differences between the original frame, and the subsequent frames. Then, after those 14 "virtual" frames, another full frame is recorded: this process, or picture format, is known as "Long Group-Of-Pictures" and the "complete-frame-and-virtual-ones" method of 'compressing' all that data into a small space is known as MPEG-2.
3 - Because there are 14 "virtual" (actually, non-existent) frames after the initial full frame, this material can't be frame-accurately edited unless the "virtual frames" are rebuilt into actual frames. Apple does this automatically, using the 'Apple Intermediate Codec' used in iMovie: this doesn't compress anything ..but de-compresses, or expands, the original material, and recreates the actual view which was shot by the camera; creating those extra frames from the data contained in the "virtual" frame info. So translating the HDV into AIC doesn't "spoil" anything; it simply rebuilds real frames from the "blueprints" contained in the MPEG-2 recording.
4 - When you see, either on a computer monitor, or on an attached "..1080 LCD TV.." the replay of your 'de-compressed' movie as a .mov within iMovie, you're looking at a downgraded editing version of the actual footage ..just like movie editors working with a rough 'edit' or 'work' print of a 35mm film on their Moviola see a lower grade movie than finally makes it into theatres: they see a print with lots of scratches, inaccurate colour ..just a "rough-and-ready" version. [..Though I have to say that my HDV movies look pretty good on my little Hi-Def monitor in iMovie..]
5 - It's only when you Export back to a tape, in HDV format, your edited movie (..by reconnecting the camcorder to your Mac..) that the full quality is rebuilt back into the same Long-GOP MPEG-2 format in which it was originally shot. Then connect the camcorder to your "..1080 LCD TV.." via component or HDMI connections, and then you should see your movie exactly as sharp as it originally was.
In other words, the appearance you see while editing your movie in iMovie, or any standard-def .mov created from that "work print", may fall short of the actual HDV version which you'll get when you Export your movie back to HDV tape and then view it.
Does that help..?

RAM...KIT or DIMM for HDV Editing?

I need to add some more RAM to my Power Mac G5 Quad (pre-Intel), should I get KIT or DIMM (I don't know the difference), what works best for HDV Editing in FCP?
Also, any brand or vendor suggestions?
Many thanks. : )

Crucial.com. Other than that, I don't know, because I always buy direct from a distributor or the manufacturer at reseller pricing.
BTW, when I referred to 'matched DIMMs', I was referring to DIMMs with consecutive serial numbers, as Kingston used to do it. Don't know if they still do that, but 'matched' means, or used to mean, more than just the same size. FWIW.

HDV edit system setup

hi
i work for a large college in essex, uk, as a video production lecturer and was wndering if someone would help me out with a few questions?
we are currently running 18 final cut studio 2 suites on G5's with 4GB of RAM and split hard drives of 170GB and 500GB looking after the system and the captured footage.
what we plan to do is upgrade these entire systems next year hardware wise and go up to final cut studio 3.
does anyone have any advice on what the minimum hardware spec is we should be getting to go with final cut studio 3?
also, we want to have one of the suites (x2 systems) as a HDV room. i was thinking HDV deck, HDV monitors/screens and blu ray internal burners to burn straight from final cut 3.
can anyone with any experience give me any insight into what i'll be needing for a HDV setup? what kind of monitors should i get? or maybe i should just get commercial screens? should i also have a very basic non HD screen to check the worst case scenario? internal or external blu ray burners? do i need some sort of black magic card to play the HDV in and out?
any help would be much appreciated on this.
stephen

split hard drives of 170GB and 500GB looking after the system and the captured footage.
By split, do you mean partitioned?
You need dedicated drives for your media. Keeping it on the same physical drive will cause bottlenecks -the drive has enough to do running Mac OS X and the applications. Partitioning will make performance even worse.

Using and LCD TV as a monitor for HDV editing

I'm editing in FCP studio 2 and shooting with the new Sony HVR-S270u cameras. I'm trying to figure out the best way to use my LCD TV as a monitor for HD. I know FCP will not playback through my camera in HDV but print to tape with it. I looked into the Blackmagic Design Intensity Pro with HDMI. The problem is the camera doesn't have HDMI it SDI outputs so I'm capturing through firewire. I've been told that the Blackmagic card requires you to capture with it in order to playback with it. I know there is Matrox MXO but are there other options out there.
Can I use the LCD TV as a second monitor and do playback as Cinema Desktop Preview to second monitor? I've also seen a DVI - HDMI cable. Will that work? Any help would be great!
Thanks,
Mike

What format is the media in when you capture it?
Whatever you choose to capture it. You can capture it as HDV via firewire, or ProRes via firewire. Or you can use this card and choose one of the options it gives you...such as ProRes, DVCPRO HD, uncompressed HD...whatever you want, and your hardware can support.
I'm assuming it's no longer HDV.
Only if you don't capture it as HDV. You can still do that and then output via this card to some other format. Or you can capture as HDV, render to ProRes (in the sequence settings under RENDER CONTROL).
Is it uncompressed HD?
If you choose that.
Is there an Easy Setup for this?
Yup.
What codec does it use?
Whatever it lists in the Easy Setups...the ones I listed above.
They also state that you can use it for DV. I'm guessing that means if you have DV material and a device that outputs HDMI you have uncompressed SD?
First off, HDMI is an HD signal, not SD. BUT, you can use the card to output your DV timeline to your HDTV. You cannot output to an SD deck, as no SD decks have HDMI.
If you can import HDV via HDMI and you bypass the HDV codec and get full 1920 (as they say on their website)
Yup..you can capture as ProRes or Uncompressed, and get full 1080. BUT, this doesn't increase the resolution of your footage. It just means that it will render to a better codec with more color space...better manipulation of the image that HDV.
then I'm also guessing that you cannot go back to HDV.
Not via firewire. But if the deck had Component inputs, or HDMI...maybe.
Shane

HDV Editing workflow

About to start cutting a short shot in HDV on the Sony Z1 at 1080i. Will be capturing with a rented M10U over one weekend. Originally I was thinking of using the HDV native codec and Easy Setup and experiment with that workflow. But I have heard so many horror stories about i- and p-frame issues and dirty looking fades/dissolves that I would like to get more info regarding the use of other codecs before proceeding with HDV native.
For instance, has anyone tried HDV native but ended up going back to the Apple Intermediate Codec for better workflow? What are the requirements and pitfalls of working in DVCPro HD beyond drive space - what kind of conversion issues are involved to get to cutting with a DVCPHD Sequence?
Please bear in mind I do not have Decklink, the new Matrox box, HDVxDV or any of the more affordable software/hardware facilitators to do this very modestly budgeted project. All suggestions appreciated. Thanks.
17" 1 Gig Powerbook Mac OS X (10.4.6) FCP Studio Universal

Larry Jordan wrote an interesting summary of the state of HDV recently, you can read it here: http://larryjordan.biz/articles/ljhdvlearn.html
Larry is quite damning of the format and suggests that you must use a hardware card and transcode to DVCProHD or other format, and not edit in HDV, however you should read through the comments posted at the end of the article, particularly those made by Graeme Natress, who makes a very good case for editing natively.

Who can help - several problems with HDV editing in Premier Elem. 8

For several years I have edited DV video with Ad. Prem. Elem. 3.0 without serious problems. Now I'm also shooting HDV video and have bought and installed Ad. Prem. Elem. 8 (PE8). To try out PE8 I have started up two projects, but only to be met with several very serious problems. Before buying PE8 I tried a 30 days version of Ad. Prem. Pro on the same PC without problems.
My PC (from march 2010) is as follows:
Operating system                   Windows 7 Ultimate 64 bit (PE8 update is also installed)
Processor                              Intel(R) Core(TM) i7-930 4x2.8GHz 4.8 GT/s (Gigabyte GA-EX58A-UD3R)
Ram                                      DDR-3-1333 12GB (Kingston)
Graphic card                         ATI HD 5870 1GB DDR5 PCI-5 (AMD)
Harddisc for opr. system C:   Intel X25-M SSDSA2M080G2GN 80GB
Harddisc for photo 1.5TB D: HDS 1500GB SATAII ST31500341 AS (Seragate)
Harddisc for video 1.5TB E:   HDS 1500GB SATAII ST31500341 AS (Seragate)
Disc drive                             Plextor BD-R PX-B940SA SATA
Disc drive                             Samsung DVDWBD SH-B083L
Software installed                  C: Office pro/Ad. reader/RegistryBooster/Syst.Tweaker/Canon camera and
                                             printer software/Q.TimePlayer/AVG free (anti virus)
                                             D: ACDSee Pro3/Photosh.Lightroom 2.7/Photosh.Elem. 8.0
                                             E: PE8
Video cameras                       Sony HVR-Z5P (HDV 1080i) / Sony DCR-TVR 10E Pal (DV)
PROB. 1: When capturing HDV there is no picture in the Capt. Window and no sound. The window is plain black surrounded with a thin red line, which together with a red dot in the windows upper left corner indicates, that the capture should be taking place. But to the right after the text "Capture:", "Video" and "Audio" with there checkmarks, are only half lighted (not active). Only on the camera screen can I follow, what should be captured. With the mentioned indications, capture sometimes takes place, and sometimes not. This is first to see, when capturing is stopped.Very irritating and time wasting, as many of my clips has a length up to one hour (live music scenes). The Device Control in the Capt. Window is working o.k.. When capturing DV, everything is working all right from both the HDV and the DV camera.
PROB. 2: When capturing, "drop-outs", not existing on the tape, but generated in the capt. process, can occur - probably because some other small process takes place on the PC. F.ex. if one is looking around in PE8's Preferences Menu.
PROB. 3: The worst thing concerning these "drop-outs" + those eventual existing ones from the tape, is, that after a drop-out the picture/sound no longer are synchronized. From the drop-out and to the end of the clip, the sound is 11-12 frames behind the picture.
PROB. 4:   When editing/looking at a film in the Monitor Panel, the picture is not very fluent. It is hacking a bit, which makes it very difficult to adjust the lost synchronization (see prob. 3), which I did by moving just the Sound Bar 11 frames in the Timeline, precise from the spot the drop-out had been before it was cut out.
PROB. 5: When HDV is played back in the Monitor Panel, the sound is not to be heard the last 10-11 sec. of the last captured clip, although the sound signals are easily seen in the Timeline. After a restart of PE8, it is o.k.
PROB. 6: When HDV is played back in the Monitor Panel, it happens, that it suddenly stops unprovoked (none else activity has been done, just looking at the Monitor Panel).
PROB. 7: After having just done a few cuts + adding a bit of text + working with the synchronization (see prob. 4) in the two mentioned HDV projects, I burned a Blue-ray disc (BD-RE) of project I, and after adjusting a bit more on the synchronization, I burned one more, both without problems. Then I tried to burn HDV project II, but now the burning window showed several empty little windows (only Rescan/Copies/Status/Quality had text) - the text in "Status" was: "Invalid disc name". That happens both with and without a disc in the drive. Whit a disc in the drive, I tried to Rescan, but each time only to get a warning window saying:"[..\Src\DVD\MPEGEncoder.cpp-121]". By doing anything with "Quality", the same warning turns up. When "Continue" in the warning window is activated, PE8 goes down. I then tried to burn project I again, but although I succeeded burning 2 disces of that earlier, no success - same problem. And again the same with a new third little HDV project, I had made. If I choose to burn a DVD instead of a Blue-ray disc, everything works well.
PROB. 8: I'm now so frustrated, that I nearly see no other possibility than to give up, and feel depressed over wasted good money + not getting my projects done. But I still have a little hope, that someone out there are able to help me out - and if you try, please don't write in an all too complicated way, as English is not my language (Danish it is). Just to illustrate my difficulties, it took me nearly 8 hours to put this rapport together.
Ulf Olsen, Denmark - mail. [email protected] - tlf. +45 4678 8807 / +45 40 555 888

It's very difficult to answer several questions at once on a forum, Ulf. Is there any chance you could ask just one at a time?
As for your installation -- from your notes, it looks like you may have installed Premiere Elements on your E drive. If this is the case, it will not work. You must install the program on your C drive.
Also, if you can not see video of your capture, it is likely related to an out-of-date video driver. Have you gone to the ATI web site and downloaded the latest driver for your card?
If that doesn't work, you can always capture your HDV footage with HDVSplit, which is available here:
http://strony.aster.pl/paviko/hdvsplit.htm
Also, be sure to go to the Premiere Elements Help menu and select Check for Updates. This will ensure you have the latest patch for the program, which resolves many of the challenges you're experiencing.
Finally, have you ensured that your video project is using the HDV project preset? One of the most important steps you can take in working with this program is to ensure that your project preset matches your source footage.

No HDV Editing After 5.0.2 Update

After I updated I cannot edit in HDV only DV. I don't have the option and therefore Premiere won't let me open up previous High Definition projects that I was working on before. I was also experiencing the bloating problem and one of my projects is about 1.5 GBs. I was curious if we can get the HDV working whether or not I simply try to open the project and when I save it again will it be small again. Thank you for your help.

I, and a number of other folks, had this same issue after the update. I appears that CS5 might lapse back into 'demo mode' for some reason on a number of machines. The only way I was able to get it to work again, was to uninstall, run the Adobe supplied "Clean CS5" script, then reinstall the whole package.
There's another thread here about missing codecs after the update which has a better rundown on the fix.
Here's the link:
http://forums.adobe.com/thread/713371?tstart=0
Good luck.
Chris

Bunch of questions for 2k+ video editing setup. Please help if possible

Hello everyone, I'm in the process of building a desktop (mainly for video editing -- with some graphic design and gaming here and there). I'll be working with Canon 5D III raw footage (Magic Lantern) and typical dslr h.264 for the time being. Eventually I'll be working with 2.5k and possibly 4k. I mainly use Premiere Pro and syncing with AE, though with this new build I will start on DaVinci as well.
This is what I have OR considering thus far:
(Just purchased) CPU: Intel Core i7-4930K 3.4GHz 6-Core Processor
(Just purchased) Motherboard: Asus X79 DELUXE ATX LGA2011 Motherboard
(just purchased) Video Card: EVGA GeForce GTX 780 3GB Video Card
(just purchased) Power Supply: SeaSonic G-750 750W 80+ Gold Certified Semi-Modular ATX Power Supply
(already owned) Storage: Samsung 840 EVO 120GB 2.5" Solid State Disk
(already owned) Storage: Samsung 840 Series 250GB 2.5" Solid State Disk
(considering) CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
(considering) Memory: G.Skill Ares Series 16GB (2 x 8GB) DDR3-1866 Memory
(considering) Storage: Seagate Barracuda 3TB 3.5" 7200 RPM Internal Hard Drive
(considering) Storage: Seagate Barracuda 3TB 3.5" 7200 RPM Internal Hard Drive
(consdering) Storage: Western Digital Caviar Green 3TB 3.5" 5400RPM Internal Hard Drive
(considering) Operating System: Microsoft Windows 7 Ultimate SP1 (OEM) (64-bit)
computer tower -- very undecided
My main concern right now is setting up the hard drives. I've been reading and researching on how other editors are structuring their system, but it seems everyone has slightly different setup. So I'm somewhat confused on a smooth and optimal setup. Is this a good setup:
1) Samsung 840 250gb -- for OS/apps
2) Samsung 840 evo 120gb -- for project files/media cache/scratch disk?
3) 2x Seagate Barracuda 3TB 7200rpm in Raid 0 -- for meda/raw files?
4) WD Caviar 3TB 5400rpm -- for exports/general storage/etc
Is that okay? Should I get another HDD to separate project files, media cache, and/or scratch disk? Is Raid 0 necessary? Most likely I'll be using onboard raid option and I never done raid before. The reason why I'm going with the Barracuda is because there's a deal on them right now.
**note: I have 5 external hard drives for backup and backing up the backups. I'm not too worried about the reliability of Raid 0 if it means I can get quicker performance.
Another question, can anyone recommend a tower that's under $150? I've been looking at a bunch and just can't decide. I live in NYC and my room does not have AC so having a tower with good airflow is a must. Also my roommate has a cat and I would like to have dust filters (though not as important as I can just buy aftermarket, but having a tower that comes with some would be nice)
Sorry for the long post and thank you in advance!

All my parts have arrived and I'm all set to put together, but I have one more question. According to Tweaker's page:
Media cache & Media cache database files, created on importing media into a project. They contain indexed, conformed audio and peak files for waveform display.
Typically small files, but lots of them, so in the end they still occupy lots of disk space.
Preview (rendered) files, created when the time-line is rendered for preview purposes, the red bar turned to green. Read all the time when previewing the time-line.
Project files, including project auto-save files, that are constantly being read and saved as auto-save files and written when saving your edits.
Media files, the original video material ingested from tape or card based cameras. Typically long files, only used for reading, since PR is a non-destructive editor.
Export files, created when the time-line is exported to its final delivery format. These files are typically only written once and often vary in size from several hundred KB to tens of GB.
1(media cache) should be on the fastest volume and 5(exports) can be on the slowest. Now I have 3 SSD -- Samsung 840 Evo 250GB, Samsung 840 256GB, and Samsung 840 Evo 120GB... I plan on using the non Evo 250gb for OS/programs. That leaves the 120gb and 250gb (both Evo) for media cache and preview. My question is, which one of the two (media cache & preview) will pile up space faster? Should I put meda cache on the 250gb and preview on 120gb? Or flip flop them?
Sorry for all the questions.

HDV editing

I want to archive material in HDV for the future but run the same videos on TVs that are not HDV.
So If I edit HDV footage in FCE HD can I export a version of the project that will run in "ordinary" DV (as opposed to HDV) and keep the HDV version for future use?

Hi(Bonjour)!
Simply burn a wide screen iDVD project. (current iDVD versions don't support hd DVD nor Blue Ray burning)
Michel Boissonneault

HDV editing from an external scratch disk?

I use FCE to edit High Def video from my HCR HC1 and at the moment have my scratch disk on my internal hard drive. In the past i stupidly put it on my USB 2.0 external hard drive but quickly found i had problems with dropped frames etc. during playback. Can anyone give me feedback on using an external fire wire hard drive for a scratch disk (with HDV) and playback results/any problems encountered?
Thanks.

Hi Ross, I don't currently use an external scratch disk, only my internal 500Gb disk, but my experience may still have some relevance. My external 250Gb USB is used purely for copying files around via Finder.
I use two HCR-HC3 camcorders to do multi-cam edits. I have found that I get an occasional dropped frame during playback, especially if I am scubbing the timeline too agressively, or have another app in the background.
Good luck with the comments from other folk.

Trouble "Sharing" HDV Edit

Hi Folks,
I am having a few issues, which is undoubtedly user error, so I could use some help.
1) Shot standard def and edited final output to DVD with my Canon XH A1 HDV cam without any issues. Capture worked fine, could control the cam from the computer and see the footage in the capture window
2) Shot HD in 60i, but couldn't see the footage in the capture window. Had to use the LCD on the cam. Capture worked out fine however, as did the edit.
3) Output the edit to .MOV and looks awesome, even with the cam set on "auto". But I tried to save it as an mpeg or AVI, it saved ok, but my computer says it doesn't know how to play a .m2t file. How should I be "Sharing" this to view on my computer (and with which settings), other than using Quicktime?
Thanks in advance for any help?
Stan

Though not freeware, as those two great little players that Paul_LS mentions, Nero Vision will play them fine, as well.
As for the preview of HD material during Capture, neither PE, nor PrPro allows for this. As you note, all is fine with the Capture, but it's a display situation. I would anticipate that this will be added with CS5 or PE8 - but that is only a guess.
Good luck,
Hunt

Hdv editing setup

Similar Messages

Maybe you are looking for