Head count for the 3rd at 3:00am

Even though there are a lot of people that are not on the verizon forums but if you are here, let's get a head count then we can estimate other's that arent on here. Who will be up at 3:00am to pre-order their iphone?
say hello or me!

Sorry friends, but it 3:00 AM for one and all according to their time zone. EST first and then it moves west, but it is 3:00 AM no matter where you live.
Not only that, but Verizon has allocated a specific number of phones for each time zone, and I would guess that zones with huge populations have more phones alloted to them.
I have researched high and low and I do know what I am talking about - no need to stay up until midnight, but there is a need, if you are as desperate as I am, to get up at 2:55 AM your time.

Similar Messages

Message retry count for the message has been exhausted

Hi,
I am using 'Custom Document Over Internet' with HTTPS as transport protocol. I have set the acknowledgement mode to Sync in order to receive the synchronous response. B2B is able to post the HTTP request successfully and in turn it receives a synchronous response and a MDN message. At the initial stage, after posting the request it shows the state as 'WaitForAck' for request message and for response and MDN messages, the state is completed.
After some time when we check the state of request it is changed to 'Error' with the error message as 'Message retry count for the message has been exhausted'. We have not set the retry count and retry interval and so after retrying for 3 times with an interval of 120 minutes it is showing error state as it is not able to correlate the incoming response to the corresspoding request. We have tried the option of setting the Message id of the request in 'replyToMsgID' parameter of response header and tested the flow. But still I am facing te same issue. Please help me to resolve this issue.

Hi Anuj,
The property mentioned by NandaGopal has already been added in tip.properties file. I sent the B2B logs in debug mode and tip.properties file to your mail id. Please have a look into that. The result of opatch lsinventory command is
Result:
Installed Patch List:
=====================
1) Patch 9234704 applied on Fri Jan 15 16:41:12 GMT 2010
[ Bug fixes: 8870866 9143036 ]
[ This patch overlays patches " 8703410 " ]
[ This patch needs patches " 8703410 " as prerequisites ]
2) Patch 8703410 applied on Thu Jan 07 17:56:08 GMT 2010
Unique Patch ID: 11901808
[ Bug fixes: 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022 ]
3) Patch 4601861 applied on Fri Nov 14 04:24:08 GMT 2008
[ Bug fixes: 4601861 ]

Is there a student dis count for the Ipad 3?

Is there a student dis count for the Ipad? as it would be awsome if there is Email if you know the awnser

NO.

What is the PACKAGING (box it comes in) weight and dimensions for the 3rd generation Apple TV?

Hi
What is the PACKAGING (box it comes in) weight and dimensions for the 3rd generation Apple TV?
Thanks
CTV

The clear thing is a stand. The white thing is the dock adapter.
The stand can be seen in use here:
http://www.silvermac.com/wp-content/uploads/2007/10/ipod_touch.jpg

Cannot sign into my pc with icloud just reinstalled for the 3rd time!!! I am doing it all right there is a major problem!

cannot sign into my pc with icloud just reinstalled for the 3rd time!!! I am doing it all right there is a major problem! The wheel keeps spinning!!!!! says problem with server.

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

How to determine count for the number of rows

Appreciate if any of you could think of a way of determining the count for the number of rows in the subquery without having to run another query.
SELECT *FROM
(SELECT rownum, rn, rlp_id, rlp_notes, cad_pid, status, jurisdiction_id, s.state_abbr, rlp_address, rlp_route_id, rlp_route_section, psma_version FROM ipod.relevant_land_parcels r, state s WHERE s.state_pid = r.state_pid(+) AND rlp_route_id = 'SM1' AND status = 'CURRENT')WHERE rn > 200 AND rn < 216
And I want to import this into.net and C# environment.

Something like this,.....????
SQL> select * from emp;
EMPNO ENAME      JOB         MGR HIREDATE          SAL      COMM DEPTNO
7369 SMITH      CLERK      7902 17/12/1980     800,00               20
7499 ALLEN      SALESMAN   7698 20/02/1981    1600,00    300,00     30
7521 WARD       SALESMAN   7698 22/02/1981    1250,00    500,00     30
7566 JONES      MANAGER    7839 02/04/1981    2975,00               20
7654 MARTIN     SALESMAN   7698 28/09/1981    1250,00   1400,00     30
7698 BLAKE      MANAGER    7839 01/05/1981    2850,00               30
7782 CLARK      MANAGER    7839 09/06/1981    2450,00               10
7788 SCOTT      ANALYST    7566 19/04/1987    3000,00               20
7839 KING       PRESIDENT       17/11/1981    5000,00               10
7844 TURNER     SALESMAN   7698 08/09/1981    1500,00      0,00     30
7876 ADAMS      CLERK      7788 23/05/1987    1100,00               20
7900 JAMES      CLERK      7698 03/12/1981     950,00               30
7902 FORD       ANALYST    7566 03/12/1981    3000,00               20
7934 MILLER     CLERK      7782 23/01/1982    1300,00               10
14 rows selected
SQL>
SQL> select max(rw) from
2 (
3 select empno , row_number () over (order by empno) rw from emp
4 where job='CLERK'
5 )
6 /
   MAX(RW)
         4Greetings...
Sim

I purchased numbers for my mac and my iPad. It is asking me to purchase it again (for the 3rd time) for my iPhone. Is that correct?

I purchased numbers for my mac and my iPad. It is asking me to purchase it again (for the 3rd time) for my iPhone.
Is that correct?

You only need to purchase Numbers once for each OS. Have you tried connecting your iPhone to your Mac via iTunes & adding Numbers there?
Eric,
The iOS versions of the iWork apps are "universal' & there is no reason to have to buy the iPhone version first.

How to include header name for the fields in application server

Hiiii Experts,
                      LOOP AT fp_i_wwcmp INTO fp_wa_wwcmp.
      CONCATENATE fp_wa_wwcmp-pernr
                   fp_wa_wwcmp-etype
                   fp_wa_wwcmp-maxbt
                   fp_wa_wwcmp-epayperiod
                   fp_wa_wwcmp-currencyid
                   INTO l_v_data SEPARATED BY l_v_char_tab.
i need to insert header names for etype,maxbt,epayperiod,currencyid which are needed to be transfer to application server.
regards,
kasyap
Edited by: Harish Kasyap on Sep 18, 2009 2:49 PM

hiiiii clemens thanks a lot for ur reply,
                                                           this is not an alv report,the output is directly transfered into application server AL11.
and i have used this statement
CONCATENATE 'ID'
                'EpayType'
                'EpayAmount'
                'EpayPeriod'
                'CurrencyID'
                   INTO l_v_data SEPARATED BY l_v_char_tab.
transfer l_V_data.
is this the rite one
regards,
kasyap

A time counter for the whole project

Can you tell me is there any way to get the overall project time as a time counter in the playback controls? Or viewed somewhere on Captivate?
I need to know at which time a particular slide is appearing in a video. I can only find time duration per slide or one overall time for the project.

If you dont like the TOC, here you can find some other ideas:
http://blog.lilybiri.com/display-time-information

EXTREMELY slow synching and having to reinstall, for the 3rd time!

Recently, I got an update for iTunes. I installed it and it said "Would you like windows to restart now or would you like to manually restart later?" I clicked on that I would manually restart. Well, I had computer problems so I had to hold down the power button and restart. (This is unhealthy and should only be done in an emergency!) When I turned it back on, I got an alert that said "Unable to open iTunes, please uninstall then reinstall." So I did. This is about the 3rd time this has happened. Now my iPod Video (80g) syncs majorly slow. Like when I say majorly I mean about 30min-1hr major. If you could help me in any way, that would be awesome!
+EDIT: Also, when I'm listening to my music it will stop at random parts of the song, any idea why? It has done this ever since it came out of the box!+
Message was edited by: Ashleigh Martini

So, since it syncs really slowly, make sure that it's not a USB issue with the iPod. Make sure it's the only USB device plugged in since the others might be taking power, and then try to get the iPod plugged in directly to the back of the computer to make sure it's plugged into your more powerful ports.
If that doesn't do it, it might be confused with a network drive and following that article helps you change the drive letter.
Also make sure to disable any third party software that might be interfering with it, go through this article if you've got XP or this one if you're using Vista.
Hope I was of some help,
iTunes Helper.

So For The 3rd TIME WHEN I'VE PLEADINGLY ASKED NOT TO UPDATED Why Does FF Update My Browser?

You see, I've asked this same question twice before, because Firefox has once again for the third time updated by browser DESPITE MY PLEADING REQUEST TWICE BEFORE NOT TO DO SO. but now I have a platform to make Firefox's DISHONESY public, putting them to task for specifically defying a very adamant request, NOT TO UPDATE MY BROWSER, CIRCUMSTANCES THAT have consistently, repeatedly occurred throughout all the years I've been with Firefox since 2005.
Why is it that Firefox deliberately continues to defy, ignore the wishes of its most loyal customers inflame me beyond words, when I've repeatedly made it KNOWN QUITE WELL NOT TO HAVE MY BROWSER UPDATED.
BUT NOW AFTER ALL THIS TIME, TOGETHER WITH THE INSIGHT I HAVE ACCRUED AS AN IT INDUSTRY SPECIALIST I do very well know why Firefox CONTINUES THIS PRACTICE WITH ABANDON.
1.They don't like anyone fooling around with the about:config (then why did you ever include it in the first place) the way I do.
2. They don't like anyone making incompatible add-ons extensions COMPATIBLE again the way I do.
3. They don't like anyone tampering with Firefox the way I do.
And all Firefox has to do to nullify all the meticulous hard work I spend changing about:config. configurations to accommodate my own and my company's needs and all the hard work. spending time enabling newly incompatible extensions I need to work as efficiently and effectively as possibleamong other things that I've tweaked, WHICH I EXACTLY WHAT YOU DO FOR THE REASONS I GAVE. YOU DO IT deliberately, spitefully so. And that is the definitive reason for YOUR total defiance in disregarding a customer's request. Additionally, YOU, fIREFOX feel that since YOU wrote the code, and own the code, YOU can insist USERS follow the Firefox protocols exactly as YOU demand.
Another example of YOUR dictatorial approach to browsing the web is that that YOU feel no one should dare take a gander at content that is not up to the standards of WHAT YOU BELIEVE IS purity AND ANY OTHER CONTENT CORRUPTING THE MORALS OF OUR YOUTH.
In one of the instances in which my browser was updated despite my adamant position against it, SOMEONE IN YOUR ORGANIZATION deleted several STRICTLY STRAIGHT adult sites from my bookmarks.
SO NOW, NOT ONLY DO you HAVE AN INTRUSIVE BIG BROTHER ATTITUDE THAT NO ONE DARE DEVIATE FROM THE OFFICIAL FIREFOX BROWSING PROTOCOLS BUT NOW YOU'VE IMPLEMENTED A CENSORING CAMPAIGN ON WHAT YOU CAN READ, LOOK AT OR SIMPLY BOOKMARK.
BUT IT GETS WORSE, MUCH WORSE.THE LAST TWO TIMES YOU UPDATED MY BROWSER AGAINST MY WISHES, YOU GAVE ME THE LAMEST MOST ASININE, INSULTING, MORONIC REASON WHY YOU UPDATED IT TWICE BEFORE AS IF THEY WERE MERELY EXTENUATING CIRCUMSTANCES THAT OTHERWISE WOULD NEVER HAVE VIOLATED YOUR CUSTOMER'S PRIVACY AS WELL AS BEING DEFIANT, ARROGANT AND JUST PLAIN TERRIBLE BUSINESS PRACTICES. BUT NOW IN ADDITION TO PROVING YOURSELVES TO BEING SOCIOPATH MEGALOMANIACS YOU'VE ALSO REVEALED YOURSELVES TO BEING ABSOLUTE CHRONIC LIARS.
AND THAT IS BECAUSE I'M IN CHARGE OF MY COMPANY'S IT DEPARTMENT AND HAVE MANY COMPUTERS UNDER MY CONTROL AND SUPERVISION. I'VE ONLY RECENTLY SWITCHED OVER SOME OF OUR COMPUTERS FROM IE TO FIREFOX AS A TEST AND I AM PRIVY TO WHAT HAS BEEN GOING ON AMONG THE COMPUTERS THAT HAVE BEEN USING FIREFOX AS A TEST STUDY.
AND WHILE THE TRUTH BEING WHAT IT IS, YOU MADE SURE NOT TO MESS WITH MY BROWSER, AS IT IS CLEARLY CONFIGURED NOT TO BE UPDATED, WHICH TO YOUR CREDIT, YOU HAD GIVEN IT A WIDE BERTH, BUT YOU DID SINISTERLY UPDATE SIX COMPUTERS THAT WERE PART OF OUR TEST STUDY
THAT HAD THE SAME BROWSER CONFIGURATION REQUEST NOT TO BE UPDATED BUT WHICH YOU UPDATED NEVERTHELESS. THESE COMPUTERS WERE PART OF A PRODUCTIVITY STUDY WHICH BY UPDATING IT SET THE ENTIRE LITTLE EXPERIMENT OF OURS BACK A BIT.
SO, WHAT AM I GOING TO DO WITH YOU? I REALLY HAVE TO THINK LONG AND HARD ABOUT HOW I RESPOND TO AN ORGANIZATION THAT HAS SHOWN NOTHING BUT THE WORST SORT OF APATHY, DISHONEST BUSINESS PRACTICES I'VE SEEN SINCE BEING IN THE IT INDUSTRY.

Firefox never forces updates on me. I set three settings in the about:config window.
<pre>app.update.auto = false
app.update.enabled = false
app.update.silent = false</pre>

How to get the total record count for the report

Hi,
How can I get count of the total records shown in the report. When we set the report attributes, we have an option "Set Pagination from X to Y of Z"
Does anyone know how can I get the Z value from APEX variables.
I know we can use that query and get the count but I just want to know how we can use APEX Variables effectively.
Thanks in advance.

You write a loop, something like this:
Go_block('B1');
If not form_success then
Raise Form_Trigger_failure;
End if;
First_Record;
If not form_success then
Raise Form_Trigger_failure;
End if;
Loop
If :system.record_status in('CHANGED','INSERT') then
-- modify the record here--
End if;
Exit when :System.Last_Record = 'TRUE';
Next_Record;
End Loop;
First_Record;But be very careful-- If your block can fetch a large number of rows, (over 100), this loop can take a long time, and you should not use this method. The loop will continue fetching more rows from the database until all rows satisfying the query are retrieved.

Help!! My Profile Has Been Deleted for the 3rd Time!

Can anyone help me with this. I just tried to login to discussions, with the same password I have been using for the last year (since the last time this same problem happened to me), and when I tried to login, a popup showed saying "invalid password". I use Safari and Firefox to save the id and password, so I know it is enter properly.
OK. Fine. So I had the reset password sent to my dot mac account. However, when I login in with the reset password, I am immediately sent to the default, first sign up page! What!!!! I have been using my dot mac id for 7 years as my login!
So, I enter in the same alias that I have always used, and I am promptly told that it is already taken!!!???
The last time this happened I had to go through the same process and I lost all my Level points - when from several hundred to Zero, which has happened again!
Can some tell what happened and how I can get my profile and alias back?
I looked up my previous alias and it is still there:
http://discussions.apple.com/profile.jspa?userID=306818
Thanks
Gary Sumlak (really)

4181
Hello Gary,
Your profile (userID=306818) is not deleted, and be sure there is a way to eventually go on with it.
Here's what I would try:
- First, delete your cookies in both Safari and Firefox (in Preferences>Security or Preferences>Privacy), so you make sure to start fresh with no possible interference at all on you browsers' side.
- Then go to "My Contact Info" again, and enter your complete ID as it has always been from the beginning
(should be something like [email protected] ?)
- Now that everything is straight, the only possible problem left is the password:
Try the very first, old password.
If it doesn't work, try the new password I understand you tried to change afterwards.
In any case: do not use autofill; type IDs and passwords yourself this time.
You'll be able to leave it to autofill in the future when the problem will be fixed.
Good luck!
Axl

For the 3rd post I need help..

Ok so I realized I was posting on a no fb account for some reason.. Basically my story goes like this , I've started selling on eBay again. I recently got a very new buyer Contacting me every 10 min asking me questions after purchasing an item such as what is the condition does it work etc.. He then paid 3 days later he has 0 fb.. He asked me 1 day after he will get the item I explained he will get it in the mail box .. He said what if I'm not home I said no the key mailbox that everyone shares the brown one with the slots.. It took me about a day of messaging back and forth how it works.. The next day he says he lives in the basement of a house and there renting .. I ask if he has access to the mailbox we talk about ... Nop he doesn't... So I tell him to ask the owner . For the key It's been 7 days now ( 5 business days) he said he checked the box and it has not arrived.. He lives 2 hours from me So I'm assuming it was there a day after I shipped maybe 2. Does anyone know what happens if mail stays in the big slot of the mailbox for more than a few days is it returned to the owner? I ask this because there are so many people getting mail now and there are only 2 big slots for a whole street! I really don't want to light 30$ on fire because this guy had no clue what he was doing.

Did you use a tracked service like Regular Parcel on this $30 item?If so, when the item is delivered the postie will mark it delivered.After that, the twit is on his own.Give him the tracking number and the Canada Post website (canadapost.ca) so he can see for himself. If not, he will have to talk to his upstairs neighbour, who I presume picks up and passes on all his mail, and let them know he is expecting a parcel. Let him know what the package looks like (kraft envelope/ white paper/ PO box/ poly envelope). Oh and add him to your Blocked Bidder List. Too much drama.

My incoming mail server stopped working for the 3rd time Help?

This is the third time my incoming mail server stopped working any suggestions on how to repair this?
Thank You!

If Apple replaced the logic board three times for the same issue, and the third board has now broken for the same reason, you may be able to ask Apple for a replacement machine. You're out of warranty, and Apple is under no obligation to do anything for you (unless the current logic board was replaced by Apple less than 90 days ago in which case it's still under warranty), however, as a good will gesture, they may be willing to exchange your system for another one. You can start at the Apple store or call Apple customer care directly.

Head count for the 3rd at 3:00am

Similar Messages

Maybe you are looking for