Header condition positive but item condition negative

Hi,
We use a customised Statistical Condition type in the Sales Order.
It is observed that often, whilst the Header Condition value is correct and positive, when the value is getting distributed to the line items, one of the Line item is getting a negative value allocated to it !
Eg:
header condition value is 50.
this is allocated to the various items as follows:
item 1  =     30
item 2  = 20
item 3  =     40
Total    =     50
Item 2 is  getting a value of minus 20 !!!!.
can you let me know how the system allocates the Header Condition value to the Line items ?
Thanks in advance for your help.

hi
i have checked that too and there are no issues there
actually, this has been recurring....but happens in only 1 or 2 documents in a month as compared to the 1000's which are processed.....

Similar Messages

  • Header Condition changing to Item condition

    Hi Gurus
    I have a header condition ZXXX, Client want to change to item condition manual condition and for only ZOR order type only, for this abaper written rounite and working fine.
    But if i made ZXXX header condition to item condition. Does system have any errors with existing open sales orders, deliveries. i have not made any changes in pricing procedure. Will anything changes in conditions of items and header level like subtotals, totals etcs...
    Thanks
    Ramki

    Thanks for your inputs Lakshmipathi, for header condition it is there as manual check in pricing procedure, iam doing this ZXXX as item condition and as manual condition in pricing procedure. if i check this, i do not need to put access sequence in condition type.
    I have a test case - before i change ZXXX as item condition i have created sales order without deliery, with delivery & PGI, and with invoice.
    so after changeing item condition, if i goto open sales order header--> conditions and come back its ZXXX is converting to item condition. if i goto item conditions and come back, its not changing anything.
    Please suggest how to go about this.
    Regards
    Ramki

  • Header condition types and item condition type

    Hello Gurus,
            this is a simple question. does the header condition types are totally same as item condition types ?
    thanks very much!

    hi,
    header:
    If this condition is marked as a header condition, it is possible to enter the condition type in the header condition screen. Checks for changing the condition manually are unaffected by this.
    the header conditions calculate the header value
    item :  conditions of this type are allowed to be entered in the document items. The condition is then only valid for the particular item in which it is entered.
    item condition calculate at item level
    (freight condition)for eg = HD00 is a header condition .here if you have 10 materials and this cond type calculates the freight charges for all the 10 items.
                KF00 is aitem condition.here system caliculates the freight charges only for that particular items.
    Edited by: MANI ROOPA SD/MM on Apr 24, 2008 2:32 PM

  • How to hide the Condition types in item condition screen in Sales Order ?

    Hi Experts,
    We got new requirement from the Client. Pricing Condition types  are ZZBG, ZPBG, ZPBA, ZFSG, ZBDG and ZBHG part in Pricing Procedure. These condition types have Condition records. These need to be hidden in Item conditions screen in Sales Order but other status of the conditions remain unchanged. Pleas provide me the solution earliest  How this we can achieve in a best way.
    Best Regards,
    Srikith

    Hi Srikanth,
    You can achieve this using CONDITION EXCLUSION.
    Maintain Condition exclusion for first condition type its Exclude the condition types which are below to that.
    You must set a condition exclusion indicator for the price. You can do this in two ways:
    If you want to set the condition exclusion indicator a follows then you specify it:
    1..for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
    2.for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
    Hope this will helps you
    Dasaradha

  • Condition type in PO header can be divided in each PO item condition

    Dear all,
    I would like to do as below:
    In PO:
    Item detail:
                       Material A, Qty = 200
                       Material B, Qty = 300
    Header:
        Condition tab: Condition type = Z001 (Freight charge) = 15,000 $
    After that the system auto calculate and update the condition type in Item Condition:
    - Material A, Condition type = Z001 (Freight charge) = 15,000 / (200+300) * 200 = 6,000 $
    - Material B, Condition type = Z001 (Freight charge) = 15,000 / (200+300) * 300 = 9,000 $
    Can I do that?
    How I can configure the system?
    Thanks a lot for your support!
    Rgds,
    CH

    yes, this can be done.
    http://help.sap.com/erp2005_ehp_05/helpdata/en/dd/56177a545a11d1a7020000e829fd11/frameset.htm

  • Diff. between header & item condition

    Pls let me know the diff. between header & item condtion in SD.
    How to define header & item seprately

    Hi Prem,
    You can make a Condition Type a Header Condition by checking the "Header Condition" check box in
    SPRO -> Sales & Distribution -> Basic Functions -> Pricing -> Pricing Control -> Define Condition Types.
    In turn, it can be made an Item Condition by checking the
    "Item Condition" check box.
    In an Sales Order doc you can assign a header condition by choosing the "Display document header details" button at the top right of the screen, then move to "Conditions" tab and Add the Header Condition type to the list of Conditions.
    Similarly, item conditions can be set by selecting the line item and choosing the "Item Conditions" button and adding the Item Condition type.
    Hope it answers your query completely.
    regards,
    Raj

  • Duplicate condtion types accepting in item condition (interesting)

    Hi Sap Guru's,
    When i am entering manual condition type in item condition type column Ex: PR00 basic price 2000/Rs, and again i am entering same condition type PR00 basic price 1000/Rs the system accepting same condition type ?? is there any standard setting to eliminate duplicate condition types in item condition (sales order)
    Point will be rewarded to Everyone for helpful solutions.
    Thanks & Regards,
    San Rao

    Hi ,
    System will considered if the validity periods are diffrent,
    one ,in condition Type  controls you have one option ,manual entries ha priority ,changes which u can made Through this u can control.
    Making manual entries
    Indicator which controls the priority within a condition type between a condition entered manually and a condition automatically determined by the system.
    &WHAT_TO_DO?
    Make the following entries according to your requirements:
    _: No limitations
    A: Freely definable
    B: The automatic entry has priority. If a condition record exists, the condition cannot be entered manually.
    C: The manual entry has priority. When you enter the condition
    manually, the system does not check whether a condition record exists.
    D: Cannot be processed manually
    With best regards,
    venkataswamy.y

  • How can I have the pricing conditions at the item and header level of the d

    How can I have the pricing conditions at the item and header level of the delivery? There exist "condition" tabs both the header and the item level of the delivery but the contents of the tabs are empty. I'll be happy if you can help me. Thanks in advance....

    Hi
    If you want to have the pricing procedure at delivery level then you need to assign a pricing procedure at delivery level also
    Just go through the path to maintain the pricing procedure at delivery level.
    IMG -> Logistics execution -> Shipping -> Basic Shipping Functions -> Pricing -> Pricing Procedure. for Delivery.
    But can you be more clear if the above one is not your query ?
    Regards
    Srinath

  • Header and Item Conditions

    Dear SAPers,
    I would like to know which the use of “header condition” and “item Condition” boxes is in the condition type customizing.
    Could someone explain me what are the effects of this boxes?
    Are the boxes related to the calculation that the system does in the sales order?
    I will reward if helpful.
    Thanks in advance,
    Gaspar

    Hi emilo
    As our friends said,already said , So  Header condiition types  apply for the entire document where as item condition applies to the particular line item i.e., material which you have entered in the line item.
    coming to the point , i hope X means checked for that feild where as
    " " means it is not checked .
    JIAP condition type as you said it is allowed  at  header level as well as item level .If it doesnt has any access sequence , you can enter manually at either item level or header level .
    But the JIAQ condition type is allowed only at header level and not at item level. so if you enter JIAQ condition type at item level in the sales order JIAQ condition type doesnt allow. it will throw an error message
    Reward if useful
    Regards
    Srinath

  • Header and Item Conditions in EBP PO

    HI All,
    I've just checked the pricing conditions in spro of SRM and as per my business requirement I need to maintain both header and item conditions and replicate the values back to r/3 in extended classic scenario like freight,surcharge,discounts e.t.c, with this functionality can we meet the requirement or any additional settings required,kindly advice me.
    Thanks and Regards,
    Sathya kumar.

    Hi,
    Header conditions in PO does not exist !
    You will have to develop it.
    Then you will have to use ECS BBP_ECS_PO_OUT_BADI for modifying the data you send to ECC PO in order to not send the whole price calculated into SRM but dispatch on one side the price before condition and on the other side the different condition type.
    The goal is that R/3 should be able to recalculate the final price based on the condition types you entered in SRM.
    Kind regards,
    Yann

  • Header and Item conditions in MIRO

    Hi All,
    There is a PO created with Import conditions .We have given some conditions in Header level (AED) and some conditions in Item level (Customs duty like SED..etc). We maintaind the vendor (customs-ABCD Vendor) in header conditions as well as  Item level conditions.
    As per the process, we are trying to create the Customs invoice(MIRO) for the PO.This vendor(ABCD Vendor) is FI vendor . While doing MIRO , same Vendor name is appearing two times for selection ."One" is for Item level Conditions and "another one" is for Header level conditions.
    We can select only one vendor, either Item level vendor or Header level vendor . If I select "one" vendor , it will give the item level conditions only..(Here vendor is same for Item and Header level).We can only select and process Item level conditions for that vendor.
    If I select "another one" vendor , it will give the header level conditions only..(Here vendor is same for Item and Header level).We can only select and process header level conditions for that vendor.
    Is there any setting to be done  to appear the header and item level conditions at a time  in MIRO Vendor (if Vendor is same ) in commercial Invoice ?
    Please provide SAP behaviour on these kind of scenerio...
    Thanks

    Hi,
    Header conditions in PO does not exist !
    You will have to develop it.
    Then you will have to use ECS BBP_ECS_PO_OUT_BADI for modifying the data you send to ECC PO in order to not send the whole price calculated into SRM but dispatch on one side the price before condition and on the other side the different condition type.
    The goal is that R/3 should be able to recalculate the final price based on the condition types you entered in SRM.
    Kind regards,
    Yann

  • Header Pricing Condition - distribution to items question

    we have a condition (Freight) that is a surcharge entered as a percentage.  If the condition is 10%, we would like the calcualtion 10% of net value at the header level and then distribute the amount to the line items distributed by weight or volume.
    We tried using the alternate condition base value formula, but then the calculation is the product of surcharge  percentage multiplied by either the weight and volume  instead of the net value.  Is it possible to do the calculation as defined?
    example we would like to occur:
    net value 1000, percentage 10% total value of condition is 100
    line item 1 volume 70 - condition value is 70
    line item 2 volume 30 - condition value is 30
    what is happending using alternate condition base formula of volume:
    net value 1000 percentage condition value is 1 (100* 1) from total volume
    line item 1 volume 70 - condition value is .7
    line item 2 volume 30 - condition value is .3
    thanks for all help.

    you do not need any alt cond base value.
    In the condition type defintion of your freight condition ( T Code V/06) in the defintion, under the scales section , for "Scale Basis" use F - Volume based.
    Mark the condition as Group condition , use group formula 1, Check Both Header / Item Conditions
    When you create the condition record using VK11, mainatin the scales as per the requirement
    For example say from 0 to 1000 - 10% / From 1001 till....... 15%....so on
    Process order and check the results. Please post if you have any further error.
    Regards
    Sai

  • Changing Header/Item condition after billing has been done

    Hi,
    I have an issue in which the sales order is incomplete but invoicing has been done. On seeing the change log I found that new condition type has been added after generation of invoice.
    Now the user wants that entire header/item condition screen should be greyed out after creation of billing document. can it be done through config or user exit is the way,
    My apologies if I posted at a wrong thread.
    Thanks
    Subhadeep

    Hi,
    There is no mechanism to find out if the billing document has been created and sales order will allow changes to pricing even after creation of invoice.
    The point is that, it doesnt matter if the sales order is changed after the invoice has been created, since the values from SO has gone into billing.
    However, if you still wish to lock changes to order once it is billed, kindly refer to some userexit like MV45AFZZ which works during sales order processing and you may get the billing status from VBUK and VBUP tables.
    Regards,
    Amit

  • Item condition copies to Header condition.

    Dear All,
    As per my client scenario I create a BOM and explode at sales order level, and as per requirement I made all level "Main and Sub item" as relevant for price.
    main item is one and have two sub item.
    Create 2 condition type for two subitem, and maintain the record for both, each record cater one sub item.
    Till now every thing is ok, and both subitem price is coming on the related sub item level.
    Now I want that both items condition is copied at header level for pricing purpose ?
    i cant create the condition record for header or main item because item is different.
    Hope all of you understand the scenario... and assist me with your valueable feedback.
    Regards,

    in progress..
    maximum number reach, wants to post new query..

  • Carry over of item conditions to header conditions of an invoice

    I am encountering a situation where the freight conditions at the item level do not carry over to the header in a consistent manner. However, if I look into the item condition and then revisit the header condition, the carried over value magically populates. I am however, unable to save the invoice with this setting. What could be driving this issue and more importantly, how do I fix it? We currently have many invoices in production that  probably have the same issue. Please advice.

    Hi,
    go to V/06
    select frieght condition and see whether you tickmark to HEADER CONDITION option.
    Kapil

Maybe you are looking for