Header Layout - am I going in the correct direction?
Ultimately I would like my site to look somewhat like this:
I am doing my best to learn code and Dreamweaver CS4. I am taking baby steps.
I would appreciate any input 'those in the know' might offer.
Focusing on the header portion of my site - Did I get it (the coding) right?
http://www.canvasAK.me/
(Please ignore colors and such) - After this checks out, I'll move on to navigation.
Any suggested reading/guidance is much appreciated.
Thanks, Eric
Oh, I see. It kind of looked like code and I couldn't be bothered to read all those italics closely enough to see.
Okay, I skimmed it. (Really, the italics are annoying.) It seems reasonable.
I question the null tests toward the end, though. I don't do GUIs, so I don't know if an empty text field gives null or the empty string. Also, you don't want to test for null/empty. Rather, you want to test for NOT null/empty. That is, you do if (this field has a value) { calculate the other fields }.
Finally, for a simple program like this, it's fine to have all those explicit equations. However, another approach--one you'd probably want to take if there were many more values, for instance, calculating a value in the rest of the world's currencies given one of them as input--would be to first normalize to radius--e..g, if diameter is entered, radius is d/2--and then pass radius to a method that calculates the rest of the quantities from radius.
Similar Messages
-
Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
index.html
images
pages
page1.html
page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
mywebsite
index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue. -
I'm having problems with contacts on my iPad. One of my contacts names shows up when I choose any one of 36 contacts. the email goes to the correct email address that I've chosen but the incorrect name shows up in the To: area of the email. Has anyone else experienced this...if so I hope there is a fix
Hello there erika274,
It sounds like no matter what contact you put into the 'To' field, a different name appears, but the email makes it to the intended recipient. I would recommend a few things here. First, close all the open apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I inserted a MP4 video on a page - GMX Tree Service - Tree Trimming, Stump Grinding, Tree Removal Services and Firewood Sales in Toms River NJ - and it plays correctly and is in the correct direction on my PC, but when you view it on your IPad or phone it shows up sideways. Is there additional code necessary to make it play in the correct direction?
Right. You're using XHTML doc type with HTML5 <video> tags. So the W3C code validation is showing invalid code errors. If you're going to use HTML5, you must be consistent throughout.
I don't know which version of DW you have, but in CS5 forward you have the option to use HTML5 doc types. Go to Modify > Page Properties > Title/Encoding. Click on screenshot.
If your version is older than that, you'll need to do it manually in Code View.
See HTML5 syntax
HTML5 Introduction
Nancy O. -
Application: FileNet content SG (Panagon) and MGETDOC(Web application)
Issue: when open a doc, the doc goes to .zip file instead of going to the doc directly. Only this issue happens for .xlsx,docs and pptx document.
Note: On all client machine, we are using office 2007 and IE8 browser
Cause: On 16<sup>th</sup> July 2013, . Net framework 4.5 is install on all our GI-D desktop machines. There after the issue is started .
Application Background: Applications built on .net framework 1.1 and it can support up to 4.0 version on client machine to view the documents through panagon and MGETDOC application. Panagon (Filenet content services) is
not supported in .net framework 4.5 and above.
Work around: After I had troubleshooting and tested with one of our system which has .net framework 4.5, IE8 does not support with HTML5 and tested with IE9 and Chrome, documents were able to open successfully.
I had removed .Net framework 4.5 uninstalled and able to open the documents w/o any issue. And also we had give the work around as if the doc goes to zip file, they open the doc by removing the . zip extension and they can save it as .xlsx or docx file and
they can able to open file.
Please let us know if you there is a fix to export the files through framework 4.5 and do contact us if you need further details, we shall discuss on the same. Thank you for your support. Request you to email @
[email protected]/[email protected]
CandidaPresumably you're using Safari?
You can change that in Safari Preferences (at least in 5.0.3, might be different in 5.1.x)
The checkbox at the bottom will do that for you. However! I strongly advise against permitting that; there have been, and no doubt will be again, malware that uses that to bypass authentication.
Just select Desktop as the default download location so you don't have to dig for the files. -
Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice. -
Exchange rate difference not going to the correct GL account
Hello,
In the transaction OB09, I have given the GL account 702000 for exchange rate difference realized loss and gain.
I have also maintained the exchange rates in the transaction OB08.
In transaction F-44(clear vendor), I give the foreign curreny(EUR) in the entry screen. When I do a charge off difference, however, I need to enter the amount in local currency(USD) because our bank operates in the local currency. When I do a document simulate, it puts the exchange rate difference into another GL account (703030 - that we have defined for unauthorized deductions) and not the one defined for the exchange rate difference(702000). This does not happen if I enter the amount also in the foreign currency.
Could anyone tell me the reason for this and the correction measures.
Any helpful suggestion will be greatly appreciated.
Thanks,
Rugmani
Edited by: Rugmani Rajan on Aug 27, 2008 11:35 AMHello,
The original problem is resolved. The current exchange rate was not getting uploaded to the system and as a result, the old exchange rate was being used. So it was putting the difference into the other account.
That has given rise to another problem. We use the TBEX to upload exchange rates from a centrally maintained spreadsheet. The upload is giving the following errors:
Securities master data EUR do not exist!
Interest rate master data CNY is missing
Suggestions and correction measures will be greatly appreciated.
Thanks,
Rugmani -
Computers not going to the correct DP.
Running into a small issue with one of our Distribution Sites, I have deployed a DP only using https, along with their corresponding Boundary Group,
SCCM is reporting that it deployed successfully. However, When I enabled the Client Push installation, as opposed to going the local DP, the clients are coming back to the Primary site DP, and this is causing network issues. Right now I have eliminated
the situation by disabling the network port on the Primary Server and disabling the Client Push installation. I'll enable the network over the weekend, when the network is not needed. However I still need to figure out why the computers did not
go to the local DP.
Going through the log on several client this is what I am seeing: I replaced my Server names and domain names.
Discovered 2 local DP locations. ccmsetup 4/25/2014 9:59:10 AM 2864 (0x0B30)
PROPFIND 'https://DPServer.Domain/NOCERT_SMS_DP_SMSPKG$/CAS00003' ccmsetup 4/25/2014 9:59:10 AM 2864 (0x0B30)
Failed to send HTTPS request. (Error at WinHttpSendRequest: 12029) ccmsetup 4/25/2014 9:59:11 AM 2864 (0x0B30)
Failed to check url https://DPServer.Domain/NOCERT_SMS_DP_SMSPKG$/CAS00003. Error 0x80072efd ccmsetup 4/25/2014 9:59:11 AM 2864 (0x0B30)
PROPFIND 'https://DPServer.Domain/SMS_DP_SMSPKG$/CAS00003' ccmsetup 4/25/2014 9:59:11 AM 2864 (0x0B30)
Failed to send HTTPS request. (Error at WinHttpSendRequest: 12029) ccmsetup 4/25/2014 9:59:12 AM 2864 (0x0B30)
Failed to check url https://DPServer.Domain/SMS_DP_SMSPKG$/CAS00003. Error 0x80072efd ccmsetup 4/25/2014 9:59:12 AM 2864 (0x0B30)
Enumerated all 2 local DP locations but none of them is good. Fallback to MP. ccmsetup 4/25/2014 9:59:12 AM 2864 (0x0B30)
GET 'HTTPS://PrimarySvr.Domain/CCM_Client/ccmsetup.cab' ccmsetup 4/25/2014 9:59:12 AM 2864 (0x0B30)
I thought it my be an issue with the certificate, so I a deleted it on the server, re-enrolled, exported it using to export the private key, and selected .PFX, I did not select any sub options for certification path, deleting the private key, or export
all extended properties. Applied a password and copied, and inserted it into the properties for the DP, with the same password. But that didn't alleviate the issue, as I assume since the clients were already pulling from the Primary site, there
was no way to re-direct them. But I don't know if that will fix the issue, is there any way I can test to verify this?
Or am I going down the wrong rabbit hole?
Mark EI have my DPs as HTTPS only, and I am curious, prior to install the DPs I enrolled the server to the certificate and exported it to the Primary Server. I am curious if we set up the wrong type of certificate, the certificate's intended purpose is
Server Authentication. According to this: http://technet.microsoft.com/en-us/library/230dfec0-bddb-4429-a5db-30020e881f1e#BKMK_clientdistributionpoint2008_cm2012 - It should be Workstation Authentication Certificate? -
Some exported movies from old digital have gone into the incorrect year. How can I move them around into the correct year or at the very least move them in the current year but in chronological order eg under 2011 I have listed them as 2004 - blah blah, 2005 blah blah but they are "all over the place". Thank You
There are two ways to do this.
The simplest is to right-click on the clip in the Event and modify the date.
See iMovie Help here http://help.apple.com/imovie/#mov3ac6c398
If you have a long clip that you would like to split into smaller clips, there is another way. You can drag the long clip into a free tool called MPEG Streamclip from Squared 5. In MPEG Streamclip, put your playhead on the in point of your first smaller clip and type I. Then set the playhead on the out point of your first smaller clip, and press O to set the out point. Then FILE/EXPORT TO QUICKTIME. If your clip is DV, As you save the clip, rename it in the form clip-yyyy-mm-dd hh;mm;ss.ext, where the word "clip" must be lower case. YYYY is year. hh is hours in 24 hour time. Then repeat this process until you have all your smaller clips made. Finally, you can import all these clips into an iMovie Event using FILE/IMPORT MOVIES. -
Apple Products: 2 IPAD 2's. iMac, 2 Iphone4S, iphone 3S, Ipods. I have 1 itunes account and make play list, for each device that needs to sync, but it seems I might have to have multiple accounts? Also same thing with photo library on my iMac. I would not want to have multiple accounts if I don't need to. But it seems the ipads can not send Messaging or use the Apple talk to each other because I use the same Itunes account? There is no manuls to set these up. If just one person, all would work fine. But this is a family....
Contact the store directly.
-
Site not going in the right direction?
Good day all!
Got a little problem! Hear's one of my sites>
http://www.winterslippers.com
go hear all looks to be ok right? NO! There is spoused to be some
flash elements on the home page! So this is what is spoused to
happen! You type in the addie and you get taken right hear!>
http://www.winterslippers.com/Library
and if you go hear you'll see the flash elements working just fine!
Now I know this is the issue because there is another 15 sites
related to us and our server went through a bit of an update and
after this happened whenever we type in another of our url's we get
taken to "www.blablabla.com/
Library" and all the flash works fine for the them apart
from two sites the one I've talked about here and another.
Why not just ask our server for help I hear you all screem at
your moitors??
Well they are very good at fixing the problems I throw at
them... but they can take a very long time to get back to me. So
far I've been waiting two weeks for a replay.
So if anyone could point me in the right direction that would
be just super douper great (bit weird!)
Thanks all!!>>>spoused
supposed
>>>addie
URL
>>>moitors
monitors
corse i cud be wrong
Jo
"Walt F. Schaefer" <[email protected]> wrote in
message
news:f1am9g$tv$[email protected]..
>>>spoused
>>>addie
>>>moitors
>
> HUH?
> --
>
> Walt
>
>
> "satrop" <[email protected]> wrote in
message
> news:f1ahng$oh7$[email protected]..
>> Good day all!
>>
>> Got a little problem! Hear's one of my sites>
>>
http://www.winterslippers.com
go
>> hear all looks to be ok right? NO! There is spoused
to be some flash
>> elements
>> on the home page! So this is what is spoused to
happen! You type in the
>> addie
>> and you get taken right hear!>
http://www.winterslippers.com/Library
and
>> if you
>> go hear you'll see the flash elements working just
fine! Now I know this
>> is the
>> issue because there is another 15 sites related to
us and our server went
>> through a bit of an update and after this happened
whenever we type in
>> another
>> of our url's we get taken to "www.blablabla.com/
Library" and all
>> the
>> flash works fine for the them apart from two sites
the one I've talked
>> about
>> here and another.
>>
>> Why not just ask our server for help I hear you all
screem at your
>> moitors??
>>
>> Well they are very good at fixing the problems I
throw at them... but
>> they can
>> take a very long time to get back to me. So far I've
been waiting two
>> weeks for
>> a replay.
>>
>> So if anyone could point me in the right direction
that would be just
>> super
>> douper great (bit weird!)
>>
>> Thanks all!!
>>
>
> -
Using Divs/Layers - am I going in the right direction?
Decided to give divs a try and get away from tables cause
everyone says I
should :-)
Teaching myself from scratch about them and just wanted
guidance on how it
is going so far.
I am trying to construct my template and have created one
test page.
http://www.mmmcommentaries.com/test/index.htm
I am creating the site by just setting up a div for each area
- main body,
menu, banner.
Is this the right way to do it or is there a better way? I
suppose I am
still thinking like a tables user in that I am setting up a
cell (div) for
each item.If you remove this line -
<?xml version="1.0" encoding="iso-8859-1"?>
your page will render in Standards mode in IE, rather than
quirks mode. You
don't need that line currently, so it's safe to delete.
Your concern about the menu is well placed. Horizontal menus
always run the
risk of breaking when the text is resized in the browser.
Yours will too.
But, to spread things out a bit, you need to manage the
padding and the
width of the div#nav ul li a rule.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Koenig" <[email protected]> wrote in
message
news:e3rn3o$54h$[email protected]..
> Thanks very much for those links - spent an interesting
morning teaching
> myself this (I think!)
>
> I am hoping you can help me with a small problem.
>
> I have a menu bar on it now - just as simple thing but I
want to make the
> text for the menu items bigger without making the items
run onto two
> lines.
>
> There seems to be plenty of space on the line for them
to sit but I have
> played around with the settings and forthe life of me
can't work it out.
>
>
http://www.mmmcommentaries.com/test/index.htm
>
> Thx
> Trev.
>
> -
i was using my email as normal this am on my ipad and the imac... i then started getting messages cannot connect to mail password or username incorrect.. i can get into my account on my desktop going in through safari so what has happened!! cannot get into my mail on any of our apple appliances..
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Try deleting and re-adding the email account (Settings App > Mail,Contacts,Calendars) -
How can I see the heading of a column, whilst at the bottom of a document?
I'm doing a long list of expenses, and the headings are at the top of columns. Now I've filled in many rows, I have to go up and down the page to see the heading make sure that I fill the correct column in. Is there a way of splitting a document across the middle (or something like this) so that I can always see the heading at the top of the column even though i am way down the page?
thanks so much - NigelHello
There is a really simple workaround
Duplicate your table and, in the copy, remove every rows minus row 1 thru 7.
You will be able to leave the new table (name it "header7" for instance) at the top of your screen
and put the main one just under it.
Doing that, you will be able to scroll in the main table.
If the contents of the seven top rows may be modified.
Replace the contents of the cells in header7 by a formula looking like that:
A1 =mainTable :: A1
So the changes in row 1 thru 7 in mainTable will be reported in header7.
Yvan KOENIG (from FRANCE lundi 7 janvier 2008 18:31:14) -
The TOC in my generated project is not navigating to the correct subfolders
The TOC in my generated project (Multiscreen HTML5/Andriod (Desktop) layout) is not opening to the correct sub folders.
For example, when selecting a Level 1 folder (say the one highlighted in orange), it will jump to a Level 3 list of topics in a completely different level 1 structure (say the list highlighted in green)
Level 1
Level 2
Level 3
Level 3
Level 3
Level 2
Level 3
Level 3
Level 3
Level 1
Level 2
Level 3
Level 3
Level 3
Level 2
Level 3
Level 3
Level 3
I have looked at the TOC report, everything is fine there, the TOC in roboHelp looks fine as far as I can see.
I have noooo idea how to fix this!Check what is happening in webhelp. Same problem there?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
I am having an issue with mail.app on ML. The first launch worked fine but the app hung on finding conversations. Now when I launch the app it will just hang until I force quit. Any ideas?
-
How to suppress the report based on outer dimension in nested report
Hi Experts, We have a report with nesting of two dimensions in rows. They are Program dimension and Account Dimension. We need to supress the report based on the program dimension members. i.e whenever there are no values against all the accounts for
-
1.4.2_06 Hotspot Considered Harmful
The following 23-line program, containing no library calls and nothing even remotely "tricky", consitently crashes the JVM on every Linux or Windows box we ve tried it on. We tried filing a bug report, but since someone once fixed a problem (5009717)
-
I am trying to download QT 7 Pro,but it seems impossible!
As i try to end the buy,it keeps asking my area code etc. I am in Greece. I don't understand why.
-
Can I have a Vivid turning image Slider as my background?
I have tried Hi Slider for making jQuery Slider, but I found it is for Html and some blogs. I want to get a still freeware to make image slider that can be used on my mobile phone as the background. Maybe it is cool!