Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

Similar Messages

Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Record not appearing in custom infotype without selecting the period.

Hi All,
I have created a HR Custom Infotype for Medical Examination. Whenever i create a record for a particular employee and again i click on the Display button for the same employee, a message is diplayed "No data stored for Medical Examination details in the selected period". And when i select the ALL radio-button in the period selection area,only then the record is displayed. Why is it so that manually i need to select the ALL radiobutton to display the record? It is not so for other infotypes. Is there any solution for this, i mean can we change some settings to resolve this issue?
Thanks in advance,
Arpita Raizada.

In PA20/30 we have period from and to dates on screen. If any date is entered on these screens then data from infotype is displayed based on these dates.
If your record doesn't overlap/falls with these entered dates then system displays the message. Changes the period dates accordingly and system will display the records valid as of entered date.
Regards,
Ramnivas

Session variable not storing in custom trigger

I have a custom trigger in which I want to store a session variable , so i can use the value in the insert transaction which happens after. But for some reason the session variable is not stored, resulting in the data not being stored.
any clues would help.
rudi
here are the relevant code:
//start Trigger_Custom_Subject_Mentor trigger
function Trigger_Custom_Subject_Mentor(&$tNG) {
//Check subject exists
@session_start();
$_SESSION['sb_id'] = $subject_id;
//end Trigger_Custom_Subject_Mentor trigger
// Make an insert transaction instance
$ins_share = new tNG_insert($conn_smart);
$tNGs->addTransaction($ins_share);
// Register triggers
$ins_share->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
$ins_share->registerTrigger("END", "Trigger_Redirect", 90);
// Add columns
$ins_share->setTable("`share`");
$ins_share->addColumn("share_item", "NUMERIC_TYPE", "POST", "share_item");
$ins_share->addColumn("share_subject", "NUMERIC_TYPE", "SESSION", "sb_id");
$ins_share->setPrimaryKey("share_id", "NUMERIC_TYPE");
// Register triggers
$ins_share->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
$ins_share->registerTrigger("BEFORE", "Trigger_Custom_Subject_Mentor", 50);
$ins_share->registerTrigger("END", "Trigger_Default_Redirect", 99, "share.php?item_id={share_item}");

hi User,
1) Pull a dummy column in Fx use the Session variable --->(Variable -->session )
2) Next, goto narrative view in Narrative view section use @1
3) If u want you can hide the column that we created in criteria section

Custom infotype - issues with conversion class - making fields display only

Hi,
I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well. Appreciate your help in this regard.
Thanks,
Kumar.

Hi Venkata,
Check this document.
This explains about custom infotype creation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
regards,
Brinda L

How to transfer data between a multi-thread dll build with LV7 and MS C++, using envent programing method.

It is easy to transfer data between a simple input/output dll build with LV and an external code like C++, but when data are available inside a loop running in the dll(in fact thread running in LV); How can I read them or receive an handle pointer to the calling C++ application when new data are ready.

If you're using LabVIEW 7, you can use the PostLVUserEvent function to fire an event for an event structure in LV. Refer to the Using External Code in LV manual.
Or you could use datasocket for this. The datasocket activex dll is nids.dll. You could have the class wizard generate wrappers for you or if you have Measurement Studio, you could use the custom wrappers it provides to communicate between the VI and dll.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Not to Update custom infotype

Hi Expert,
I have one custom FM which is used to update the custom infotype but my requirement is when it get fail it should not update
the infotype but it is updating.Befor this FM we are performing operation i. e MASSN 07,08, .
This requirement is based on contract renewal when contract is not renewed it should not update custom infotype bue it is
updating when contract is not renewed through the above FM.
please give me some idea so that custom infotype should not get updated when contract is not renewed.But it is
updating the infotype what should i put to not update the infotype when contract is not renewal.
Below is my listed code.
    IF lv_action = '09' OR lv_action = '07' OR lv_action = '08' AND lv_cr_renewal = ''.
    CALL FUNCTION 'ZF_HCM_ALM_ABSENCE_DATA'
        EXPORTING
          i_pernr                 = lv_pernr
          i_effective_date        = lv_date
          i_updation              = 'X'
TABLES
T_ABSENCE_DATA          =
      t_return                = lt_return_absence
Regards,
Md
Edited by: MdAddu on Jun 26, 2011 9:33 AM
Edited by: MdAddu on Jun 26, 2011 9:52 AM

Hi,
Write the code as :
IF ( lv_action = '09' OR lv_action = '07' OR lv_action = '08' )
AND lv_cr_renewal = ''.     "-- contract renewed ...
CALL FUNCTION 'ZF_HCM_ALM_ABSENCE_DATA'
EXPORTING
i_pernr = lv_pernr
i_effective_date = lv_date
i_updation = 'X'
TABLES
T_ABSENCE_DATA =
t_return = lt_return_absence
Regards,
Srini.

Last Dunning Data not generated for customer account

Hi Gurus,
I have run the Dunning for a customer, it was successfully data generated to the customer account and able to see dunning history until 1st and 2nd runs, but 3rd and final dunned but no data generated for the particular customer.
In this time i find few other line items are additioned to the previous line item.
The 3rd dunning days are already exceeded the grace days, but not data generated because of additional items are not eligible for dun this time they have good enough time as grace days.
So this is caused, and no data generated to the for the respective line item which has to get the data for it's 3rd dun.
When i run for some future time 3rd dunning was successfully got and data updated, for additional items also got dunned 1st reminder this time because they are also eligible this time..
In my dunning procedure i have selected for always dun for all intervals and print line items for last dun.
Your inputs are highly appreciated.
Thanks in advance, points are avails.
Thanks,
Vyas

Hi
Any Updates on this ..
Thanks in advance,
Vyas

Text fields are not displayed for custom infotypes in Adhoc query

We have developed a custom infotype , which we had incldued in the adhoc query. when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
please let me know , how to add text in the out filed filed
thanks
rajaram B bhat

HI
But in the out put filed , when i click on the output filed , i am get three drop downs , only text , only value and valu & text.
Only value is enabled and other two ate disabled.
How to enable the othet two , i.e text only and value & text
thanks & regards
Rajaram B Bhat

Problem with tab strip in report programing

hi,
I have coded 4 tab strips in a report program.Each tab has some obligatory fields.
My requirement is user must fill all obligatory fields.
suppose if I enter values only one tab and execute , its not asking the obligatory fields in other tabs.may be this is the behaviour of tab strips.
To check the obligatory fields,I wrote cheks in at selection screen with error message.In this case, suppose I didnt enter values in 2nd tab, the error message is coming under 1st tab screen and I am not able to select the 2nd tab.
Can any body tells me how to overcome this issu.
pavan meda

Hi,
Check this example..
Basically you have to check the sy-ucomm not equal to the tab button function code (marked in bold)....
Note: The only thing is I have to press the second button twice to get to the second tab..But it works..
SELECTION-SCREEN BEGIN OF TABBED BLOCK tb1 FOR 10 LINES.
SELECTION-SCREEN TAB (30) tab1 USER-COMMAND tab1 DEFAULT SCREEN 1001.
SELECTION-SCREEN TAB (30) tab2 USER-COMMAND tab2 DEFAULT SCREEN 1002.
SELECTION-SCREEN END OF BLOCK tb1.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
PARAMETERS: p_1 TYPE matnr.
SELECTION-SCREEN END OF SCREEN 1001.
SELECTION-SCREEN BEGIN OF SCREEN 1002 AS SUBSCREEN.
PARAMETERS: p_2 TYPE kunnr.
SELECTION-SCREEN END OF SCREEN 1002.
INITIALIZATION.
tab1 = 'Material'.
tab2 = 'Customer'.
AT SELECTION-SCREEN.
 CHECK sy-ucomm <> 'TAB1' AND sy-ucomm <> 'TAB2'.
IF p_1 IS INITIAL.
MESSAGE e000 WITH 'Required entry'.
ENDIF.
IF p_2 IS INITIAL.
MESSAGE e000 WITH 'Required entry'.
ENDIF.
START-OF-SELECTION.
WRITE: / p_1.
WRITE: / p_2.
Thanks,
Naren

How to code with tab strip control in se38

HI masters,
In SE38 i created tab strips with 4 tabs in selection screen. Each selection screen having 4 or 5 input fields.So whenever user click on first screen he will fill the input on that screen, and based on that fields only he will get information. Each tab is totally differ from other tabs, i mean first tab is orders and second is invoice like that. so there is no connection betwen tabs data. Everything is individual tabs.
I dont know how to code that.Can you plz help me how to code that? Thanks in advance.Its very urgent.

To create a tabstrip control area, choose Tabstrip control from the object list in the Screen Painter and
place it on the screen. Fix the top-left hand corner of the table control area, and then drag the object to
the required size.
Assign a name to the tabstrip control in the Object name attribute. You need this name to identify your
tabstrip control.
In your ABAP program use the CONTROLS statement to declare an object with the same name. Use
TABSTRIP as the type.
The type TABSTRIP is defined in the type pool CXTAB. The field ACTIVETAB contains the function
code of the tab title of the currently active tabstrip. The other fields are reserved for internal use.
The default number of tab pages for a tabstrip control is two.
Technically, tab titles are treated in the same way as pushbuttons. They have a name, a text, a function
code, and a function type. You enter these in the Name, Text, FctCode and FctType fields of the object
attributes.
A tab title can have the function type ' ' (space) or 'P'. If the function type is ' ' (space), the PAI
processing block is triggered when the user chooses that tab, and the function code of the tab title is
placed in the command field. If the function type is 'P', the user can scroll between different tab pages of
the same type without triggering the PAI processing block. For further details, see the following pages.
If you want your tabstrip control to have more than two pages, you must create further tab titles. To do
this, choose Pushbutton from the object list in the Screen Painter and place it in the tab title area.
You must assign a subscreen area to each tab page.
The subscreen area assigned to a tab page is automatically entered as the Reference object (in the
Dictionary attributes) for the tab title of that page.
To assign a subscreen area to one or more tab pages, choose the relevant tab title in the fullscreen
editor, choose the Subscreen object, and place it on the tab page.
Alternatively, you can assign a single subscreen area to several tab pages by entering the name of the
subscreen area directly in the Reference object field of the attributes of the relevant tab pages.
If you have assigned a different subscreen area to each page element in a tabstrip control, you can
scroll between the pages locally at the front end.
To do this, you must send all of the subscreens to the front end when you send the main screen itself. All
of the tab titles in the tabstrip control must also have function type 'P'.
Now, when you scroll between the different page elements, there is no communication between the
presentation server and the application server.
When the user chooses a function on the screen that triggers PAI processing, the system processes the
PAI blocks of all of the subscreens as well. This means that all of the field checks are run. In this
respect, you could regard the tabstrip control as behaving like a single large screen.
Local scrolling in tabstrip controls is more appropriate for display transactions.
Screen Painter:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN subarea1
INCLUDING SY-CPROG '0101'.
CALL SUBSCREEN subarea2
INCLUDING SY-CPROG '0102'.
CALL SUBSCREEN subarea3
INCLUDING SY-CPROG '0103'.
PROCESS AFTER INPUT.
CALL SUBSCREEN subarea1.
CALL SUBSCREEN subarea2.
CALL SUBSCREEN subarea3.
ABAP:
CONTROLS: my_tab_strip TYPE TABSTRIP.
To program a tabstrip control to scroll locally at the front end, you must:
Assign
a separate subscreen area to each tab page; a subscreen will be sent to each of these
when the screen is processed.
Call
all of the subscreens from the flow logic.
Assign
function code type 'P' to all of the tab titles.
The system hides any page element whose subscreen contains no elements that can be displayed.
If there are no page elements containing elements that can be displayed, the system hides the entire
tabstrip control.
Hope this is helpful, Do reward.

Issues with dates not storing correctly on a data entry screen

We are using Application Express 3.0.1.00.08
I have a table which I have written a data entry screen for, the user enters most of the fields on theentry screen, howevere there are some fields that I would like to populate when a biutton is pressed e.g last_updated_date and creation_date.
I have a on submit after computations and validation process with the following code to set the last updated date:
begin
:P1_LAST_UPDATED := to_date(sysdate,'DD-MON-RRRR HH24:MI');
end;
I am setting the creation date at the same time as getting the primary key as follows:
declare
function get_pk return varchar2
is
begin
for c1 in (select XX_SVS_SEQ.nextval next_val
from dual)
loop
return c1.next_val;
end loop;
end;
begin
:P1_ID := get_pk;
:P1_CREATION_DATE := sysdate;
:P1_CREATED_BY := :F380_OSS_USER_ID;
end;
However the dates are being written to the database incorrectly they are being written with a year 0009 instead of 2009.
Does anyone know how I can get hidden dates in a data entry form to write correctly to the database.
Regards
Kay

It could be done as a database trigger but surely APEX should be capable of saving the correct date format of an item.
Since my original post I have managed to get the dates stored with the correct year in the hidden fileds by doing the following in my process:
:P1_LAST_UPDATED := to_date(sysdate,'DD-MON-RRRR HH24:MI');
however for some reason the date is being stored with the correct year now as 2009 , but the time element is not being stored any ideas?

Data not Updated in Custom Screen fields-Vendor Master

Hello,
I have created a custom screen in vendor master transaction and also implemented the two BADI's below.
Business Add-In: Processing Master Data Enhancements
(CUSTOMER_ADD_DATA/VENDOR_ADD_DATA)
Passed the Custom Program and Screen No in the method GET_TAXI_SCREEN
Business Add-In: Customer Subscreens
(CUSTOMER_ADD_DATA_CS/VENDOR_ADD_DATA_CS)
activate it with the BADI Processing Master Data Enhancements with method CHECK_ADD_ON_ACTIVE.
I also created a new screen and used few fields from LFA1 (Append structure fields) such that the fields on the screen are : LFA1-ZZFIELD1 etc...
Now the issue is the screen is displayed, but the data entered on the screen is not updated on the table LFA1 or data from the table is not displayed on the custom screen.
Am i missing something?
Regards,
Shiva

Solved this problem.
I built the query against InfoCube and not the characteristic itself. That's why I can't see the update.
Thanks.

Packaging data not populated in customs declaration

Hi all,
I'm creating Pro-forma invoice in ECC and as a result Custom Declaration is getting created in GTS. In GTS the Packaging data in item level is coming as empty. So I implemented the BADI /SAPSLL/IF_EX_IFEX_SD0C_R3 and tried to pass the packaging data. But as a result the custom document stopped getting created in GTS.
I'm using the below code to populate the fields of the table cs_itm_cdoc-pge-
LOOP AT lit_vepo ASSIGNING <lfs_vepo>.
 lwa_itmpge-item_number = <lfs_vepo>-posnr.
 lwa_itmpge-int_id = <lfs_vepo>-vepos.
 lwa_itmpge-quantity = <lfs_vepo>-vemng.
 lwa_itmpge-dim_uom = <lfs_vepo>-vemeh.
 APPEND lwa_itmpge TO cs_itm_cdoc-pge.
 CLEAR lwa_itmpge.
 ENDLOOP.
I'm taking the value of <lfs_vepo> from the standard table vepo. Can anybody please tell me what I'm doing wrong?
Thanks,
Sarif

Hi Dave,
I’m new to GTS. I’ll list the steps here which I’m following-
1. 1. In ECC, In tcode VF01, put Billing Type = ‘F8’ and Document = Outbound Delivery ID
2. 2. Click Save, the billing document in ECC will be saved
3. 3. In GTS, go to tcode /sapsll/menu_legal
4. 4. Go to Customs Management->Export->Display Customs Declarations.
5. 5. You’ll see a new document has been created with reference to the billing document in ECC.
6. 6. Open the document. Go to Item Details->Packaging Data.
7. 7. The packaging details is empty.
This is the current default behavior. Now my job as an ABAPer is to fetch the packaging data from VEPO table and fill it in the BADI /SAPSLL/IF_EX_IFEX_SD0C_R3 so that it gets reflected in GTS.
But when I’m trying to do it the custom document in GTS isn’t getting created at all. Note that it’s getting created properly when I’m removing the coding related to the packaging data. So obviously I’m doing something wrong here. Do I need to fill the packaging data for header as well? Also the field for container is currently empty, do I need to fill it? If yes, where shall I get the data?
Thanks,
Sariful

Data not storing in Custom infotype build with tab strips

Similar Messages

Maybe you are looking for