Headset disconnect​s when dialing

Greetings,
I have a BB Curve 8900 and for the last few months my headset/earbud connects when I turn it on, but when speed-dialing it disconnects. I have to turn the headset on then off to get it to work, while the call is dailing. I've tried this with two headsets, my old one and a new one. Same thing seems to happen. Any suggestions?
Thanks,
Mark

Wired headsets or Bluetooth?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Player blocks when USB Headset disconnected during playback

    I am playing a Wav file in my application & using a USB Headset to listen to the playback.
    I'm observing the following behavior while doing this:
    Scenario-USB headset is connected when the application starts up.
    a) Am able to hear the voice on the USB headset when I play the wav file. Also, I get the visual Control Panel component for the player and add it to my application UI.
    Code Segment 1:
    //create player
    //start playback
    //player.start();
    Code Segment 2:
    //In controllerUpdate(ControllerEvent ce)
    //for RealizeCompleteEvent
    if (event instanceof RealizeCompleteEvent) {
    //get the Control Panel Component for player
    Component comp = player.getControlPanelComponent()
    //add the component to the UI
    b) javax.media.StartEvent is fired when the playback begins.
    c) I then disconnect the USB Headset while playback is in progress. The saddle on the Control Panel Component slider bar pauses at it's position as soon as the headset is disconnected. Also, when this happens, no event is fired.
    d) At this stage, if I try to stop the player using a Stop button on my UI, my application hangs. The stop() method called on pressing the Stop button has the following code:
    Code Segment 3:
    //in stop()
    //stop player, close it & deallocate resources
    player.stop();
    player.close();
    player.deallocate();
    In the above steps, no exception is ever thrown nor any event fired signalling the disconnection of the device in use(headset).
    I need to detect the disconnection of my USB headset & prevent the player from blocking, so that I can stop the player & release the resources in a clean way.
    Any suggestions in this regard would be appreciated.
    Thanks!
    ~thebadgrover

    Hi, did you resolve your problem? I have similar problem to detect when a capture device is disconnected.

  • Bluetooth headset disconnecting when not in use

    I noticed that when not in use, the Sony Bluetooth headset disconnects from the phone. Didn't see that problem with the Samsung Galaxy Music. Is this a battery saving feature of Stamina mode?
    Solved!
    Go to Solution.

    Hi, 
    Depending on which headset you are using the headset may disconnect to a kind of standby mode. The headset will auto connect to your phone when you are placing or receiving a call. Depending on which software you can also force a connection by tapping the call button. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • Bluetooth headset disconnects if not in iTunes

    I have a Creative WP-450 Bluetooth Headset.
    I have a MacBook Air Summer 2012.
    I connect my headset.
    iTunes pops up.
    All is fine as long as I listen to music in iTunes.
    IF I close iTunes and stream media throug my browser or do anything other than listen to music on iTunes (ie play a game) the headset beeps every 2 minutes for a bit and then the headset disconnects.
    There is nothing wrong with the battery, I can listen to iTunes for hours with no issue.
    I can listen to my music on my phone for hours and hours.
    Minutes after pairing and closing iTunes on my Air, headphone beeps and then headphone shut-down.
    WHY? Its killing me! I want to use these for ventrillo or skype or just watching cartoons.
    Does anyone have any suggestions?

    Hi, 
    Depending on which headset you are using the headset may disconnect to a kind of standby mode. The headset will auto connect to your phone when you are placing or receiving a call. Depending on which software you can also force a connection by tapping the call button. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • My Airport disconnects randomly when USB disk is attached..HELP NEEDED !!!!

    My Airport Extreme disconnects randomly when USB disk is attached, I have searched this forum but found now obvious solution.
    The Airport Extreme has the latest firmware.
    Since the airdisk solution is quite useless at this time, I would kindly accept any kind of help .....thanks
    Sieber

    Len61 got my reply, I have copied below.
    Hi - I have been on the phone with support 4X since late December - all good calls. They have been scratching their heads on this issue.
    I have 2 printers and 2 drives on the airport -recent experieinces = printers have always behaved, drives have appeared / vanished / "drive needs repair" and it's just fine...
    Cutting out the interim fixes, here are the simple but important solutions and everything has been stable for days now.
    * rolled back to AEBS firmware 7.1.1
    * replaced the passive USB hub with a powered hub ** This is when joy arrived
    * make sure your drive has a block size of 512
    You can run guest mode however you want, since adding the new hub, it hasn't mattered.
    I haven't been brave enough to upgrade firmware to 7.2.1
    cheers

  • How to turn off number sounds when dialing out?

    ?  I have the keyboard sound off already, but, when I dial out the numbers are not silent.

    The keyboard is just that, ...the keyboard, ....used only for text, email and web.  The phone dialing screen is totally different and is uneffected by any changes you make to the keyboard settings.  The only way to silence the phone when dialing out is to either turn the volume all the way down (not logical) or to engage the mute slide on the side of the phone.  **Warning, ...both options also turn the ringer off or down.  I would like to see apple address this in the next update.  Users don't need to hear these loud numbers.

  • My iphone 4s connects and disconnects (repeatedly) when connected to my computer

    my iphone 4s connects and disconnects (repeatedly) when connected to my computer, it works perfectly fine when connected to regular chargers, everytime i connect it to my computer it shows the charging symbol and then disconnects and reconnects in less then a second, it will repeat this process forever unless disconnected, sometimes it works perfectly fine and most of the times it does the same thing, I know for a fact its not the wire because i recently bought an ipad mini with retina and its usb is new, it worked with the retina for a day or two and then it kept connecting and disconecting repeatedly, my computer is two months old and i have new hardware in that machine, is it a problem in the usb power fluctuation? i am currently using windows 8.1 and i need solutions, this is super annoying, all my other devices work perfectly fine with the usb ports, all my usbs (2.0 and 3.0) do the connecting and disconnecting sometimes it even works ,what is the problem?

    Hello Aqib2024,
    Thank you for providing the details of the issue you are experiencing with your iPhone 4s.  You have taken some really good steps to isolate the issue.  I recommend following the steps in the article below to further isolate and troubleshoot this issue:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Contact picture when dialing

    When dialing a number from my "contacts" the picture shows up underneath the overlay. Everyone else's phones I have seen (including the ones in the Apple Stores) show the contact picture at the top of the screen next the name. How can I get my iPhone to do this? I have a 16GB, 3G, and 2.0.2 update. Thanks.

    You can search these discussions with the little search box to the right. I put in the search contact + picture and found your answer here: http://discussions.apple.com/thread.jspa?messageID=7487288&#7487288

  • HT1338 After starting to download the Mountain Lion software, my wifi connection was disconnected. When I attached the ethernet cable, the downloading software was gone, and when I tried redoing the process, the app store would not accept the code. What d

    Hey,
    I just tried redeeming my software online. I went through the whole process, got the password, and proceeded to get the software to download. But soon after, the wifi connection was disconnected, and when I tried to connect the ethernet cable, the entire software had disappeared from my launchpad. When I tried to restart the download, it kept saying that the password had already been used before, and that it could only be used once per computer. What do I do now?

    You shouldn't have to re-enter the code, Lion should be on your purchases list so you can re-download it.  In the App Store, click Purchases...  do you see ML there?

  • Can`t hear when dialing out

    i get this problem when dialing a number. i can`t hear the other phone ringing or the person talking but they can hear me saying "hello"  sometimes i also can`t hear messages that are sent to me(email,text) that contain music or speech. sometimes this problem goes away if i activate voice dialing. any ideas ? i brought it back to where i bought it and they had no idea what was wrong.

    Go into your Phone icon, from there display the menu and go into Options, then General Options. Try setting the default call volume to 100%. Also during a call if you hit the "Volume Up" button to increase the volume if you set the above percentage to something lower
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • My internet continually disconnects.  When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem.  Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".

    My internet continually disconnects.  When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem.  Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".
    Any ideas?  I probably have something wrong in my computer settings.

    You should restore your modem to router condition and set the Airport Express to 'Bridge Mode'. A full explanation and the method of doing this is here:
    http://www.wilmut.webspace.virginmedia.com/notes/airport.html

  • Disconnect Error when Digital camera is connected

    This is the third time now the Disconnect Error pops up when I connect and turn on my digital camera. After the error pop-up goes away, iPhoto asks if I want to import photos and all photos import fine.
    I looked in Console to see if there is anything and I found this:
    ** (process:5105): CRITICAL **: gaimaccount_getstate: assertion `account != NULL' failed
    2007-04-26 21:53:03.369 iPhoto[5747] * -[NSTextField setAllowsMultipleSelection:]: selector not recognized [self = 0xc1d1d30]
    It all started after I switched USB cables, both are from Sony, 1 for the digital camera and the other for the digital camcorder. I tried the digital cameras original cable but I still got the same error pop-up.
    What is causing the disconnect error when I always Eject the icon before disconnecting the USB cable?

    R.Bud.U:
    Try reformatting the card with the camera. Not just erase but a reformat. I do that after every upload. See if that will clean up that error message.
    Do you Twango?

  • No sound when dialing

    I have no sound when dialing only if i use speaker phone on...

    Thanks, I contacted them and issue is resolved now.
    I had to remove the sim card and put it back in

  • 3.1 - No audio when dialing listening w/headphones

    I have a 3GS. Both my wife and I took the 3.1 update last evening. I cannot hear audio when dialing listening with apple headphone? Music works fine with headphones.

    Still two possibilities...
    1) Agreed...not likely...your iPhone hardware has become defective at the same time as the 3.1 release
    2) Something in the 3.1 with respect to how the BT radio communicates with audio devices has changed to break the solid connection you were used to...
    If a full restore didn't work...at this point I'd go ahead and go into an Apple store...have them replace the phone...then try again to get the results you saw with 3.0.1...
    If you have the same "bug" then it's 100% the OS and if not then is was mysteriously your hardware...
    Keep me posted as I'm very curious now

  • Disconnected ipod when said DO NOT DISCONNECT, now its not working.  help?

    I was in a rush and I disconnected the ipod from the dock (which is connected to the computer via the USB cord) even though the ipod had the red circle with the line through it saying “DO NOT DISCONNECT”. When I tried to use it afterwards, the screen was frozen with the “DO NOT DISCONNECT” screen blinking. I couldn’t even turn the ipod off. The battery ran out, and the ipod did eventually shut off a few hours later. When I then plugged it in to the roadtrip in my car to try and recharge it, the black and white apple screen appeared for a few seconds, then a screen with a sad ipod face and an exclamation point appeared with www.apple.com/support/ipod underneath it.
    When I got home, I plugged the ipod into the dock again, but itunes did not recognize that the ipod was plugged it. But when it was plugged into the dock, on the ipod screen there was a picture of a battery with a lightning bolt on the left side of it and a small part of the left side of the battery was filled in black. It did not blink or anything.
    I read online a few things I could try and I did try resetting the ipod, but it didn’t work, it just showed the black and white apple, then the www.apple.com/support/ipod screen. I even tried pressing the Select and Play button, and nothing happened. I also uninstalled/reinstalled itunes, but that didn't work. and since itunes won't recognize that the ipod is plugged in, i don't know what else to do.
    My computer does not even recognize that the ipod is plugged in either since nothing shows under “My Computer” regarding the ipod.
    hopefully, someone can help. if not, what do i do? can i send it in? if so how long does that take and how much does that cost?
    i'm kicking myself now for being so stupid!
    Jen
    iPod Photo 60 GB   Windows XP  

    I had this same problem but it ended up that my computer wouldnt do anything with my ipod. Load songs or anyhitng. I had to go next door to my neighbors and use there computer. Try it on another computer and if it still deosnt work try calling apple.

Maybe you are looking for