Helix not waking properly after lid has been shut

I have a few Helix and they are all having this problem.
If you shut the lid and then open it the screen will stay black. You then have to shut the lid a second time and reopen for the screen to power on.
If you open the lid very slowly it powers on 100% of the time, when you open it quickly the screen powers on 50% of the time. When the screen doesn't turn on you can press the power button and it will turn on but it should be turning on whenever the dock is opened.
I have updated the BIOS and the Firmware each to version 1.14, and the issue persists.
Anyone else seeing this issue or know a resolution/workaround?

The issue occurs when:
You shut the lid the causing the Helix to sleep
If you reopen the lid before the red light in the ThinkPad logo (on the back of the Helix) has a chance to turn off that is when the issue occurs.
At times it takes up to approx. 8 seconds for the light to dim, if the lid is reopened during that time the screen stays black.
When this occurs, closing and reopening will get the screen to come back on, pressing the power button only works after the light on the back of the Helix has gone out.

Similar Messages

Oracle Projects not totaling properly after adjusts have been made 11i 11.5.10

Hi Guru,
The our Oracle Projects group is in the process of cleaning up CIP balances on Projects which are left after the Project has been interfaced once to Fixed Assets. We are using the ADJUST function to clear the balances and this is working well for STATE 1 and STATE 2, but it is not working very well for STATE 3 projects. We have 6 Projects in STATE 3 which when the adjust was done, the correct amount was passed to FA but the CIP/interfaced CIP totals on the Capital screen are incorrect. A method is needed to correct the Capital CIP balance.

This is a very common issue.
One way to avoid this is as follows
1) Define a new item status called "Uncosted"
2) On the Item status screen (Inventory > setup > item > status code), make Uncosted item status NON-transactable.
3) Define a process where the item status changes from Uncosted to Active only after the item cost is entered. This can be done via a manual process or by a custom program that uses Item api to change the status.
Hope this helps,
Sandeep Gandhi

Modifications to a jsp file not getting loaded after it has been served out once

Hi,
I am using Weblogic 6.1 on solaris platform.
I have created a new managed server under the default domain. A new
default web application was created with a DefaultWebApp directory which
acts as the default directory for JSP files for this server.
problem 1:
In this new server if i make changes to a jsp file which has been served out
once, the modifications are not reflected until and unless i restart the
server.
problem 2:
If I start the server and after that I add a JSP file to the DefaultWebApp
directory, if I try to access it it gives a 404 error which is file not
found.
These problems do not occur in the original server which got created when i
did the installation.
Can someone help me out please.
Pankaj

Hi.
On reflection I believe this is normal behavior for WLS 6.x. In order to see
changes to jsps (or other elements in the webapp) you need to either
undeploy/redeploy the webapp via the console or the command line utility, or you
can use the refresh utility if your webapp is deployed in the exploded directory
format (ie not a war file).
For docs on redeploying and refreshing from the command line see:
http://e-docs.bea.com/wls/docs61/webapp/deployment.html
Regards,
Michael
Pankaj Bansal wrote:
yes we installed SP2 for weblogic 6.1....
the OS is Solaris ver 2.8
any suggestions on what can i do apart from opening a case with support?
Pankaj
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
Are you running with service pack 2? If not please try this. If youstill see
this with sp2 then please open a case with support.
Thanks,
Michael
Pankaj Bansal wrote:
Hi,
I am using Weblogic 6.1 on solaris platform.
I have created a new managed server under the default domain. A new
default web application was created with a DefaultWebApp directory which
acts as the default directory for JSP files for this server.
problem 1:
In this new server if i make changes to a jsp file which has been served
out
once, the modifications are not reflected until and unless i restart the
server.
problem 2:
If I start the server and after that I add a JSP file to theDefaultWebApp
directory, if I try to access it it gives a 404 error which is file not
found.
These problems do not occur in the original server which got createdwhen i
did the installation.
Can someone help me out please.
Pankaj--
Michael Young
Developer Relations Engineer
BEA Support
Michael Young
Developer Relations Engineer
BEA Support

Downpayment is not clearing even after invoice has been fully paid

Good day to everyone,
I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
The order related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!

hi
if you are doing vendor manual payment program then you clear down payment as below.
T-Code-F-44 Clear down payment
Select special gl indicator
then press enter and clear down payment against invoice.

P7 1054 on Win7 64 bit not waking properly after sleep

We're experiencing a failure to wake after sleep, where the happy blue power light comes on, everything spins up...and totally fails to do anything. Powering off and on does not fix it...it requires unplugging the cord, holding the power button to drain residual power, reconnecting, and THEN it boots up.
I've updated the BIOS, disabled any hibernate, checked the BIOS to ensure none of its power settings are taking effect, and tried a number of sleep patterns and options.
Any other ideas or similar experiences with the P7-1000 line? I'm frustrated since, for some reason, it's showing the warranty as having expired much sooner than the actual purchase timeframe.

I own a p7-1026 which is, for the most part, the same computer. Everything is the same except I have a Phenom II X4 840T CPU vs. your Athlon II X4 645 CPU and yours has a 802.11 wireless b/g/n PCIe mini-card whereas mine doesn't.
Mine goes to sleep and wakes up perfectly everytime, all the time. I did erase the HP Windows 7 install and installed a clean copy of Windows 7 but I don't think that has a major impact on your issue.
Did you install any update before this issue arose??? Did you change any settings before this issue occured??? If you have any Windows restore points, you may try rolling the computer back to one of those dates to see if that helps. You may wish to view your Windows logs for a driver or process that is causing the problem. If you don't mind backing-up your data and preforming a HP Recovery... that should cure your problem.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Airport takes forever to find my router only after lid has been closed

My macbook only started having this problem about a month ago. Whenever I close the laptop and it goes to sleep, then open it, it takes a few minutes for it to go from "Searching" to "Scanning" to actually choosing my network, and even then it doesn't always go to my preferred network automatically. It didn't used to do this and it seems to only happen when I close the laptop. When I leave the computer to go to sleep on its own without closing it, then hit a button to wake it again, the wifi network is still connected.
This problem is really only annoying because of the time it takes to find my network. But I'm also curious because it never used to do this and I'm not sure why it's doing it only on my computer. My girlfriend's older iBook G4 finds a network in about 1 second.
does anyone know why this might be happening and what I could do to fix it?
Thanks.

Try this:
1) Go to /Library/Preferences/SystemConfiguration and delete com.apple.airport.preferences.plist. You will need admin privileges to do this.
2) Start System Preferences/Network > Airport
- Click on Advanced, and AirPort tab
- Remove ALL the names in the Preferred Networks list (even the one for the network you use)
- Click on OK
- Now add the network you usually use by clicking on + and (re) entering its details (including password).
- Click on OK and exit System Preferences
Good luck
Bob

MacBook Pro with Lion not waking up after lid close

That's it. When I go to open the top, most of the time black screen. I can fake it to awaken by closing the lid and then opening suddenly. The screen lights up for about 1-2 seconds, then goes black again.

Me too. (Open lid and see displays. 2 seconds later all is dark. Try again same result.) What was your solution?

PSV2 - Not cancelling Attendance after Booking has been cancelled PD - PT

Hi,
I hope that you can assist me. We have got Integratino turned on between PD & PT and the attendance codes for going on a course are set up in SEMIN APART.
If you book a person the code is created correctly in the Time module, but if you cancel the booking the attendance isn't cancelled in Time. Can anyone assist me with this?
Regards,
Francois

Hi,
I hope someone can help,
It seems that a Full load only brings in records with a status of 30
A delta load, however brings in status 60 records with a negative quantity.
This leads to inconsistent data.
So for example, if there are 2 records in CATSDB for a person for a date, one has status 30, and a quantity of 8
and there is another record with status 60 and quantity of 8
If I do a full load, i get a quantity of 8 (the status 30 records)
However, if there was one record already in BW for that person and for that date and a delta is loaded containing the same employee, i get a reversed quantity (-8) so the total in BW is now 0.
Is this correct?
It seems a full load, which gives a quantity of 8 is correct or is the total of 0 correct?

Not able to power up computer after it has been shut down overnight

I just bought a new Compac Persario desktop . I have it plugged into a surge protector and at night I do shut it down. Last night, I shut it down like normal, and when I got up this morning, it won't turn on. The power switch on the computer does nothing. Nothing lights up and there is no sound from the cooling fan in the back. Everything else plugged into the surge protector works, including the speakers and the monitor. If I unplug the power cord and plug it back in and press the power button it turns immediately. Could I have a bad power cord? I have had several HP computers and never had this problem.
This question was solved.
View Solution.

Hi Silverbell, I'm glad it's solved, you are allways welcome back for any further questions, Adi.
I'm an HP Employee
-Please mark Accept As Solution if it solves your problem
-Please click the Kudos Thumbs up if you would like to say thanks

Dual boot computer restarts by itself shortly after it has been shut down or put into sleep mode

Hello,
I have Toshiba Equium L40-14I (old) and dual boot Vista and Linux.
A few days ago I noticed that while in a Linux operating system and when I put it to sleep (suspend) it would do so, but then immediately come alive again. The same thing happens with the shut down option. In Windows Vista it is the same. It does shut down, but in a few seconds restarts again and shows the normal options of choosing which operating system I want to boot. The computer only stays shut if I pull the power cord (it has no functioning battery) or it I forcefully shut it by pressing the power button for a few seconds.
So far I tried this:
- BIOS: 1. Changed to default factory settings. 2. Disabled wake-up on LAN and disabled wake up on keyboard.
- Device Manager, Network adapters, NIC, Properties, Power management: unticked the option that allows the adapter to wake the computer
- Device Manager: all drivers seem to be ok
- Virus scan: although this is probably not the issue as it happens independently of which operating system I am using. I have not installed any strange programs.
- I started from the Safe mode and then shut down. Same thing happened: it restarted automatically after a few seconds.
- Disabled automatic restart on system failure. It didn't help.
English is not my first language, sorry for the perhaps unclear way of describing this issue. I would appreciate any help. Thank you.

You have done just about everything I can think of. You didn't mention doing a System Restore. If you haven't done one or even if you have, do a System Restore back to at least sometime before this started happening. If the first one doesn't work, try a different restore point and do it again. If that doesn't work, you need to consider a full HDD recovery to out-of-box condition which procedure is fully covered in your User's Guide. I'm sorry I don't have a link for it but yours is not a U.S. machine and this site is for U.S. machines. It appears to be a U.K. model with support covered by THIS site.
BTW, I wish the native Americans who post on here did as well as you have so you have to make no excuses for your English.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it. I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything.
When you say you can't reach OWA is that internally or externally? As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
with Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
Server. )
Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
https://mail.theirdomainhere.tld
Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server.

Mosue dosent work after pc has been shut down .

i just got a msi k8n neo2 platinum . with a amd 64 3000+ processor , using a fx5900 gfcard , 2*512 pci 3200 400 . it worked mega , it was easy to install and get running (i got told) . and it playes my GTR racing game better that i expected . i am not really any good with pcs at all , and had a friend to put it all together and install things on it . it all worked fine for a few days , after a late night playing the gtr game my pc would not find my mouse .tryed to reinstall mouse drivers , but it doesent work , not even in device manager there isnt any symbols of a mouse . furthermore the cable modem didnt work after that episode . both running on usb . i got it working with deleting usb in device and it resinstalled itself and i thought i was a bit of a genious , but next day the same problem occured , so after i did the same device manager trick , it finally worked again . i know for sure it wont work when i turn it on tomorrow , what could it be ... end option for now leave it running 24/7 ....
by the way it is the same modem/mouse thats running now .. tryed latest drivers and so on but no way it will work after shut down !
kind reguards
Den the Dane

its still bad .... could it be a faulty motherboard ?
getting kindda with this pc behaviour

My computer does not eject the disc after it has been burned.

I understand that my computer is supposed to automatically eject a disc after it has been burned. Mine doesn't. Instead, I hear a "Plonk," which I assume is announcing that the burning process has been completed.
First of all, is it true that the disc is supposed to be ejected after the burn has been completed? Secondly, how can I restore that function?

Diane Wordsmith wrote:
To clarify...are you importing songs from a CD into iTunes, or are you burning songs from iTunes onto a blank CD? If it's the former, iTunes won't eject it...you'll just hear a chime or noise when it's done. If it's the latter it should eject.
For the second poster, it sounds you are importing. In which case, you will just hear the sound when importing is finished and you eject the CD yourself.
Just to make sure that I understand you correctly, here's what I did: Imported songs from website. They were in RealPlayer format. I then converted the song files into MP3 format, and put them into my iTunes music library. Finally, I put the songs in a New Smart Playlist, and burned them into a blank disc.
Given this situation, should I expect the disc to automatically eject when the burning is competed? If so, what do I have to do to get it to work properly?

TS1702 I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

Not waking up after sleep when i close the lid of my mac book pro.

Not waking up after sleep when i close the lid of my mac book pro.

Starwin,
Try an SMC reset:
http://support.apple.com/kb/HT3964
Follow the directions that apply to you battery you should not remove yourself, or battery you can remove.
Best

Helix not waking properly after lid has been shut

Similar Messages

Maybe you are looking for