Modifications to a jsp file not getting loaded after it has been served out once

Hi,
I am using Weblogic 6.1 on solaris platform.
I have created a new managed server under the default domain. A new
default web application was created with a DefaultWebApp directory which
acts as the default directory for JSP files for this server.
problem 1:
In this new server if i make changes to a jsp file which has been served out
once, the modifications are not reflected until and unless i restart the
server.
problem 2:
If I start the server and after that I add a JSP file to the DefaultWebApp
directory, if I try to access it it gives a 404 error which is file not
found.
These problems do not occur in the original server which got created when i
did the installation.
Can someone help me out please.
Pankaj

Hi.
On reflection I believe this is normal behavior for WLS 6.x. In order to see
changes to jsps (or other elements in the webapp) you need to either
undeploy/redeploy the webapp via the console or the command line utility, or you
can use the refresh utility if your webapp is deployed in the exploded directory
format (ie not a war file).
For docs on redeploying and refreshing from the command line see:
http://e-docs.bea.com/wls/docs61/webapp/deployment.html
Regards,
Michael
Pankaj Bansal wrote:
yes we installed SP2 for weblogic 6.1....
the OS is Solaris ver 2.8
any suggestions on what can i do apart from opening a case with support?
Pankaj
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
Are you running with service pack 2? If not please try this. If youstill see
this with sp2 then please open a case with support.
Thanks,
Michael
Pankaj Bansal wrote:
Hi,
I am using Weblogic 6.1 on solaris platform.
I have created a new managed server under the default domain. A new
default web application was created with a DefaultWebApp directory which
acts as the default directory for JSP files for this server.
problem 1:
In this new server if i make changes to a jsp file which has been served
out
once, the modifications are not reflected until and unless i restart the
server.
problem 2:
If I start the server and after that I add a JSP file to theDefaultWebApp
directory, if I try to access it it gives a 404 error which is file not
found.
These problems do not occur in the original server which got createdwhen i
did the installation.
Can someone help me out please.
Pankaj--
Michael Young
Developer Relations Engineer
BEA Support
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

Tab delimited file not getting loaded properly in OWB

Hi,
I have create a flat file module and liked it to an external table in OWB, but out of 5000 records only 3000 are getting loaded into external table for tab delimited flat file.
Could any body has any idea how this is happening.
Thanks
Ram

Hi Ram
Best thing to do is to configure the external table to have a log file name, bad file name etc.. and see the errors reported when you query the external table. This will help you identify the records in issue. If you reconfigure external table, redeploy the external table and then query the external table....read the log files etc. to see what is up, may be a data conversion issue in some records, or something completely different.
Cheers
David

When I send a text message I do not get any confirmathat it has been delivered. Is there a way of getting an automated confiramtion of deleivery as I'm used to having this on a previous phone, and need to know that my texts have been delivered.

When I send a text message I do not get any confirmation that it has been delivered. Is there any way of getting an automated message confirmation delivery and time? I was used to this with my old phone and need to know that my text message has been delivered to the recipient's phone, and when.

Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.

Downpayment is not clearing even after invoice has been fully paid

Good day to everyone,
I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
The order related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!

hi
if you are doing vendor manual payment program then you clear down payment as below.
T-Code-F-44 Clear down payment
Select special gl indicator
then press enter and clear down payment against invoice.

Xml file not getting loaded locally...

Hi,
I have created a project and it uses an xml file which I have used in assets folder within the src of the project(The project was created in D:\C Drive\Documents\SAP UX\go_green\wasl_DB\bin-debug). The url path which I have used in HTTPService is :
<mx:HTTPService id="srv" url="assets/datafile.xml" result="srvResultHandler(event)" fault="srvFaultHandler(event)"/>
This works fine when I run it through flex, i.e, it gets into srvResultHandler result function. But when I moved the bin-debug folder to some other drive and to some other folder, and when i tried opening the swf file, it fails. It is getting into srvFaultHandler fault function, where I have given a alert message, "Error reading xml file.".
Can someone please let me know where am I going wrong??? I don't want to run this in any server, I want this to run in 3 desktops locally always.......
Please help,....
-Deepak

add a compiler argument -use-network=false in your project compiler setting:
- right click on project ( it must be open ), go to properties
- go to Flex Compiler section.
- add the above argument in Additional Compiler Arguments box ( you may have -locale en_US already there, put a space after it and paste above one.)
hope it helps.

PSV2 - Not cancelling Attendance after Booking has been cancelled PD - PT

Hi,
I hope that you can assist me. We have got Integratino turned on between PD & PT and the attendance codes for going on a course are set up in SEMIN APART.
If you book a person the code is created correctly in the Time module, but if you cancel the booking the attendance isn't cancelled in Time. Can anyone assist me with this?
Regards,
Francois

Hi,
I hope someone can help,
It seems that a Full load only brings in records with a status of 30
A delta load, however brings in status 60 records with a negative quantity.
This leads to inconsistent data.
So for example, if there are 2 records in CATSDB for a person for a date, one has status 30, and a quantity of 8
and there is another record with status 60 and quantity of 8
If I do a full load, i get a quantity of 8 (the status 30 records)
However, if there was one record already in BW for that person and for that date and a delta is loaded containing the same employee, i get a reversed quantity (-8) so the total in BW is now 0.
Is this correct?
It seems a full load, which gives a quantity of 8 is correct or is the total of 0 correct?

Helix not waking properly after lid has been shut

I have a few Helix and they are all having this problem.
If you shut the lid and then open it the screen will stay black. You then have to shut the lid a second time and reopen for the screen to power on.
If you open the lid very slowly it powers on 100% of the time, when you open it quickly the screen powers on 50% of the time. When the screen doesn't turn on you can press the power button and it will turn on but it should be turning on whenever the dock is opened.
I have updated the BIOS and the Firmware each to version 1.14, and the issue persists.
Anyone else seeing this issue or know a resolution/workaround?

The issue occurs when:
You shut the lid the causing the Helix to sleep
If you reopen the lid before the red light in the ThinkPad logo (on the back of the Helix) has a chance to turn off that is when the issue occurs.
At times it takes up to approx. 8 seconds for the light to dim, if the lid is reopened during that time the screen stays black.
When this occurs, closing and reopening will get the screen to come back on, pressing the power button only works after the light on the back of the Helix has gone out.

Images not getting Loaded while running Java Application through jar file

Hello Friends,
I have a problem while starting my application.I have written my application using pure java.There is no JSP or anything just pure swings.Mine is a standalone appplication.So i used to run it using a batch file.And when i used to start my application it used to not show me the images.so what i did was i mentioned the starting directory in the properties of the batch file (ie in the start in column field).But that was when i was using weblogic server.And i have lot of people working on the same application.so i used ZAC publisher in weblogic and along with that i used to publish the batch file also.so the users dint have any problem.But now what is my problem is i m trying to use JAVA Webstart instead of weblogic ZAC.Now in webstart what happens is that i have to run the appliaction thru jar file.so where do i mention the class path so that the images get loaded.As of now the imaes are not getting loaded.i feel this is a class path problem.but where do i mention it that is my problem.It would be really helpfule if someone could help me out.
thanx and regards,
[email protected]

try out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file

Monthly sales forecast file upload new combinations not getting loaded.

For one of our planning areas, I get sales forecast as spread sheet and upload this to the infocube.
We run CIF daily and monthly also to include all new material.
When I upload the file when I checked the log everything went fine with 3 warnings for 3 products with message "contents of the infocube not contained in BasicPlobStruc.
Now these material are already in APO by Sold to party is new and there is no combination to this Sold to party and hence the the data did not get loaded.
Now my Client wants to change whatever required so that all new combinations data are included in when month end sales forecast is loaded.
Can you advice what needs to be done as ther are large number of products I wont which are new combinations and as far as my knowledge is concerned , since there is no history CVC's are not automatically created.
Can anyone advice.

Hi Siva,
To b frank I did not completely understand what you are talking about as you are all over.
As I understand you are getting excel file for sales forecast and you upload the flat file to cube and generate CVCs based on this cube. You are not able to generate the CVCs for all combinations in the cube.
"Sold to party is new"-- where is this new? in the cube data?
"contents of the infocube not contained in BasicPlobStruc." - You get this warning if you have lets say 4 characteristics in your cube and only 3 of them in the planning object structure. This is ok. The rule of thumb is that "Your planning object structure has to be subset of your infocube". Which means that you cannot have 3 characteristics in cube and have all those 3 +1 additional in POS.
This still does not stop the system from creating all combinations int he cube as CVCs.
The possible reasons why the combinations(CVCs) are not generated from cube:
1. If there are empty values in a record like below
Plant--Materialsales org.-customer---qty.
P1--M1SO1____----10
P2--M2SO2C2--
17
The system only creates the combination P2M2SO2C2 but leaves out the first combination..Why? you have an empty value and system cannot take it so it leaves it out.
2. If you are checking the flag "Check SCM master data" in MC62 while CVC creation. The system checks the master data for products, locations and if the product or location does not exist the system doesnot create the corresponding combination.
Please correct me if I misunderstood you and also do not hesitate to ask more questions for clarity.

The custm error page is not getting loaded in TomCat 5.0

Hi all,
I am working on a JSF web application deployed in Tomcat 5.0.I was trying to redirect 404 and 500 error pages to custom error pages.But the error pages are not getting loaded and i am getting normal Tocat 404 status page.
I am giving the web.xml entry for the error page defenition.
<error-page>
          <error-code>404</error-code>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
     <error-page>
          <error-code>500</error-code>
          <location>/faces/SessionExpirepage.jsp</location>
     </error-page>
     <error-page>
          <exception-type>java.lang.Throwable</exception-type>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
Please help me out to solve this problem.Its urgent.I will be greatful for any kind of help.
Note: The same application working fine,ie,the error page is getting loaded while deploying WAS 6.0.
Jeevan Edakkunnath.

That's a specification version. I was asking for the implementation and version. Is it the Sun reference implementation (Sun JSF RI)? If so, which build?
It works flawlessly here on the latest build of Sun JSF RI 1.1, the 1.1_02. You can get the latest build at [http://javaserverfaces.dev.java.net]. I was using Tomcat 6.0.14 by the way, it might make difference.
Does it work if you use plain vanilla JSP files and do not pass the request through the FacesServlet? I recall some bugs related to it, but I am not sure anymore if it is related to the JSF implementation or application server used.

JSP is not getting displayed.

Hi experts,
I am developing and application , in which the user select a entry from select box and clicks on the button. This should open the 2nd JSP but surprisingly it is not doing that. It just the let 1st JSP on and blinks.
The switching between JSPs is done using a state variable, whose value changes in the method used for OnClick of button.
Can you please tell me why 2nd JSP is not getting called? I am very new to Portal development.
Regards,

Hi,
Did u write a method for onClick event in component(java file).if u write it in java file & set "state=1" so when u click a button it will call seconn jap file...
Regards,
Senthil K.

JSP is not getting displayed in add portlet repositery

Hi,
I have registered two servlet in provider.xml and I was able to
view that servlet as a portlet in add portlet repositery.
After that I wanted to add one more JSP as portlet under same
provider. So I have kept JSP in same directory where servlet is
kept. I have added JSP as portlet in Provider(i.e. provider.xml)
and given appPath and appRoot for that JSP. Whenever I am trying
to view my provider by giving following URL
http://servername/servlet/myprovider
I am getting message -
Congratulations! You have successfully reached your Provider's
Test Page.
in same page I am able to view my all portlets. in that list I
am able to view my JSP as a portlet.
Now I want to add JSP portlet in my page at that time that JSP
portlet is not getting displayed in add portlet repositery.
Can anybody tell why JSP is not getting displayed in portlet
repositery ? What should I do to get it displayed in portlet
repositery ?
Thanks in advance.
Biren

You have to refresh the Provider. They are a couple of ways to
do it.
1. Take a look at the release notes for PDK-Java.
http://portalstudio.oracle.com/servlet/page?_pageid=468&_dad=ops&
_schema=OPSTUDIO
It mentions and auto reload feature that will refresh the
provider on the PDK-Java side when you make changes to the
provider.xml. When you add portlet, you simply refresh the
repository in portal and add the new portlet to a page.
2. If you do not have the auto_reload parameter, you simply need
to refresh manually.
a. After updating the provider.xml, restart the HttpServer where
your PDK-Java Provider is located.
b. Refresh the Portlet Repository
Both these do the same thing, and should solve your problem
Sue

Data is not getting loaded in the Cube

Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
Thanks

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

I am using Iphone 4s. In App Store Update, this page is not getting loaded in my iphone. Blank screen is showing up, rest all pages are getting open. Please tell me the problem and solutions.

Hi,
My Name is Pranav.
I am using i phone 4-s.
In my iphone when i go to app store > Updates, system showing me 10 updates but when i try to open this page, page is not getting open. Loader came up and then white blank screen is visible. Rest all Featured, Top Charts Genius and Search are working fine but updates page is not getting open.
Guys please help me out to sort this problem.
Thanks,
Pranav
[email protected]
+91-8460366331

Looks O.K. to me Opens correctly in Firefox and Opera as a log-in page for Killer Content - Win7x64 Fx5.
I can't see any oddities in your plug-ins. It never hurts to clear any relevant cookies and your cache.
You could see how it goes in Safe Mode - Hold Shift key down as you double click on the Firefox icon>ignore the page that opens and continue. If the page opens you probably have a problem with extensions or themes and you should work through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
A lot of things have been updated as well as Firefox and you could have a culprit or conflict. Next, if there is no improvement you could try disabling third party toolbars, and you should report back at this stage or if there has been early success.
Someone may come by with a more specific remedy.

File not getting deleted using File.delete()

Hi guys,
I have a code like this:
File tempdir = new File("tempdir");
tempdir.mkdir();
File temporaryFile = new File("tempdir\tempfile.txt");
FileWriter writer = new FileWriter(temporaryFile);
// write data into file
writer.flush();
writer.close();
try {
// Do something
catch (Exception e) {
// Do something
temporaryFile.delete();
tempdir.delete();The program runs successfully. The directory and the file is created and data is written successfully into it. However, the file as well as directory is not getting deleted at the end of the program. I tried temporaryFile.deleteOnExit(), but this also didn't help.
Can anyone provide some input as to what can be the possible reasons for the file not getting deleted?
Thanks..

I want the file to be created inside the directory I specified. Hence, I put the "\". Please let me know if there is some other way to achieve this. This way I am getting the file created at the location I want.
One more interesting thing which I noticed. Actually this code is part of a JUnit test. In the same JUnit, I am creating new files in atleast 2-3 test methods. But the deletion of files is really random. Sometimes, 2 out of 3 get deleted, sometimes only 1 gets deleted. However, I didn't come through a single instance wherein all the 3 files got deleted. :-(
Also, the directory is never deleted. However, I got the reason behind this. As per the File API, the directory will not be deleted if it is not empty.

Modifications to a jsp file not getting loaded after it has been served out once

Similar Messages

Maybe you are looking for