Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!
Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
I would guess your iphone has been hacked ( jailbroken ) ring any bells ?
Similar Messages
-
Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you
Where did you purchase the phone? Then, you can use this support document to find out how to contact Apple Support from your location. Contact Apple for support and service - Apple Support
-
Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution
Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
http://www.apple.com/batteries/iphone.html -
My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.
Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!! -
HT4009 In-App purchase is turned on and still unable to purchase it. Need help for that! Thanks!!
I turned on my In-App purchase under "setting- general" but still unable to complete the purchase. Need Help!! Thanks!!!!
If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
hello can someone help me out
i have a iphone 5 and i set a password this morning
however i have forgotten it
and with the ios7.0.3 you cant just reset your phone
and the app find my iphone is turned on
however my problem is i cant turn it of cause ive forgotten my password
please can someone help me
Thankyou
i miss my phone haahFollow the directions here to force the phone into recovery mode & restore it:
http://support.apple.com/kb/HT1808
This will remove the passcode. -
Hello I have a problem with my IPhone 5S not turning on
So I had my phone in my pocket this morning at a ball game, and it was fully charged. I took it out and took two pictures, and held it in my hand and I went take another picture and it was off. I have only had this phone since April so its still pretty new. I just can't figure out what heppened to it.
Reset the phone, as clearly outlined in the user guide: hold the on/off switch and the home button simultaneously up to a minute -- release when you see the Apple logo.
-
Hello, I have such problem. My TouchSmart IQ500 when turned on shows only startup screen.
When I turn on the TouchSmart IQ500, it shows only startup screen.
Pressing F11 (System recovery) does not affect anything.
Pressing F10 - it writes entering setup... and nothing more happens
Pressing F9 - also no response.
Please tell me what can be done?mantasystems wrote:
When I turn on the TouchSmart IQ500, it shows only startup screen.
Pressing F11 (System recovery) does not affect anything.
Pressing F10 - it writes entering setup... and nothing more happens
Pressing F9 - also no response.
Please tell me what can be done?
It sounds a LOT like a dead hard drive, running diagnostics would be a good place to start. -
Hello , I have a problem with a GIgE AVT camera.
All I want to do is make the camera wait and each time there is a TTL signal snap a picture and save it to the disk.
I have spent hours and hours trying to make this work but I had no luck !
Could someone with knowledge of the IMAQdx drivers help me please !?
I really can't find a solution to this problem!Hello LaThoS,
thanks for your reply .
What i am trying to do is use an AVT GS660 which actually has a hardware trigger input and all i am trying to do is put it in a while loop and make it wait untill there is an external ttl signal, then take a picture , save it and then wait for another ttl signal !
I 've seen the examples but i cannot see how they are going to be usefull to me since there is no hardaware ttl signal on the cam( https://decibel.ni.com/content/docs/DOC-15346)
I am attaching my sample code.
Could you please help me figure it out ?
Thanks in advance,
yannis.
ps:the problems that i am facing is that on ttl the camera starts saving the same image continisously till i stop the loop !
Attachments:
AVT_v5_NI.vi 75 KB
enum.ctl 4 KB -
Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hello, I have a problem with the iphone 4s
Hello, I have a problem with the iphone 4s, here is the issue: I wanted to call, there was no beeps, then I've got the call, and everything was allright, I turned off the iphone, then I failed to restore it with 1611 error,I tried it on several computers with the same error 1611. What should I do, I live in Russia, but bought iPhone in the USA, can I send mail to the USA for warranty service, or to Europe, and how to do it? Please help, Iphone worked for a month and then broke, I treated it very carefully.
Your security software (firewall, anti-virus) may be interferring with your attempt to restore. Disable them during the restore.
See here: http://support.apple.com/kb/TS3694#error1611 -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Hello,
I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
thanking you in advance for your kind help.Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.
-
Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
Help?Did you check your security software settings?
Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software. -
please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015
Stop being impatient.
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You cannot downgrade.
If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.
Maybe you are looking for
-
Macbook Pro Retina Mountain lion freezes after deep sleep
Hello All, I am having a strange problem with my MacBook Pro Retina, Mid 2012 (Mountain Lion 10.8.3). Since about January time It keeps crashing after I put it into a deep sleep. After closing the lid - waiting for 1 hour or so - then reopening the l
-
Is there anything we need to look out for when running Forte 3.0.N.1 and iDS5.0 SP1 on WindowsXP?
We are in the process of migrating to Windows XP and during the transition period from 95 to XP we will need to run the uncertified for XP products Forte 3.0.N.1 client runtime and the iDS5.0 SP1 admin console on XP for a time. We were just wondering
-
Kerberos problem (cannot resolve hostname)
We are now trying to setup Xserve G5 cluster computer system (1 head node and 6 cluster node) with OS X 10.4.3, and having trouble with Kerberos. Head node has two network addresses: one is static IP address of our university (en0), and the other is
-
Hi all, I've an requirement to check the valuation type when creating a batch with MSC1N. I've tried using various user exits, especially EXIT_SAPLV01Z_004, ZXVBZU04. It is not called in MSC1N. What's wrong is there? (Another exit EXIT_SAPLV01Z_006 i
-
Has anyone used the reel projection plugin for jQuery?
Hello to all, im new at all this website stuff. im creating an online protfolio and want to have a place were each of my characters can be rotated 360. Im using a tutorial i found on the reel plugin. but its not working for me. i have included all th