Help accessing an extranet?

I've been given some login details for an extranet yet I get this error when going to the url:
https://www.xxxxxxx/website/Amber.nsf
Safari can’t open the page “https://www.xxxxxxx/website/Amber.nsf”. The error is: “The server “www.xxxxxx” did not accept the certificate.”
(NSURLErrorDomain:-1205) Please choose Safari > Report Bugs to Apple, note the error number, and describe what you did before you saw this message.
I can access the site using Chrome and Firefox, can anybody help me to get Safari working?

This will get you a handle on the two Xml nodes with that
address-id: <cfset results = XmlSearch(myXml,
'//:result[@address-id="739030698069958"]') />

Similar Messages

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Hard drive recently failed and iPhoto brings a -36 error when copying need help accessing image files

I recently updated my computer to mountain lion and after doing so my computer would no longer boot up. I took it to the apple store and they told me that the hard drive was damaged and needed to be replaced. They were booting my computer with an external drive and in doing so could access my computers HDD. Upon starting to drag and drop files to a new hard drive I started to get a lot of -36 errors. I proceeded to go go,e and create my own bootable thumb drive and try doing the same process with more time to look through it. I have up till now been able to copy most of my files but have run into a problem with iPhoto.
I have been searching around for a while now and have yet to find a method that helps me in my particular situation so I am now asking for help myself. I will explain what my current system of file recovery is and see if anyone can help me out.
I have since then replaced the HDD in my computer and purchased a SATA external HDD enclosure for the original drive. This allows me to still access all files and folders from the original drive. I have managed to recover a majority of the files but have recently run into a problem with the iPhoto library. Every time I try to drag and drop the iPhoto library to my new HDD it fails after "transferring" 2.02GB and tells me it has encountered a -36 error because some files cannot be read or written. I believe I am using iPhoto '09, I will check and confirm that later.
I am looking for a way to open iPhoto's library and access the image files it seems to be hiding from me. Please understand that I cannot open the iPhoto library either, I have lost access to the library entirely and want to see if there are any image files that I can save. I dont have the computer backed up recently and want to save my photos. Thanks for looking and I'm hoping someone can help.

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command). Rebuild it to the Pictures Folder. This might overcome the -36 issue.
(This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.)
Failing that you're into recovering your Originals from the damaged Library and creating a new Library and starting over from scratch.
Regards
TD

[Help Accessing External usb 1TB HD from windows 7 on Imac with Lion]

Hello to everyone, i would like some help and im not finding any solution on how to solve the problem. I upgraded from snow leopard to Lion, where i could share without any problem every file on mac hd or the external hd, no problems at all. Now using osx lion and its such a headache to share anything, i created a "sharing only" account and added it on the "file sharing" after enable "Share files and folders using SMB".
Now the problem is, i went to the "+" add button on the "Shared Folders" and added all folders there that i would like to use from my windows 7 PC, i can access everything that is on the macintosh HD, but i cant access anything that is on my external HD. I dont know if this information is relevant but im using paragon ntfs 9.0.5 to manage the use of the external ntfs HD. I tried "Apply permissions to enclosed items" on every user listed for the folders i want to access, but it didnt help either.
Thanks in advance.

Holding alt key does bring up the choices, but I never see the bootable USB or external DVD drive as options... I only see the 2 partitions - the main iMac and the partition created by Bootcamp to install windows.

Help accessing methods in classes load with forName()

Hi all,
I am dynamically loading classes at runtime by using Class.forName() and .newInstance(). Is there any way I can access the methods of those classes after they are dynamically loaded? It doesnt seem that they are available for use.
Any help would be appreciated.
Ryan

To clarify, are you asking how to invoke a method on an Object without knowing its class? In any case you should use the reflection api that are avaliable.
Ex: cl = Class.forName(); Method[] methods = cl.getMethods(); for(int i = methods.length; i-- > 0;) System.out.println(methods[i-1].getName());
or
methods[i-1].invoke(cl.newInstance(), new Object[]{});

Time Capsule: Need help accessing my video surveillance DVR from the Internet.

I am using the latest 4th Generation Time Capsule attached to a DSL Modem. My 4 video Survilance DVR is connected to a switch then to the Time Capsule. How or what is needed to be able to access the DVR via the internet. I am able to access the DVR from within the home network only. Would appreciate some guidance.
Thanks in advance.

Is the modem bridged?
If not and working in router mode then the TC should be bridged.. this will never work if you have double NAT.
Whichever box is the main router will need to forward the required ports for the camera dvr.. does the software use port 80 ie html?? That means you just forward port 80 to the IP address of the dvr. But find out the port.. the dvr instructions should tell you. Port forwarding on the TC.. ain't hard.. just google for the instructions. If the dsl modem is router, read its manual.
You will need to lock the ip of the dvr so it doesn't shift. Do that in the router if possible but I am not sure you can on the TC. You will need to do it on the device using a static ip.
The other thing is public IP .. do you have a static public address.. if not you will need to run dyndns. this is not available in the TC.. as most things are not available. So you will also need to check the dvr remote access instructions as it might have a dyndns client.. or you will have to use dsl modem as router even if you currently bridge it.
Sorry this is making it complicated.
Give some feedback and we can go from there.
What is the main router?
What modem is it exactly?
What make and model is the DVR? A URL to the pdf manual will help if it gets complicated.
What port do you use to access the DVR?
Is there a dyndns client in the dvr?

Need help accessing itunes files on a share

My roommate was running out of space on her macbook, so I created a share on my iMac which has 1TB of space.
We moved all of her music from her computer to the shared space on my computer
I redirected iTunes on her computer to make the share on my computer the default path to play music from
I opened finder on her computer and dragged all the music into iTunes. Everything worked fine. It was playing the music files from my computer on her iMac.
On her macbook, I unmounted the connection to her share on my iMac and reconnected. She can still read and write to the Itunes folder on my iMac, but now when we try to launch iTunes, a message comes up saying "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." So now I can't even run iTunes because it automatically closes after this message comes up.
This doesn't make sense because a) she does have write read/write permissions b) the songs worked just fine until i unmounted/remounted and c) even though Itunes says we don't have access, we do because we can still navigate to the music files on the share from her macbook.
Help! Thanks in advance.

Update:
I removed the "iTunes Library" file from Home>>Music>>iTunes, which allowed me to get back into iTunes, but I don't know how to connect to the files without it locking up again in the event that the mount to her share on my iMac becomes unmounted again.

Need help accessing Mail files after Updgrade to OS X 10.5

I recently did an Erase and Install of my new Leopard OS X. Before doing so, I copied my complete mail file from 10.4 to an external HD.
After installing 10.5, I tried to import the old files from the HD and I get a message that says my Mail file is not compatible with this version of OS X. This is a REALLY big problem because I have 8 years worth of contacts stored in those mail files
I don't know what to do. I have since set-up new mail accounts, so I am using my Mail Program without problems. I need to know how to access my old files. I have tried everything I can think of. Any help would be appreciated.

which Mail file do you mean? the Mail application itself? that was the wrong thing to copy. the application itself contains no user data at all. all your mail data was stored inside your home directory in the folder homedirectory/Library/Mail. if you didn't back up that folder, your Mail data is gone. Your ONLY chance (and it's a small chance) of recovering your Mail data now is to use data rfecovery software like [Data Rescue II|http://www.prosofteng.com/products/data_rescue.php] or [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1] and try to restore that Mail folder. You should do this ASAP to decrease the chance that this data will be overwritten.

Need help accessing PC's

I will be starting my Graduate School soon at a Fundamentalist seminary (www.bju.edu). Internet access here seems to be ultra filtered, and ultra blocked. I have a few questions about being able to access other computers on the Intranet.
I cant seem to be able to connect to other PC's via the normal GO - Network feature in Tiger, nor via the Connect to Server option. However on my Windows 98 laptop I can browse other workgroups.
Do I need to run a trial version of Dave? When I got my undergrad I attended a moderate Evangelical college, and they also had firewalls and Internet filtering, however they only really blocked, sex, ****, games, and other such ungodly sites. There I installed Dave and then I was able to access PC's on the network. But then again I was using OS 9.x at the time.
I thought OSX had PC network share browsing built in, but perhaps I thought wrong, and I need to install Dave.
All I know is that whatever they have installed or configured (seems to use Novell BorderManager) blocks Newsgroups, FTP, SSH, Telnet, IRC, gopher, AIM, AOL, Safari, and even Classic Internet apps, not including non supported operating systems (DOS, Windows 3.11, Windows 95, Windows CE, Mac OS 7-9, Unix, Linux, etc..).
I am not a networking expert, and perhaps the people here are, I am not sure.
Oh and I forgot that the Apple Software Update app and Quicken Direct Connect (run through Quicken software) are also blocked.
Just want to be able to access PC shares without buying Dave.
I have sent a few emails to IT, and perhaps they will be able to allow me to run Apple Software Update, Quicken Direct Connect, connect to my FTP Unix server (that I use for backups) and allow me to access my FTP web server, so I can update my website (without using Yahoo's web based option). Too bad I cant update each page via Claris Home Page like I can on a open network. But since OS 9 is not supported all apps that tunnel in that environment are blocked here, so I cant just edit one of my pages and click on the update icon here.
Thanks for the help on helping me access PC shares.
John

>I cant seem to be able to connect to other PC's via the normal GO - Network feature in Tiger, nor via the Connect to Server option. However on my Windows 98 laptop I can browse other workgroups.
Autodiscovery can be hit or miss, especially when dealing with multiple workgroups/domains and with filtered networks (the chances are that since the school is filtering so much traffic, they're probably also filtering some of the auto-discovery protocols).
However, that shouldn't prevent you from conecting if you know the IP address of the server you're trying to access. You can just enter smb://ip.address.of.server/sharename/ to connect directly, without using auto-discovery to find the servers.
>Oh and I forgot that the Apple Software Update app and Quicken Direct Connect (run through Quicken software) are also blocked.
IMHO, the network admins need to get a clue. Blocking important services such as Software Update means that you can't apply security updates to your system, potentially leaving you vulnerable. I'd guess that they don't block access to the Windows Update servers (or there'd be real trouble with all those hacked Windows machines), so they shouldn't block access to the Apple update servers, either.

Freely Programmed search help - Accessing Alternative node

Hi Experts,
I am trying to use Freely Programmed search help for calling a custom WD component on pressing of F4 of an input field.
I have done everything required and the component is being called properly as well.
The issue here is that i need to pass two values to the the custom WD component on F4. As suggested in one of the threads I used F4_CONTEXT_ELEMENT to get the reference of the source context node and attributes. But the problem is that this gives reference to only that node which has the input field with F4 help (which is being used to call the custom component). The values which i need to pass are present in some other node.
Can you please suggest a way of accessing the other node to retrieve and use the values in the custom component called?
Regards,
Ritvik
Edited by: Ritvik Prasad on Mar 31, 2010 5:16 AM

Hi Manas,
Thanks for the suggestion. I had thought about it too. But the problem that i faced was that no event is triggered/Method called on pressing of F4 on that input field (its internally handled in the framework). In that case what should be the method/event where i should copy the values from the other node to the new attributes created so that it reflects in the Custom component?.
If you could just elaborate on that it would be really helpful.
Hi Chris,
Thanks a lot for this. That actually sounds like fun. I tried looking for options to do that. Although i can get to the node from the element using "GET_NODE" but there I could not find the method "GET_PARENT_ELEMENT" to get the parent element (context as you said). Is there any other method which could possibly return the parent element which i could eventually use to get to the other node.
It would be great if you could help out with this.
Thanks ,
Ritvik

Help Accessing Airport Extreme Remotely?

I have an Airport extreme base station at home and want to be able to login and admin the router from remote locations. I have logged into the router and set the checkbox for WAN access but this doesn’t seem to help.
All other routers I have owned you are able to login to them from your WAN IP address and then play with the setting s. When I launch the airport utility from outside my home it doesn’t find the base station, same with iOS app. What am I doing wrong, or is this even possible with the AE?
Cheers

Which router are you asking about?
If you have an Apple AirPort router, settings are accessed by opening the AirPort Utility application.
Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort icon, then click Edit to access the settings

Help accessing or finding images in embedded libraries

My library lives on an external drive. When the drive isn't attached iPhoto will create a new library for images I am trying to import from my camera.
Today I didn't realize my external had been disconnected, and although at the time of import the external was connect iPhoto created a new library, which ended up somehow being embedded in the original library.
I can't "show contents" of the embedded library, nor can I access it when choosing a library when opening iPhoto with the option key down. I can see the embedded library when viewing the contents of the original library package.
I tried making a copy of the embedded library to a more top level directory.. I can see it when opening iPhoto, but it's not recognized as a library. I know there are photos in it, it's 34.8 MB.
How do I get to the photos in there so I can export them and properly import them into the original library?
Any help would be greatly appreciated. I chose to "delete original" from my camera before realizing where I had just imported all my photos.
I'm using iPhoto version 8.

In the Finder:
Use the Go Menu and select 'Go To Folder'
In the resulting window type
/Volumes
And hit return. A Finder window will open at that location. Can you see another iPhoto Library there? If so, drag it to the desktop
Regards
TD

Help accessing Hotmail!

I have had my Blackberry now for 24 hrs and I can't get on my Hotmail account. My phone is a Blackbery Curve 8320 from T-Mobile.
I tried setting up the e-mail function with my Hotmail account, and I get this message:
"An error occurred during email account validation. Please check your information and try again. If the error persists please contact your email account provider."
So I tried logging onto my Hotmail account using the internet browser function. When attempt to log
in, I get this message:
"HTTP Error 502 Bad Gateway
The gateway recieved an invalid
response from the server when
attempting to fulfill your request.
Pleas try loading a different
page. Contact your service
provider if this problem persists."
I can log onto the Hotmail Mobile site from my laptop, but for some reason, not on my phone. If anybody can help me out with this, I would really appreciate it. I am getting a little fustrated.
EDIT TO ADD:
I read another post were you have to have an older hotmail account to be able to access it on the mobil unless youpay. My Hotmail account is actually so old that I have had my account since about 4 years before Microsoft bought out Hotmail. We are talking somewhere around 1994 to 1996 since I signed up for hotmail.
Message Edited by 03rangerxlt on 04-03-2008 02:19 PM

If I could attach screenshots, it would be easier to explain. But you may be able to try this, it might work.
1) Log into your BlackBerry Internet Service Website, which should be something similar to this (depending on your carrier):
https://bis.na.blackberry.com/html?brand=vzw
2) Once logged in you should see a button that says "Setup Email Accounts", click on it, but instead of putting in Hotmail info, put in random information here ie. [email protected] for email address. If the BIS sees Hotmail, it won't allow you to manually configure it, it will simply tell you to contact your email provider.
3) It will say its processing, then it will come back with an error, choose "I will provide the settings" click next
4) Choose "This is my personal email account"
5) Choose "I will provide the settings to add this email account"
6) Fill in your hotmail info and the mail server I provided in a previous post.
That may or may not work. Looking at my BIS, it appears as if I can no longer configure my port manually so if that process doesn't dig up and use port 995 automatically and you can't manually set it to port 995 you may be out of luck.
www.novawirelessconsulting.ca

I need help accessing my Mac email

My problem is on my iPad I have no problem using my iTunes however when I try to sign in on my iPhone it has a different email ( Mac.com) I can't reset it because I can't figure out how to access that account.

Sorry I am not sure how to word it differently. I will just wait and have my son help me with it. Please forgive this old lady.

I need help accessing the itunes store

so for some reason my itunes doesnt let me get to the itunes store. it doesnt let me sign in to my itunes account and when i go into the itunes store through the internet is says. itunes can not proccess the request ( error 11223) please help me

Go up to the top of your screen on iTunes and click on 'Store'. Then go down to 'Authorize This Computer'. That should cover part of it unless you've already authorized a bunch of other computers to use your account. If that's the case, you'll have to go to one of those computers and click the button just below it to 'deauthorize your account' from that computer. If you're not able to access the store, check your internet connection to make sure you are connected. Hope this helps.. good luck!

Help accessing an extranet?

Similar Messages

Maybe you are looking for