Need help accessing Mail files after Updgrade to OS X 10.5

I recently did an Erase and Install of my new Leopard OS X. Before doing so, I copied my complete mail file from 10.4 to an external HD.
After installing 10.5, I tried to import the old files from the HD and I get a message that says my Mail file is not compatible with this version of OS X. This is a REALLY big problem because I have 8 years worth of contacts stored in those mail files
I don't know what to do. I have since set-up new mail accounts, so I am using my Mail Program without problems. I need to know how to access my old files. I have tried everything I can think of. Any help would be appreciated.

which Mail file do you mean? the Mail application itself? that was the wrong thing to copy. the application itself contains no user data at all. all your mail data was stored inside your home directory in the folder homedirectory/Library/Mail. if you didn't back up that folder, your Mail data is gone. Your ONLY chance (and it's a small chance) of recovering your Mail data now is to use data rfecovery software like [Data Rescue II|http://www.prosofteng.com/products/data_rescue.php] or [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1] and try to restore that Mail folder. You should do this ASAP to decrease the chance that this data will be overwritten.

Similar Messages

Hard drive recently failed and iPhoto brings a -36 error when copying need help accessing image files

I recently updated my computer to mountain lion and after doing so my computer would no longer boot up. I took it to the apple store and they told me that the hard drive was damaged and needed to be replaced. They were booting my computer with an external drive and in doing so could access my computers HDD. Upon starting to drag and drop files to a new hard drive I started to get a lot of -36 errors. I proceeded to go go,e and create my own bootable thumb drive and try doing the same process with more time to look through it. I have up till now been able to copy most of my files but have run into a problem with iPhoto.
I have been searching around for a while now and have yet to find a method that helps me in my particular situation so I am now asking for help myself. I will explain what my current system of file recovery is and see if anyone can help me out.
I have since then replaced the HDD in my computer and purchased a SATA external HDD enclosure for the original drive. This allows me to still access all files and folders from the original drive. I have managed to recover a majority of the files but have recently run into a problem with the iPhoto library. Every time I try to drag and drop the iPhoto library to my new HDD it fails after "transferring" 2.02GB and tells me it has encountered a -36 error because some files cannot be read or written. I believe I am using iPhoto '09, I will check and confirm that later.
I am looking for a way to open iPhoto's library and access the image files it seems to be hiding from me. Please understand that I cannot open the iPhoto library either, I have lost access to the library entirely and want to see if there are any image files that I can save. I dont have the computer backed up recently and want to save my photos. Thanks for looking and I'm hoping someone can help.

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command). Rebuild it to the Pictures Folder. This might overcome the -36 issue.
(This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.)
Failing that you're into recovering your Originals from the damaged Library and creating a new Library and starting over from scratch.
Regards
TD

Need help accessing itunes files on a share

My roommate was running out of space on her macbook, so I created a share on my iMac which has 1TB of space.
We moved all of her music from her computer to the shared space on my computer
I redirected iTunes on her computer to make the share on my computer the default path to play music from
I opened finder on her computer and dragged all the music into iTunes. Everything worked fine. It was playing the music files from my computer on her iMac.
On her macbook, I unmounted the connection to her share on my iMac and reconnected. She can still read and write to the Itunes folder on my iMac, but now when we try to launch iTunes, a message comes up saying "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." So now I can't even run iTunes because it automatically closes after this message comes up.
This doesn't make sense because a) she does have write read/write permissions b) the songs worked just fine until i unmounted/remounted and c) even though Itunes says we don't have access, we do because we can still navigate to the music files on the share from her macbook.
Help! Thanks in advance.

Update:
I removed the "iTunes Library" file from Home>>Music>>iTunes, which allowed me to get back into iTunes, but I don't know how to connect to the files without it locking up again in the event that the mount to her share on my iMac becomes unmounted again.

Need Help-SOA 11g File Adapter unable to delete input file and its crashing

Hi All
Please find the details below:
1. We have created a simple SOA composite to Read file from an input directory, archive the file in an archive directory using Inbound File Adapter Read
and then use Outbound File Adapter Write to move the file to a output directory.
2. File Adapter needs to delete the file after successful read/retrieval.
3. We are using the "Use Trigger File" for invoking the file adapter. This is a new feature in SOA 11g
4. Also we are using the option of reading the file as an attachment as we are not doing any transformation in the composite
Issue Details_
1. When the trigger file is put in the input directory for the first time, the File Adapter reads the file, archives it and moves it to the output directory
2. However it does not delete the input file from the input directory and raises Fatal Exception mentioned below:
[*2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]*
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC PostProcessor::
Delete failed, the operation will be retried for max of [0] times
[2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC [[
BINDING.JCA-11042
File deletion failed.
File deletion failed.
File : C:\Dibya\AttachmentTest\InputDir\TestFile3.txt could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
If any one has faced similar issues, kindly provide pointers on how to resolve it.
Regards,
Dibya

Hi,
Using the file adapter, you can poll from multilple locations...
Keep the following property in your .jca file
<property name="DirectorySeparator" value="," />
While giving the path in File Adapter configuration, keep comma and give the next location....then the file will be picked up from the locations you gave....
Hope this helps...
Thanks,
N

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

Need help with backup files made by HP Recovery.

So in 2011 I had made a post about a DV9 series HP laptop I had that I felt needed a harddrive. Well the laptop has been sold to a friend of mine and he has since fixed the issue it had. My curent deboggle is trying to deal with the 36GB of data it backed up onto an external USB powered harddrive. The information was saved from a system that ran Windows VISTA, on that same DV9 Pavilion. I have a new laptop and it's a Pavilion DV6 running windows 7. Is there some sort of 3rd party application or an uncommon HP utility that can open, run or modify. Specificaly I need to some files but not all, but if my only option is to extract all then that would be fine also. There is an executible in the backup folder but it doesn't extract anything it just locks up.
For the TLR portion, need to access backup files made on an older HP laptop with windows vista to a newer HP latop running windows 7.

Terribly sorry for the post, I should have researched more before posting. I found the answer to my issue in another thread here on the HP forums! Thanks so much!!

Need help on transportable tablespace, after convert and move datafile over

I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.

I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?

I desperately need help with Mail, specifically sending

For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>

I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.

Hi! Need help on mail can't send or receive tried Bal checked everything I can think of any suggestions? Thank you

HI need help on mail Mac OS X leopard- can't send or receive anymore have tried checking Bal etc -everything seems ok- there is just a weird icon next to in box a sort of bell which I believe means no mail setup but I'm stuck any suggestions are welcome thank you regards

Most of the time I'd suspect one of 2 other things...
orange.fr has changed their authentication without telling their users.
Malformed eMails clogging up both ways.
So anyway, did Connection Doctor say it connected or not? What was exact error if there were some?
Can you login to their Webmail in a Btowser?
http://messagerie.orange.fr/mail.html

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
I think my wireless rooter's setting has some problem but cannot found anything to solve,
I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
need help
thanks

Thanks
I will and share the result.

HT201250 I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

Use Migration Assistant on your new Mac:
Click Continue:
On the next screen, choose your Time Machine backup disk.
Don't bother to migrate Applications unless you know they will work on your new Mac. For example, PowerPC applications won't work. Just migrate your user account which will copy all your photos, music, movies, and other documents.
Note: you will not be able to migrate the information to same account in which you are already logged in. Migration Assistant will tell you that and recommend what to do. It can migrate the information to a new account, but you will have to give it a name you might want to change later. One way around this is to create a temporary account, log in to it, and run Migration Assistant which will replace your normal account. Then, log out of the temporary account, log in to your usual one, verify everyting works as you expect, and delete the temporary one.
All this can be avoided when you set up a brand new Mac by running Setup Assistant which essentially does the same thing to create your new account, but most people are too excited to do that and elect to migrate later.

Need help accessing file on LSMW.

Hi,
I want to run an LSMW for direct input program RM06EEI0. This requires a logical file path. When I go to FILE transaction there is a TMP logical file path. The physical path assigned to this is <P=DIR_TEMP>\<FILENAME>.
Can I use this in my LSMW, and if so then please explain how.
Regards,
Warren.

hi, path in FILE is the folder in Application Server, not for your local PC.
in LSMW, if you want to use a local file, not need to search in FILE, just set folder in LSMW specify file step.

I need help with Mail

I recently erased my HD and reinstalled Yosemite. I wanted to manually move my saved emails over so I researched and it said to go to library/Mail/V2 and copy everything in there from the old system and paste it into the new system. I did this but got this message...
I don't know what this means. I should have gone online and asked, but tried to fix it myself. I thought if I deleted the gmail accounts and re-entered them it would fix it. When I opened Mail preferences, choose one of the two accounts and hit the "-" button, it gave me a message saying they couldn't be deleted and to do it from the system preferences, so I did that. Now Internet accounts in system preferences shows them as gone, but they are still in the Mail.app. I tried deleting them again from Mail preferences and it won't let me. I then tried to go re-add them to the system preferences and it will add a google account but says there is an error. I am fearful that I have really screwed my computer up. Please help! How do I add them back to my system preferences without errors and what do I do about the above pic of the message that keeps popping up in Mail? How can I delete the gmail accounts if I need to if Mail won't let me. I also haven't gotten a single new email in any of my accounts, including my iCloud and comcast ones since I did this all. What should I do?

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Need to restart the explorer.exe process virtually every single time I need to access a file

As the subject/title says.
This is on my replacement ThinkPad W530 which replaced my previous T530. I had my T530 from about April until earlier this week when it was picked up. The T530 gave me nothing but problems, including, but not limited to:
Constant stalling of everything on the laptop with no mouse movement
An out of the blue nonfunctioning microphone mute button and fingerprint reader a few weeks after I had the T530's motherboard replaced (because of the stalling issue)
Every hour or so, I would get successive blackouts of the screen that were about 3-5 seconds apart. Sometimes they would reset the maximisation of the windows I had open
But I digress; those were issues with my previous ThinkPad. Now the major standout issue I have with my W530 is that pretty much any time I want to access a file, I have to close and restart the explorer.exe process. This results from:
Not being able to access folders or folder shortcuts on my desktop
Not being able to use anything on my taskbar including the start menu. This includes hitting the windows key
NOTE: this is an issue with WINDOWS explorer and NOT INTERNET explorer, which one member of your support team was not able to distinguish - this person tried to direct me to WiFi troubleshooting.
The only way I have been able to remedy this has been to use task manager to reset it.
In addition, you would expect a W530 with an i7-3740QM and an Nvidia K2000M Quadro to be pretty much buttery smooth, especially considering it's about 2 weeks old, right? Far from it. This is the slowest excuse for a new laptop that is this well spec'd I have ever used.
I have done factory resets and pretty much everything under the sun within the realms of the Lenovo periperhal programs to try to remedy it (so as to not void my warranty) to no avail.
If this problem cannot be fixed without me going well out of my way, then I am demanding a refund. Your support team, whilst generally helpful and *usually* knowing what they are talking about, have not been a help, and have honestly just been another hurdle to get past so I can get my money back. I do applaud them for the willingness to sit and walk people through everything.
If this is the price I pay for the reliability of a Lenovo ThinkPad, then I greatly look forward to the glorious day I can be rid of Lenovo from my life and making about $500 while I go buy an equivalently or better spec'd laptop from quite literally any other computer company on the planet.

What operating system are you running? I assume they had you install the latest BIOS. True? If it were mine, I would suggest forcing it to use integrated graphics (in the BIOS) to rule out a problem with the NVidia driver.

Need help accessing Mail files after Updgrade to OS X 10.5

Similar Messages

Maybe you are looking for