Help decide which 2.5" portable HD to use with TM on MBP

I am trying to decide which HD(s) to purchase for use w/laptop when I upgrade to Leopard. When I go away for 2-4 weeks at a time I need a small 3x5" size. I don't want to be without the incremental backups for that long and just reconnect to a big drive when I get home. My problem is that the largest capacity firewire mini-drive is now the 320 GB triple interface Mercury-on-the-Go by OWC. I want this to be my only drive (i.e., not have a big desktop kind at home, too). My current usage is only 52 GB of my 111(120) GB internal drive. I would like to have: (1) a bootable clone of my old Tiger, just in case Leopard upgrade goes awry, (2) bootable clone of Leopard after the install (will use CCC for these), and then (3) Time Machine. Should I get TWO small hard drives instead of one? Reason being that I can use one dedicated just to TM, and the other to safeguard the two clones and any extra large stuff I want to outboard and not include in TM (photos, music, maybe movies). Just one 320 GB drive doesn't seem like enough to partition 4 ways--Trouble is, this gets expensive. OWC's 320 GB drive is $295 (for TM) and their 160 GB (for the other stuff) is $175. Does anyone know if a larger capacity 2.5" drive exists that could be put in a case? (500 GB would be great). If not, and I try to cut costs a bit, would a 200 or 250 GB drive for TM be enough? OR, any other recommendations on brands/sizes? I want quality, firewire 400+USB, and SMALL size. G-drives are even more expensive; WD's 320 passports are cheaper, but aren't firewire...alas. Can someone help me decide what to do? Thanks!

hi, zenday.
I'm a frequent traveller for work, and having a lot of data with me is key.
I develop software for the nokia stores worldwide, and the projects are quite big.
I only trust Lacie Drives as I've been using them for almost 7 years now.
never had a problem.
I just bought a Lacie mobile drive 250GB, my MBP has a 160GB drive.
I also use a Little Big Disk of 160GB for work projects, which I backup (entirely) every time I leave on another Lacie 2TB drive, which stays on in my office and can be accessed via VPN.
now this is my traveling configuration:
MBP 160GB
Lacie Mobile Disk 250 (time machine)
Lacie Little Big Disk 160 (work)
I also keep a whole system drive clone to another Lacie 160GB in case my internal drive dies on the way.
I know it might seem too drastic, but I never had a drive failure and I never want one.
I see all my friends losing data and work, and I can't afford that.
hope this helps.
ciao.ubi

Similar Messages

  • USB external portable HD for use with FCE and MBP ???????

    I've seen a 120 GB USB portable external Seagate HD for $117. Would this be usable as a scratch disk for use with my MBP 2.0 and final cut express HD 3.5. Are there problems with using USB externals? FW external hd's seem to be a good deal more expensive.
    Thanks.
    Maurice

    I bought one recently very cheaply to use for general storage.
    I found that FCE 3.0 worked perfectly and have been using it ever since instead of my FW HD.
    HOWEVER, before you dash out and buy one take note that I have only been tinkering around and experimenting with comparatively short projects of no importance.
    I strongly suspect that if I made a long and complicated film I might suffer - so pay the extra and get a FW HD !
    Incidentally for normal storage purposes the USB2 HD takes over twice the time to move files back and forth. So even for non-FCE use the Firewire HD is twice as fast.
    Ian.

  • Poll - Which Version Control Software Do You Use With LabVIEW?

    I wish the forums had a poll feature. I created a poll in the developer community - Which Version Control Software Do You Use With LabVIEW?
    http://decibel.ni.com/content/polls/1818
    Edit: I just saw that there already is a poll for that
    http://decibel.ni.com/content/polls/1050
    =====================
    LabVIEW 2012

    julieann wrote:
    You can use a source control provider to share files among multiple users, improve security and quality, and track changes to shared projects. Use LabVIEW with third-party source control providers so you can check out files and track changes from within LabVIEW. See info. here.
    Looks suspiciously like someone trying to increase hits on their blog. A coincidence that it was posted the same day as the blog post?
    Message has been reported to the moderator. Laura can decide whether or not it's appropriate.

  • What is the criteria used to decide which type of thermal measurement to use? Thermocouples or RTDs?

    When the temperature range of the process fits into both or either type of device's capability, are there factors that help determine which device would work better?

    RTDs are generally more accurate, more stable, and more expensive than thermocouples. RTDs usually have a smaller measurement range than thermocouples, however you've stated that both are sufficient in this respect. RTDs may be subject to problems with self heating, depending on the thermal conductivity of the media you are measuring. If the RTD is measuring a still gas, self heating can be a problem. If it's situated in a rapidly flowing liquid or mounted to couductive solid surface, this should not be an issue.
    Regards,
    Brent R.
    Applications Engineer
    National Instruments

  • Which Jars are recommended to be used with oracle 11.2.0.1 & reason to use

    Can someone please suggest which jars should be used with Oracle 11G(11.2.0.1)
    We are using ojdbc14.jar & ojdbc14_g.jar with Oracle 10.2.0.4.
    Now we are migrationg to Oracle 11G.
    Any help on this is appreciated.

    Hi,
    Can someone please suggest which jars should be used with Oracle 11G(11.2.0.1)
    We are using ojdbc14.jar & ojdbc14_g.jar with Oracle 10.2.0.4.
    Now we are migrationg to Oracle 11G.AFAIK, same should work with 11g.
    Any help on this is appreciated.Welcome 2 Oracle Forums :)
    Refer MOS tech notes:
    *Starting With Oracle JDBC Drivers [ID 401934.1]*
    This tech note can be access at http:support.oracle.com, but for access u need to have a valid CSI number.
    thanks,
    X A H E E R

  • Which version of disk cleaner to use with OS X 10.4.11 ?

    Hi,
    I need to clean up my mac with a ccleaner or oryx disk utility.
    all the versions i download do not work with my version of OS X 10.4.11.
    Which software and version should i use then?
    Thanks in advance
    J

    You should never, EVER let a computer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    DO NOT USE ANY "CLEANING" STYLE APPS!!!!!!!
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto or Aperture, both have its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you are an iMovie/ Final Cut user, both apps have their own individual Trash location that needs to be emptied, too!
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other files try...
    Also, FindAnyFile
    http://apps.tempel.org/FindAnyFile/
    Download an app called OnyX for your version of OS X.
    http://www.titanium.free.fr/downloadonyx.php
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Moving iTunes library
    http://support.apple.com/kb/HT1449
    Moving iPhoto library
    http://support.apple.com/kb/PH2506
    Moving iMovie projects folder
    http://support.apple.com/kb/ph2289

  • Need help deciding which adobe product to purchase (Photoshop or Illustrator)

    hello,
    I am about to be given the task of creating the graphics for my company on a specific task.
    We recently got a new printer to create cards with and before now, everyone has been running into trouble getting clean, accurately colored prints for these cards, and I am being given the task of creating them and need to decide what program I will need to achieve this.
    What happens, is a company orders a set of cards and sends their graphic, which I will be receiving at a different size than will be needed for printing, so I need to enlarge it, which distorts the colors.
    Also, on almost all of the images, I will be needing to add some words to the graphic before printing it, like the company name or address etc. but then occasionally, I am given some general images and generic instructions which I need to follow in order to create the graphic.
    So, I was thinking that photoshop would help me to refill the colors after resizing an image, or when I need to create the graphic mostly myself, yet I will be having difficulty creating the words required.
    But then illustrator would be giving me excelent fonts and words since its a vector program, yet I believe I will run into problems colorizing my graphics once resized.
    So, what does everyone think would be the better option here?
    Or what would be a good work around for either photoshop or illustrator that would help me resolve the problems arrising because I do not have the other?
    Or what are some other potential problems I might possibly run into?

    Well exactally,
    Being the economic misfortune that hit the country, my company doesn't have the funds to pay for a professional and they are trying to find a way to keep the project inside the building.
    me being 20 years old and wishing to pursue a career in graphic design sees this as a great opportunity to learn alot about printmaking as well as how to use graphic editing programs on a level higher than taught in school.
    My boss is wanting me, and going to pay for me, to go under several hours of training to accomplish what needs to be done, but like I said, I am given the task of trying to figure out what kind of software I am going to need for the task, which is why I am here asking about the programs.
    Also, it is kind of my first attempt at trying to further understand exactally what each of the programs do, and so far, I have learned quite alot by searching around and asking what other people think.
    So, If you don't find it to be too hard to put your opinions or thoughts about how I could best accomplish creating the cleanest cards I would greatly appreciate it.
    Sincerely,
    BeeHiver

  • Which model should I use for Multimedia purposes? (Multimedia major in need of help deciding which model is the best for me.)

    Multimedia major looking for a model in Apple that is best for me. Any advice is welcome.

    Hi
    1)you need to check the requiered characteristics are available or not from these data sources which supply data to the above said cubes,,2
    2)0CCA_C11
    3)0IC_C03
    You cann't get the inventory report from the purchasing data(purchasing data always talks about the vendor supplying inventory,it never talks about the production inventory)
    Hope it helps
    Thanks
    Teja

  • I'm in need of help deciding which power setup to use with new MBP

    Hello all,
    So - after using an original 1.83 MBP for many years w/Aperture... I've recently acquired a new MBP!
    and initially I had the power setup for better battery life... and often found myself wondering, "hmmm...considering this thing has way more juice under the hood - it sure doesn't run much quicker than the old one?!?!"
    And then I realized - I had the lesser video chip running!
    When I turned on the better performance - and then ran Aperture (likely my most demanding process) holy Crap! Does this thing Fly!!!
    Now the problem; hence my question - is:
    "is there a way to set it up so that while under battery power it runs on the better battery life option, yet when plugged in to endless power - it will run on better performance?" it would be much nicer - let alone make much more sense if this option was clear-cut & simple to select... or am I just missing it some where in the menus? Seems that you can only have one or the other, despite battery or plugin power. And to switch means logging out and the re-logging back in...?!?!?!
    Any thoughts?

    "is there a way to set it up so that while under battery power it runs on the better battery life option, yet when plugged in to endless power - it will run on better performance?"
    No, there isn't. You're right — it would be nicer if there were.
    Seems that you can only have one or the other, despite battery or plugin power. And to switch means logging out and the re-logging back in...
    That's correct.

  • I want to link my Mac Mini through my independent hifi system, which forms part of my home tv system which is the monitor I am using with the Mac Mini. The hdmi cable I am using comes from the receiver of the tv. I cannot get sound from the Mac Mini. Do

    I cannot link my new MacMini with my TV's sound system. It's a Pioneer screen & receiver with an independent Pioneer Amp. The Mac Mini does not pick up the sound through the hdmi cable, so how do I get sound going through the MacMini so I can appreciate the music and films I want to hear. Do I need another piece of Apple kit? I have seen 'Express' on Apples web site. Surely I dont have to pay for this as well?
    I used to have an Apple TV box which had a seperate audio connection from my Pioneer Amp and it worked great.
    Help will be appreciated

    The Mac Mini is going to be used for an Internet connection on the Pioneer Plasma/receiver so I can also play stored films from a seperate hard drive. The receiver has an HDMI connection which I have connected the Mac Mini too. the picture is fine, but there is no sound. I have checked the 'sound' settings on the Mac Mini and it registers the Pioneer PDP receiver is connected but states it has no audible connection?

  • Which kind of DVI cable to use with a KVM switch?

    Hi. I have a Power Macintosh G5 and three (3) Mac Minis. I also have a Apple Cinema Display (DVI). I recently purchased a Avocent 4 Port DVI/USB KVM switch. I just got it today. It looks like a nice switch. However, it did not come with any cables. So, I need to buy some USB cables and some DVI cables. Should I buy DVI-A, DVI-D, or "dual" DVI cables?
    Thanks in advance for help.

    Unless you have a 30" ACD, which requires dual-link DVI, you want to buy DVI-D cables.

  • Which iPad 4 versions can you use with Swedish mobile SIM cards?

    Browsing around user forums and getting more and more confused :b If I want to use an iPad 4 with a Swedish SIM card as of today = being able to use an iPad 4 in Sweden without Wi-fi connection, which models do I have to choose from? Read a lot about 4G technology not being compatible with Swedish technology etc.... Help?

    You can not "unlock it to T-Mobile". If the phone is locked to AT&T, ONLY AT&T can authorize unlocking it. Contact them and find out if it's eligible for unlocking. If it is, and you meet their requirements, they will process the request to unlock it. If it is not eligible, and/or you don't meet their requirements, then it can only be used on AT&T.

  • Whats the best portable drive for use with iMovie?

    I use iMovie on my macbook on my long commute to and from work. I have read that the best solution is to edit movies on an external drive and not the one on the mac.
    What is the minimum drive speed (rpm) and minimum transfer (firewire 400 ? usb 2?) for this to work.
    All the drives on the online apple store talk about transfering documents, photos and using them as backup devices and I am trying to be cautious about what I buy given a limited budget.
    For example is the "Iomega 160GB Portable Hard Drive with Dual Interface" suitable ?
    All advice gratefully received, thanks

    I haven't seen that point.
    I worked on my old iMac using just the hard drive for a while. Performance is not the issue, but space can be, which is why I moved to an external drive.
    Drive performance is complicated. If you have enough memory, your internal drive will probably have better performance than an external drive. The SATA bus is a lot faster than the FireWire or USB buses.
    On the other hand, if you are memory constrained and are using other i/o intensive applications at the same time, the external may perform better. You definitely want to avoid excessive swapping of your virtual memory while using iMovie or anything else. (and this is best handled by having sufficient RAM. I have 2GB.
    In iMovie 08, once you have your video imported into an event, you can edit away, because iMovie is just writing pointers in the project file to the source files in the EVENT. Disk performance is more critical on import (front end) and sharing or rendering (back-end), but internal drives are more than up to this task.
    Space is the issue. If you are shooting high definition footage, you can get event files of 20GB to 40GB+. That can eat up a laptop real quick.

  • I am going to cancel my home cox email which one should switch to to use with my ip hone i'm a realtor i need folders

    i am going to cancel my cox email i have at home and want to know which one is more compitable with my iphone. i am a realtor and i need to have folders

    Get a Gmail account...free...and you can set it up as IMAP or Exchange:
    Exchange setup:
    http://www.google.com/mobile/sync/
    IMAP:
    http://mail.google.com/support/bin/answer.py?answer=75725

  • Which dual layer DVD discs to use with my new iMac???

    I just purchased a new iMac from Apple, and would like to know which Dual layer DVD discs work best. Does Apple sell their own DL discs?
    Thanks,
    Bryan

    I highly recommend DVD+R DL discs by TDK. I use TDK almost exclusively for all my disc burning needs (the other brand I recommend for CD's is Philips, but they are hard to find).

Maybe you are looking for

  • Concatenate with Commas in Non-Blank Cells

    I am concatenating last and first name cells in a pair of long columns.  I do not want to display commas in the non-blank cells when extending the formula down the sheet.  On the web I found a formula which almost works:  =C7&IF(B7="",""," "&B7) . Bu

  • Adobe CC apps will not open after Suitcase Fusion 6 upgrade.

    It appears that, after installing the recent Suitcase Fusion 6 upgrade (WIN7-64-bit) most of my Adobe CC apps won't open?!

  • How the sales orders in CRM replicated to ECC??????????

    Hello gurus I am implementing CRM with integration with ERP, I would like to know if I have more than one type of sales documents in CRM and I want to replicate them to ECC do I have to have the same number of the sales document types in ECC or only

  • 3 minutes from wake from sleep  to control

    This issue started a couple months ago, I was still in 10.8 and thought upgrading to 10.9 would help, it has not. After I put my Macbook pro to sleep, when I open the lid it can take as long as three minutes until I have full control of the desktop.

  • Move-corresponding in table type Field-Symbols

    Hi,     I have to use one statement in field-symbol similar to "move-corresponding" in normal internal table.Is it possible to use statement similar to "Move-corresponding in field-symbols". For Eg: Field-symbols <FA_IT> type standard table. data:beg