Help for user creation for Webshop

Hi ,
I am working on SAP CRM 2007 Ecommerce. I want to log into the webshop.
Please help me with the procedure for creation of users to log into the webshop.
Regards,
Sumit

Hi Sumit,
I think it should be the same one for shopadmin/admin/xcm/init.do, XCM user.
The XCM user is the J2EE visual admin user. J2EE guys know how to create this user based on relevent document, and this has to be done on J2EE server. :P
Usually, the default user is Administrator with password blank. It maight be different for each J2EE version.
Hongyan

Similar Messages

Needed urgent help for user creation in security manager in ODI 11g

Hi Gurus,
I have an urgent requirement in ODI security manager and i am completely helpless. We need specific steps for the user creation with sufficient priviledges. The detailed requirements are:
1. There is a group of users under the framework team and these users should be able to edit the Knowledge modules only. All other objects (e.g. projects, interface, procedures or development related objects) should only be in read only mode for them.
2. There is a group of users under the development team. The priviledges of these users should be mutually exclusive to that of the framework team users. i.e. the development team should be able to edit or delete all development related objects (e.g. projects, interface, proc etc.) but the knowledge modules should only be in read only mode for them.
Now I will explain what i have tried out:
I am working on ODI 11.1.1.5.
I have created a user with NG DESIGNER and CONNECT profile. Dragged and dropped all the projects on the user and selected all methods in all repositories (check sign). However when i connect with that user i cannot open the KMs (as far as development team is concerned its fine) but i can also not open interfaces as well as procedures (which is not acceptable from development point of view).
Also when i tried creating a user from the framework team point of view i could not see any option related to KMs (To give edit priviledge).
Please help me out guys. I have also searched oracle documentation and believe me the security manager section is not very good. If you guys can help me out with specific steps it would be great (I have tried the hints given in oracle documentation and they dont work, the ODI security manager behaves strangely :-(
Thanks in advance,
SB

Similar requirement here guys. Any pointers. I was able to achieve this by restricting development user from supervisor access. In that case the development user can not edit the interfaces. Any known defefct?

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

Workflow for User Creation

Hi
I would like to implement the Work Flow for User Creation, i.e.whenever the admin creates the user id, it should go to manager for approval and after that it pwd should be delivered to the respective user.
Can any one guide me on how to implement the same. Also I would like to know the use of customisation under Set Approval Indicator in IMG settings.
Suitable points will be awarded.
Regards,
PKM

Hi,
Pls refer the foll link:
http://help.sap.com/saphelp_srm40/helpdata/en/5a/af5f0b85d011d2b42d006094b92d37/content.htm
BR,
Disha.
Pls reward points for useful answers.

Search help for user field for WBS element

Hi,
how can I add a search help to one of the user fields for WBS elements without modification? Is there an exit which I can use? I want to have a search help for field PRPS-USR02.
Thanks for your help.

Hi
Create an elementary serach help using the Table USR01 or USR03
see the steps
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Regards
Anji

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

GRC 10: Initial password for multiple users creation in a ARQ request???

Hi All,
I was trying to create a request in ARQ for multiple users. I noticed that, I could add all the necessary required information for multiple users using the template. I added the roles as well. However, I could not set the initial password for multiple users as the tab "User System Details" (where the initial password is provided for a single user) is disabled!!!
The users were successfully created in the R/3 system. However, due to non-availability of initial password, these users could not log into the R/3 system.
May I know how to set the initial password for multiple users?
Regards,
faisal

Vit,
I was trying to test this multiple user creation scenario. But I am surprise to get a template where in I have only below mentioned fields:
1. User Name
2. User Id
3. Email
I filled these details and uploaded. Then filled the "User Access" details. While submitting the request, I got the error:
"Last name is not mentioned for user id XXX"
But there is not such column in provided template by GRC!
I added 2 columns: First Name and Last Name and saved it and uploaded again. These details are not picked up!
Following are the only columns shown:
1. User Name
2. User Id
3. Email
4. Manager
Out of above, only "Manager" field is editable and others are disabled.
Last time I remember, I has got complete template with all the columns. Unfortunately, I have deleted it and not available with me now.
Any idea you have why am I getting such incomplete template?
Regards,
faisal

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

How to add user defined F4 help for s LDB field?

Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
Mahesh

Hi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

IW31- How to add Search help for User specific fields in IW31 transaction.

Hi Experts,
I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
Is there any user exit for this requirement.
Please reply, it will be very helpful for me.
Regards,
B. V. Rao

Bala,
See the following user-exits:
IWO10015: F4 Help for user fields on operation
IWO10016: Customer enhancement to check operation user fields
PeteA
[www.pjas.com]

Change Search help for Location in Schedule creation screen(NWBC)

Hi all,
My requirement is to change the standard search help for Location field in Standard stop sequence of Schedule creation in NWBC.
Presently, the search help for the location field is a webdynpro component WDR_F4_ELEMENTARY .Is there any possibility to replace with the custom search help.
Can anybody please let me know how to replace the search help.
Thanks&Regards,
Sharmista.

Hi
I suppose you may create a component customizing for /SCMTMS/WDCC_SCH_C_LOC_ATS, and maintain your DDIC search help for location ID, this will replace the one assigned in structure:
You may only maintain DDIC search help here, but if you have a custom developed search help, then you may need to go with another approach, in viewexit class (/SCMTMS/CL_UI_VIEWEXIT_SCH) adapt_fields (ADAPT_FIELDS), modify the attribute 'WD_VALUE_HELP' = custom search help.
Hope it helps

Incorrect search help for Delivery address in SRM User Settings

Hi experts,
We use SRM 7.0. When i want to change Users Attribute Delivery address (in SRM User Settings) and call search help for this, than i get list with 3 identical addresses.
For example:
Value                          Label
111                         usa/Ny/1
111                         usa/Ny/1
111                         usa/Ny/1
222                         usa/Sf/2
222                         usa/Sf/2
222                         usa/Sf/2
333                         france/P/3
333                         france/P/3
333                         france/P/3
How can I delete undue entries?
Thanks a lot

Hi
Are all adreess numbers Unique ?
every ship to address has unique . can you check data base level ?
Muthu

Hoe to provide a download help for the user

hi all
How to provide a download help for users, i.e. if i select download radia button and
if i place cursor on file path it should provide the user to select what ever the drive and folder he needs can any body help asap.
regards
reddy.

Check this..
parameters : p_file like rlgrap-filename .
at selection-screen on value-request for p_file.
perform f4_on_filename using p_file .
*&      Form F4_ON_FILENAME
      text
     -->P_P_FILE text
form f4_on_filename using i_file .
data:l_maske(100) type c, l_subrc type sy-subrc ,
       w_fileinfo   type ocs_f_info .
data:t_fileinfo   type table of ocs_f_info     .
concatenate 'Text Files (.prn;.txt;*.csv)'(006)
              '|.prn;.txt;*.csv|'
              into l_maske.
call function 'OCS_FILENAME_GET'
    exporting
      pi_mask     = l_maske
    tables
      pt_fileinfo = t_fileinfo
    exceptions
      others      = 6.
l_subrc = sy-subrc.
if l_subrc is initial.
    read table t_fileinfo into w_fileinfo index 1.
    concatenate w_fileinfo-file_path w_fileinfo-file_name into i_file.
else.
    clear i_file.
    message id sy-msgid type 'S' number sy-msgno with sy-msgv1 sy-msgv2
                                                      sy-msgv3 sy-msgv4.
endif.
endform.                    " F4_ON_FILENAME
it will come on F4 help... not by placing cursor. that is not possible. One thing you can do is.. you can disable this file name parameter.. when the radio-button for file load is unchecked.

What does a new non-DE user need? | Help for a Wiki page

Hey Archers,
I'm using Arch with the Compiz Standalone Window Manager and I need some help for a project.
It turns out (who knew) that computers need a lot more to run smoothly than just a desktop and applications. You need network managers, gtk themes and much much more. Now, Desktop Environments such as GNOME and KDE provide a lot of these programs built-in, good for them, but I'm looking to build my system as dependency-free as I can and the big DE's don't really provide that. Especially GNOME just ropes me in whenever I want to use the tiniest piece of it (darn you gnome-keyring).
So I come to you fora, with a quest for information. I want to compile an overview of essential and useful applications with minimal dependencies that allow a CompizIndy user to build his system freely. And if I get enough information, I want to turn it into its own page for the Wiki so it becomes easier to get started with a birds-eye view of what you need to flesh out your system (not exclusively for CompizIndy btw). So please help me!
What applications/daemons/tools should a new system install? I'm not asking which ones are the best or worst or your favorites, just which kinds do you need --that aren't covered in the install guide--?
For example it's advisable to get:
Panel/dock
desktop manager
network manager
compositing manager
a tool for managing removable devices (ntfs-3g etc)
a packer/unpacker
a screensaver
power management
alt-F2 runcommand
custom keybindings
a user switch/logout manager
a volume manager
etc.
So what do you recommend? What do you need to get up and going?
Hoping to hear from you guys and girls,
Matthias
PS: if I'm doubling up on anything, please let me know and save me effort and embarassment ^_^
Last edited by Matsjo (2011-01-28 20:37:26)

There are many threads on this, although individual ones asking for "the best app to do XXX". You could try searching those. Also Search for the LnF Awards threads. you might find a few ideas there. We also have wiki pages for light-weight applications which might be useful
Panel/dock none
desktop manager none
network manager netcfg
compositing manager none or xcompmgr (for basic compositing)
a tool for managing removable devices (ntfs-3g etc) udiskie or udev rules or devmon
a packer/unpacker coreutils eg - tar, bzip etc with an alias called "ex" in .aliases
a screensaver none
power management ???
alt-F2 runcommand gmrun
custom keybindings xbindkeys
a user switch/logout manager none
a volume manager see udiskie....
BTW, if this is for you, then simply install Arch and use a non DE based WM --- eventually you will figure out what you are missing

Tasks for user creation

Hi,
Please tell me the task names used for creating users in ABAP systems.
Is it the Provision ABAP users or Create ABAP user?

Hello.
the "Create ABAP user" is the task that contains the ToSAP pass which provisions the user in the ABAP systems
The "Provision ABAP user" is an ordered task group which contains the logic to provision users correctly to the ABAP depending on what happened before (user creation, user or group changings).
Best regards
Dominik Trui

Limiting the value help for a user input variable as required

Hello Gurus,
I have a requirement :-
Restrict the value help for a user input variable in a query to only a required set of values instead of the default behaviour. ie instead of having all the values in the master data of that characteristics in the value help.
How do I go about it? - Do I have to explore the precalculated value set feature?
If so, please tell me how to go about it in BI 7.I would appreciate if you could explain it in detail rather than sending me a URL because I have gone through most of them but Iam yet to figure out how to create the broadcast setting and subsequent steps.
Thanks for your time.
Regards,
Kris_Hitman

I believe if the User doesn't want to see any particular values in F4 help then it means they are not intrested in viewing the transaction data related to those values.
So why don't you restrict that object with the required values. Then the F4 help will automatically display only those values.

Help for user creation for Webshop

Similar Messages

Maybe you are looking for