Help Getting error 1602 in itunes on the ipad
HELP ME PLEASE everytime i try to update in itunes i get a 1602 error it gets stuck a the thrid verifying with apple and then after like three minutes it doesnt move i have tried everything to fix it right now it is just stuck on a black screen i can put it in dfu mode but thats it ...i have also tried differnet usb plugs but nothing i even tried two different computers i am currently running windows 7.. i dont know whats wrong if someone could help me that would be awesome i cant even put the device in recovery mode only dfu mode
http://www.youtube.com/watch?v=AsWnZOCyt-0 here is a link to a video i uploaded that shows the exact problem that i am having
Similar Messages
-
I am no longer getting error messages in iTunes on the computer
I am getting an iTunes Sync error on my phone. It says to see iTunes for more information. In the past I would get a box with more info. The latest update there is nothing in iTunes. What gives?
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
after update my apple tv 2 and get error 1602 on itunes, i start it and found no content showing there only settings and computers?
please any answer.
my itunes is the latest.Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore. -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
Getting error 2349 installing itunes on vista 64-bit. Please help!
getting error 2349 installing itunes on vista 64-bit. Please help!
I've been having the same issue for the past few months. Try this http://support.apple.com/kb/HT1926
go through each step of the general installation troubleshooting completely then restart your computer and try to install it again. It worked for me on the first try so hopefully this helps! -
When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes
When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Are you trying to restore to a PC or an Mac? Either way, I'd remove iTunes, empty the trash, restart, and download/install the latest version. Also, check the versions of OS that the latest build of iTunes will work with. -
Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
Thank youThere is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
About the error code.....
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
If needed.....
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again. -
Hi Guys When trying to install latest version of Apple software I'm getting error message that Itunes has not been properly installed which is strange as I played ' Take Five' two days ago. Can anyone help please?
Jim HoustonPlease see this post by turingtest2:
-
I am upgrading to iOS 5. I get error (-37) from iTunes whe it is backing up the phone. What's is that error and what can i do to fix it
I get the same error when trying to update an iPhone 4. Any suggestions?
-
Keep getting error 69 with iTunes 5.0, and it wont let me
keep getting error 69 with iTunes 5.0... Im pretty sure its the version's fault, but it wont let me install a previous version I have on CD either.
Even after uninstalling iTunes I get error
"1623: installation failed"
everytime I try to install the older iTunes off my CD.
Is there something extra I have to do completly get rid of 5.0 before I install an older version? like shot my computer?
please help. thanksMake sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download
Also... See here for Connection Issues
http://support.apple.com/kb/TS1379
http://www.apple.com/support/itunes/troubleshooting/
Temporarily disable your firewall and antivirus software and try again... -
How do I get iTunes on the iPad to NEVER show album artwork when clicking a song?
Hi Folks,
How do I get iTunes on the iPad to NEVER show album artwork when clicking a song?
I go in-and-out of the iPod app quite a lot (I use the iPad to help me while practicing music and I use multiple apps), so it's frustrating to have to constantly close the album artwork.
Apologies - I saw many threads about this but none that answered how to ALWAYS stop iTunes from jumping to artwork. If I missed the correct thread, I would appreciate a link.
Thank you.That's what I thought - Apple generally has clean interfaces, so if I can't find an option to do something, it probably doesn't exist.
Thank you for a quick answer - and yes, I'll add this feedback.
I also just dropped Google feedback to PUT THE HOME LINK BACK IN THEIR LOGO.
What madness came over them to remove it??
I heard their engineers had a battle over this decision as well. -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
Still cann't get error 306 of itunes after reset store cache
still cann't get error 306 of itunes after reset store cache
Have you tried adjusting Parental Control?
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls. -
HT4061 Am getting error 3194 unable to use the ipone, how can I rectify this?
Am getting error 3194 unable to use the ipone, how can I rectify this?
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.
Maybe you are looking for
-
System Image Utility / Automator Add User Account no default shell
I've noticed when creating a customized netrestore flow in System Image Utility for Yosemite, the result of the "Add User Account" action is a user missing a default shell. Noticed this when terminal kept closing as soon as it was opened. dscl -creat
-
How does PDF convert CMYK to RGB?
Hi I want to know the formula that PDF uses to convert DeviceCMYK to DeviceRGB values. It seems that Photoshop and PDF uses the same forula, where the other Programs use the "normal" formula, which can be found on the internet and some online RGB to
-
Hi anyone. Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB. I've never needed one previously but I now need to update the firmware on my camera. Can I get one, if so which one's best? Many thanks.
-
How to import only RAW images from folder with RAW & JPEGs?
My system is set up that I have both RAW & JPEGs in the same folder since I shoot JPEG+RAW. How can I import just the raw images without also sucking in the jpegs? There is no way to distinguish the difference in the Import box and also no way to eas
-
No entry in table T512Q and T512P
hi gurus , i'm facing a problem when i'm tryin to view HR Master data sheet (S_AHR_61016360) it saying there is no data in tables T512Q and T512P. But if you view the tables via transaction SE11 there is data . can you assist please.