Help getting Solaris-X86 DNS working and set it up a server.

Just got solaris 8 02/02 working on a spare machine. I am new to
setting Solaris but determined to get to know it.
Couple of questions:
1. I have assigned the machine a IP address and host ID. I can ping
the machine OK. I can't get the DNS service to work however. I do not
have my own domain and the machine is behind a linksys router. I
tried using the pacbell.net as the domain dame but it can't find the
DNS server. I of course do have the DNS IP addresses. Any clues?
I followed http://www.execpc.com/~keithp/bdlogsol.htm#basics setup by
Keith Parkansky but still can't get it work.
Any clues?
2nd question I am cramped for space so I don't want to use a monitor
on the machine. I tried using telnet to connect to the machine
unsuccesfully. What I want to be able to do is set it up as a server
so that I can use both the console and CDE from my laptop on my HAN
(home area network:-). I already use exceed on the laptop to connect
to other UNIX host. Any Clues?
Otherwise I would say the Solaris Rocks, and I am looking forward to
playing around with it?

1) set it up as new and have it log into the windows domain (have to research how to do this)
Bind the Mac to the domain using Disk Utility
What would you do??
Login to each Mac with a domain account and have the Mac cache the credentials when logging so it creates a local home folder that's associate with a domain account. Enable home syncing on each Mac so your home folder is the exact same on each Mac.

Similar Messages

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

HT201272 I need a refund on my books I purchased from itunes because my ipod will not support them. I was on the apple chat last night and they tried to help but it did not work and they told me my ipod was to old to support them. I was wondering how do I

I need a refund on my books I purchased from itunes because my ipod will not support them. I was on the apple chat last night and they tried to help but it did not work and they told me my ipod was to old to support them. I was wondering how do I get the refund on them?

Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Need help getting Apple Extreme to work with Be box

Anyone able to give an idiots guide to getting Apple Extreme to work with Be Box wireless modem?
Used to have Orange (Wanadoo) broadband with Livebox wireless router, which i had my AE wired up to and it worked fine. Signed up with Be* and managed to get their wireless router working and communicating with my Mac OK. When i hooked up AE the green light came on but i can't manage to get my Mac to find it.
Any help would be very appreciated.
Thanks.

Hello Orang Hutan. Welcome to the Apple Discussions!
What is your connectivity goal for the 802.11n AirPort Extreme Base Station (AEBSn)?
o Connect it directly to the Be Box wireless router via Ethernet, or
o Connect it wirelessly to the Be Box's wireless network?
If it is to go the wireless route, do you want the AEBSn to extend the wireless range of the Be Box?

Itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........

itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........

i could not do anything with itune, check updates, help. etc..
i am using windows 7.. and the latest itune, (previous itune also can't sync)

I have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
Model Identifier Utility
rachelfromnorthumberland wrote:
what apps can i get??
Finding iOS Apps Compatible with Older Devices

Plz help me my facetime not working and no have facetime app

plz help me my facetime not working and no have facetime app

In what way is it not working?
Which iPhone do you have?
Which iOS version?
Where did you purchase your iPhone?
Any info at all about your issue?

I want some help i do reset all content and setting and when i do it my ipad show mw a cercle an it do loading what i can do ?

i want some help i do reset all content and setting and when i do it my ipad show mw a cercle an it do loading what i can do ?

Have you tried connecting the iPad to your computer and using iTunes to restore to factory settings? These are the basic steps.
You can read more here.
http://support.apple.com/kb/HT1414
Do not restore from a backup at the end if you want to restore as new.
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices. Select the Summary tab, and click the Restore button.
Click Restore

When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.

When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.

Disable or turn off your firewall, anti-virus, and all security software and try the download again.
Stedman

Help getting SQL Developer to work

I'm just trying to get SQL Developer to work so I can use student databases. I have no intent of being a networker, and I definetly have no intent of failing this class because I can't do my homework.
Update.
Someone from my Java Class told me to restart the services related to Oracle. I attempted to do so, but got the following errors:
http://img220.imageshack.us/img220/5087/clipboard01hq.jpg
http://img27.imageshack.us/img27/32/clipboard02ro.jpg
I believe the TNSListener service is the main problem (seeing as when I try to open the database I get an error saying "TNSListener service is not running.") So I looked that up, and it said to check sqlnet.log:
Sat Jan 29 18:11:16 2011
Create Relation ADR_CONTROL
Create Relation INC_METER_IMPT_DEF
Create Relation INC_METER_PK_IMPTS
Directory does not exist for read/write [C:\app\Davidi\product\11.1.0\db_1\log] [C:\app\Davidi\product\11.1.0\db_1\log\diag\clients]
Fatal NI connect error 12541, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\Install\sqldeveloper-2.1.1.64.45\sqldeveloper\sqldeveloper.exe)(HOST=THE-FALCON)(USER=Davidi))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.6.0 - Production
Time: 29-JAN-2011 18:11:18
Tracing not turned on.
Tns error struct:
ns main err code: 12541
TNS-12541: TNS:no listener
ns secondary err code: 12560
nt main err code: 511
TNS-00511: No listener
nt secondary err code: 61
nt OS err code: 0
Thu Feb 03 23:04:39 2011
Directory does not exist for read/write [C:\app\Davidi\product\11.1.0\db_3\log] [C:\app\Davidi\product\11.1.0\db_3\log\diag]
Fatal NI connect error 12541, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=The-Falcon)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=C:\Install\sqldeveloper-2.1.1.64.45\sqldeveloper\sqldeveloper.exe)(HOST=THE-FALCON)(USER=Davidi))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.6.0 - Production
Time: 03-FEB-2011 23:04:41
Tracing not turned on.
Tns error struct:
ns main err code: 12541
TNS-12541: TNS:no listener
ns secondary err code: 12560
nt main err code: 511
TNS-00511: No listener
nt secondary err code: 61
nt OS err code: 0
Thu Feb 03 23:08:05 2011
Directory does not exist for read/write [C:\app\Davidi\product\11.1.0\db_3\log] [C:\app\Davidi\product\11.1.0\db_3\log\diag]
Thu Feb 03 23:08:31 2011
Directory does not exist for read/write [C:\app\Davidi\product\11.1.0\db_3\log] [C:\app\Davidi\product\11.1.0\db_3\log\diag]
Thu Feb 03 23:09:36 2011
Directory does not exist for read/write [C:\app\Davidi\product\11.1.0\db_3\log] [C:\app\Davidi\product\11.1.0\db_3\log\diag]
And now I'm stuck again. Does anyone have any suggestions?

Oh right. I did change the port in an attempt to get Scott to work.
Changed back to port 1521, but still no luck.
I think my problem has something to do with OracleDBConsoleorcl. I get Error Code 2 when I try to start that service up.
Although...my SERVERNAME_SID is 192.168.15.101_orcl (Directory: C:\app\Davidi\product\11.1.0\db_1\192.168.15.101_orcl)
Which was the IP Address ipconfig set up the day that SQL Developer was actually working. Of course, that IP Address changes every time you restart windows. My teacher suggested that I set up a static IP Address or try setting it to local host, but I really don't know how to do either of those.
Any help would be appreciated.
Thank you.

[SOLVED] Need some help getting the sound to work again

Recently I changed the motherboard and CPU to an AM3 platform, everything works with my previous setup except sound.
Reinstalling alsa-utils and rebooting had absolutely no effect. Google didn't help either.
lspci -v
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 8415
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd-hda-intel
The motherboard documentation refers to it as "VIA VTI708S".
VLC complains about alsa-lib. Reinstalling it also didn't help.
aplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:654: audio open error: No such file or directory
alsamixer
cannot open mixer: No such file or directory
Edit:
Damn ASUS font... It's "VIA VT1708S" (number one, not the letter "i") ! Duh. No wonder Google couldn't find any info.
Still, any ideas ? Or would you just rather let me squirm a little and diagnose the problem myself ?
Last edited by DSpider (2010-11-28 18:15:41)

sudo modprobe snd-hda-intel
(I think it's what you tried to tell me, igndenok)
Great. It took the bulk of my day trying to figure out how to get this thing to work.
VolWheel is now set to adjust "Master Front" (it was previously set to "Master" with the old motherboard) and the Sonata volume bar apparently works too, just like I wanted (adjusting the PCM volume by default). Good. Great ! Now I just need to set the "snd-hda-intel" module to load at boot so I don't have to type "sudo modprobe snd-hda-intel" all the time and this thread can be considered SOLVED.
sudo nano /etc/rc.conf
...and add the following:
MODULES="... snd-hda-intel ..."
(also removed snd-ac97-codec from the list because that's what the old mobo used)
THANKS FOR ALL YOUR HELP !
PS: Just out of curiosity, why is it called "snd-hda-intel" ? Why intel ? The CPU is AMD, the chipset is Nvidia nForce, sound is VIA...
Anyone know ? I'll subscribe to this topic just in case anyone knows. Thanks again.
Last edited by DSpider (2010-11-28 18:16:36)

I need help getting Mini Bridge to work in PS CS6

I have already tried deleting the folder and rebooting the computer, I have tried creating a new user account, I have tried uninstalling and reinstalling the entire package and I cannot get Mini Bridge to work at all. It just keeps going to "Mini Bridge waiting for Bridge CS6..." and then never finds anything. I am having this issue on both my Macbook Pro Retina 15 and my MacBook Pro 13 (Early 2011 model). I cannot seem to find any other solutions to this problem online. I also made sure that both Macbooks are fully updated as well as all CS6 software titles. Please help me fix this!
I also made sure I added it to the exceptions list in the firewall too.

Moving the discussion to PS forum
You can also follow the solution suggested in http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
they may help

I need help getting this program to work.

K. I don't pay much attention in my AP Comp Science Class.. but my teacher said if i can get this program to work i get an a for the semester... The program is Metrowerks Codewarrior IDE.. we are running it on windows 98 i think. She said she can't get it to compile.. so i guess it just needs to be able to input simple java programs (i.e. loops, just the regular crap) and compile them and run them...i have no clue what is wrong with it.. it could just need a patch...or we may just be going about it the wrong way...any help would be SUPER appreciated...

K. I don't pay much attention in my AP Comp Science
Class.. but my teacher said if i can get this programYou better did.
to work i get an a for the semester... The program is
Metrowerks Codewarrior IDE.. we are running it on
windows 98 i think. She said she can't get it toAtleast be sure of the OS.
compile.. so i guess it just needs to be able to
input simple java programs (i.e. loops, just the
regular crap) and compile them and run them...i have
no clue what is wrong with it.. it could just need aEven we don't.
patch...or we may just be going about it the wrong
way...any help would be SUPER appreciated...Nothing in your thread really speaks of the problem. And since you mentioned homework, there's hardly anyone to be interested in that.
Regards
***Annie***

Need help getting my MacBook to work a with a D-Link print server

I'm trying to set up my MacBook Pro running OS X Ver 10.4.11 to print to a HP PSC 2210 All in One printer attached to a D-Link DP-301U print server. I'm actualy a Windows user and set this up and it works fine on the Windows side. My brother in law here is the Mac user and I can't seem to get this going.
I did install Gimp Print Ver 4.2 and the printer is listed as a support device at their website. But, the printer model doesn't appear in the list when I try and add the IP printer. I did try a LaserJet 4l driver and DeskJet 860c - they don't work. In the print queue, the status says "Network host '<IP address of D-Link> is busy; will retry in 30 seconds."
Any ideas? D-Link support was horrible, claiming that they don't support Macs - despite what it says on the box.
Any insights on next steps would be appreciated.
TIA

Thanks, Greg. GutenPrint lists it as a supported printer but as I said, I don't see it. I'll try the other site.
There is some stuff on Macs at teh D-Link site, but its not verry useful. But, re: the queue, name it appears to me that the PS-<servername>-P1 convention comes from a print server with a parallel interface and this is the LPT port name. This is a USB printer and that's why we get the PSC2210 name which I think is the Windows name I gave the Printer. At any rate, the D-Link doc claims that you should leave the queue name blank for a single port server. I beleive that the issue is that this is not a postscript printer which hopefully I can get at the alternate site.
I am curious why this is different on a Mac than in Windows. If the printer works if direct connected, why does the Mac OS need the special drivers to extend the connection through a network? I'm curious as I mooonlight setting up home networks and I don't want to be a "windows only" solution. Oh, and would this work on the Mac if I had selected an Apple print server or wireless router with printer port built in?
Thanks again.

FILES: how do I get rid of EXEC status and set them to open with "none"?

I dropped my laptop and damaged the drive. My computer forensic friend salvaged specific files.
Transfered to a FAT32 drive and then copied to Mac.
Most of files are fine with the exception of some setings files that showed up as Unix executables. The few original files that I have to compare them to, show "Document" as the file "Kind" and the "open with" shows "none" in Get Info
When I look at the contents of the files they look fine. How do I get rid of the EXEC status and set them to open with "none"?
Any help would be greatly appreciated.
These are settings files for a set of .wav samples for an AU drum plug-in.

If you have xcode installed, you might want to find out what the type and creator code for these files should be. Since the files have visited a FAT32 file sytem, you will have lost all resource forks as well as type and creator HFS+ meta data.
So assuming you do have xcode, create a new AU drum plug-in file then in the terminal:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/GetFileInfo newfile</pre>
Then use:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/SetFile -t '(insert type)' -c '(insert creator)' oldfile</pre>
If there's a lot of these you might automate the process using the find command.
Cole

Help getting Solaris-X86 DNS working and set it up a server.

Similar Messages

Maybe you are looking for