Help, I cannot print letters, etc. from new HP printer

Help, I do not know what else to do, was on phone for long time yesterday trying to find a solutiuon. Printer does not work with computer, etc.

Jlin ,
Welcome to the HP Community Forum.
With whom did you speak on the phone?
Did you contact HP Technical Support?
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
========================================================================
What kind of HP Printer do you have -- What is the model number?
Your printer should have its own Website Support Pages -- the instructions below will help you find the Support Website and help you install the printer software.
In general, you should first install the Full Feature Software for the printer onto your computer:
Install Full Feature Software – Printer
The installation of the printer software may allow you to print from the computer to your printer.
If you provide more information, someone may be able to provide suggestions. Please include what you have done thus far to try and resolve the problems you are facing.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Similar Messages

Cannot install any application from new Winows market.

Cannot install any application from new Winows market. I click "Install" and... that's all... nothing more...
P.S. I am on domain network.

Hi and welcome to Apple Discussions.
Don't worry, no special etiquette, we're all friends here
What was the software that you installed that claims to "enhance the speed of your system"? The logical thing to do would be to uninstall the application and hope that it hasn't caused wider ranging problems. The SW, if only halfway reputable, should have come with uninstall instructions. Follow the instructions, reboot and see if your download problem is fixed.
WRT to the slowing down that prompted your (misguided) installation of this SW there are many things that may be the culprit but the most common and easiest to fix is the remaining space on your HD. What size is your HD and how much free space is there? This info can be obtained by selecting your HD and keying Command (Apple) + I (the letter 'eye').
Post back with the SW concerned and the remaining space and we can take it from there.
Good luck,
Adrian

Please help! Cannot access TC backups on new hard drive with Lion!

I know this seems like a generic posting, and believe me that I have searched through countless posts to find the situation most similar to mine. To start, the basic story (I am pretty computer illiterate, so excuse the lack of terminology):
-My computer was working slow, beach balling, etc. two weeks ago - took to Apple Genius Bar for help and they suggested need for new hard drive. I already had a hard drive crash in January, but since I have had a Time Capsule running Time Machine since September 2009, I hooked it right up and restored from a backup with no issue... so I wasn't worried about this. I waited to make sure that I had the most recent backup (and needed to use my computer for law school for a couple days), so I turned it in a day later immediately after a complete incremental backup via TM on my TC.
-Got my computer back from the Apple "depot" with new hard drive and hard drive cable.
-Had an extremely hard time getting my TC to link to my computer and via AppleCare phone help, realized that Apple had given me back my computer with Leopard, and they said that I needed to go back to the store to get a Lion reinstall since the backups had been done in Lion.
-Went back to Apple store, reinstalled Lion... they told me there would be no issue once I got home and hooked up to TC. Connected to TC via ethernet and went through "set up" procedure as if it was new computer - could never get past the "Select the Disk" page. Either it was beach-balling or just sitting there, and I couldn't click continue or anything.
-Called AppleCare again, they said to try it through Migration Assistant instead of Set Up... again, could not connect to TC. They said it was too complicated to do over the phone and sent me back to the store...
-By now, I am on vacation and spent 5, yes FIVE, hours at another store trying to migrate the data to no avail. I obviously don't know everything they tried, but I know they tried installing each operating system since Leopard, going through set up and migration assistant, and doing a disk repair of the TC. None of this worked. Every single time my TC connects and you can see the title of the drive ("Data") and the two separate backups ("emilysmac" was my old computer and "emilysmacbookpro" was the dummy one we tried to make). Emilysmacbookpro was accessible with no data on it, but once we clicked on emilysmac it just said "connecting" forever and never did anything.
Basically:
-300GB of my TC shows that it has been used, so I know something is there.
-I can also pull up the data on another computer, and it shows files dated from September 2009 up to the date I last updated, but they do not look how they used to - they are "Unix Executable" files and cannot open through Time Machine.
I have a really hard time thinking that my TC AND my computer hard drive failed at the same time - which is actually what Apple suggested to me. Is there anything that anyone knows that will help?! I am desperate here! This TC had backups of all my music, pictures and law school work over the past 2.5 years. Any help would be much appreciated!

PS I have also looked through Pondini's site, but I am not sure if I am missing something since I don't totally understand all of it. Thanks again!

Cannot open RAW files from new camera

I downloaded the first batch of photos from my new D7100 camera. I have downloaded the latest version of Camera Raw. But I cannot view the RAW files in Bridge or open them in PS5. PC based.

The latest version of ACR can not be use with old version of Photoshop like CS5. You need to use the latest DNG converter to create DNG versions of your D71000 RAW files. And use the latest ACR version CS5 supports to create RGB image by converting the DNG files you generated for your Camera's RAW files.

Help! Cannot print

I've been using my HP 920C with my iMac for about 2 years. I upgraded to Tiger a few weeks ago. I was out of color ink & after I installed the new cartridge I have been unable to print. It is the correct cartridge, installed correctly. I'm able to print a test page from the printer utility with no problems. When I try to print from Saffari, Appleworks, iCal, or anything else, the print button is its usual glowing blue, but nothing happens (the screen stays exactly the same) when I click on print. In fact, nothing happens when I click the Save to pdf or Preview buttons either. The only buttons that do anything are the "supplies" button (which opens the order page in Safari) and "cancel". Any advice?

Time to bring out the generic fixes...
Try one at a time and restart after each.
Delete and re-ADD the printer(s) in Printer Setup.
Repair permissions (Disk Utility).
Delete Print Prefs - search for (File>Find) files that start with com.apple.print and delete them all and reboot.
Reset Printing System (new in Tiger) - In Printer Setup, click this menu item found just above Quit Printer Setup.
If there is a downloadable Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD.
(last, desparation step - reinstall OS X using the Archive & Install option in the installer.)
Good luck.

Help, I cannot print a PDF file to my Hp Photosmart D110 series. It sits on the queue forever.

I am trying to print files I purchased and it will not print. I have the Photosmart All in One D110 web enabled printer and a Windows 7 HP computer.

Hi - Try following the steps in this document.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Help desk cannot assign retention policies to new mailboxes

I am running Exchange 2010 SP1. I would like to give my help desk the ability to create new mailboxes. When a new mailbox is created, we select the option to assign a Retention policy to it. I added the help desk members to the "Recipient
Management" group. They can now create new mailboxes but they get an access denied error when they select a retention policy to be assigned to it. As a member of the "Organization Management" group, I am able to assign retention policies to new
mailboxes.
With the RBAC editor, I created a custom management role group called "Mailbox Management" based on the "Recipient Management" group and added the "Retention Management" role to the group. I believe this will give them the permissions to apply retention
policies to new mailboxes but it also gives them the permissions to create/modify/delete retention policies themselves. I only want to give them the rights to add mailboxes to retention policies.
I assume I need to create a custom management role and assign this new role to my new management role group but can someone tell me the minimum role entries I need for my help desk to be able to assign rentention policies during the mailbox creation
wizard process?
Steve

Hi Steve,
Due to you post the issue in a wrong type, and we changed the type to give you a suggestion.
Please refer to below information:
http://technet.microsoft.com/en-us/library/dd638205.aspx
The permissions required to configure messaging policy and compliance vary depending on the procedure being performed or the cmdlet you want to run. For more information about messaging policy and compliance, see
Messaging Policy and Compliance, refer to above article you could find out what permissions you need to perform the procedure or run the cmdlet, then you coudl create a roleassignment
for the customized role group.
Regards!
Gavin
TechNet Community Support

Need help with syncing ipod; managing iTunes from new laptop

I have a new laptop with Win 8. I'm able to open my itune library, but not able to sync with my ipod nano. I would prefer to manage my itunes from my laptop vs our old computer, as this computer is becoming obsolete. Does anyone know how to do this?

What problem are you having?

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

HT4796 recently purchaced a macbook pro and cannot transfer music,contacts,notes etc. from my iphone 4 onto my new macbook pro!! please help

Im a ex windows vista user, who evently became fed up and converted to a macbook pro. i just purchesed the macbook pro yesterday and have been trying to transfer all my music, contacts, notes, apps, etc. from my iphone 4 onto my new macbook pro. nothing seem to be working without it trying to erase all my info off of my iphone 4. I didnt think this would be a issue where they are both apple devices, but im now starting to regret the decision to purchace this macbook pro. please help me so i dont loose all my info trying to sync both devices. thanks for you help and advice

Welcome to the Apple Support Communities
You can only sync the iPhone with one Mac or PC, so your Mac is asking you to erase the device because you synced it with another Mac or PC. To avoid this, I recommend you to copy the "iTunes" folder of your old Mac or PC (in Music folder) to the Music folder of your Mac, so you'll have the same data on your Mac as the data you had on the PC.
To transfer contacts, notes, etc., I recommend iCloud > http://www.apple.com/icloud/setup/

Cannot print borderless printing from illustrator - prints fine from photoshop. I've updated canon drivers but didn't help.

After buying a new imac and upgrading to lion, then upgrading to illustrator I cannot print borderless on my canon printer. It prints borderless fine from photoshop. I have installed the new drivers from canon through apple but that didn't help. It shows borderless in the print window but continues to leave a border when printing. Any suggestions?

Hi there misterglenn,
I would recommend taking a look at the troubleshooting steps for printer issues found in the article below.
Troubleshooting printer issues in OS X
-Griff W.

Uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded

uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded@

For starters, what exactly do you mean by "cannot print"?
Are you getting an error message? Are you trying to print from within Reader or are you opening these in the browser? What version of Reader. Even though it's a new printer, the drivers that came with it (or the ones that were already on your computer) may be old so, have you downloaded the most recent drivers from the Brother site?

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
1. Upgrade to PSE 10 or 11.
2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
Mac:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

I can't access my itunes store and cannot sync my songs etc from iTunes to my iPad3. HELP please.

i can't access my itunes store and cannot sync my songs etc from iTunes to my iPad3. HELP please.

Need more information. What happens when you try each of those actions? Error messages?
Can you connec to the internet with oher apps?

Help, I cannot print letters, etc. from new HP printer

Similar Messages

Maybe you are looking for