HELP.  IPOD not restoring!

Hi any help would be ever so appreciated.
Saturday on way round supermarket my Ipod stalled and couldn't turn on or off, and basically crashed.
I have tried my best to troubleshoot it to work again.
Fistly I have installed iTunes 7.2
Then I reset the Ipod (1st Gen Nano) by holding "Menu" and "Middle".
I plugged it in to iTunes and got message; "itunes has detected an ipod tat may be corrupted. You may need to restore the ipod before it ca be used with iTunes. You may also try to disconnecting and reconnecting the ipod".
So I click restore on the iTunes options and get the message "there was a problem downloading the ipod sofware for "ipod" the requested resource was not found.
The last message only appeared recently - before that I would get the ipod restored to factory setting and then plug it in and still get told the ipod was corrupt!
Please help me - my life is emptier without my trusty nano!

The message you're getting means that iTunes cannot find the iPod to restore it. You may have to re-register some digital drivers on the computer.
Try this article: http://docs.info.apple.com/article.html?artnum=304996
This article re-registers 10 digital drivers that iTunes and the iPod use, and fixes multiple errors.
If that doesn't work, try unplugging all other USB interference you may have plugged in (USB printer, scanner, external hard drive, etc). If that doesn't work, you may want to try a selective startup (http://docs.info.apple.com/article.html?artnum=302538).

Similar Messages

  • Please help ipod not restoring

    Hi everyone, ive been having some problems with my ipod lately. The 'sync to itunes' screen is showing on my ipod and i forced it into recovery mode in order to restore it. This worked and then my ipod was synced perfectly.
    After this i used itunes to update some of my apps and then tried to re-sync my ipod. The apps were synced but all of my music/videos/photos etc were wiped off my ipod. So i tried to sync it once again and it went back to the 'sync to ipod' screen.
    Again my only option was to restore it, but now when i try this procedure i just get an 'error 14' message and it doesnt restore.
    Any ideas?

    OK - after hours and hours of fidling I have found a [partial] solution.
    After posting above I tried restoring my iPod with the Firewall turned off. This changed the Error from (6) to (14) but otherwise the same symptoms.
    I used a different computer (Windows XP Laptop) and iTunes to recover my iPod. This was a clean install of iTunes on the laptop. I took the OS 3.0 firmware out of the App Settings folder on my Vista PC and saved onto the laptop. On the laptop I shift-clicked the restore button when iTunes recognised the iPod in recovery mode and chose the OS 3.0 firmware.
    Once recovered I completely uninstalled iTunes, Bonjour, Quicktime and Apple Mobile Device Service and used CCleaner to remove rougue registry entries. I also manually moved all the Apple/Apple Computer and iTunes/iPod folders in my Documents & Settings and Local Settings etc.
    I then (with great trepidation) plugged my iPod into my Vista PC. I deleted the other iTunes library and its currently syncing with my music library. Fingers crossed the Sync completes.
    I hope this helps someone else and I hope that Apple actually takes the crash reports and does something with them - I think its pretty poor that you can't log a support case and that the telephone helpline told me I needed to replace the iPod when there is clearly not a hardware problem.
    Come on Apple - sort out your Windows/Vista support!

  • HELP - iPod not readable

    Problem: When I connect iPod to my laptop I get the message 'iPod not readble - The iPod needs to be reformatted for use on your PC. Click on the update button below to run the iPod updater application that will allow you to reformat or restore your iPod'.
    When I got this message the first time I clicked on the update button that can up, but it only confirmed that the software on my iPod was up to date. Confused, I decided to do a restore in the hope that that would solve the problem. Unfortunately that didn't help and I've continued to get the 'iPod not readable' message whenever I connect my iPod to my laptop.
    When I go into My Computer it no longer recognises iPod and I only get a Removable Disk showing up.
    I've downloaded and installed the most up to date versions of iPod updater and iTunes but that hasn't helped. I've tried repairing iTunes, uninstalling and reinstalling iTunes and a whole lot of other things.
    I saw on another thread that reformating the disk in iPod has worked for someone else, but that hasn't helped either. I've tried in both disk and normal modes.
    I've had iPod in diagnostic mode and it seems that iPod itself is OK.
    I'm not sure where to go from here but everytime I connect iPod I get an 'Autoplay' box come up and then a message that 'iPod not readable'. Has anyone got any suggestions that I can try to get iPod working again?
    Thanks<<br>
    Dell Inspiron 1150 Laptop   Windows XP   U2 Special Edition iPod (4G 20GB)

    I have dual USB 2.0 ports on my laptop, and have tried them both. I don't have a FireWire port though.
    I did try my iPod on my work computer (which doesn't have iTunes on it) mainly in an effort to format the disk in Disk Utility that I was having trouble formatting on my laptop. Interestingly iPod also showed up as a Removable Disk on my work desktop as well. I would have thought that even without iTunes installed it still would have recognised iPod.
    I've read on a couple of threads elsewhere that if you're having problems with iPod on a PC that you should try connecting it to a Mac (or vice versa). So I'm going to go and see the (hopefully) friendly people at my local computer store and see if they will let me connect my iPod to a Mac instore. Failing that I'm running out of ideas.
    Anything else you can think of?
    Dell Inspiron 1150 Laptop   Windows XP   U2 Special Edition iPod (4G 20GB)

  • Help - Can not restore 3GS 3.0.1

    Help! I can not restore my brand new iPhone 3GS. I have NOT upgraded to 3.1 and won't until I know it's stable, but when I try to restore to 3.0.1 it tells me "Verifying restore with Apple" and then "iPhone is not eligible for restore". Again, I am NOT trying to downgrade, I have not installed 3.1 and in fact have not even downloaded 3.1 I'm just trying to restore 3.0.1 on top of 3.0.1.

    I don't know whether or not it's working for "most people", but I, too, am trying to figure out a way to "down"grade to 3.0. Ever since I updated to 3.1, the 3G connection that ALWAYS worked in my usual hangout spots, now don't work half the time. Sometimes, if I switch to Edge and then back to 3G, things work again...sometimes they don't.
    I am thinking of taking the phone to one of those Genius dudes at the local Apple store this weekend - do you guys think that they'll restore it to 3.01 for me? I mean, how do I even "show" them the problem if it's location dependent and may not even be a problem at the store?
    I see many complaints about battery issues, wifi issues, hangs, etc. with 3.1, but I don't know whether Apple is aware of this?

  • Please help - Ipod not recongised by itunes

    I recently attempted deleting a couple of songs from my ipid which resulted in losing all 20G of files. Since then my Ipod is not recognised by my PC. I have completed all support reccomendatsions and returned the IPOD which was in tuen returned to me by Apple indicating there was no issue with it. They will not however provide any further support. I am going nmad with it.
    The ipod appears in windows as removable media but does not show in Itunes. I have tried it on other machines with no result. Does anyone have any suggetsions???

    Don't know exactly what you've tried. Here are some starting places
    iPod Not Recognized and Windows Device Manager Is Empty
    iPod Service Error Or Windows Recognizes iPod But iTunes Does Not

  • Help: ipod not recognized by computer(s)

    Hi,
    my ipod (4G) has had problems: sometimes skipping songs. etc. So I decided to reset it. But the problem: It isn't seen by the PC (Windows XP) at the explorer level (same with iTunes), not by
    the disk management, not by the ipod update (which dies with "internal error"). It's only seen at USB level. I installed a new updater, I changed USB, I tried 3 different computers.
    Meanwhile the ipod freezes ever computer I connect. So no chkdisk, rstore or whatever is suggested.
    What really annoys me: This is the 4th time with the fourth ipod this happens (It was changed 3 times by support - oncenow guarantee is lost). There must be some misconstruction within the ipod in general.
    Any ideas ?
    Regards,
    Christian

    Hi,
    I've solved the problem. The problems occurs if you disconnect the ipod to often "unsafe". Then some files corrupt on the disc. Solution: restore ! But how, when PC is frozen.
    First:
    Since nobody can give me help I tried and tried and then I noticed, that not the PC is frozen, but everything around the explorer. It has to do with explorer !
    Second:
    After a long while, the ipod can be seen as removable disk.
    Nothing ccould be done with it (explorer still frozen, no chance to something with other windows-tools).
    Third:
    I read something about "external" tools for removable usb disks. I installed "HP USB Disk Storage Format Tool", which has no "connection" to the explorer. This tool has seen the ipod as removable disk and could format it.
    Fourth:
    After that the normal restore was possible and everything is fine now.
    Christian

  • HELP ipod not recognised on PC

    Help My Ipod does not show up on my PC. It does not dingdong when you plug it in. I have tried another ipod I have got ang that still picks up on the PC. I have tried restoring the Ipod, I have reinstalled Itunes, and I have checked the drivers on the PC and it does not show up there either???
    can you help please. Shaun

    I tried a few things suggested and nothing worked. I always get the message "USB Device Not Recognized". And no matter what I do!
    During the process I also found out that one of my thumb drives has the same issue. I tried other USB ports and the same. It is just these two devices that have this issue. I recently did a Windows update but don't know if that can have something to do with it. Before they both worked perfectly fine. I tried the thumb drive on another PC and it worked fine. So what ever is going on is very strange.
    Also, while researching this board I found many others who had the same issue. There were very many views but very few replies, and if then from people like me. The few suggestions that were out there did not fix the issue. Sadly!
    The question that I have is, "what is Apple doing to help?"

  • Ipod NOT restoring properly or being recognized in itunes!!!

    so yesterday i was trying to (manually)update my ipod and then it somehow got messed up so i decided to just restore it. but when i went to restore it, after it 'restored' it normally says on the ipod to plug it into a wall outlet for the frim wire stuff or whatever but it never said that and it just went to the apple screen as if i had just reset it and then it automatically went into the 'do not disconnect' screen but it still wasn't showing up in itunes but it was showing up in my computer, so then i kept trying to restore it and still it never showed the 'plug into a wall' picture or anything until i finally just unplugged it once it was done restoring and just took it to be plugged in but that still didn't work. and i've tried uninstalling itunes and the updater but it doesn't uninstall, it's always still there and so i tried reinstalling itunes and the updaters but it doesn't seem to make any difference. help please???

    no because normally, after the restore, the ipod screen shows a picture of you having to plug it in, and it never did, it simply showed the 'apple' picture (as if i reset my ipod) and then it automatically connects to my pc again and says 'do not disconnect'. and if i did quickly unplug it from my pc after completing the restore, and went to plug it in with my ac adapter thing, it wouldn't make a difference because it still shows the 'apple' picture as if i simply reset it.

  • HELP: ipod not being recognized

    I am using Windows XP and I recently downloaded the new iTunes 7. Now my ipod is not being recogized. When i plug it in, it charges, but a little icon appears on the bottom saying..."One of the USB devices attached to this computer has malfunctioned, and Windows does not recogize it." Below that is a list of "Unused ports" but the one that is bolded, and I'm being told is being used, is an "Unknown Device."
    Any help would be greatly appreciated. Thanks!

    I have no idea what Dell or Apple told you, so we'll start from the beginning.
    First read this: http://docs.info.apple.com/article.html?artnum=305136 I am assuming since you talked to Dell your USB Driver is up-to-date. Reload your USB Driver anyway follwing the steps in this article.
    Next disconnect any USB Device you have connected other than your keyboard and mouse.
    Connect your iPod to a USB port on the rear of your computer and see if your computer can recognize it. If it can, right click on the iPod and change the driver letter to a higher letter (M or P) and then reformat your iPod (FAT32 format).
    If iTunes can now see your iPod, Restore it.

  • HELP - IPOD NOT READING ITUNES

    I have a ton of songs on my ITUNES, yet when i plug my ipod in, it is not updating the songs, it will only take 64 songs. HELP PLEASE!!! i am thinking of getting the new video ipod, but don't want to waste money if this stuff is going to happen. How do i get my songs back on my ipod??

    Welcome to Apple Discussions!
    Make sure everything is updated...
    iPod Updater Download Page
    iTunes Download Page
    Also, try a restore...
    Restoring Your iPod
    Finally, see if removing the song it stops on helps.
    btabz

  • HELP - iPOD NOT RECOGNISED (CORRUPTED)

    My 5th gen. iPod Video is not recognised when I plug it into my computer. The cable and eveything else is fine, I have reinstalled iTunes, restarted etc etc and no joy. I cannot get into the bit to restore to factory settings. Can anyone help me do this? Or any other suggestions? Thank you xx

    Thought it was fixed =[

  • IPod not  restoring, Argh!

    Ok, im trying to install a iPod Nano (mini stlye) onto my computer. Im using Windows Operating system.
    When i connect the ipod, itunes is telling me that i have to restore the ipod as it is in recovery mode.
    After clicking on the restore button, itunes then tells me the following:
    "There was a problem downloading the iPod software for the iPod "iPod". The requested resource was not found."
    How am i meant to restore the ipod if it cannot find the software to do so?
    Why can't it find this software?
    Help, please.
    Message was edited by: wOw!

    Hi wOw!
    Try the solution from this Knowledge Base article:
    What to do if iPod can't be updated because the firmware file was corrupt or not found
    Also, any help if you try the suggestions from my post here?
    http://discussions.apple.com/thread.jspa?messageID=4741036&#4741036
    -Kylene

  • Please help ipod not formatting

    please help
    going on long trip, want to use ipod for first time
    when insert ipod cd, asks to connnect ipod, recognizes ipod
    attached using USB2.0, says needs format, click on format, just sits there with blue bar scrolling left to right while saying waiting for ipod, and does not let you click on back button format button, or cancel button
    so close window and window behing which couldn't see before says enter serial #, do that goes through rest of installation, then if plug in ipod, windows recognizes it but itunes doesn't, also when using ipod updater says plug in ipod so i do but never allows me to click update or restore
    problems probably all related to formatting issue
    have tried several solutions suggested on web but none work
    so disappointed
    appreciate any help

    The best way is to restore the iPod Updater (latest version please)instead of formatting, unless your iPod could not get recongized by your PC. I will try to put it in Disk Mode (press "Select"+"Play" keys) and connect with your PC, open your iTunes and hope that you can see your iPod's icon in it, then open the iPod updater and do a restore.
    If you still cant solve your probelm, someone in this forum suggested to do a chkdsk.
    I got disappointed with the XP, I finally managed to format my iPod using 3rd party software i.e. "Partition Magic" and got it fixed up

  • Help Ipod Not being read by itunes but computer reads it

    Hey I need help I have used my ipod for months about 4 recently i rebooted my pc and now every time i connect my ipod it shows its connected by the computer and It shows me a message sayin that i have to update my ipod which makes no sence because both itunes,update and ipod are up 2 dat Please Help

    Start with this article and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    Patrick

  • Help ipod not showing up in itunes...ive already done everything it says to

    so i downloaded some new songs and then started to update my ipod and it said there was an error trying to write to the disk so i thought one of the songs may have been bad so i deleted them and tried to update it again and then my ipod went wompy and showed the folder with the exlmation point so i reset my ipod and it now wont show up in itunes to be able to update it it does show up in windows....i went to the support page and followed all the steps that is for ipod shows up in windowns but not in itunes...but it still wont show up...ive read all the post regarding this topic and none of it seems to help
    any suggestions?
    any way to find out if its my ipod or my computer?
    i am going to hook it to my frinds computer and see if it shows up there but have yet to do so
    thanks,
    melissa

    Hi,
    TO check if its your computer see if you have service pack 2 (right click on my computer and go to properties and click on the gneral tab) if not it can be downloaded at microsoft.com. If you have SP2, check it on someone elses computer who has the software installed. If you dont have anyone close to you who has a computer with the software installed check out the apple stores they do basic trouble shooting the store (you have to make a reservation at apple.com/retail, or you can make a walk in appointment). If you dont you can call apple support 1-800-275-2273. If you dont want to call support you can send your ipod in for repair at http://depot.info.apple.com/ipod
    Good Luck
    HW

Maybe you are looking for

  • ODSI to Invoke an A sync Web service

    We have a 2-Tier application based on Oracle 11g db and PowerBuilder 10. Does the follwoing practice can take place? : 1.call an ODSI Program (Wraped as a service) from Power Builder 2.ODSI will collect the data from the db and send it to a SOAP end

  • Adobe media encoder hangs using macbook pro yosemitie & CS6

    i cannot crunch a premiere pro project using adobe media encoder....the media encoder starts crunching normally but hangs at random .... i get the following clue in the activity monitor....PProheadless (not responding) also unable to create ISO image

  • Pausing a sequence of text and images

    Ok, I have 6 tabs down the side of the main screen where users can hover over to select which tab to view. All they do is hover to select the tab - no clicking. The sequence changes from tab to tab sequentially (if a tab is selected then the sequence

  • How can i see a breakdown of the MONEY i have spent on apps?

    I have followed steps through itunes on my PC by clicking my name, purchased but this shows every app but not a breakdown of their individual costs? I want to see in terms of money what app cost me what? Thanks,

  • Is it possible to Email document into KM

    We are trying to streamline a manual process where a user has to log into our Portal and deposit files in specific folders for use by other users. Is there a way to email a document directly into a KM Folder?  Thanks for any ideas on this.