Help me by design the required thing..

Hi,
Please any one give me idea for making the operation. The attached
VI shows the check box(regulated) in front panel with some text boxes
below. So, now i want to make when the check box is clicked(on or
regulated) i want to display last two text boxes with front labels and
when it unchecked(off or unregulated) i want display first six text
boxes with front labels. So, when the user try to enter alphabets in
that textboxes it should not take those and give error message like
only numbers are allowed. Attachment is there and please any one can
make that for me. i am really new these lab view and looking for big
help .(Starting from burst duty ---> current limit)
             Please help me.
please help me i waste 3 days for this and i did not find any way. Looking for big help.
Solved!
Go to Solution.
Attachments:
Basic Serial Write and Read.vi ‏31 KB

An easier way to handle the hide/unhide is to simply place your controls on a Tab Control (which you can paint transparent).
Then it's silly easy.
A simple solution is as attached.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV
Attachments:
Basic Serial Write and Read.vi ‏32 KB

Similar Messages

  • What are the required things to do the debug?

    hi Experts,
    What are the required things to do the debug?
    thanks in advance
    sekhar

    Hi,
    There are different ways to go in debugging mode.
    One way is to go to the transaction and put /h + enter in the top blank space.
    The other way is to but a breakpoint in your program.After you execute the program,it will stop at the breakpoint and go into debugging mode.
    The thirdway is to write break-point in the code at a specific point.On execution it will stop at that point.
    A fourth way is to write break (your user id).It will stop only for you and then you can debug it.
    Hope it was useful.
    Thanks,
    Sandeep.

  • After resizing a disc partition using disk utilities, I can no longer boot windows. HELP! what is the best thing that I can do to fix this

    Bare with me as Im no computer genius but ... This afternoon I wanted to create more disc space on my Windows partition as I am using CAD software and wanted to free up as much space as possible. So, I went into disk utility and reduced the size of the Mac partition, then clicked apply.
    When I came to reboot the computer to use windows the windows OS, the option to use windows was no longer there.
    After looking at some online forums, I've found that most people suggest reformatting the hard drive and re-installing mac OS and also windows from back up data.
    Is there no easier way for which I will not lose any data? Please help! I really need to use Windows ASAP!

    The only apps I know of that can backup a Windows partition and or resize a windows parttition on a Mac so you don't have to go through the wipeing out, resizing and reinstall is WinClone for backing it up and WinTune (I think that is the name) for resizing a Windows partition on a Mac.
    Once you create a Windows partition, install Windows in that partition, you can't fool around with any partition on your drive with either Windows Disk Management or OS X Disk Utility and expect Windows to boot.
    The only thing you can try is to run Boot Camp Assistant.app again and remove the Windows partition and then run it again to create a larger partition and then reinstall Windows. Once you remove the windows partition put all the space back into the OS X partition and start fresh.

  • Help needed on designing the structure of a flash game

    Hi,
    I am studying the codes from http://www.emanueleferonato.com/2009/01/16/designing-the-structure-of-a-flash-game-as3-ver sion-part-3/. What I don't get is at level_selection.as. Where does main_menu_button come from? I can't find where it has been created. I only see main_menu, not main_menu_button.
    Please help.

    The codes in level_selection.as looks like this, but the problem is I cannot find main_menu_button anywhere, except for main_menu.
    package {
        import flash.display.Sprite;
        import flash.events.MouseEvent;
        import flash.display.SimpleButton;
        public class level_selection extends Sprite {
            public var main_class:the_game;
            private var level_thumb:level_thumbnail;
            public function level_selection(passed_class:the_game) {
                main_class = passed_class;
                for (var i:int = 1; i<=5; i++) {
                    level_thumb = new level_thumbnail(i,main_class);
                    addChild(level_thumb);
                main_menu_button.addEventListener(MouseEvent.CLICK, on_main_menu_button_clicked);
            public function on_main_menu_button_clicked(event:MouseEvent) {
                main_class.show_splash();

  • Plz help me to design the system......Its very urgent

    Hi all members
    I have a problem and i am not able to start with the solution of this
    if all of u can help me to move with the solution of this problem
    I have to send the Java interfaces, and a brief write-up with assumptions and class-design.
    Challenge
    Your challenge is to begin development of a back-end system for the Galactic Census.
    You will be designing and implementing a Java API;
    you will not be building the user interface.
    The specifications have been written on a stack of white index cards.
    Each card has a title at the top and a few sentences describing what is desired.
    Your customer, the Galactic Government,
    has also communicated to you some idea of the value of each card.
    Card Title Description Value
    Person Data Entry Several persons may be entered into the system.
    Each person has a full name, date of birth, planet of residence,
    local address (on that planet), and annual income.
    Being able to enter this data is critical to the Census.
    Person Data Report All the person data in the system may be retrieved at once.
    The data should be grouped by planet,
    and ordered alphabetically by full name within each planet.
    This report will be needed in the future,
    but is less immediately valuable than the various statistics.
    Statistic: Galactic Total The total number of persons in the Galaxy may be retrieved
    from the system. This statistic is one of the primary goals of the Census.
    Statistic: Planetary Total The total number of persons on any given planet
    may be retrieved from the system.
    This statistic is one of the primary goals of the Census.
    Statistic: Galactic Per Capita Income The average income per person in the
    Galaxy may be retrieved from the system.
    This statistic is required by Government economists.
    Statistic: Planetary Per Capita Income The average income per person on
    any given planet may be retrieved from the system.
    Some university researchers have asked for this statistic.
    plz help me to start with this problem
    Thanks

    plz help me to start with this problemRead the problem description and make a class design based on which class needs to do what. Take these "white cards" as basis. Think about the services your system has to offer. Make interfaces for those.

  • Help! Safari is the only thing left working... why?

    I had problems online from the middle of today (Sunday 13th January) - first my network connection to an online virtual world where I play went down to nearly 0, then after that I couldn't log on at all. Later I decided to catch up with my email. Apple Mail in both accounts I tried simply could not send or receive mail (the little whirly disc was eventually replaced with a ! in a triangle). Now I have come to use iTunes and find I cannot access the Music Store.
    I would suspect my router, except that Safari has continued to work normally the whole while in both accounts, and just now I downloaded some software at a speed of 256kbps which is healthy.
    I have restarted the machine and everything else is fine. What has gone wrong with my connection, and why is Safari still working ok?
    My ISP is Tiscali (I would suspect them too, but they would be unlikely to bork Mail and iTunes while leaving Safari running ok.). All lights on the Netgear router are lit normally and Network Preferences reports I am connected to the Internet ok via Ethernet.
    I am in a fairly desperate situation here, though Safari is a lifeline - any help would be appreciated.

    I did the router power down thing (modem and router are one, not separate), hasn't made any difference.
    It's time-of-day specific - it was ok again yesterday (Sunday) after 10 PM and has been fine today up until around 5 PM. This makes it seem like ISP "traffic management" but that should not affect Mail or iTunes?
    If it's ISP, is there anyone here who knows of the best measures to take, to get bandwidth restored? (I havent been notified at all under any Fair Usage Policy.)
    Finally, what am I looking for in Console? I'm a total newbie with that kind of thing. Most of the lines just say...
    Looking for devices matching vendor ID=1193 and product ID=8718
    which doesn't mean anything to me at all.

  • My songs have all been duplicated.  All my music is on external hard drive and I want it to stay there.  Am using a new computer and thought I'd done all the required things for my library to show on iTunes 11.

    I'm using a new computer.  All my music is on an external hard drive and I want it to stay there.  Before installing iTunes on the new computer, I followed turingtest2's instructions as to the layout of all the iTunes folders (Itunes folder, Itunes Media, Music, etc...).  I also followed his instructions as to get all my music in iTunes on the new computer (but keeping all the media on the external drive).  Now my songs are all duplicated in my library (I normally have about 15,000 of them). They all play when I click onto them.  Also, I've lost all my playlists, and all the songs in the library are now ticked. I've already spent hours trying to sort this out, but can't seem to find a solution.  Help please!

    Hi turingtest2,
    Thank you for replying.  I've been looking at your posts about setting up iTunes using an external drive.  A bit of background info.  My old computer broke down, so I got a new one from work.  I've always kept my music files on my external drive (I have around 170GB of music).  I didn't follow the suggestions in the "migrate iTunes library" post because my old computer died on me.  However, I've looked at your posts about lay out of the iTunes folders.  Before connecting to iTunes on the new computer, I had reorganized my iTunes folder on my E: external drive, and created an iTunes folder which contains an iTunes Media subfolder.  The music files are in a Music folder, which is in the iTunes Media folder.  I've also put the following files in my iTunes folder: iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, iTunes Music Library.xml, as well as sentinel.  I then followed the advice you gave bmw99 on 2 Nov 2013 at 9.58 (sorry, can't copy the exact answer). 
    Just to clarify:  I'd like to keep all my music media on the E: external hard drive (the computer hard drive is too small), and I'm aware i might never have my playlists back, and that all the songs in my library might be ticked.  However, I don't want my library to be duplicated. 
    I'm at work at the moment, but will be back home in about 10 hours, so I can be more specific about folders / files names. 
    I'm glad you picked up my message and greatly appreciate your help.
    Patrice

  • Help needed in designing the Web Service Interface

    Hi,
    In have a scenario where a client will be sending an XML file , which is a SOAP message to a webservice. I would like to know what the input datatype for this interface would be?
    Is the following correct?
    interface MyWebService{
    public String recieveMessage(String aSOAPMessage);
    Also once I get the SOAP message what is the best way to parse or iterate through its contents.
    Any pointers or examples would be highly appreciated.
    Thanks
    Murtuza

    Hi,
    In have a scenario where a client will be sending an XML file , which is a SOAP message to a webservice. I would like to know what the input datatype for this interface would be?
    Is the following correct?
    interface MyWebService{
    public String recieveMessage(String aSOAPMessage);
    Also once I get the SOAP message what is the best way to parse or iterate through its contents.
    Any pointers or examples would be highly appreciated.
    Thanks
    Murtuza

  • Problem in designing the complex report for the client requirement

    Post Author: venkateshvarakala
    CA Forum: General
    Hi,
    I have problem in designing the report (Crystal Report 9.0) with multiple groups wih a sub report in each group with a a group header and footer with a
    detail section in each report.
    My requirement is as follows.1) Xxxx-sub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter2) Yyyyysub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter3) Zzzzzsub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter4)ABCdsub reportwill have one header one footer in group headers grouper on two prameters, My requirement demands customised detail section i.e.static conetent followed by detail section and a static conetnt(which should not repeat with child table records,should come only once with the a record and
    s) and detail section.
    example:
    main table of the sub report 4 has records m1,m2,m3,m4... and child table has
    m1c1m,m1c2,m1c3,m1c4,m2c1,m2c2,m2c3,m2c4,m3c1,m3c2,m3c3,m3c4,m4c1,m4c2,m4c3,m4c4...
    The staic content should come only with m1,m2,m3,m4 not with m1c1,m1c2....like this I need in two places in the same report which may have 500 recors printed in single report.
    all the above section should be suppressable with a condition including the top 3 reports.
    I am able to get the top 3 reports as per the requirement but my forth sub report is getting displayed after each sub-group 1,2,3 which is not happening with
    1,2,3. Only 4th set is repeating with 1,2,3.
    THis report is attached with 6 datasets.
    I linked the main report main table with 1,2,3 (main Table) report filling table but when I am trying to link the 4th table main table  I am able to link but
    I am not getting the result on the report.All the dataset has the one common column. sub report 1,2,3 are filled with common datasets with condition suppressing where as 4th report is filled with
    different results .
    1) My question is why the 4 the report is report is repeating with 1,2,3 why 1,2,3 are coming as expected.2) Is it possible to create
    Please help me in designing the report as per the requiremnt and suggest me if I need any design modifictions.
    Your suggestions and inputs are highy appreciated.Thanks for sparing time in going through my problem and I will be grateful if give solution and share if you have similar experiences.
    Thanks
    Venkatesh Varakala.

    If you create a multiprovider with the two ODS you won’t have this problem.
    Hope it helps.
    Regards.

  • Solaris: The System does not have the required swap space

    I'm trying to install Oracle onto Solaris 9. The installation check fails with the error
    The System does not have the required swap space.
    I've read the install Guide I get the following when I do the memory checks
    bash-2.05# /usr/sbin/prtconf | grep "Memory size"
    Memory size: 1024 Megabytes
    bash-2.05# /usr/sbin/swap -s
    total: 767688k bytes allocated + 117080k reserved = 884768k used, 379040k available
    The install guide doesn't say how to increase the Swap Space. I would like to increase the Swap Space just for the duration of the installation. From the install guide I'll need a Swap Space of 1.5 times the Ram on the machine so I'll need 1.5GB Swap Space. Can someone help me out with the required syntax to increase the Swap File Size?

    Found something on the web that did the trick. Create a few files and then add to your swap.. In case it's of interest to anyone else here's what I had to do
    swap -l (lists files in swap)
    mkdir /tmp/swap/ (create dir for file to add to swap)
    mkfile tmp/swap/swap11 (create file for swap)
    swap -a tmp/swap/swap11 (add file to swap)
    swap -l (check files in swap)

  • Someone please help me Design the database of bill of materials

    I want to design the database of bill of materials which contain item and amount.
    So the amount of child will depend on amount of parent in term of ratio. For example
    A(1)               A(2)
    |         ---->     |
    B(2)               B(4)
    My problem is when i try to add the parent and child . Let A is the parent of B , If i try to add A to be the child of C
    I want B to come along with A as well. For example
    A                       C
    |     C  --->        |           For this I have to store the relation of all item in  my list to check that this item have a child or not if yes
    B                             A              The child must come along with its parent , What the Er-diagram
    should be for all of my requirement?
                                    |
                                    B

    >I want B to come along with A as well. For example
    You can do that, but that is not automatic. You need to do some programming.
    It is better to use hierarchyid representation of the tree over traditional FK referencing.
    Tree using hierarchyid example:
    http://www.sqlusa.com/bestpractices2008/orgchart/
    BOL: "Model Your Data Hierarchies With SQL Server 2008
    .....The manufacturing system behind automobiles; the organization of a country into states, counties, cities, and postal codes; the description of a home entertainment system—what do these things have in common? The simple answer is that each
    describes a hierarchy.
    SQL Server 2008 supports a new data type, HierarchyID, that helps solve some of the problems in modeling and querying hier­archical information. I will introduce you to this data type by discussing a pattern commonly used in manufacturing
    known as bill of materials (BOM), or bills. Starting with a brief discussion of BOMs, I will illustrate how this kind of data can be modeled. I will also present an implementation of this model in SQL Server 2005. Then I will show you how the HierarchyID data
    type can be used to implement the model in SQL Server 2008.
    Hierarchical Data
    Automobiles are amalgamations of many components, such as engines, drivetrains, electronics, and steering. In the United States, our geographic territories are divided into states and are then sub-divided into jurisdictions called counties.
    Counties are then further subdivided in different ways by different agencies. The United States Census Bureau, for example, composes them from Census Tract Areas. The U.S. Postal Service routes mail delivery by Zone Improvement Plan (ZIP) codes. Geographic
    information systems (GIS) may aggregate census tracts and ZIP codes together to provide users with a familiar spatial reference for an area.
    A recent trip to a local electronics store to evaluate a replacement home entertainment system pointed to a similar sort of hierarchical system—all the combinations of possible components and options left my head spinning! I wondered
    how such systems could be modeled and implemented in a database system.
    The relationship between an automobile and its engine represents a hierarchy: the automobile contains the engine. The relationship is the same for the drivetrain, the electronics, and the steering. The relationship is containment. A
    similar hierarchy can be observed in the relationship between the different groupings of geographic or census data.
    Hierarchies exist everywhere, yet implementing them in the context of a relational database frequently proves to be a challenge. A typical approach is to represent the hierarchy using a parent/child relationship with one or more tables.
    While this approach certainly works in many cases, it has a few shortcomings. Such solutions must carefully consider how the referential integrity will be maintained. And while querying the depth and breadth of such tables was considerably simplified in SQL
    Server 2005 with the introduction of recursive common table expressions, writing queries against these types of tables can still be problematic when joins against many tables are required.
    A Bill of Materials Problem
    A few years ago I was working on a system being developed by a manufacturing company to help their dealers specify the components needed to build center-pivot irrigation systems. The software produced a list of components needed to custom-build
    the desired pivot (the totality of a center-pivot irrigation system is simply referred to as a pivot within the industry). The required components were determined based on geography, soil type, and the intended crops planted in the areas to be covered as well
    as the hydrologic and structural considerations of the device itself.
    Underpinning the solution would be a SQL Server database. The purpose of the database was to store information about the components available to build the pivot. However, when we generated the specification for manufacturing, we needed
    to identify those components as BOMs.
    Some bills represented a collection of physical parts that would be assembled into a system component. For example, every pivot needed a pump to draw water from a well into the system. That pump might be electrically powered, meaning
    it needed a transformer and fuse box, too. Or the pump might be fuel powered, meaning it needed a tank, a fuel pump, and hoses to connect the pump to the tank. In either case, the required parts for the pump would be listed in a pump bill.
    The bill for a complete pivot would include a collection of other bills. For example, a standardized pivot might consist of a tree of bills for the pump, another tree of bills for the spans of pipe used to deliver water, and bills for any other equipment
    needed to build that pivot system."
    LINK: http://msdn.microsoft.com/en-us/magazine/cc794278.aspx
    Kalman Toth Database & OLAP Architect
    SELECT Query Video Tutorial 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Please help how to design query to implement this requirement.

    Dear Expert,
    Here is what I have and what the requirement is:
    I have a InfoCube:
    Dimensions:
    1. Material
    2. Currency
    Key Figures:
    1. Qty
    2. Amount
    We want to get the Qty and Amount by Material, but use Currency to be the filter.
    It means for example, if the Currency have CNY for one material, we need to show all the Qty/Amount, not only Qty/Amount in CNY.
    So please help give some idea about how to design the query to implement this requirement.
    Thank you,
    Andy

    Hi Andy:
    To accomplish your requirement you need to do 2 things:
    1. Create a Variable for the Currency (to be used as the Target Currency not as a filter for the Characteristic itself).
    2. Use the Standard Currency Conversion for the Amount Key Figure (Conversion Tab).
    This way, while executing the report you can select any currency you want and all the amounts will be converted to that currency.
    Take a look at this paper:
    "How to... Use Variables for Currency Conversion"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0?quicklink=index&overridelayout=true
    A more detailed explanation can be found on this article provided by Ramakrishna Gattikoppula:
    "Currency Conversion in BI 7.0"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?quicklink=index&overridelayout=true
    In summary, to work with the Standard Currency Conversion you need to define 4 things:
    - Exchange Rate Type.
    - Source Currency.
    - Target Currency.
    - Time Reference.
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on May 31, 2010 11:19 AM

  • My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

    My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
    Can anyone help?

    Yep.  Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI.  I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
    It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column.  Now it's just blank.  Link to screenshot below:
    http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
    Note the install date.  That's when I was able to successfully reinstall it.  Now I can't even do that.  I should also mention I tried Revo Uninstaller.  It deleted one small registry key, but nothing changed.
    By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it?  It refused to run unless I had one in it, so I used my install dvd.

  • Apple Tv (3rd generation) says it is connected (via ethernet), but none of the app, or channels, will work. They all say they are unvailable, try again later. The only thing that seems to work is iTunes. (I live in a dorm if that helps)

    Apple Tv (3rd generation) says it is connected (via ethernet), but none of the app, or channels, will work. They all say they are unvailable, try again later. The only thing that seems to work is iTunes. (I live in a dorm if that helps)

    Its not properly connected to the network. Most school networks require login via webpage, which isn't possible as ATV has no browser. You will need to contact the IT dept or the network provider.

  • Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

    Gorgeous Hello All,
    Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    In my local machine :
    1.)I have completed my technical writing courtesy Design editor
    2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
    3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
    4.)Viewing Primary Layout : File -> View -> Primary Layout
    Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
    Show Stopper, At my Application Server :
    5.)I copy the entire robohelp project folder from my local machine to my application Server path
    6.)My Application has been developed in ASP .NET, Version 4.0.
    7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the  Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
    8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
    a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
    *** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
    ( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
    Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
    Cheese – Vipin Nambiar

    If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
    http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
    All along your questions have been based on webhelp, why suddenly are we going go CHMs.
    See Snippets on my site for the correct form of help to use in different scenarios.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for