Help Needed - Exploding Image

I am trying to achieve a specific effect in a short film that I am making, and I am having lots of trouble getting anywhere close. Hopefully, someone here can provide some guidance and put me on the right path.
I have a keyed-out image of a character, and I want the image to break up into lots of tiny balls. The balls should be textured with the part of the image file that they broke from (does that make sense?).
The balls should wobble a little, but maintain the rough shape of the original image, and then speed off in lots of different directions. I think I saw something similar in the Lawnmower Man.
I have been playing around with a tutorial that Patrick posted a few months ago, which showed a picture being assembled from loads of smaller images, and that is getting me part of the way. The barrier I am hitting is getting the smaller images into a psuedo 3d shape, and then keeping them in the same shape as the original image.
Any thoughts?

i don't know if this would work since i'm not in front of motion at the moment, but could you apply a Filters->Distortion->Sphere filter to the replicator cell? or even possibly to the replicated object (the image sequence movie).
(if you followed the tutorial that Patrick posted a while ago, i think he made this effect by using a replicator on an image sequence movie where the frames in the images sequence were the slices of the image).
if i have a chance i'll try this with a motion project i've got at home setup with this very effect. if i have any luck before you do, i'll post the results.
PowerMac G5 2.5GHz   Mac OS X (10.4.5)  

Similar Messages

  • Help needed with image

    I currently need a web page to be turned to image, so that later i can paint boxes and regions for classifying the various part of the page. The problem is the page is dumped to a jpg but the program doesnt wait for the page to load and gives me a blank screen shot. below is the code
    JEditorPane jep = new JEditorPane();
    jep.setEditable(false);
    try {
    jep.setPage("http://www.google.com");
    catch (IOException e) {
    jep.setContentType("text/html");
    jep.setText("<html>Could not load Page </html>");
    JScrollPane scrollPane = new JScrollPane(jep);
    JFrame f = new JFrame("Displaying Web Page");
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.getContentPane().add(scrollPane);
    f.setSize(512, 342);
    f.setVisible(true);
    Image image2 = scrollPane.createImage(800,600);
    BufferedImage image = (BufferedImage) image2;
    try {
    ImageIO.write(image, "jpg", new File("c:\\Temp\\tt.jpg"));
    } catch (IOException ex) {
    ex.printStackTrace();
    The image was turned to BufferedImage since it gave me errors when I tried to give write the image file.
    I think there needs to be some sort of wait operation but cannot figure out :\
    Any help would be greatly appreciated.
    Thanks in Advance
    Sceptre

    what do u mean by stack trace ?
    the problem is not the error with the image file, that is solved by using BufferedImage.
    The Problem is the program not waiting for the page to load before taking the screen shot.
    As for the error when using an Image for the ImageIO.write it was the following:
    symbol : method write(java.awt.Image,java.lang.String,java.io.File)
    location: class javax.imageio.ImageIO
    ImageIO.write(image2, "jpg", new File("c:\\Temp\\tt.jpg"));
    1 error
    Sorry if I wasn't clear

  • Help needed with Image Events problem

    Hi there I'm writing what I thought was a simple script to convert a folder full of images from jpg to tiff. But the script fails when trying to convert the first image in the folder. Instead of converting the image, Preview opens with the image shown and I get this error message: error "The variable ImageRef is not defined." number -2753 from "ImageRef".
    I have seen some posts about other people having the same problem, but I haven't seen any solutions.
    Here's the script.
    on run
    tell application "Finder"
    set PicturesFolder to ((path to home folder) as string) & "Pictures:SenseCam" as alias
    set Photographs to (get entire contents of PicturesFolder) as alias list
    end tell
    tell application "Image Events"
    launch
    repeat with Photo in Photographs
    if (Photo as string) ends with "jpg" then
    set ImageRef to open Photo
    save ImageRef in Photographs as TIFF
    close ImageRef
    end if
    end repeat
    end tell
    tell application "Finder"
    repeat with Photo in Photographs
    delete Photo
    end repeat
    end tell
    end run
    Thanks in advance for any help.
    John

    Hello
    You may try something like the modified code below.
    Noticiable changes :
    #1 - Removed the parentheses. Your original code won't yield alias list but a list of finder objects, which is the reason why Preview opens the image. (The statment 'open finderObject' behaves the same as double clicking it in Finder)
    #2 - Only delete the original jpeg files which are converted to tiff.
    #3 - Build new path for converted image.
    #4 - Save in new path. (When saving image in a format other than its original format, always save the image to a new file and do not attempt to overwrite the source file.)
    cf.
    http://www.macosxautomation.com/applescript/imageevents/08.html
    on run
    tell application "Finder"
    set PicturesFolder to (path to home folder as string) & "Pictures:SenseCam:" as alias
    set Photographs to get entire contents of PicturesFolder as alias list -- #1
    end tell
    set DonePhotos to {} -- #2
    tell application "Image Events"
    launch
    repeat with Photo in Photographs
    set Photo to Photo's contents
    set oldPath to Photo as string
    if oldPath ends with ".jpg" then
    set newPath to oldPath's text 1 thru -5 & ".tif" -- #3
    set ImageRef to open Photo
    save ImageRef as TIFF in newPath -- #4
    close ImageRef
    set end of DonePhotos to Photo -- #2
    end if
    end repeat
    end tell
    tell application "Finder"
    delete DonePhotos -- #2
    end tell
    end run
    Hope this may help,
    H

  • Help Needed..Fingerprint Identification..Image Manipulation

    Norfolk State University Student (Help Needed):
    I'm working on Fingerprint Identification using image correlation and/or a feature-based approach.  First, Goal is to minimize the lines of the minutia so that they are one pixel thick.  What services does Labview offer that will help me accomplish this task??

    Hey Snakehead...,
    Have you tried improving your original image with better lighting, better camera, better lens, etc.? What image processing have you done already, or are you starting from scratch? I agree with AnalogKid in providing some sample images to the forum so we can get an idea of what you are working with. Have you performed any morphology processing on the image? Have you tried edge detection functions? There are numerous functions that NI provides with their NI Vision software that will help you process your image, it is just finding the right combination that is the toughest part. Last, if you do have the Vision software, I might suggest taking a look at the Vision concepts manual to get an idea of the different functions and their capabilities. Let us know what kind of images you are working with and what you have done so far, and last, what you would like to eventually see. Thanks, and have a great day.
    Regards,
    DJ L.

  • I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

    I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
    thanks!

    I wouldn't say pixelated; more like blurry.
    Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

  • Help needed placing extra images in my portfolio.

    I like to add some more pictures by my portfoliomap.
    I have now 6 items each page and i like to know if its possible to add some more pictures and how i can do this?
    You can find my site at..
    http://www.dorffdesign.nl/affiches.html

    As you can see on
    http://www.dorffdesign.nl/advertenties.html
    it worked out fine..
    Only the last set off images contait to much space between the set before? Do you know where i can adjust this?
    Regards Brian
    Date: Tue, 17 Apr 2012 09:07:38 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help needed placing extra images in my portfolio.
        Re: Help needed placing extra images in my portfolio.
        created by Altruistic Gramps in Dreamweaver - View the full discussion
    Upload the images to the images folder and use the markup as you have been using in the following, changing the name of the image to suit.
    !images/arcadisch_logo.jpg|alt=|src=images/arcadisch_logo.jpg!
    Gramps
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4340979#4340979
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4340979#4340979. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • [HELP] need TX2 recovery DVD/Image

    [HELP] need TX2 recovery DVD/Image HP won't repair it b/c i dont have the original software....can someone provide me an image or i will pay $ for DVD plz full model is TX2-1024CA

    That is a notebook PC. Maybe this document will help? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Serious help needed fixing an image gallery

    On my page
    http://www.dorff.nl/clients.html
    ive put this very nice gallery..
    The only problem is. I divided the gallery in 6 groups. But in every group you will see the same images. How can i change the images for each group seperately?
    I hope you understand what i ment.
    Regards Brian

    How i can use the four files you have send me?
    In dreamweaver im getting the message...
    lightbox.css is not on the disk
    prototype.css is not on the disk
    scriptaculous.css is not on the disk
    lightbox.js is not on the disk
    Date: Thu, 12 Apr 2012 12:37:39 -0600
    From: [email protected]
    To: [email protected]
    Subject: serious help needed fixing an image gallery
        Re: serious help needed fixing an image gallery
        created by adninjastrator in Dreamweaver - View the full discussion
    Here are 4 files you need:http://www.olympicdiscoverytrail.com/style_sheets/lightbox.csshttp://www.olympicdiscoveryt rail.com/style_sheets/prototype.jshttp://www.olympicdiscoverytrail.com/style_sheets/script aculous.js?loa d=effectshttp://www.olympicdiscoverytrail.com/style_sheets/lightbox.jsHere is an entire web page with working multiple galleries:
    Photo Gallery 1
        !images/125/paw_Carrie-Elwha.jpg|title=Elwha River Valley approaching the bridge|height=93|alt=Elwha River Valley approaching the bridge|width=125|src=images/125/paw_Carrie-Elwha.jpg|border=0!
    Photo Gallery 2
        !images/125/sw_IMG_1115-Downtown-Trail.jpg|title=Trail near High School close to downtown Sequim|height=83|alt=Trail near High School close to downtown Sequim|width=125|src=images/125/sw_IMG_1115-Downtown-Trail.jpg|border=0!
       </div>     <!-- close main_container -->
    </div>
    </body>
    </html>Here is a link to that working page on-line:http://www.olympicdiscoverytrail.com/trail_maps/slideshow.htmlThere is not much more I can do!You'll have to take the bull by the horns and start coding!Copy/Paste this HTML code into a new, blank page and edit the paths to all the .css, .js, and image files.Best of luck!Adninjastrator
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4330648#4330648
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4330648#4330648. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Help needed with perl Image::Magick module

    I don't know if this is the right place to post this (it might belong in the Newbie corner instead), but I'll give it a try.
    I need an Image::Magick Perl module (and a load of other modules, which I have found) for a program I desperately need. Now, the only thing I know about Perl is that v. 6 is supposed to be coming out soon - apart from that, I'm blank. The installation is giving me some problems.
    The installation guide is somewhat ambiguous. It says:
    Next, edit Makefile.PL and change LIBS and INC to include the appropriate path information to the required libMagick library. You will also need paths to JPEG, PNG, TIFF, etc. delegates if they were included with your installed version of ImageMagick.
    In the Makefile.PL which comes with the package, these two are defined:
    'INC' => '-I../ -I.. -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/X11R6/include/X11 -I/usr/include/libxml2',
    'LIBS' => ['-L/usr/lib -lMagick -L/usr/X11R6/lib64 -L/usr/lib -ltiff -ljpeg -lpng -ldpstk -ldps -lXext -lXt -lSM -lICE -lX11 -lbz2 -lxml2 -lpthread -lm -lpthread'],
    I haven't changed anything in them, because I haven't got the slightest idea what to change and to what. When I run the installation procedure ('perl Makefile.PL', 'make', and 'make test'), I get an error message during the test (but not before that). Here's the entire output from 'make test':
    /bin/sh ../magick.sh PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/bzlib/*.t t/jng/*.t t/jpeg/*.t t/mpeg/*.t t/png/*.t t/ps/*.t t/tiff/*.t t/x/*.t t/xfig/*.t
    /bin/sh: ../magick.sh: No such file or directory
    make: *** [test_dynamic] Error 127
    There is mention somewhere that one might compile the module together with ImageMagick or with Perl, but I don't think I'm ready for that...
    Is there anyone skilled in Perl who can tell me what it is that I'm doing wrong, alternatively make a package file...?

    I've found two other packages that I needed in AUR, but when I run the make test for the program that I need (fontlinge), it still complains that it can't find the Image::Magick module. I already have the imagemagick package installed, though, that's why I thought I'd have to install and compile the perl module separately.
    Here's the output from the 'make test' for fontlinge:
    make -C modules
    make[1]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
    make[2]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
    make[2]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
    make[1]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
    ./misc/check_for_modules.pl --skip-fontlinge-module
    Ok. Cwd 'abs_path'
    Ok. DBI
    Ok. User::pwent
    Missing Image::Magick
    Ok. Getopt::Long
    Ok. DBD::mysql
    Ok. File::Find
    Ok. File::Path
    Ok. ExtUtils::MakeMaker
    Ok. 5.006
    Ok. bytes
    Ok. -utf8
    It seems some required modules are missing.
    How to get missing modules differs from _which_ module you are missing.
    You can get modules like DBI from your distributions CD
    or search the web for a RPM/DEB/...-file. www.cpan.org is always a good adress.
    It may be a good idea to configure your perl-CPAN-Module as ROOT(!!!) by typing
    perl -MCPAN -eshell
    It is VERY important that you do not just 'su' to root but 'su -' on SuSE linux.
    Once you have configured perl, you can install CPAN-modules by
    perl -MCPAN -e 'install MODULENAME'
    Other modules like Image::Magick require you to have the programs installed
    they belong to.
    If you are missing a 'fontlinge'-module, you have not installed this
    program correctly. :-)
    If the missing module begins with a '-' sign this module might miss,
    because it is not possible to DEACTIVATE it, i.e. unwanted utf8 encoding.
    make: *** [test] Error 255
    If this makes sense to anyone, I'd be very happy. (For the record: Fontlinge is - or at least seems to be - the only decent font manager I've found for Linux. This seems to be a gaping, wide open black hole in the Linux world... There's gfontview, opcion, fontpage, and a couple of other minor apps that I've found, but none of them are functional for anything but the most basic operations, and on the whole, there doesn't seem to be much between the KDE font manager - which really makes one wonder how far the KDE people want to go in their emulation of windows... - and the font editor FontForge, which is great as a font editor, but overkill as a viewer, and hardly a manager.)

  • Help needed exporting large image sizes

    Hi All,
    I'm a newbie so forgive my lack of understanding here when it comes to exporting to large file sizes. In short I'm trying to export some images for large format printing but am having trouble preparing the right size in LR4.
    Specifically I'm trying to produce w 30" x h 20" images. I understand that to do this I'll need a image that is 9000 x 6000 pixels set at 300 ppi. My problem is that when I export this, with the dimensions set to width and height in pixels and resize unchecked LR4 produces an image that is 9000 x 4887?
    Would appreciate any thoughts on what i'm doing wrong here? Is it simply that the aspect ratio of image is wrong to produce this size image? My concern is not producing an exact file size for printing.
    Thanks!
    Tom

    I've sorted the crop ration for a 3:2 image but resulting in a much smaller image.
    Could you give me the details? How much smaller? What size is it? What else did you change other than the aspect ratio?
    I then then tried a 16:9 ratio which is much better
    Details please? What is better? (And why try this if you need 3:2??)
    seem to have run into a similar prob in that calculations say for a 40 x 20 I'll need 6,000 x 12,000 but lr4 will only ouutput 6,000 by 10,667.
    You are repeating your initial mistake. Images cropped to 16:9 aspect ratio cannot export to a 3:2 aspect ratio. Only images cropped to a 3:2 aspect ratio will export to a 3:2 aspect ratio.

  • Image sequence help needed

    Hi people, first time posting, spent a while researching nobody seems to have covered this as far as i looked. I am dealing with about 1200 images in flash, in sequence, i tried importing the frames all at once and they all came up blank... for some reason they were red up until 315 and then the rest were blank, some were black. People have said that it is likely a ram issue? what the hell? the images total just under a half a gig and i have 8gb of ram, i looked at my processes and flash is only using about 3gb of ram. I tried importing about 100 images at a time, and i got to about 300 and again, the same issue started, after seeing them all work up to 300. I need to be able to take out a frame here or there from a video. I hope i need not exaplin more, the point is i need this image sequence to work, and i need to be able to see all 1200 frames and it simply is not working for me. Any solutions? flash has been driving me nuts lately.

    This is a known limitation in Flash. Do note that the size of the image on the filesystem may say something like half a gig but once you take it into Photoshop you'll see the uncompressed actual size of the image (on the bottom of each window). For example a 52KB JPEG in Photoshop right now states it's 950.2K. I'm assuming your images are probably larger so you can quickly see how this becomes an issue. Open 700 52kb images and you're sitting at 7GB ram, 1GB for the OS and are now in pagefile (HD ram).
    Flash is about being light weight. After Effects would sequence those images like nothing but Flash is not designed like that.
    The solution depends on your needs. Why are you importing 1200 frames individually? If the frames make up a video (or several videos) you should create them in an actual video while saving huge amounts of disk space and processor, while also getting around this Flash limitation.

  • Help needed : Extension manager cs6 not listing products

    Help needed to Adobe extension manager cs6 to show all my cs6 products
    I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
    My Computer windows xp 32bit
    My Photosop version cs6
    My Dreamweaver version cs6
    I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
    and my XManConfigfile
    <?xml version="1.0" encoding="UTF-8"?>
    <Configuration>
        <VariableForExMan>
            <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
            <Data key="$dreamweaver">$installfolder</Data>
            <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
            <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
            <Data key="NeedOperationNotification">true</Data>
            <Data key="QuitScript">dw.quitApplication()</Data>
            <Data key="SupportedInSuite">CS6</Data>
            <Data key="HostNameForCSXS">DRWV</Data>
            <Data key="ProductVersion">12.0</Data>
            <Data key="Bit">32</Data>
    <Data key="DefaultLocale">en_US</Data>
    </VariableForExMan> 
    </Configuration>
    Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
    Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
    and my XManConfigfile
    <?xml version="1.0" encoding="UTF-8"?>
    <Configuration>
        <VariableForExMan>
            <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
            <Data key="$photoshopappfolder">$installfolder</Data>
            <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
            <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
            <Data key="$platform">Win</Data>
            <Data key="$actions">$presetsfolder/Actions</Data>
            <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
            <Data key="$brushes">$presetsfolder/Brushes</Data>
            <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
            <Data key="$colorbooks">$presetsfolder/Color Books</Data>
            <Data key="$colorrange">$presetsfolder/Color Range</Data>
            <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
            <Data key="$contours">$presetsfolder/Contours</Data>
            <Data key="$curves">$presetsfolder/Curves</Data>
            <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
            <Data key="$duotones">$presetsfolder/Duotones</Data>
            <Data key="$exposure">$presetsfolder/Exposure</Data>
            <Data key="$gradients">$presetsfolder/Gradients</Data>
            <Data key="$huesat">$presetsfolder/Hue Sat</Data>
            <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
            <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
            <Data key="$layouts">$presetsfolder/Layouts</Data>
            <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
            <Data key="$levels">$presetsfolder/Levels</Data>
            <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
            <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
            <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
            <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
            <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
            <Data key="$patterns">$presetsfolder/Patterns</Data>
            <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
            <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
            <Data key="$scripts">$presetsfolder/Scripts</Data>
            <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
            <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
            <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
            <Data key="$styles">$presetsfolder/Styles</Data>
            <Data key="$textures">$presetsfolder/Textures</Data>
            <Data key="$tools">$presetsfolder/Tools</Data>
            <Data key="$variations">$presetsfolder/Variations</Data>
            <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
            <Data key="$workspaces">$presetsfolder/Workspaces</Data>
            <Data key="$zoomify">$presetsfolder/Zoomify</Data>
         <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
         <Data key="$lights">$presetsfolder/Lights</Data>
         <Data key="$materials">$presetsfolder/Materials</Data>
         <Data key="$meshes">$presetsfolder/Meshes</Data>
         <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
         <Data key="$volumes">$presetsfolder/Volumes</Data>
         <Data key="$widgets">$presetsfolder/Widgets</Data>
            <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
            <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
            <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
            <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
            <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
            <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
            <Data key="$automate">$pluginsfolder/Automate</Data>
            <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
            <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
            <Data key="$effects">$pluginsfolder/Effects</Data>
            <Data key="$extensions">$pluginsfolder/Extensions</Data>
            <Data key="$fileformats">$pluginsfolder/File Formats</Data>
            <Data key="$filters">$pluginsfolder/Filters</Data>
            <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
            <Data key="$importexport">$pluginsfolder/Import-Export</Data>
            <Data key="$measurements">$pluginsfolder/Measurements</Data>
            <Data key="$panels">$pluginsfolder/Panels</Data>
            <Data key="$parser">$pluginsfolder/Parser</Data>
         <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
            <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
            <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
            <Data key="UserExtensionFolder">$photoshopappfolder</Data>
            <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
            <Data key="DisplayName">Photoshop CS6 32</Data>
            <Data key="ProductName">Photoshop32</Data>
            <Data key="FamilyName">Photoshop</Data>
            <Data key="ProductVersion">13.0</Data>
            <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
            <Data key="SupportedInSuite">CS6</Data>
            <Data key="HostNameForCSXS">PHSP</Data>
            <Data key="Bit">32</Data>
        </VariableForExMan> 
    </Configuration>
                                                                        Please someone help me i cant install any photoshop extension because of this issue,,,

    Waiting for your reply ...thanks
    Here is the results
    I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
    Result: BridgeTalk Diagnostics
      Info:
      Name = estoolkit-3.8
      Status = PUMPING
      Path
      Version = 2.0
      Build = ES 4.2.12
      Next serial number = 40
      Logging: = OFF
      Now = 15:55:49
      Messages:
      Message Version = 2.05
      Authentication = ON
      Digest = ON
      Thread: estoolkit-3.8#thread
      Avg. pump interval = 55ms
      Last pump = 62ms ago
      Ping: 7
      ECHO_REQUEST: ECHO_RESPONSE
      Timeout = undefined
      Handler = undefined
      STATUS: PUMPING
      Timeout = undefined
      Handler = undefined
      MAIN: MAIN
      Timeout = undefined
      Handler = installed
      LAUNCHED: LAUNCHED
      Timeout = undefined
      Handler = installed
      DIAGNOSTICS: DIAGNOSTICS
      Timeout = undefined
      Handler = installed
      INFO: INFO
      Timeout = undefined
      Handler = installed
      SETUPTIME: thread=0ms, left=16ms
      Timeout = undefined
      Handler = undefined
      Instances: 3
      estoolkit-3.8#dbg:
      msg[15:55:49]: 00000035
      @BT>Version = 2.05
      Target = estoolkit-3.8#dbg
      Sender = estoolkit-3.8#dbg
      Sender-ID = localhost:win3788
      Timeout = 15:55:50
      Type = Ignore
      Response-Request = Timeout
      Headers = (no headers)
      Timestamp = 15:55:49
      Serial-Number = 35
      Received = undefined
      Result = undefined
      Error = undefined
      Body = (empty)
      Incoming: 1
      Outgoing: 0
      Handler: 9
      ExtendScript = for all messages
      Error = for only msg #25
      Error = for only msg #27
      Error = for only msg #31
      Result = for only msg #35
      Error = for only msg #35
      Timeout = for only msg #35
      Result = for only msg #37
      Error = for only msg #37
      estoolkit-3.8#estk:
      msg[15:55:49]: 00000037
      @BT>Version = 2.05
      Target = estoolkit-3.8#estk
      Sender = estoolkit-3.8#dbg
      Sender-ID = localhost:win3788
      Timeout = 16:05:49
      Type = Debug
      Response-Request = Result Error
      Headers = (no headers)
      Timestamp = 15:55:49
      Serial-Number = 37
      Received = undefined
      Result = undefined
      Error = undefined
      Body: 107 bytes
      Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
      Incoming: 1
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      estoolkit-3.8: (main)
      Incoming: 0
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      Targets: 1
      Connector = PCD
      Installed: 0
      Running: 0
      exman-6.0:
      Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
      Display Name = Adobe Extension Manager CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = OFF
      BundleID = com.adobe.exman
      Status = (not running)
      ExeName = Adobe Extension Manager CS6.exe
      Installed: 1
      Running: 0
      Groups = (no groups defined)

  • HELP NEEDED!! (please) CS6

    HELP NEEDED!  I have been working for 3 days in a "new doc". Of course i have saved several times (control+s)
    but i do not remember it asking me about file name or folder. Today my comp crashed and i do not find the file. Just found 2 files (a tmp and one with no extension)
    : one with 174 mg and another one with almost 2 gb. Is there any possibility to recover my work? Photoshop did not oppened a thing when i restarted comp
    Thanks in advance

    The TMP file is your Scratch Disk file, and cannot be "recovered" to an Image file.
    Your second file might be almost anything. Though designed more for video files, both G-Spot and MediaInfo (both free file info utilities), CAN read several Still Image file types, and might help point out what that file (the one with no extension) really is. OTOH, as it could be almost anything, it could be that there is no header info in the file, for either to read.
    Good luck,
    Hunt
    PS - Before I did much additional work, I would investigate WHY your computer shut down. If you are on a PC, I would go into Event Viewer, at the time of the shutdown, and see if you can track down any warning, or error messages, in both the System and Applications Tabs. I am pretty sure that a Mac has similar, but have not a clue where, or even what it would be called.

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

  • Help needed with this form in DW

    Hi, i have created this form in dreamweaver but ive got this problem.
    In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
    But the problem is when ill get the messages. Only the text from the large text field is there.
    What did i do wrong??
    http://www.hureninparamaribo.nl/contact.html
    Thank you
    Anybody??

    Thank you for your response. So what do i have to do to fix this?
    Date: Sun, 20 Jan 2013 07:57:56 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help needed with this form in DW
        Re: Help needed with this form in DW
        created by Ken Binney in Dreamweaver General - View the full discussion
    You have several duplicate "name" attributes in these rows which also appears in the first row
    Telefoon:
    Huurperiode:
    Aantal personen:
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for