Help needed for Auto-save functionality on appraisal bsp (HAP_DOCUMENT)..
BSP -> HAP_DOCUMENT.
I browsed through some threads and found out the code for this, but wanted to know which page/controller method I should write in my code. This functionality is required in both Manager page and in Employee page.. Could someone help me on this, it would be very helpful...
hi ,
the probelm with adobe (pdf) only(.i.e. pdf attachments are damaged or something) so, check the below links to get more info regrding above error...
http://www.computing.net/answers/windows-xp/pdf-error-acrobat-could-not-open/118542.html
http://forum.planetpdf.com/wb/default.asp?action=9&fid=6&read=62004
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=6911
thnx
suriya
Similar Messages
-
I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/ -
Adobe story team:
I had a best script to date, on an older hard drive and the motherboard failed on my HP tower. The sony laptop has a more recent dated script, but not the one I want. How do I replace an "older" date script, one that I want for a newer script. I don't want the newer script, I want the older one that is on a "pulled" hard drive again, from a tower that failed.
Do I save the older file on an offline, using a new ID, new password, forever changed or what can I do?
I need a fairly quick response, timing is critical. HP tower is the problem.
drgm
thanksYou have it half right. the issue is the HP tower I had failed. The mother board failed, I pulled the hard drive which is windows 7, I have a sony laptop which is in 32 bit vista, I am not sure if the different versions will be an issue. can i take a file off the pulled hard drive and put it somewhere in a directory even with the different windows vista vs windows 7 if so which file should i copy on the pulled hard drive and where do i put it on the laptop, directory plus I will go back on online save it in the clouds and reformat the laptop and go to windows 7 then go back to adobe story and go from there. thank you for your quick attention in this matter.
Respectfully,
drgm
doug morrow
Date: Tue, 24 May 2011 22:10:24 -0600
From: [email protected]
To: [email protected]
Subject: Help - lost motherboard, auto save saved older script, newer script actually with older date.
Hi
I am not sure if I understand your problem correctly, but as far as I can make out you had been working on a script and then it got autosaved and now you wish to go back to the "older" script.
In order to do so you may visit your document's history through the View->History option. There you will see older versions of your document (if you had not turned off autoversioning). You may then open an older version of the document from the panel by double clicking on it. Once on an older version you will get to see the "Make Latest" option. Clicking on that will make the "older" state of your document your "current" state and then you may proceed to edit the document as usual.
I hope this is helpful to your situation. In case you face any issues in following the mentioned steps do let us know.
Thanks
Ali
Adobe Story Team
> -
The Versions and Auto Save functions do they work with Office 2011?
I recently installed LION on my Apple Pro. However the VERSIONS and AUTO SAVE functions do not seem to work with OFFICE 2011 Word and Excel. Does anyone know why?
GabrielWaiting for Microsoft to update them
-
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Any solution to the iOS 6 bug for auto lock function for the iPhone 4S
Any solution to the iOS 6 bug for auto lock function for the iPhone 4S
My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion. -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Urgent help needed in Rich Text Functionality in BSP (Bold, Italic, etc)
The standard Appraisal BSP (HAP_DOCUMENT) displays the documents in a plain text box
Scenario - Standard BSP application HAP_DOCUMENT for appraisals provides users to input in plain text boxes (htmlb textedit)
However, there is requirement to support rich text (bold, italicised, underline etc) for these text boxes. Basically, there are 3 aspects to this scenario
1. Enable these plain textboxes with rich text editor
2. Store the rich text contents of text boxes in Database table
3. Convert and display the data stored in db table as rich text.Note that the previous reference to tokens only applies if the field is a Multiline text field. Regular fields can't change their font or display based upon mapping data.
-
Help needed for file processing using FTP
Hi All,
I am new to ODI tool and currently we are implementing one project in ODI. Could you please, any one help me on the following requirement... how to implement it?
Scenario:
i) I need to pick a file from remote host 'outbox' dir using FTP process, and place into local 'temp' dir. (I can do it with odiFTPGet tool)
ii) Change the file as per target business requirement.??? ( this step challenging me)
for ex:
if source file name : <project name>_<source ID>_<transaction name>_<unique id>.txt
target name should be : 1234_<transaction name>_<sysdate in yyyyMMddhhmmss>_<unique id>_2345.txt ( here 1234 and 2345 are hard coded values)
iii) Later move to local 'temp' to local 'outbox' dir. ( I can do it with odiFileMove tool)
iv) After successful process move the file from remote 'outbox' to remote 'archive' dir ??? (again this is challenging me).
For this my questions are:
1) How to get file name into a variable ( In one of the post , it says we need to create data model and data stores, and interface to get the file names into a file. apart from is there any easy way i can implement it in package it self?)
2) How to tokenize a long string ( i.e., need to tokenize the source file to get <unique id> and <transaction name> and map to target file name)
3) How to define implementation for Java in user function?? do we need to use class declarations and import statements?? I need a sample user function in Java.
4) How to move/rename a file in remote server?? ( need to move file from remote 'outbox' server to remote archive' dir)
5) If any step in package fails, How to get the error msg into a variable which i can use for sending mail and raise a ticket in remedy?? ( I will pass that variable to as content to mail and remedy ticket)
6) How to handle list type data (string list) by variables in ODI?? (As we can define single variable not as list.)
I am sorry to ask all my queries I a single post. But I need to solutions for all to implement this in my project.
Thanks in advance. Appreciate early response.
Regards,
Kiran.NCan any one share your thoughts for my request.
Thanks in advance.
Regards,
Kiran -
Please urgent help needed for the following
Hi Everybody!
I desperately need help as soon as possible.
Following is the partial code for the driver program which will use the Employee class Objects(Employee is declared abstract). If you want to see whole code you can take a look at my last two or three posts in this forum.
1- Now data input by the user in the specific field( name, rate ) should be displayed in the �List� at the top of the frame after pressing �Enter� key. Can anyone help me to achieve this functionality. While doing this keep in mind the capacity of Array
2- I also need �rate� textfield to enabled initially & become disable when �raise� (for trigerring calculating raise in weekly pay) is checked. On this �increased� textbox will become �enabled� which was disabled initially.
3- The stuff which may have the problems is followed by �*******************�.
// here is how I declared handlers
ActionEventHandler handler = new ActionEventHandler();
ItemEventHandler listener = new ItemEventHandler();
// here is the declaration of awt components which are going to be placed on Frame.
public class ActionEventHandler implements ActionListener
public void actionPerformed(ActionEvent event)
//if(event.getSource() == enterButton)
for (int i = 0 ; i < empArray.length; i++)
if(event.getSource() == enterButton)
empData.add(nameField.getText());
/*else if(event.getSource() == hoursField)
calcWeeklyPay();
if(event.getSource() == clearButton)
nameField.setText("");
hoursField.setText("");
rateField.setText("");
increaseField.setText("");
}//else if
}//ActionEventHandler
public class ItemEventHandler implements ItemListener
public void itemStateChanged(ItemEvent event)
//if(event.getSource() == enterButton)
if(hEmployee.getState())
createHourly();
}//if
/*else
sEmployee.setState(true);
createSalaried();
}//else*/
else if(raiseSal.getState())
increaseField.setEnabled(true);
rateField.setEnabled(false);
}//itemStateChanged
}//ItemEventHandler
public void createHourly()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
//empData.add(emp.toString());
enterButton.setLabel("add");
}//createHourly
/* public void createSalaried()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
enterButton = new Button("add");
}//createSalaried*/
looking forward your kindnessVisit YAT-Yet Another Thread this is a discussion using the Sun book Core Java 2
and one part in that book uses an example with Employee class of which I assume you are stealing your class-name from. Anyway, that thread is in the Java forums. -
Help needed for report on tables vbak and vbap
Hello,
I needed help in one of my work issues, this is my first project and Iam still learning. kindly help.
I was asked to take erdat,vbeln,posnr from selection screen and compare it with the data already in tables vbap,vbak. If the data
already exists and exception needs to be raised saying that the 'data exists',but if the data is not present in the tables the
tables have to be updated. This has to be done using function module only.
Then I have to write a REPORT calling the above function module and finally displaying the number of records updated and the
list of them.
I have started writing a function module:
FUNCTION z_tableupdate.
""Local Interface:
*" IMPORTING
*" VALUE(DATE) LIKE VBAK-ERDAT DEFAULT SY-DATUM
*" VALUE(SALESORDERNO) LIKE VBAK-VBELN
*" VALUE(ITEMNO) LIKE VBAP-POSNR
*" EXPORTING
*" VALUE(EX_VBAP) LIKE VBAP STRUCTURE VBAP
*" VALUE(SYS) LIKE SY-SYSID
*" VALUE(EX_VBAK) LIKE VBAK STRUCTURE VBAK
*" EXCEPTIONS
*" DATA_UPDATED
*" DATA_EXISTS
SELECT * FROM vbak INTO vbak_wa WHERE erdat = date
AND vbeln = salesorderno.
ENDSELECT.
SELECT * FROM vbap INTO vbap_wa WHERE posnr = itemno.
ENDSELECT.
IF sy-subrc EQ 0.
ex_vbap = vbap_wa.
ex_vbak = vbak_wa.
ELSE.
RAISE data_exists.
ENDIF.
sys = sy-sysid.
ENDFUNCTION.
How is the above code for function module, will this work??
Now can I write a report to call the above function module and update the record?? if so, how to update ??? please help...Lots of thanks in advance.Hi
Welcome to SDN forum
Whay can't you write a simple report in SE38.
why you are using Fun module
Nothing wrong in it.
But first become perfetc in reports in SE38 and then do using the fun modules
write a simple select statement like
SELECT AVBELN AERDAT BPOSNR BMATNR
INTO TABLE ITAB
FROM VBAK AS A JOIN VBAP ON
AVBELN = BVBELN
WHERE A~VBELN IN S_VBELN AND
A~ERDAT IN S_ERDAT AND
B~POSNR IN S_POSNR.
IF SY-SUBRC <> O.
WRITE: / 'No data found'.
ENDIF.
First write this in SE38 by defining a proper selection screen and internal tables
then do as fun module
see the doc for fun module
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Regards
Anji -
The auto save function will not turn off.
While opening some files, I get- "This document was not closed properly, and some of your changes weren't saved. Do you want to recover these changes or discard them?
Niel helped me to figure out that this was happening because the save option and recent items option was checked in the appleworks preferences. I unchecked the "auto save" and "recent Items" options in appleworks preferences>General>files settings window and It seamed to work for awhile but now the problem is back.
I don't know why, but the "Auto Save" folder inside the appleworks User Data folder, which is inside the Documents folder is still saving data.
Can someone please help?
MarcoGreetings Peggy,
Nice write up link! I deleted "appleworks 6 preferences" in home file>library>Preferences>Appleworks folder (and the com.apple.appleworks.plist). Then turned appleworks back on and went to preferences>general settings and unchecked the "auto save" and "recent Items" options in appleworks preferences. I noticed the "make default" option button didn't light up. Do you think that is a problem?
The "document was not closed properly" problem happens about every two days or so. I haven't been able to duplicate what ever I'm doing. I'll wait and see, and let you know.
Thank you very much.
Marco -
Seeking for Auto color function
In adobe Photoshop CS3 there is an Auto color function, you can reach it by going to Image->Adjustments->Auto color
If you have some yellow light on your photo, or some other light noises it will bring you your true color as it was taken at the day light.
How does this function work? I wont to use it in my flex project.Doesn't that reset the changes made in the current dialogue session, not reset to "default" (which does seem dangerous for clicky McGee over here, that's me).
0,0,0
128,128,128
255,255,255
are the shadows, midtones and highlights colors.
More about auto adjustments here:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7647a.html
Maybe you are looking for
-
Link between Inbound Delivery and Sales Order for Third Party
Greetings Gurus, My client is using a third party business model in a retail setting that fulfills sales order via purchase req --> PO --> Inbound delivery with GR posting --> customer billing document created through batch based on the delviery quan
-
CD Drive on G5 Xserve keeps ejecting CDs
can this internal drive be replaced if bad? system profiler tells me it is not a detachable drive. Thanks
-
Bc and dreamweaver cs6 site import issues
- issues importing BC sites in Dreamweaver cs6 - manage sites dialog, - flash loader spinning, "Retrieving site definition..." endlessly.
-
CIM_ERR_FAILED: Can not build instance name, missing value for key property SAP_ComputerSystem.Name This is the error while creating IDOC to File scenario thru Web AS ABAP technical system type can u people tel me how to create technical system and w
-
OO programing and other help......
I got the following done. It is very nearly finished. Apart from a few error. ( Which i can't find out why so if you figure it out please be so kind to tell me. ) I think you could see my idea and what i intend to do in this program. But it is my fir