Seeking for Auto color function

In adobe Photoshop CS3 there is an Auto color function, you can reach it by going to Image->Adjustments->Auto color
If you have some yellow light on your photo, or some other light noises it will bring you your true color as it was taken at the day light.
How does this function work? I wont to use it in my flex project.

Doesn't that reset the changes made in the current dialogue session, not reset to "default" (which does seem dangerous for clicky McGee over here, that's me).
0,0,0
128,128,128
255,255,255
are the shadows, midtones and highlights colors.
More about auto adjustments here:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7647a.html

Similar Messages

Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

my iphone5 does not have passcode setting option. this is for auto-lock function

Hello SLLH
You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Help needed for Auto-save functionality on appraisal bsp (HAP_DOCUMENT)..

BSP -> HAP_DOCUMENT.
I browsed through some threads and found out the code for this, but wanted to know which page/controller method I should write in my code. This functionality is required in both Manager page and in Employee page.. Could someone help me on this, it would be very helpful...

hi ,
the probelm with adobe (pdf) only(.i.e. pdf attachments are damaged or something) so, check the below links to get more info regrding above error...
http://www.computing.net/answers/windows-xp/pdf-error-acrobat-could-not-open/118542.html
http://forum.planetpdf.com/wb/default.asp?action=9&fid=6&read=62004
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=6911
thnx
suriya

Some terminal color functions, including directory-based prompt colors

All of this code is taken from my ~/.bashrc. Note that some variables are outside of functions. It should be easy to adapt everything below to your own preferences.
This is my PS1 prompt. Note how the color variables are used.
COLOR_1="\[\e[1;37m\]"
COLOR_2="\[\e[0;37m\]"
COLOR_3="\[\e[1;34m\]"
COLOR_4="\[\e[1;30m\]"
function set_ps1()
PS1="\n${COLOR_3}┌─[${COLOR_2}\u${COLOR_3}@${COLOR_4}\h ${COLOR_2}\w${COLOR_3}]\n${COLOR_3}└─> ${COLOR_2}"
set_ps1
A while ago I wrote this function to change the color of "decorations" in the prompt. It works by changing one of the color variables. If invoked with a number it will set the corresponding color, otherwise it will choose a random color from the available palette.
_palette=$(tput colors)
function color()
NUMBER=$1
if [ -z "$NUMBER" ]; then
NUMBER=$[ ( $RANDOM % $_palette ) + 1 ]
echo "number $NUMBER"
fi
COLOR_3="\[\e[0;38;5;${NUMBER}m\]"
set_ps1
Recently, when I was playing with colors, I also wrote this function to display the 256-color palette so I could easily choose a color to pass to the function above. If you pass it an argument, it will display the palette in a wide format.
function colors()
for NUMBER in $(seq 0 15); do
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
done
echo ""
if [ -z "$1" ]; then
for _I in $(seq 0 5); do
for _J in $(seq 0 5); do
for _K in $(seq 0 5); do
NUMBER=$((16 + $_I + 6 * $_J + 36 * $_K ))
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
done
echo -n " "
for _K in $(seq 0 5); do
NUMBER=$((16 + 36 * $_I + $_J + 6 * $_K))
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
done
echo -n " "
for _K in $(seq 0 5); do
NUMBER=$((16 + 6 * $_I + 36 * $_J + $_K))
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
done
echo ""
done
echo ""
done
else
for _I in $(seq 0 5); do
for _J in $(seq 0 5); do
for _K in $(seq 0 5); do
NUMBER=$((16 + 6 * $_I + $_J + 36 * $_K))
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
#echo -n " $_I$_J$_K"
done
echo -n " "
done
echo ""
done
echo ""
for _I in $(seq 0 5); do
for _J in $(seq 0 5); do
for _K in $(seq 0 5); do
NUMBER=$((16 + $_I + 36 * $_J + 6 * $_K))
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
#echo -n " $_I$_J$_K"
done
echo -n " "
done
echo ""
done
echo ""
for _I in $(seq 0 5); do
for _J in $(seq 0 5); do
for _K in $(seq 0 5); do
NUMBER=$((16 + 36 * $_I + 6 * $_J + $_K))
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
#echo -n " $_I$_J$_K"
done
echo -n " "
done
echo ""
done
echo ""
fi
for NUMBER in $(seq 232 255); do
printf "\e[0;38;5;${NUMBER}m%4d" $NUMBER
done
Even more recently, I've been using certain colors to provide visual cues about directory location that let me quickly scan open terminals to find the one I want, so I've written this function, which will change the PS1 prompt based on directory. Just add in cases as you need them and change the colors as you like (the colors below are just an example). You can use it synonymously with "cd".
function ccd()
cd $@
_dir=$(pwd)/
case $_dir in
~/projects/*)
color 202
/tmp/*)
color 49
/usr/*)
color 190
color 12
esac
Use this thread to post your own terminal color functions or variations of others that you've found here, along with feedback, discussion, etc.

I expect this to become something of a bargain bin for terminal color functions. A bit of rummaging might turn up a few gems, but most of it will be worthless crap to most.

Text-input component with auto-complete functionality for mobile

Hey guys,
I wonder if there is a text-input component with auto-complete functionality optimized for mobile development with AIR like the one that Android provides natively as you can see here http://developer.android.com/reference/android/widget/AutoCompleteTextView.html and here http://developer.android.com/resources/tutorials/views/hello-autocomplete.html.
At least I didn't find it in the latest SDK and I think such a component is pretty standard nowadays. Or did I simply overlook it?
Thank you guys for any advice.
Regards,
Thilo

Hi relaxtraja,
thanks for your reply!
I knew that there are a lot of auto-complete scripts on the web. What I was hoping was, that Adobe provides an officially supported auto-complete component optimized for mobile as part of the SDK (like in the Android SDK as I pointed out), but that doesn't seem to be the case. It's sad, because it's an essential part of modern UIs in mobile applications.
I've already created an auto-complete component by myself based on Spark components and I will end up using it. But I will have to optimize it for mobile applications beforehands. I just think something this essential should be provided by the SDK.
However, thanks for posting!
Regards,
Thilo

New functionality in ECC 6.0 for auto clearing of bank clearing account.

Is there any new functionality in ECC 6.0 for auto clearing of bank clearing account.
Regards,
Kishore

Hi,
There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
Thanks
Prasada

Could not execute auto check for display colors using command /usr/

I am trying to Install Oracle 10g R2 on Solaris X86 32 bit
I am connecting to system from my windows vista laptop through putty... I get the following error...
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 1214 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1799 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openw
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] n
User Selected: No
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
I have done the following:-
# DISPLAY=192.168.1.133:0.0; export DISPLAY
# echo $DISPLAY
192.168.1.133:0.0
# xhost+
xhost+: not found
# xclock
xclock: not found
I know that I have to do the following:-
1. Install SUNWxwplt package ========> Is already Installed
2. Set DISPLAY variable
3. Execute xhost + on target (set in DISPLAY) computer
# pkginfo -i SUNWxwplt
system SUNWxwplt X Window System platform software
Some sites claim xming and some xwindows etc.... Plz give me a step by step instruction as how to overcome this..
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display:
bash-3.00# DISPLAY=192.168.1.133:0.0; export DISPLAY; echo DISPLAY
DISPLAY
bash-3.00# echo $DISPLAY
192.168.1.133:0.0
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display: 192.168.1.133:0.0
bash-3.00# pwd
bash-3.00# find . -name xhost
./usr/openwin/bin/xhost
^C
bash-3.00# /usr/openwin/bin/xhost +
/usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
bash-3.00#
# echo $PATH
/usr/sbin:/usr/bin
I have also gone through the below ... but was not of much help
Unable to execute runInstaller: Check if the DISPLAY variable is set
Plz help
Edited by: [email protected] on Feb 11, 2009 5:16 AM

bash-3.00# echo $SHELL
/sbin/sh
bash-3.00# echo $DISPLAY
bash-3.00# DISPLAY=192.168.1.133:0.0;export DISPLAY
bash-3.00# echo $DISPLAY
192.168.1.133:0.0
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display: 192.168.1.133:0.0
bash-3.00# man xclock
No manual entry for xclock.
bash-3.00# /usr/openwin/bin/xhost +
/usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
bash-3.00#

Could not execute auto check for display colors using command /usr/bin/X11/

Hello,
In a work trying to install ORACLE 11gR2 software in AIX 5.3,
export DISPLAY=local_IPXXX:0.0
xclock
it works, can see the clock.
then go to dowloaded oracle, run
/xxx/11g203_AIX64_5L/database-> ./runInstaller
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' before
you proceed with Oracle installation. rootpre.sh can be found at the top level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 190 MB. Actual 7470 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6144 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/X11/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] n
User Selected: No
any idea to fix?
thanks a lot in advance

thank you for response
in log, it shows
Using paramFile: /xxx/11g203_AIX64_5L/database/install/oraparam.ini
Checking Temp space: must be greater than 190 MB. Actual 7194 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6144 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/bin/X11/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,Continue? (y/n) [n]
User Selected: No
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2012-09-17_04-08-40PM/installActions2012-09-17_04-08-40PM.log
~
--so nothing new as screen shows.
--ok, anonther way, say yes, shows..
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-09-17_04-00-30PM. Please wait ...xxxx:/xxx/11g203_AIX64_5L/database-> Exception in thread "main" java.lang.NoClassDefFoundError: sun.awt.motif.MToolkit (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:130)
at java.awt.Toolkit$2.run(Toolkit.java:864)
at java.security.AccessController.doPrivileged(AccessController.java:192)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:847)
at com.jgoodies.looks.LookUtils.isLowResolution(LookUtils.java:484)
at com.jgoodies.looks.LookUtils.<clinit>(LookUtils.java:249)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:135)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:161)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:161)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:161)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:163)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1812)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:510)
at oracle.install.commons.util.Application.startup(Application.java:780)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:165)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:182)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:348)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:124)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:155)
Edited by: 951932 on Sep 17, 2012 2:12 PM

Auto Color – seeing exactly what it is doing?

Hi Adobe Forum Readers,
Is there a way to see exactly what effects auto color is using to achieve its results?
If so I could manually go in and apply the effects and avoid some of the strobing etc. that auto color creates.
Is this possible?
Thanks,
V.
PS I intend to try and learn some of the manual correctors better however I am color blind so auto color is helpful to me for quick fixes.

The "strobbing" in the Auto correction Effects, Color, Levels, Highlight & Shadow, seems to appear, whenever there is any change in lighting/exposure. They appear to work pretty well with a locked-down camera, with manual exposure, no change the WB and not change to lighting. However, if there is any change, then the strobbing occurs. It reminds me of the old days, with servo-apertures in early auto-exposure lenses, where when the lighting changed, even just a bit, the auto-exposure function would "seek," until it zeroed in on the aperture setting that satisfied its circuits. That "seeking" cause a strobbing, or pulsing, and was very off-putting. Auto-exposure is much better nowadays, and this is seldom seen, or at least noticed. Still, manual exposure is always better.
Not sure where one would get that "under the hood" look at Auto Color though.
Harm has a great idea in post 8, and that would be very helpful.
Good luck,
Hunt

Auto Step functionality in Oracle Forms?

Hello,
I am testing Captivate for possibility to capture test
scenarios for testing in Oracle. I know Captivate has the ability
to create auto steps from Internet Explorer to automatically create
captions that contain text describing your actions.
Is this functionality available in Oracle Forms? I have
tested it many times and Captivate seems to only be able to create
auto steps from the browser and not create any from Oracle. It
still captures everything properly, but not the auto steps. We are
planning on printing these steps for ease of the user, and thus
would like to have the steps in writing as well.
This is what the Captivate Help file says about Auto Text:
"Use the AutoText Captions feature to automatically create captions
that contain text describing your actions. Customize the
appearance, size, orientation, position, and display speed of
captions, including font, size, color, and text formatting. Before
recording, choose the caption type and language, or create and
import your own caption style. Adobe Captivate 3 generates caption
text in many languages."
Thanks a lot.
-Zeb

Welcome to our community, Zeb
At first, you really bowled me a wobbly with the description
of "auto step functionality".
It's been my experience that Captivate's ability to properly
recognize elements of an application are pretty much hit and miss.
To be honest, I'm surprised that it does as well as it does. But
that's with normal desktop applications. Toss in something that's
browser based (as your situation seems to be) and I'm surprised it
works at all.
I'm sort of stabbing in the dark here, as I'm not an
application programmer. But I'd guess that what is happening is
Captivate is only sensing an object in the browser and it has no
idea as to how to interpret the fields and whatnot that make up the
object.
I know it's a nice feature when it works. However, I do hope
you are aware that you aren't limited to what Captivate gives you
with this. You are totally able to insert your own Text Captions at
any time on any slide by clicking Insert > Text Caption.
Cheers... Rick

Auto Color Effect Issue

When I put the Auto Color effect onto a clip, it does an extremely good job of correcting colour but the movie clip (1080p from a Canon dSLR) then appears to flicker, even after rendering? Does anybody know what I need to do to correct this?
Thanks.

Most of the "Auto" Effects suffer from what you describe. They really only work so long as everything, the exposure, the lighting, everything, is uniform for the whole Clip.
Most use one of the Color Correction Effects, and not Auto Color, Auto Levels, etc.
About the only way to get the Auto Color to function, when the Clip is not uniform, is to Razor the Clip, when there are change in lighting, or exposure, but that is tedious.
Good luck,
Hunt

Work Around for Running Color w/Graphics Card that has 64mb VRAM?

Before upgrading to Leopard I was able to run Color in Tiger on my Powermac G5 that has a video card with only 64mb VRAM (see specs at bottom). Now I am in a bit of a crunch and have some footage that was shot using auto white-balance that I'm hoping Color will help me fix by using it's auto color correction feature. (I have pure white objects in the background, so I don't think it should be that difficult to auto color correct every frame, just processor intensive) When I open up Color in Leopard it gives me the message: "Color recommends that your system have 128mb of VRAM; this system has only 64MB of VRAM." Here's a link to the window that popped up:
http://salsunproductions.com/misc/color_error.jpg
Anyways I was wondering if there was some sort of work-around so I could just jump in and get this project done in Color and out the door. I don't have the time to go out and find out where to purchase my next graphics card. Also, if there is any other application, or plug-in for Final Cut Studio 2 that might be able to help me do auto-color correction I would appreciate any suggestions. (yes, I can keyframe the whole video in final cut's 3 way color corrector but that would take forever since the white balance changes ever 3 seconds.)

salilsundresh wrote:
Also, if there is any other application, or plug-in for Final Cut Studio 2 that might be able to help me do auto-color correction I would appreciate any suggestions. (yes, I can keyframe the whole video in final cut's 3 way color corrector but that would take forever since the white balance changes ever 3 seconds.)
The Auto function in Color, like in FCP, is static. It doesn't continuously analyze the image making continuous changes.
I don't have any other suggestions for you other than to keyframe (either in FCP or Color).
- pi

Text - Auto Scroll Function

Does my iPad have an Auto Scroll for Safari?
Is there a "hidden" feature that I can use for reading a text with Safari?
An automatic scroll (activated by an command) would be a comfortable function.
I don´t want to use an App.
Thanks

Tap and slide up to scroll. Tap and flick up to move faster.
There is no way I know off to have the screen automatically scroll.
The iPad has many security features to prevent malware attacks. One of these is called Sandboxing. This keeps each app in its place and prevents apps from altering the system resources or other apps. So no other app will provide the auto scroll functionality to Safari.
You can make suggestions to Apple here:
http://www.apple.com/feedback/

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

Seeking for Auto color function

Similar Messages

Maybe you are looking for