Help needed in retrieving account description present in PO distributions

Hi All,
I have written a query to retrieve purchase orders and it's distributions. I need to retrieve account descrption related to distributions. I have got account number from gl_code_combinations table(segment1 to segment5). I am not able to proceed further in getting account description. Please suggest which are the tables and what is the link between them.
Thanks and Regards,
Mahesh

Hi,
Please find my comments below:
Thanks for the reply
Welcome
If we link with fnd_flex_values_vl and gl_code_combinations, number of records is increasing i.e records are repeating.
add condition flex_value_set_id
Also account number will be like 01-0101-0101-1010, so this means that account number is flex field. Then i think we have to use flex field tables. But i am not able to find out which are the tables and what is the link between them
Account number is a combination of Segments. You cannot find total combination anywhere. You have to take Code combination id, get the segments, link the segment with fnd_flex_values_vl with particular value_set_id and display the description against that segment.
Finally you have to concatenate all the segment descriptions.
Regards,
Sridhar

Similar Messages

  • Help needed to retrieve missing messages and folders; though items still present

    Something happened, but I am not sure what.
    TB had difficulty loading, and then afterwards one of my folders [ a sub-folder of Inbox ] was duplicated, and all of its sub-folders were missing.
    if I search for a keyword to locate a message w/in on of the sub,sub folders , I find the messages ARE listed in the results panel, and the filter dialogue on the left side lists the folder name [ that is missing ] that they were in. However if I click on the message to load it in a new tab, the tab is blank
    I tried the 'properties;repair folder' but I get only a 'busy' symbol [ spinning green circle ] and no eventual change.
    Help!

    Hi Essjay32,
    Welcome to Nokia Support Discussions!
    What you could do is to install the latest Nokia Suite beta, which can upload your contacts to Skydrive. When you get your Lumia 900, you can just use that Microsoft account as your main account and the contact data should be there waiting for you. Unfortunately, it is not possible to transfer your messages to a Lumia phone, you can however store your existing messages on Nokia Suite. 
    When connecting your phone to your computer (using a USB cable), press the menu button, as it will set up your phone in Nokia Suite mode. After this you should be able to access your phone data and upload it to Skydrive.
    Hope this helps!
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Help needed too make a flash presentation with sound

    Hi Folks,
    I've recently kicked off a 'not - for - profit' project to raise awareness of the effects of Post Traumatic Stress Disorder in Veterans.  I've been trying to make a flash video with an MP3 sound clip and slide images but I'm having makor problems with getting the file made.
    Is there anyone around that would be able to help with this project by making the presentation video for me?  I wouldn't be able to properly pay the person as funds are very restricted but I'd be happy for a credit to go in at the end of the video kisting you as 'producer', or something similar.
    This video has to be made to coincide with Veterans week in the UK  - 19-27 June 2010, so needs to be made and then uploaded ASAP.
    I can offer a nominal payment of £10, as a thank you once the file's completed and running.  I can't cope with making the file because of my disability, so I hope someone can help me.
    Regards
    RAF Veteran

    onclipevent(load)                                           
    total=_root.getbytestotal();                             
    onclipevent(enterframe)
    loaded=_root.getbytesloaded();
    current=int(loaded/total*100);
    p=""+current+"%";
    if(loaded==total)
    gotoandplay("Scene 2",1);
    sorry for getting the code and coment mixed up.

  • Help needed in retrieving data

    Hi,
    I have a table
    ego_attrs which stores column names of a table ego_mtl_sy_items_ext_b.
    ego_attrs ego_mtl_sy_items_ext_b
    col1 col1 col2 col3
    col2 x1 x2 x3 (Data)
    col3
    I'm supposed to retrieve the column names from ego_attrs and compare with the columns of ego_mtl_sy_items_ext_b table and retrieve the entire row and update another table(cn_comm_lines_api_all) by the data extracted from ego_mtl_sy_items_ext_b table. Can anyone help me on this.
    Thanks,

    This may not be the correct answer. But I think it is possible with the help of functions (which returns the primary key of the table), retrieve the data with that primary key and with the help of execute immediate statements you can update the row.
    store the values in some variables and insert those values in your new table.

  • Screen broken. Help needed to retrieve data.

    Hello.
    I hate to be a pain, however recently I broke the screen of my Nokia N97 Mini (both display and touch are broken. completely buggered I'm afraid)
    The keypad still works, however, I just can't see anything.
    Now I've just ordered a Lumia 900, however before it arrives I want to figure out how to transfer all my text messages, contacts and so on from the old phone to the new one. Does anyone have any suggestions? Places I should go or accessories I could buy?
    I know that when I moved from my E72 to the N97 there was a program which did it all for me, does the Lumia come with the same program, and if so, how do I access the N97 side of things without a screen? Thanks again for any help.
    Jess.
    Solved!
    Go to Solution.

    Hi Essjay32,
    Welcome to Nokia Support Discussions!
    What you could do is to install the latest Nokia Suite beta, which can upload your contacts to Skydrive. When you get your Lumia 900, you can just use that Microsoft account as your main account and the contact data should be there waiting for you. Unfortunately, it is not possible to transfer your messages to a Lumia phone, you can however store your existing messages on Nokia Suite. 
    When connecting your phone to your computer (using a USB cable), press the menu button, as it will set up your phone in Nokia Suite mode. After this you should be able to access your phone data and upload it to Skydrive.
    Hope this helps!
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Help needed to retrieve vital voicemail.

    Can anyone help?
    I saved my voicemail for 7 days, it came in last Sat at 1734, i had reason to listen to it on Thursday and pressed 7 again after it to save it for another 7 days, with the intention of saving it for another 7days and so on.
    I went to retrieve it tonight again and it wasn't there, this message is vital, i checked on the web to see how to retrieve deleted voicemails and followed the instructions but when i press the voicemail option it calls it.
    i canont do a reset as i have too much on my phone as it's a company phone, i don't want to reset the network settings as i am unsure if they just come back as per normal.
    Any suggestions on how to retrieve this voicemail would be appreciated, i called vodafone to see if a message could be retrieved and was told no.
    I am desperate for help.
    thanks

    wjosten,
    thanks i did, i called vodafone right away when i noticed it was gone despite saving it, and they just said no, you cannot retrieve it. 
    Ths should be a warning to users that despite saving it, and it sayin "this message is saved for 7 days" it doesn't!
    Do you know how to get voicmail virtual and if so will it have the deleted message on it.
    thanks for your help.

  • Help needed - moved user accounts

    I did an upgrade install on my Dual G5 today, but Leopard doesn't know where my users' files are located. I have a very fast (but smaller) HDD for the OS, and moved my user files to a larger HDD. The links were not carried over in the upgrade/install.
    I believe it was a post from Kappy that helped me in moving my user folders initially. Can anyone help me with the needed command line entries needed so that Leopard knows to look to the other HDD for my users?
    Thanks-Gary

    If you've reached the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over. By the way, this has nothing to do with the number of products you've purchased and registered. The reason for this is that you have a limit of 5 computers on which you can play purchased content: About iTunes Music Store Authorisation and Deauthorisation
    If your system crashes or your reinstall your operating system without deauthorising iTunes first, even a single computer can use up your limit of 5 authorisations. See also this article: One computer using multiple iTunes Music Store authorizations

  • Help needed. Itunes account cannot be verified. Need to sync iPhone 3G.

    I created an account last Wednesday and verified my account using my e-mail address many times. However, I am not able to log in and iTunes keep on saying I have to verify my account.
    Already contacted apple support group with Track ID 8352210. Though I have not received any reply from them after I replied to them with the information needed.
    It's been 4 days now and I really need to download applications on my Iphone 3g since it is such a useless brick compared to other competing cellphones in the market.
    Hope I could utilize my gadget soon.
    Thanks,
    Miss Maria

    Thanks, I turned genius off and now I can actually sync my phone! I was really excited about genius though . When I tried to turn on genius again (to see if it would work this time) it gives me an error that says: *"Genius results can't be updated right now. An unknown error occurred (-50). Please try again later"*. It works fine when it collects data about my library but it's when it tries to send the info to Apple when it shows me the error. I'm guessing that this is an issue with the itunes servers and not with my PC but we'll see.

  • Help needed to retrieve deleted trash

    help--- very frustrated... working in my DRAFTS OUTLOOK EXPRESS IMPORT FILES-- my life!!!.. wanted to delete "Trash" as it seemed I have 2 trash bins... but my old Drafts folder in my Outlook Express Import folder was attached to the TRASH AND NOW EVERYTHING IS GONE.. DO I have to get tech support to come to my house to retrieve this?

    have you looked in your deleted folder? everything, including folder you delete goes there unless it is to large and you get a warning dialog if that is the case.

  • Help needed-setting up account online

    Hi everyone looking for a bit of advice.
    I used to have a bt sport account with BT which i used to log in with my current e-mail address. When i moved house i left sky phone/broadband, cancelled my bt sport and took out BT phone/broadband account but it is still assuming i have a bt log in with my  email address - linked to my old account. This is preventing me from being able to register on with my email address to my new account.
    Any ideas how to get this fixed?
    Any help appreciated.
    Thanks

    I only meant for the initial signup e.g. bobbobbins@ hotmail or gmail - something like that.
    I assume once you have the initial signup you would then be issued with a new BT email account which you then use for your BT Id - and sport etc? E.g. [email protected]
    Have I misunderstood - is it an existing BT email account that you have that you wish to keep?

  • Help needed in retrieving parent child relationship values

    Hi,
    I have a requirement to get parent child relationship values as below.
    Ex: Address table
    cont cont_code state state_code
    C1 10 S1 1
    C1 10 S2 2
    C1 10 S3 3
    C2 20 S4 4
    C2 20 S5 5
    C3 30 S6 6
    C3 30 S7 7
    C3 30 S8 8
    I want a result of country/state and corresponding code like below.
    corresponding states should be displayed under each country with some space appended to it.
    Geography code
    C1 10
    S1 1
    S2 2
    S3 3
    C2 20
    S4 4
    S5 5
    C3 30
    S6 6
    S7 7
    S8 8
    I am using oracle 10g version.
    Thanks in advance.

    Hi,
    When you post formatted text (like your output) on this site, type these 6 characters:
    \(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
    I think you're saying that you want this output:GEOGRAPHY CODE
    C1 10
    S1 1
    S2 2
    S3 3
    C2 20
    S4 4
    S5 5
    C3 30
    S6 6
    S7 7
    S8 8
    If so, UNION, as Hoek suggested, is a good way.
    GROUP BY ROLLUP is more efficient, but harder to understand:SELECT     CASE
              WHEN GROUPING (state) = 1
              THEN cont
              ELSE ' ' || state
         END          AS geography
    ,      CASE
              WHEN GROUPING (state) = 1
              THEN MAX (cont_code)
              ELSE MAX (state_code)
         END          AS code
    FROM     t
    GROUP BY cont
    ,      ROLLUP (state)
    ORDER BY cont
    ,      state          NULLS FIRST
    By the way, this looks like a bad table design.
    In a relational database, the fact that the name 'C1' belongs to cont_code 10 should only be stored in one place.  You have the same information on 3 separate rows.
    Also, if 'C1' and 'S1' are both names, they should probably be in the same column, so that (to give just one example) you can find the information about 'x1' without knowing if it is a cont or a state.
    A better design would be.NAME     CODE     PARENT     DSCR
    ====     ====     ======     ====
    C1     10          CONT
    S1     1     10     STATE
    S2     2     10     STATE
    S3     3     10     STATE
    C2     20          CONT
    S4     4     20     STATE
    S5     5     20     STATE
    C3     30          CONT
    S6     6     30     STATE
    S7     7     30     STATE
    S8     8     30     STATE
    If the data is this simple, then the dscr column isn't needed.  Whether parent is NULL or not tells whether the rows represents a cont or a state.
    To get the results you want from a table like this, you could use CONNECT BY.  Using either UNION or ROLLUP, you have to know, at the time you write the query, how many levels there will be in the parent-child tree, and the length of the code is proportional to that depth, and the table has to be changed if you ever need to add another level.  CONNECT BY can handle any number of levels, and the length and complexity of the code is the same whether you have just 2 levels (countries and strates), or 7 levels (continents, regions, countiries, states, districts, cities and neighborhoods) or 72 levels.  The table doesn't need any more columns, no matter how deep the tree gets.
    Edited by: Frank Kulash on Sep 16, 2010 11:54 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Help needed with two accounts

    I know this is not the correct place for this post but didn't know were else to put it.
    My daughter has an ipod shuffle, which is set up under my name and email address on the account.
    I know have an ipod touch and have my own account with the same email address only my daughters credit from her account appears in mine.
    I would like her to have her account now with her own email address etc but how do you alter the details and transfer her balance? Plus will she lose her music if she does this?
    Thanks in advance!

    XH558 wrote:
    If a new account is created for either myself or my daughter what happens to all the music/apps we have downloaded?
    authorize iTunes to play/use content purchased with both accounts.
    that's basically very easy. all you have to do is +log out+ of one account (click on the account name in the Store window and select +sign out+ from the pop-up dialog) and into the other, and then they will both be authorized. (be sure to just *log out*, not de-authorize ).
    JGG

  • Help needed on POP accounts

    Mail crashed the Mac (Kernel Panic) and I restarted. Mail then said it was damaged and to quit. I did. I relaunched and mail rebuilt the messages. But it left all 9 of my POP accounts out. I see no way to add them back except the tedious process of re-entering each one.
    Dual G5/2ghz machine, 10.5.1.
    Can anyone tell me how to get Mail to recognize the previous account setup?

    Can you go to homefolder/library/mail, and in that mail folder, what do you see? a folder for each of your pop accounts by any chance?
    Do you have time machine on by any chance? If so then you could search just before the crash and locate the homefolder/library/preferences and looking for the file com.apple.mail.plist, and copying that file to your homefolder/library/preferences on your mac.
    else you may have to manually re-enter each account
    hope this helps

  • URGENT -Help Needed, Windows Email Accounts & Address Book from Outlook Exp

    Okay, purchased an iMAC, took the old WINDOWS disk, placed in EXTERNAL ENCLOSURE and was wondering, is there a way to get that .DAT outlook file (on the external now, that OSX sees) and somehow convert or import to MAC MAIL so I can get the address book and all the emails?
    Thanks. Am sure this has been a concern - appreciate the help.
    Thank you again.

    i would first suggest you go to an apple store next to you - if there is one of course - and let a genius do the transfer for you, no hassle, quick and painless...
    if you do not wish to do so, or are not close to an apple store, then you may want to read this link: http://www.apple.com/getamac/movetomac/network.html and follow the instructions to migrate.
    hope this helps

  • Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

    Help needed,
    I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still  I cannot login I to my itune account. Same message keeping. Popping up,  this problem started supricly today.

    Take a look at the instructions here.
    http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

Maybe you are looking for