Help needed with using network disk with iMovie with NFS or AFP

Hi,
I have iMac with iMovie08 that talks to a remote disk hosted under Linux over a gigabit network using SMB (Samba). It all works ok and I have done a few movies.
Now, I have done some tests with NFS and AFP (AppleTalk) and it seems that these are much faster than SMB.
I then stopped the Samba server and proceeded to setup NFS and also AFP
First NFS,
So I then exported my directory using NFS and I can see everything from my Mac (correct permissions too since I made both user and group IDs the same...). The problem is that when I launch iMovie it shows me the Volume for my external networked disk but it shows it with a little triangle with yellow exclamation and it does not show any of the events (>500GB of events).
If I stop NFS and then switch to AFP I get the same behavior. That is, everything from the Mac works on the AFS mounted disk (copying files back and forth, etc....) but I can't see the contents of the disk from within iMovie
I changed permissions so that anybody can read/write/execute (although there are files that have an '@' sign at the end when I do ls -l on them and I can't remember what that means....)
If I stop NFS and then go back to SMB (Samba) then I am back to a working configuration.
Can I use NFS or AFP with iMovie? What exactly does the yellow triangle mean?
Thanks
Dazed and confused at 330am EST...

More timings on smb vs nfs. Note that the big diffs is when sending single large files. The dd cmd was used to simulate 1 hour of DV video which is about 12GB
1.27GB dvd project (twice each, note the variability... I guess because the project has multiple files?):
MEiMac:Movies me$ time cp -r LS2000Berlin.dvdproj /Volumes/bigsmb/
real 0m37.114s
user 0m0.008s
sys 0m4.164s
MEiMac:Movies me$ time cp -r LS2000Berlin.dvdproj /Volumes/bignfs/
real 0m59.351s
user 0m0.009s
sys 0m8.336s
MEiMac:Movies me$ time cp -r LS2000Berlin.dvdproj /Volumes/bignfs/
real 0m40.671s
user 0m0.009s
sys 0m8.205s
MEiMac:Movies me$ time cp -r LS2000Berlin.dvdproj /Volumes/bigsmb/
real 0m41.680s
user 0m0.008s
sys 0m4.094s
Simulated 1 hour video single file:
MEiMac:Movies me$ time dd if=/dev/zero of=/Volumes/bigsmb/1hour bs=16k count=786432
786432+0 records in
786432+0 records out
12884901888 bytes transferred in 443.960166 secs (29022653 bytes/sec)
real 7m23.994s
user 0m3.434s
sys 1m18.900s
MEiMac:Movies me$ time dd if=/dev/zero of=/Volumes/bignfs/1hournfs bs=16k count=786432
786432+0 records in
786432+0 records out
12884901888 bytes transferred in 235.887283 secs (54623131 bytes/sec)
real 3m56.271s
user 0m1.666s
sys 1m56.995s

Similar Messages

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

You Cannot Use This Version of iMovie With This Version of Mac OS X

+*Cannot Use This Version of iMovie With This Version of Mac OS X*+
Yes, I can. iMovie just doesn't want to cooperate. I checked the requirements, it says:
an Intel-based Mac, a Power Mac G5 with dual 2.0 GHz or faster processors, or an iMac G5 at 1.9 GHz or faster.
Well, I meet the requirements, I have an iMac G5 with 2.0 GHz, also with Leopard.
Why can't I use iMovie.
Message was edited by: Qwedgeonline

Oh, NVM I had to download the newest update!

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?

At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

Href and target tags tutorial/help needed for use with an existing website

I have a website, (built through iweb), and an intro movie. I have spent a lot of time trying to understand the proper tags and how to use them without much luck. My goal is to have the homepage associated with my domain name load in a browser while at the same time have my intro movie open in a Quicktime Player window, play, and automatically close leaving the webpage visible. If anyone can point me to a tutorial or walk my through the process I would appreciate it.

Poster movie style. Requires QuickTime Pro:
Create an image (or a frame from your movie). This becomes the "poster". You could add text to it (Click to Play) in a graphic editor app to help your viewers or add text to the page under the image with these instructions.
Save this new file as poster.mov
It becomes the src="poster.mov" (source tag in the html code). Set its dimensions to fit your page layout.
Your "intro movie" will be your href="intro.mov" (href tag in the html code).
Open it with QuickTime Pro and then open the Movie Properties window. Click on the Presentation tab to see the choices. Automatically close option will close the QuickTime window. Automatically quit option will quit the running QuickTime Player app. This would be a better option as the browser should come back as the "front" application. You also want to check "auto play".
Use Save As (preserves fast start feature) and name this file intro.mov
In your html code for the QuickTime files you need to set target="quicktimeplayer" (this launches the QuickTime Player app instead of using the browser plug-in). It may also help if you use the full URL to both files in each tag (http://myserver.com/foldername/intro.mov).
One of mine as an example. It uses automatically close window:
http://homepage.mac.com/kkirkster/mycareerfuture/
View the source code to see the tag structure. My page uses javascript instead of the older object/embed tag code.
More useful links:
http://developer.apple.com/internet/ieembedprep.html
http://www.qtbridge.com/pageot/pageot.html

Problems using dbms_scheduler with attached network disks

Oracle 11.2.0.1
I created a job which run .bat - files.
dbms_scheduler.create_job(
        job_name => 'JOB_FILES',
        job_type => 'EXECUTABLE',
        job_action => 'e:\dump\abc.bat',
        auto_drop => FALSE,
        enabled => TRUE);
Content of abc.bat is
"E:\Oracle\product\11.2.0\dbhome_1\BIN\7za a e:\dump\den3_arch_171020131420.zip x:\mtr\"
Im trying to make an archive with files in some folder. In this example the folder is "x:\mtr\" where "x" is attached network disk.
When i run this job It creates null archive and raises error
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
If in "abc.bat" i change network disk "x" to server disk with existing folder all works properly(It archives all files).
If i execute "abc.bat" from cmd window all works properly(It archives all files).
Ive created java source
create or replace and compile java source named "OSCommand" as
import java.io.*;
public class OSCommand{
public static String Run(String Command){
try{
Process p = Runtime.getRuntime().exec(Command);
p.waitFor();
return("0");
catch (Exception e){
System.out.println("Error running command: " + Command +
"\n" + e.getMessage());
return(e.getMessage());
and pl/sql function
CREATE OR REPLACE FUNCTION OSCommand_Run(Command IN STRING)
RETURN VARCHAR2 IS
LANGUAGE JAVA
NAME 'OSCommand.Run(java.lang.String) return int';
And it works like dbms_scheduler...
May be user need any special grants?

user617289 wrote:
Thats right. How can i resolve this issue?
when all else fails Read The Fine Manual
DBMS_SCHEDULER

Help needed to track down Problem in tiger with Pioneer DVR-110D

ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
PatchedAppleNVRAM:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
kext Version: 3.0
Load Address: 0x4db000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
OpenPMUNVRAMController:
Version: 2.0
Last Modified: 8/9/05 6:08 PM
Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
kext Version: 2.0
Load Address: 0x63a000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
GossamerDeviceTreeUpdater:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
kext Version: 3.0
Load Address: 0x63d000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
Integrity: Unknown
that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto

Upgrading iMac to Leopard using Leopard disk that came with Macbook Air

I recently go a Macbook Air. I would like to use the Leopard install disks that came with the Air to upgrade my Intel iMac. When I try to install using the Air install disks I get an error saying that the upgrade is not possible.
Not sure if its not possible because of certain configuration restrictions or maybe I'm not supposed to upgrading because of copywrite restrictions.
Thanks,
Joel Simkhai

No problem Rodney. I an understand your frustration with the issue.
Hopefully this reminds you that education is probably the best way to combat piracy. The second best way, in my opinion, is to give consumers one of the options what they want - the ability to download software, movies, music, etc without cumbersome restrictions. Probably doesn't make sense for most people to download a whole operating system-but the day is approaching. Personally, I think the future of installed software that needs to be manually upgraded are numbered. Instead we'll probably see the operating system and all needed software customized for the user hosted on centralized (hopefully encrypted, secure, backup-ed and private) servers.
Joel Simkhai

Can i go back to the previous version, i have a plug in i need to use that does not work with ver. 4

I have norton's password manager which i use many times per session. It is not supported by MF 4.0. I really need to go back to the previous version.

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

XML Parse issues when using Network Data Model LOD with Springframework 3

Hello,
I am having issues with using using NDM in conjuction with Spring 3. The problem is that there is a dependency on the ConfigManager class in that it has to use Oracle's xml parser from xmlparserv2.jar, and this parser seems to have a history of problems with parsing Spring schemas.
My setup is as follows:
Spring Version: 3.0.1
Oracle: 11GR2 and corresponding spatial libraries
Note that when using the xerces parser, there is no issue here. It only while using Oracle's specific parser which appears to be hard-coded into the ConfigManager. Spring fortunately offers a workaround, where I can force it to use a specific parser when loading the spring configuration as follows:
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl But this is an extra deployment task we'd rather not have. Note that this issue has been brought up before in relation to OC4J. See the following link:
How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3
My question is, is there any other way to configure LOD where it won't have the dependency on the oracle parser?
Also, fyi, here is the exception that is occurring as well as the header for my spring file.
org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException:
Line 11 in XML document from URL [file:/C:/projects/lrs_network_domain/service/target/classes/META-INF/spring.xml] is invalid;
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
     at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:396)
     [snip]
     ... 31 more
Caused by: oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
     at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:425)
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:331)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:222)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:75)
     at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:388)Here is my the header for my spring configuration file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:aop="http://www.springframework.org/schema/aop"
       xmlns:tx="http://www.springframework.org/schema/tx"
       xmlns:context="http://www.springframework.org/schema/context"
       xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
       http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd
       http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd
       http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">Thanks, Tom

I ran into this exact issue while trying to get hibernate and spring working with an oracle XMLType column, and found a better solution than to use JVM arguments as you mentioned.
Why is it happening?
The xmlparserv2.jar uses the JAR Services API (Service Provider Mechanism) to change the default javax.xml classes used for the SAXParserFactory, DocumentBuilderFactory and TransformerFactory.
How did it happen?
The javax.xml.parsers.FactoryFinder looks for custom implementations by checking for, in this order, environment variables, %JAVA_HOME%/lib/jaxp.properties, then for config files under META-INF/services on the classpath, before using the default implementations included with the JDK (com.sun.org.*).
Inside xmlparserv2.jar exists a META-INF/services directory, which the javax.xml.parsers.FactoryFinder class picks up and uses:
META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines oracle.xml.jaxp.JXDocumentBuilderFactory as the default)
META-INF/services/javax.xml.parsers.SAXParserFactory (which defines oracle.xml.jaxp.JXSAXParserFactory as the default)
META-INF/services/javax.xml.transform.TransformerFactory (which defines oracle.xml.jaxp.JXSAXTransformerFactory as the default)
Solution?
Switch all 3 back, otherwise you'll see weird errors. javax.xml.parsers.* fix the visible errors, while the javax.xml.transform.* fixes more subtle XML parsing (in my case, with apache commons configuration reading/writing).
QUICK SOLUTION to solve the application server startup errors:
JVM Arguments (not great)
To override the changes made by xmlparserv2.jar, add the following JVM properties to your application server startup arguments. The java.xml.parsers.FactoryFinder logic will check environment variables first.
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
However, if you run test cases using @RunWith(SpringJUnit4ClassRunner.class) or similar, you will still experience the error.
BETTER SOLUTION to the application server startup errors AND test case errors:
Option 1: Use JVM arguments for the app server and @BeforeClass statements for your test cases.
System.setProperty("javax.xml.parsers.DocumentBuilderFactory","com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl");
System.setProperty("javax.xml.parsers.SAXParserFactory","com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl");
System.setProperty("javax.xml.transform.TransformerFactory","com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl");
If you have a lot of test cases, this becomes painful.
Option 2: Create your own Service Provider definition files in the compile/runtime classpath for your project, which will override those included in xmlparserv2.jar.
In a maven spring project, override the xmlparserv2.jar settings by creating the following files in the %PROJECT_HOME%/src/main/resources directory:
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl as the default)
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.SAXParserFactory (which defines com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl as the default)
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.transform.TransformerFactory (which defines com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl as the default)
These files are referenced by both the application server (no JVM arguments required), and solves any unit test issues without requiring any code changes.
This is a snippet of my longer solution for how to get hibernate and spring to work with an oracle XMLType column, found on stackoverflow.

Crash install Reader 9.x with large network disk

I want install new version, but installation crashed. Expand is OK. Next open window "Error: 1327. Invalid disk: H:\". Disk H: is network disk. I redirect folder Documents to this disk. This disk is large (998 GB free). OS: Windows Vista Business (32 and 64 bit).

When I redirect folder "Documents" back to local disk, that instalation is OK.
"C:\Users\ovasicek.MTSYSTEMS\Documents"
Thak you

PLEASE HELP!! USE TIME MACHINE & RESTORED IMOVIE PROJECT CANNOT BE OPENED

Please HELP!!!! Imovie yesterday didnt save any of my project changes so I redid them today. And after I just closed Imovie again it did not save my changes from today. Thats 2 days of editing with no record of the changes
I use Time machine but I have never needed to restore anything. I have gone into time machine, found the file, hit restore and saved it on my desktop but I am not finding the file in imovie.
When I click on the file and select open in imovie it is not opening or if it is, it is not the file with the changes when it diverts me to imovie. So basically I can see the file in Time machine, I am restoring it to my computer but I cannot locate it in imovie with the changes. I can see the file on my desktop but i cant open it to view other than in imovie which ofcourse isnt showing the changes.
PLEASE HELP!!! IM DEVASTATED!!!!
I am working from an external hard drive. Yesterday I had the prompt appear that I had no more disk space (on my computer) so today i deleted a bunch of things and didnt get that prompt. And in anycase i am working off an external.
Please help me!!! I need a saviour!!!

Have you tried deleting iMovie's preference file?
Close iMovie and go to your Home folder(YourUserName)/Library/Preferences/com.apple.imovie.plist
Drag this plist file to the Trash. Don't worrry; iMovie will create a new fresh one when you relaunch it.
Reopen iMovie and see if it works ok now.
By the way, if you have more than one iMovie version on your computer, be sure to trash the correct plist.
iMovie 6 is 'com.apple.imovie.plist' but iMovie 8 is 'com.apple.imovie7.plist' and I expect that iM9 would be 'imovie8.plist' If you find only the one plist and you have only one version of iM, just trash that one.
Post back if this does not help.

Help Needed Created Standalone Network for iTunes DJ

I use my MBP to manage backing tracks for a band. I would like to use iTunes DJ for requests from the audience via wireless connection via *iPhone/iPod Touch Remote app*. I would use this option in conjunction with a printed song list and small request cards (for those who don't have iPhones).
I can't connect to an existing network as most venues do not have wireless. I would like to set up my MBP as a wireless base station that can be accessed via an iPhone/iPod Remote app. Besides, I would prefer to have a network that echo's the band's name.
I know I have to use the "*Create computer-to-computer Networks*", but I am unsure of what settings I need to get the network working.
I will use Locations to quickly activate the MBP as the base station.
Any help or suggestion setting up my MBP as a wireless base station would be greatly appreciated.
TIA

TSG wrote:
yep, tried changing cables....even upto cat6!!! no joy.
starting to do my head in now.....might call in a network person/tech but i hate the idea of being charged to see him repeat all i have already done!
Agreed. I'd keep at it yourself. I guarantee it will be something simple.
what are the benefits of a switcher? (never used one before) any recomends?
A switch is just like a hub, except that instead of always sending packets to your entire network, it only sends them where they need to go. The benefits grow with the size and speed of your network. Switches used to be much more expensive than hubs but not any more. Normally I'd recommend almost any Linksys device, but in this case dlink seems to have a better one:
http://www.amazon.com/D-Link-DGS-2205-5-port-Desktop-Switch/dp/B000FIVDIA
Again, I don't think your dlink hub is responsible for this dramatic bottleneck though.

Help needed with using network disk with iMovie with NFS or AFP

Similar Messages

Maybe you are looking for