HELP - No Wireless Connection

HELP
I HAVE A LENOVO DESKTOP WITH WIRELESS CONNECTION TO MY HP PRINTER.
I HAVE A LENOVO DESKTOP WITH WIRELESS ROUTER FOR INTERNET.
BOTH ACTIONS CONTINUOUSLY FAILED AT 100% OF THE TIME!!!
I HARDWIRED MY HP PRINTER ... AND ALL PROBLEMS WERE RESOLVED!!!
YESTERDAY, I TRIED TO HARDWIRE MY ROUTER FOR THE INTERNET ... I PLUGGED IT INTO, THE 1 AND ONLY SPOT, ON MY LENOVO, YET THERE WERE MULTIPLE (4-5) SPOTS ON MY COX ROUTER!!!
SO ... I STILL CONTINUE TO GET "DIAGNOSE CONNECTION PROBLEM ERRORS"!!!
HOW DO I SEE THAT THE CONNECTION IS HARDWIRED, AND WILL NOT FAIL EVER AGAIN!!!
THANKS,
ALLEN GUIDRY

Don't shout...
Anyway,
Setup your wireless network like this
Router:
SSID: MYLAN
WPA/PSK: password
Connect PC to Wireless network using above credentals or plug it into the wired LAN
Connect HP Printer to wireless network
Uninstall whatever HP software you installed
Download new HP drivers/application from support.hp.com enter your model number in the search box to get the driver specific for your printer
Run the program you downloaded from HP and follow the instructions exactlly
Somewhere in the installer it will ask you if your printer is USB or Network (wired/wireless) select network.
hit next a lot of times, and with any luck it should work. If not, call a local computer repair company.
-Cheers

Similar Messages

[Help] [Laptop] Wireless connection setup

I am currently having trouble setting up wireless connections on a laptop using, of course, Arch. I have read almost all the wikis and am still having trouble doing this. Could someone explain the steps needed to do this? Oh and some side notes, I am doing this in virtual box now, but same laptop. Thanks.

Please read the Forum Etiquette on How to Post, notable the sections on post titles, and how to ask questions the smart way.
No-one here will spoonfeed you the steps you need (which depend on factors that you have not included in your post). Work your way through the wireless page on the Wiki and, if you encounter difficulties, post back with what you tried and any errors...

Help with wireless connection between 2 macs.

I have an iMac and BookPro, both intel. They are both connected wirelessly to a 1TB Time Capsule.
I want to transfer files between the 2 computers so I have done the following steps:
1. Enabled file sharing on both computers.
2. Checked the AFP box option on both computers.
3. Made sure that users can Read/Write on both computers.
Now, I can see the icons for both computers in the sidebars, but only my BookPro allows me to actually connect to my iMac when I click the iMac icon in the sidebar.
When I click the BookPro icon in the iMac sidebar,the connection fails.
What am i doing wrong?
I have already tried deleting the com.apple.NetworkUtility.plist file, and rebooting.

The there is no password needed when clicking the sidebar icon. It connects as a regular user.
However, when pressing the "connect as" button, it never asks for a password. The connection fails.

Help with wireless connection

Hi all,
I bought a Power Mac G4 AGP graphics in a yard sale for my kids. It works great but I don't know how to connect it to the internet. It has a 400Mhz processor and 896 SDRAM. The operating system is OSX 10.4.11.
I have another computer (PC Sony) on the second floor with a Linksys 2.4 Ghz router for a wireless network at home. I use a laptop and Ipod touch with this network and it works well.
The question is: What type of card or device I need to buy to connect it to my home wireless network. I have been reading about "Air Ports" but its pretty confusing and I don't want to buy the wrong thing. Also, since it's an old computer, I don't know if the configuration will affect the speed of navigation (I have a Verizon DSL line at home).
Thanks for any advise.
Felipe

Hi Felipe and Welcome to Apple Discussions,
Well what japanamac and motsteve are talking about are PCI adapters for the faster 802.11g Airport Extreme cards.
This is the more conventional solution:
http://eshop.macsales.com/item/Apple/M7600LLE/
If you open up your G4 with the door facing you it mounts the bracket you see in the upper left front. Like most of these it goes in upside down, thru the bracket and plugs into the socket you see there. The antenna is usually stored in that area also.
Here's the Apple site:
http://docs.info.apple.com/article.html?artnum=58536
That adapter in #5 is for a G3 iMac and doesn't have anything to do with that we're about here.
Richard

Wireless Connection Help re WRT54G router

I was able to wire my desktop pc easily to the router and have internet access (through Comcast). However, I can't seem to connect my laptop wirelessly. Don't have a clue what I am doing wrong. Any instructions - suggestions would help.

Hi!
this might help
No Wireless Connection on WRT54G
(Mod Note : Added hyperlink to avoid page from stretching)
Message Edited by Beetlebum on 10-12-2006 12:16 PM

Printer loses wireless connection after some hours

Hello to all!
Printer is connected and I can see on the screen correct IP. Desktops with Win7 and Ubuntu are used. After switching on printer works properly, but several hours later its unreachable from both systems. Printer shows connection, I can see it in router web access tool, but it is unreachable. I have to switch off printer, reboot the router, then switch on printer - and it works. Not very comfort.
Does anybody know how to fix this bug?
This question was solved.
View Solution.

Hi @varspb,
Welcome to the HP Forums!
I noticed that your HP Deskjet Ink Advantage 6525 printer is losing wireless connection after some hours with Windows 7 and Ubuntu. I am happy to look into this connection issue for you!
For Linux support, please take a look at this website, http://hplip.sourceforge.net/.
Otherwise, please see the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series - Prin....
Tips for preventing wireless connection issues
The following tips can help prevent wireless connection issues:
Move the printer and the computer or access point (router) closer together.
Remove any metal objects between the printer and the computer or access point (router). Objects such as refrigerators or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals farther away from the printer. Devices such as microwaves and cordless telephones can interfere with wireless transmission.
Consult the router manufacturer for updates and configuration of your router.
Make sure that your computer is not connected through a VPN. You cannot access your printer on your wireless network while connected to a VPN.
Also, please take a look at this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Macbook keeps dropping wireless connection

Hi
this is my first post so be gentle with me LOL
I have had many issues with BT over the last 8 months, mostly due to the speed I had in my area (was 0.45MB when wired at one point), but I recently started to have an issue with the laptops in the house.
I have 2 teenagers and luckily for them we all have Macbooks as I have given them my old ones when I have upgraded I am using a macbook pro (less than a year old & wireless N) and my eldest boy is using a Macbook (about 6 years old with wireless G) you might see where I'm going here....
the problem is the older macbook keeps losing connection on the wireless, I have called and spoken to the 1st line support guys in India but it's a bit of luck if you can understand them let alone find someone who knows what they are doing. As I work in IT I completely understand and normally ask them to read my notes before advising me especially as I had so many issues last year when I was given a number to get through to the priority care team LOL , so far I have tried the following:
moving the Hub 3 to several locations around the house
reinstalling snow leopard
using a wireless dongle
I live in the middle of nowhere so there are no other houses around which have a hub3 sp none can be affecting me and I've checked this by using programs like inSIDDer.
Finally I thought I'd take it to work to see if I could get the model number of the wireless card and order a new one and guess what it works fine!! So I thought I'd check at a friends and again it works fine for the whole time I'm there.
Brought it home and it won't stay connected GRRRAAA!!!!!!!
I've heard that the hub3 doesn't like having a wireless N & and wireless G laptops on the connecting at the same time is this correct? Has anyone else heard of this?
finnally I do have windows machines in the house and none of them (2 laptops and a desktop which is wired) are having an issue but the Sony TV which is wired directly in to the hub will also drop connection randomly between 8 PM and 10 PM every day so I'm leaning towards the hub being a rubbish router instead of the problem lying with my Macbook

There is some help with wireless connection on this page.
Wireless problems and things you can try, to resolve them
There have been other reports of connection issues with Apple products, including Macbooks. A forum search should find the threads relating to this.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Printer keeps dropping wireless connection after working for a while

My computer stops being able to communicate with the printer wirelessly even thought the printer says it is connected to the network and both the printer and computer are on the same network. What happens is I connect the printer to the network and print something from my computer. Then, after a short while, half an hour maybe, when the printer shows it is connected to the network, I try to print but my computer can't find the printer. The message say the printer cannot be found. If I go to the printer, and reconnect with the wireless connection wizard I can print. But after a short time, I won't be able to print again and have to do the wireless connection wizard again. Wireless direct is off. Don't know if that matters.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer Assistant, Printer Home Page (EWS). Also check your Printers Properties.
If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and 8.8.4.4 at the Alternate DNS server.
In the router: (Refer to your router manual for information)
Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
Set router to 20Mhz only, or 145Mbps depending on router.
Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your system now and helps with wireless connectivity (if you want to know why, search the web).
If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same, they must be different for all bands, even for any Guest networks.
SSID broadcast must be enabled.
Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
Power on printer and verify it reconnects to router.
Windows 7/8/8.1 Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wireless connection erratic on Officejet 276DW

Hello, my new Officejet 276DW is a bit hit and miss with the wireless printing. Its only 10m below the router but seems to lose connection after a while. I then have to power off and on ( does this get a fresh IP address?) and it will work again. Also is there any way of waking it from sleep mode apart from pressing the button, i think some one talked about sending it an email, which I tried but HPeprint seems to run at the speed of a glacier.
I did find this answer below, is it what i need??
THANKS
Re: my 8500a goes to seep and i need to power off to allow wire less printing [ New ]
Options
‎10-22-2011 10:49 AM
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.

Let’s try this.
1. Set a static IP in the printer (see step 6) outside the DHCP range of the router (check your manual).
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 5 mins. Power on router wait 3 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings.
Under Home or Work (current profile) \ Network Discovery.
Select "Turn on network discovery" and save changes.
Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Printer drops wireless connection after some time

Have HP Laserjet P1102w printer. (Serial# edited Serial Number by Moderator) (Firmware 20130703)
Windows 7(64bit)
Printer on wireless home network.
For a period of time the printer prints wirelessly and prints from EPRINT EMail address OK.
Normally Wakes itself when print received.
After some period of time,however,the printer quits responding.
It did not wake when print received.Normally wakes itself when print received.
I manually turn it back on (front panel power button) and observe the following:
The blue wireless light is on.
The blue error light is on indicating no error.
the green light also is on.
Open Control Panel(View devices and printers) on computer and it shows printer error.
Can restore normal operation by unplugging for a few seconds and turning back on.
Can also restore normal operation by turning off and back on.
Will quit responding again after some period of time when trying to print.
Tried Windows troubleshooting and HP "Print and Scan Doctor".Tells me to reboot.
How can I fix this problem?
Can't reboot by unplugging or powering off when away from home so can't use ePrint email address to print.
Can't print when away from printer when it quits responding.
Thanks for any help.
This question was solved.
View Solution.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
   This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
   first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
   printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
   Assistant, Printer Home Page (EWS).
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. Assign the printer a static IP address, try using 8.8.8.8 for the Manual DNS server and 8.8.4.4 for the
   Alternate preferred DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Not the average problem with wireless connection. Please help me..

I've been having wireless connection problems ever since I upgraded to Verizon FiOS from Verizon Wireless. Before upgrading to Verizon FiOS in the fall of 2012, my brother's laptop connected just fine with the connection. After upgrading to Verizon FiOS, my brother's laptop could not connect to the internet. It showed the wireless connection signal as Excellent, but I could not access the internet. Either it would be extremely slow or there would be no connection at all. Also, the router would sometimes restart itself randomly, and it was extremely annoying for me since I am hardwired with my desktop.
This was weird because my iPod Touch connected perfectly fine to the wifi. So I thought it must be the laptop. But I brought the laptop over to my cousin's house, who also happens to have Verizon FiOS, and the laptop connected perfectly fine. I called Verizon and none of the technicians knew what the problem was. We tried disabling and enabling the router, changing the channels, and anything that was on the list. They couldn't help me and I was extremely disappointed because not only am I not accessing the internet with my brother's laptop, but I am also paying for the service too. The last technician I called in 2012 decided to send me a new router. I hoped this would work, but it did not. This router, too, would completely reset itself numerous times before settling down and letting me use the internet.
I gave up after that. But in the spring of 2013, I got really fed up with the service I was receiving and I decided to call Verizon again. Again, Verizon tried to help me fix the laptop with their tools and solution guides. But nothing good came out of it, so I decided to ask for a technician to come to my apartment to fix it. We scheduled a day and I was pretty excited since I was almost positive that the connection for the laptop would be fine by then.
I was wrong. The technician came and only stayed for about 20 minutes. He said it must be the laptop or it must be that the walls are too thick in my apartment. But that can't be it since, in my cousin's house, the router is on the second floor and my brother was using his laptop on the first floor. So it couldn't be the laptop nor the house. So we came to no conclusion. He just attached a mini router to the laptop and hardwired it. I wasn't so content but I was glad my brother could finally use the internet now.
About three months pass by and I decide to get myself a new laptop. I get it and I am hoping the wireless connection works. It did, so I was almost positive that it was my brother's laptop that was the problem, not the wireless signal. I go on vacation for a few days and I connect perfectly fine at my friend's house. When I return home and try to connect to my wireless connection, it didn't work!
At this point, I am extremely frustrated. I decided to call Verizon again to replace my router because it was being extremely annoying. It kept resetting itself and I was tired of it. I replaced the router, and this is the router I currently have, but I STILL have the same problem. It resets itself on its own time and I hate it because I'm always in the middle of something. Wow, just wow. There is nothing they could do to help me fix this. I call up a technician, for the millionth time, and he tells me he can't access my router. This occurred with the previous technician who sent me the new router. He tells me his tools are not working and tells me he'll call me back the next day.
It was the next day and I did not receive any phone call. I am extremely disappointed in Verizon FiOS' service and it's customer service. I leave it alone and I just hardwire my laptop to the router. Of course this works, but what's the point of having a laptop when I have to keep it hardwired on my desk? After a day or two, I decide to check if the wireless connection works, and it did. I was surprised. But every now and then, it would shift on and off. Most of the time, the wireless connection is either EXREMELY SLOW or I get none at all, nonetheless, it still says the connection is Excellent.
Please, if there is anyone who could help or try to help me, I would most appreciate it. If there is more information that you need, ask me and I will try my best to provide it to you.

Admittedly, that IS a strange case. Unfortunately, it sounds like all possible troubleshooting has been done by the tech support agents. you mentioned that you were dissatisfied with your other service, did it have a similar problem? theres a possibility of dirty fiber or a bad ONT port, but the random rebooting of the router would almost exclusively be a bad router. question: is the router in the same location as before?

Just started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.

Mail returns to 'main menu'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. HELP!

Mail returns to 'main menu/desktop'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. PLEASE HELP!

- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Can you access the mail account(s) on another device and look for a problem email that may be causing the problem
- You could try deleting account(s) and recreating them

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

HELP! Can't connect on 2 or more wireless connection

I have WRT110 Linksys wireless router. I also have the latest firmware. fw 1.0.04. I have no problems connecting wired connections(2 PCs) and 1 wireless connection. However, when i tried connecting 2 or more wireless connections(3 laptops). All computers gets disconnected. I need to turn off the router again and my computers to get connected but only 2 PCs and 1 wireless laptop... Any help please! I already talked to tech support and no help! We tried to power cycle, reset for 30 secs, remove adapter, cables, etc. and didn't help! Same results! Can't connect on 2 or more wireless connections. We edited the basic wireless setting to WEP/WPA personal, band, channels, still no luck too! Im getting frustrated with this router. PLEASE HELP! I have Time Warner Road Runner cable internet. Thanks in advance!
Message Edited by rhenzhen on 10-02-2008 05:18 AM

Try these settings on Advanced Wireless
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304. and Upload the same firmware on the router once again.

HELP - No Wireless Connection

Similar Messages

Maybe you are looking for