Help on creating custom charts which can show information in context

Hi there.
I'm a long time reader, but first time poster.
I've been using JavaFX for a while now and am working on a project where my goal is to develop an application which:
- is used for presenting last quarters sales results for instance.
- is getting itsdata from a back-end db.
- presents the data as a presentation so each subject is show on one slide, containing a chart and a subjects title.
Now for the communication with the back end there is no problem, used JavaFX long enough to get past that. But I've never worked with the charts
The thing I'm struggling with is my wish to show in-context information on screen based on which bar is clicked on the chart, for instance when the January bar is clicked I want to pop-up a panel which will show the names and photo's of the best selling products of that month.
I have a certain idea of how to do this:
1. getting the chart data from the chart to send to the custom node as parameters
2. creating a custom node which will show different data based on what parameters I give it to him, for instance show("product", "January")
I was hoping that somebody could suggest his/hers ideas on this, or approve/edit my approach. Or maybe share some insights or so.
Thanks in advance!

Hi Inol.
I'm actually working on my solution based on that very useful link. Thanks a lot ....!
Please read carefully what i plan to do.
Basically is to go a little bit further from your proposal: Since my knowlegde of Apex is limited, i just want to know if, based on your idea, the page should not be public, but move the authorization procedure from the onload on requested page to say, an onload procedure on the Login Page, so if the procedure success, redirect (not show login page) to the page requested in the first place, and if it fails, then show login page.
Just want to know if this is possible, before going against the wheel.
Do you think this is possible? This way, Apex app / page can be accessed from both: Apex itself and Forms.
Best regards, and thanks a lot for you unvaluable feedback....!
Regards. Luis ...:)

Similar Messages

Is there any Adobe product that can help me create crochet charts/diagrams?

Is there any Adobe product that can help me create crochet charts/diagrams?

I am not all that familar with Crochet, other than what my sisters and mother use to do 20+ years ago.
What you could do is turn on the background grid and snap to grid. Find a grid size that will work for you (may be easier if you place an image for reference) Then with the pen tool you can create lines that follow the grid (assuming you want to print the grid)
With the image placed you could add text for what color or change the lines color and print it out
Anyway just an idea, it kind of hard to think with out seeing one. But then again if you have book of patterns you could use that as the reference. Just keep in mind that whats in that book is for your own use only, it can not be shared or sold to the public. As the book is protected by copyright laws. Any original work you do that is not in that book, is up to you on what you want to do with it.

Need help in creating custom crosstab reports

Hello
I need some help in creating custom crosstab reports.
My current report shows the number of events that have occured over the time in a day
The events and the eventdetails are read from the database before being printed on the crosstab
i.e something like this.
Note : there are no events between 3:00-3:59,5:00-5:59;6:00-6:59,7:00-7:59 (not present in the database)
hence not displayed in the reports
*08/07/2009*         01:00        02:00         04:00          08:00          10:00*
Event X                    1               1                 4                 1                  3
Event Y                   3               3                 2                 2                  1
Total                        4                4                 6                 3                  4
So far so good...
Now i have to enhance my reporting application to include the event details which have not happened i.e to include the time details in the crosstab reports where no events have happened
08/07/2009             01:00        02:00         03:00          04:00          05:00         6:00         07:00         8:00     9:00     10:00
Event X                     1               1                0                 4                  0             4             0                1            0           3
Event Y                     3               3                0                 2                  0             2             0                2            0           1
Total                         4                4                0                 6                  0             6             0                3            0           4
I have fell short of ideas this time around to implement such a thing
Any help in this direction is deeply appreciated
Regards
Srivatsa
Edited by: Srivatsa HG on Jul 8, 2009 10:56 AM

Hi,
It seems that you are having issue with Crystal Report Design.
Post your question in [Crystal Report Design Forum|SAP Crystal Reports;
That forum is monitored by qualified technicians and you will get a faster response there. Also, all Design queries remain in one place and thus can be easily searched in one place.
Regards,
Shweta

Need help in creating a chart from 3 datasets

Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.

Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate

How to create a structure which can hold a dynamic table as a field in DDIC

Hi ,
       I am designing a solution for a problem and have a unique requirement. I need to create a structure which can hold a field where dynamic table data can be stored. Let me illustrate with an example :
My structure ( say Z_output_struc ) will have the fields
Table_name Table_Data
My function module will have a table type of the above structure, so in effect ,my output can have multiple table names and related to each of them, there will be table data of that table name. The issue is how do I configure this in DDIC ?
I tried creating table_data as "Type ref to Data" but was stuck inside the func module when I tried to transfer data to this.
Any pointers as to how to think about this differently ?
Best Regards,
Girish

Hi Girish,
you start directly from the ref to data. You assign it to a field symbol and cast this to the type of the destination of your select. So you can directly add the reference to the cache:
I hope this example helps a bit (I took a form instead of a function module as it is easier to add here and used an hr table as kna1 is empty on my test system):
REPORT z_rwe_99_dyn_tab_cache.
* type definition
TYPES:
BEGIN OF _s_cache,
    table TYPE        tabname16,
    cache TYPE REF TO data,
END   OF _s_cache,
_t_cache TYPE STANDARD TABLE OF _s_cache.
* data declaration
DATA:
lv_table     TYPE tabname16,
lv_condition TYPE string,
lt_cache     TYPE _t_cache.
* define table and condition
lv_table     = 'HRP1000'.
lv_condition = 'plvar = ''01'' and otype = ''S'' and objid = ''50000016'''.
* get the result of a single table into the cache
PERFORM get_dyn_table USING
                        lv_table
                        lv_condition
                      CHANGING
                        lt_cache.
* form to read a single table
FORM get_dyn_table USING
                     iv_table     TYPE tabname16
                     iv_condition TYPE string
                   CHANGING
                     ct_cache     TYPE _t_cache.
FIELD-SYMBOLS:
    <lt_table> TYPE ANY TABLE.
DATA:
    ls_cache TYPE        _s_cache,
    lr_data TYPE REF TO data.
CREATE DATA lr_data TYPE STANDARD TABLE OF (iv_table).
ASSIGN lr_data->* TO <lt_table>.
SELECT * FROM (iv_table) INTO TABLE <lt_table>
    WHERE
      (iv_condition).
ls_cache-table = lv_table.
ls_cache-cache = lr_data.
APPEND ls_cache TO ct_cache.
ENDFORM.                    "get_dyn_table
If you have more questions just give another post.
Best Regards
Roman

How to create a material which can be used in T-Codes VAO1 & MB1C create

Hello Experts,
How can I create a material which can be used to create a sales order and can be used to create inventory using VAO1 and MB1C T-Codes respectively.
What are the configurations that I need to take care of, while creating it?
I need to create a material which can be used in the whole sales cycle(sales order,goods issue,billing and etc).
Please Help,
Thanks in Advance,
Suma

Hi
Thanks for your fast replies.. I have created a new material and was able to create inventory thru MB1C. But I was not able to generate a goods delivery(VL01N) and billing document(VF01) for the sales order.
Error: No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date chosen.
System Response
The system does not create a delivery item for this order item.
Procedure
Check whether the order item to be delivered contains confirmed schedule lines.
If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
Please suggest,
Tanks,
Suma
Edited by: Suma B on Sep 23, 2008 3:55 PM

Build a blank/other type of page which can show links to other pages

Can someone please tell me how to build a blank/other type of page which can show links to other pages? I mainly want a page to show 3 links, once someone clicks on it, then it will go to a specified page. I tried using URL, but that did not work. Any advice is greatly appreciated. Thank you very much for your help in advance.
-Grace

Do a region (probably a HTML-based one is fine), enter in the HTML for your links, and that should be it. What didn't work about this?
Your links probably should appear like this in your coding (use substitution variables):
f?p=&APP_ID.:3:&APP_SESSION.
In the above example, "&APP_ID." will resolve dynamically to the application ID that you are in, "3" is page 3 (change this to whatever page you want the link to be), and "&APP_SESSION." is the existing session number (if you don't include this, the user will receive a new session ID if the destination page is public or will be intercepted annoyingly to log in and get a new session ID which you probably don't want).
Do not include the full http path. Just start with f?p... and everything is assumed to be relative to Apex on the current environment.
Those are effectively the minimum requirements for a URL in Apex to go from one page to another in an app. You can add to that the additional URL parameters for Request value, Set items with values, clear cache, reset pagination, etc. if you need to. Check the Apex online help under "understanding URL syntax" for details on these.

Hi..someone there?i am looking for an app, which can show and calculate. fully excel data from windows.until now i only found apps, which just show, but not calculate

Hi..someone there?i am looking for an app, which can show and calculate fully excel data from windows.until now i only found apps, which just show, but not calculate.anybody who know an app???

Look at the Rccharles answer on this post.
https://discussions.apple.com/thread/6033082?tstart=0
Also, you can download these free MS Office apps (Word, Excel, PowerPoint) to view (but not create or edit) these files.
https://itunes.apple.com/us/app/microsoft-word-for-ipad/id586447913?mt=8
https://itunes.apple.com/us/app/microsoft-excel-for-ipad/id586683407?mt=8
https://itunes.apple.com/us/app/microsoft-powerpoint-for-ipad/id586449534?mt=8
Microsoft Office for iPad:Early Reviews of Word, PowerPoint & Excel Apps
http://ipadacademy.com/2014/03/microsoft-office-for-ipad-early-reviews-of-the-wo rd-powerpoint-excel-apps
 Cheers, Tom

Table name which can show a list of customersfor an output type

Hi All,
Can you please tell me the table name which can show me the list of customers if a particular output type is mentioned in the selection screen.
Thank you,
Regards,
Shanu.

Hi,
Table B001.
Goto SE16 enter B001
Application : V1 - sales, V3 - Billing
enter output type - BA00 or RD00 and press F8.
Regards,
Chandrasekhar.S
Edited by: chandra sekhar S on Aug 12, 2008 12:28 PM
Edited by: chandra sekhar S on Aug 12, 2008 12:36 PM

Standard report which can show the details of Invoice value and PO value

Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

Hi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C

Create a procedure which requires displaying information from two tables

What if we want to create a procedure which requires displaying information from two tables. In this situation,
I need to display all the details of an employee from an 'emp' table based on the deptno. and also their salary information which is
stored in "Salgrade" Table. Is the use of "And" the correct way of using it?
Do I need to declare all the attributes before begin or I can just access them directly? Thanks
Create Procedure findDept
( I_deptno IN number
) As
Begin
Select Ename, Job, MGR, Hiredate, Sal, Comm, Dept_no from emp and exp, grade , location from salgrade where dept_no
= I_Deptno;
Exception
When NO_Data_Found then
DBMS_Output.Put_Line(' Department not found"|| I_deptno);
End findDept;

Hi,
Besides Qwerty's remark, you've also got a quoting error:
Change
DBMS_Output.Put_Line(' Department not found"|| I_deptno);
{code}
into
{code}
dbms_output.put_line(' Department not found: '|| i_deptno);
{code}
Which leads to the question:
What do you want to do when a record is found?
Display it?

How to create dummy pricture which can be used for chart in msword

I want to create a chart in template,but have problem with creating dummy picture , is there any one could tell me how to create a dummy picture in msword. Thanks

First create a chart.
Now right click on chart > format picture > web
copy the code.
now you may delete it.
insert a picture which you want.
right click > format picture > web
paste the code.
done.

Need help in creating custom reports

hello,
I am using EM 10.2.0.2 on windows 32-bit.
All EM components are installed on a single machine.
Have installed AGENT 10.1.0.5 for managing targets which are on LINUX 2.1
Please help me in getting the solution for the following queries:
(a)I need to create a custom report regarding the CAPACITY MANAGEMENT .
(b)I have some UDM defined but I am not able to use these UDM while creating custom report.
(c)Also is there any possibility that we can use views other than REPOSITORY VIEWS. What I meant was : instead of using REPOSITORY VIEWS can we use the tables of the target instances.
Thanks in advance.

Same post
Need help on repository views for creating custom capacity planning reports

Creating Custom fields which are sales org dependent in Accounts Master

Hello Experts,
I want to create new custom fields in Accounts Master for sales and shipping.The component being used is BP_SALES.However when I try to create custom fields through AET, the new fields are added in the BUILHEADER context node.The problem with this is, its making the fields Sales Org independent.
I want to add the fields which are sales org dependent( i.e. want to add the fields for the context nodes BUILSHIPPINGTERMS and BUILSALESARRANGEMENT).
Please help me in this regards,
Thanks and Regards,
Rahim
Edited by: Abdul Rahim on Dec 27, 2010 9:55 AM

Hi Rahim,
in general extension fields for Business Partner are only supported for the header fields (Table BUT000). Therefore the AET does not offer this.
Table extension for BP sales data is supported by the AET beginning from CRM 7.0 eHP1. If you have this you can just create a 1:1 table enhancements and should be happy. If not I'm afraid that you would have to implement this manually.
Using the Easy Enhancement Workbench (EEW) it would only be possible to create table extensions for the header and for relation ship but not for sales data.
Regards Matthias

Need Help while Creating Customized Cubes

while creating customized cubes i have some problem. please clarify this.
i have 10 Characteristics and 5 KF's.
while creating IC assign the characteristics to the dimension.
is there any proposed rule for assinging the char to dimension or i can assign randomly.
regards
magesh

Hi magesh,
You should assign related characteristics to the same dimension.
Ex: salesregion, sales off and sales rep to the same dimension say " sales".
I.e., when the characteristics have some relationship like <b>one to many</b> you should assign them in the same dimension.
Take an ex of customerid and prodid..they have many to many relationship.In such case go for separate dimensions.
And if the characteristic is of type salesorder which has many distinct entries in fact table, go for line item dimensions.
<b>Note:</b> In line item dimension, you can include only one characteristic.
Hope its helpful
Shylaja.

Help on creating custom charts which can show information in context

Similar Messages

Maybe you are looking for