Help on VMS-communication and prerequisite

HI, we're in the middle of waiting for the Cisco VMS 2.3 and i have a few concerns:
1) VMS has SSH sessions to all the devices being managed. Does these session stay up permanently or only when needed.
2) From what i know VMS comes with Ciscoworks common services and therefore don't need to buy any additional components. Does RME has any additional enhancements if installed together ??
Appreciate all your help. Thanks
LeNnY

hello lenny
the ssh sessions are built up only when needed.its not up always.. for eg, when we force a configuration archive change for a device, a ssh session is formed and the activity is completed..
VMS basically comes with common services, RME, monitoring centers etc.. you dont need to buy anything extra to install RME on ur VMS box.. RME has to be installed on a ciscoworks VMS server with common services. withouth common services, u cant install RME.. its built in inside the VMS software..
hope this helps you... let us know if you have any other queries...
Raj

Similar Messages

Another HP Customer Escalations Team Lack of Communication and Warranty Replacement

I have been dealing with issues on my under warranty laptop for the past six months and have had nothing but problems with HP services. I love my laptop and everyone has been very very nice to me, but nothing is being done. I was supposed to receive a box to ship in my laptop to be diagnosed after two technicians could not fix my overheating, touchscreen, USB, and finger scanner issues. The box was supposed to arrive yesterday because I am leaving the country. I never have time to be without my laptop because I am in full time school however I have a week break during this semester change and this was the only time for me to work this out. I am just at the end of my patience here and so I tried sending an email to the Americas Escalation Management Team with this mesage:
Hello,
I have been in touch with my case manager Catherine regarding my situation over the past couple of weeks. My laptop issues have been going on for over 6 months but I have not been able to send in my laptop to be looked at because I am in full time school. HP has sent out two technicians to try and repair my problems, the first of which I paid for, but nothing has changed. My laptop is still overheating and certain specs such as the touch screen, USB, and finger scanner are still malfunctioning.
Catherine has been absolutely amazing as far as following procedure and helping me as quickly as possible. I do not blame her for any of my problems but I am still in need of help. Her and I had decided to send me a box to ship in my laptop to the repair "factory" and that box was supposed to come yesterday. As I said, I am in full time school but for 6 days I have a break between semester and I am leaving the country during that time. I needed the box to be here yesterday so that I could send it today and then have it returned to me sometime after I returned for the semester. The box is not here and I am leaving in about five hours. I'm not sure where the information relay was confused but at this point I am just very frustrated with HP's service.
My laptop is still under warranty and until this, I have had zero problems and have absolutely loved my laptop. I just feel like my patience is at the end of the line and I do not know where to go at this point. I do not want to give up and lose hope on HP products and customer service because myself and my family have been HP fanatics since I purchased my first laptop, but after talking with those around and other manufacturers, I just feel like I have been dealt the short end of the stick and I do not know how much longer I can hang around.
I do not know where this email is being sent to but please, help me. If it sounds like I am begging, I am. I have no other options at this point and as pathetic as it sounds, my laptop is my life because it is the center of almost every single class I am enrolled in. I won't beat around the bush so to be frank, I believe I deserve a new laptop after everything that I have been put through. Doing so would be an incredible act of kindness and I only hope that this can be done.
Last thing, this email is in no way meant to talk poorly about my case manager Catherine or anything she has done for me. She has been amazing and very helpful. All I ask is that someone can help me.
Thank you for you time,
... The emails my case manager has sent me had this email address for me to respond to, [Personal Information Removed] but immediately I receive an email saying that this email address is invalid. I am normally a very patient person but this is pushing me over the edge and I just need help. Clear communication and help is all I ask for.
Hopefully this forum will push my progress a little bit, but I won't even know because I'm leaving the country in 5 hours! Well HP, please help me.

williamsBank17:
Yaeh right they fixed it. I have a bridge in Brooken New York I will sell you to. You need to cut it off at HP's tech level and contact HP's excutive office and ask to speak with their boss. He will then give you the direct contacts to Chad's office. HP monitor will not allow me to post any of their HP contacts here in the forun. I am sure they will not like it for writing his name Because HP's forum monitors do HP's do not like me posting HP's top CO's dirrect contact information. When I do they will e-mail me and whipe out the information. The real people to contact and not some India HP tech who speaks very poor English. Chad is Catherine's over all boss. You can even ask her that you would like to speak to her boss. If she puts to her supper visor ask their supper visor to put their boss on the phone keep going up the chain untill you have reached Chad's office. He his the top CO for lap top repair center. Then you know your lap top will be fixed or replace. Do not for get to tell him you can cook an egg on your lap top.
You are welcome,
frrw

Hi to everybody, I'm new of the community and I'd like to know if anybody could help me with this issue. I have differente itunes libraries stored in differente hard disks, and I' d like to merge them all in one unique library

Hi, I' m new of the community and I hope I'm not asking something that has been already discussed. I have different iTunes libraries on different hard disks and I would like to merge them in an unique library - mantaining all the metadata - so that I can use this new one with iTunes Match. Could anybody help me?

PowerTunes - http://www.fatcatsoftware.com/powertunes/ (commercial software)
syncOtunes - http://homepage.mac.com/oligrob/syncOtunes/syncOtunes.html
Alison 1231, your question is not identical to the original poster's so perhaps you could start a new topic with the question since the answers will be different and not apply to the OP's post.

How to get quick and efficient help in the Community

We have provided the Community so that our users can post questions and answers to assist one another, and to allow users to read and learn from questions posted by other users.
To further assist with the collaboration, our community has Kudos and Solution buttons on each post, to reward great posts and answers which resolve a question.
We encourage all of our users to give Kudos to good answers they find on the community and for posters to click the Solution button on any answer which resolves their question.
Here are some tips you can use when getting started in the community. We would suggest looking in two places before you post a question.
First, look at our knowledge base. We have provided answers to many of the commonly asked questions here,
If your question is not answered in the knowledge base, please use our built-in search functionality to see if anyone has posted a similar question and been answered.
For Google Chrome specific issues, you may want to search the Google Chrome Support page.
Finally, if you are unable to resolve your question with the knowledge base or the search feature, you may want to post your own question. Following the below steps will allow everyone in the community to have a large amount of knowledge about your system and your question.
Be sure that you include what product model you have.
Include the operating system that you have on your product.
If you have upgraded or changed the operating system, include that information.
Clearly and specifically discuss the problem that you are having, including how to reproduce it.
If there are error messages, include them as they appear on the screen.
Applications you are having difficulty with should be listed. If you have the version number that is helpful.
Be patient while you wait for an answer. This community is about users assisting users.

Hello Bcorfman
This page:
http://community.acer.com/t5/Discussion-Forums/ct-p/boards
Shows you all the boards in the forum. Simply choose the appropriate board. For example, if you have a problem with your laptop, you would choose Notebooks & Netbooks. Then click the "New message" tab at the top left and you can start your own thread.

Help! Office 365 and Windows Server 2012 R2 (Essentials) no longer communicating

Hi - I have had this problem beginning November. From what I can tell, it started after I applied a Windows Update patch of the latest Microsoft Online Services Sign-in Assistant. Now when I go in to the Windows Essential Dashboard, where I have
my domain linked with Office 365 for business, the "Microsoft Online Account" area shows as "unknown". I have tried removing and re-adding the assistant but to no avail. I have read some clue that the version should be 7.250.4259.0
but I am unable to find the download locally or online.
Additionally, the area of Office 365 does not show my Org, Domain, Subscription or exchange online information. However, when I click "Link a Domain" it is recognizing that I have already done so. Again, everything worked great until
this blasted update.
We are a school and I need to be very careful not to break/disconnect the Drive Shares of the "Cloud" component as that's how students access their files.
I did see this link from NEO YU but am a bit nervous as my knowledge of AZURE is near null.
http://technet.microsoft.com/en-us/library/jj151815.aspx#bkmk_installmodule
Please help get me reconnected and thanks to all for ALL you do!

you may need follow that documation...start a PowerShell as administrator and type the cmdlet
Import-Module MsOnline. After successfully importing the module, continue with
Connect-MsolService. You will be asked for credentials. Type a global administrator of Office 365.
this...
https://mshiyas.wordpress.com/howto-adfs-adfs-proxy-on-windows-server-2012-r2-with-office-365/
Best,
Howtodo

I'm ready to help the FOSS community , but I can't find a proyect.

I've been working as a C# developer for the last 5 years and using linux for about the same time. One of my goals for the 2011 is to start developing FOSS in my spare time. Maybe in python, I find it interesting.
However , there are some problems that I am facing:
1) The proyect: every proyect I found is too big , or too complex , or too boring. Maybe I'm missing something , maybe I'm looking in the wrong place. I don't know , Exaile was the closest to a interesting proyect that I found , but after reviewing the code , I couldn't understand the gstreamer logic (I mean , that's the core of the app , right?).
2) My "coworkers": I'm used to work everyday in the same office and and have a close relationship with them. I don't know how to react to this change and how does the other developers could/would react to a new developer coming to the proyect (I mean , "hey guys , i fixed these bugs and added the 2 things for the next milestone. Btw , I'm Andres" seems wierd lol).
I think I'm not the first one having these problems , so any feedback would help me.
Thanks

nagel wrote:I'm ready to help the FOSS community, but I can't find a project.
How exciting! I love helping FOSS projects, but it can be difficult to decide what to do.
nagel wrote:One of my goals for the 2011 is to start developing FOSS in my spare time. Maybe in Python, I find it interesting.
I agree, Python is very interesting. I made my first Python application a few months ago. It was easy to use, fun, and I think using Python helped me to become a better C programmer.
Keep it simple
nagel wrote:Every project I found is too big, or too complex, or too boring. Maybe I'm missing something, maybe I'm looking in the wrong place.
My suggestion: choose a project where you need to learn one thing at a time.
There are languages (examples: Python, C), libraries (examples: GTK, Qt), and programming paradigms. (examples: GUI programming, threaded programming) When you begin working on a project, you will probably need to learn something new. Try to learn only one thing at a time. For example, if you have to learn gstreamer and GTK (two libraries) at the same time then you might become frustrated. Or, if you have to C++ and Qt (a language and a library) at the same time then you might become frustrated.
So, try to learn one thing at a time.
Other FOSS developers
nagel wrote:I'm used to work everyday in the same office and and have a close relationship with them. I don't know how to react to this change and how does the other developers could / would react to a new developer coming to the project.
I love working online with FOSS developers! It feels like I'm talking to a celebrity. You know, like when Allan or Dusty posts a reply to me on the Arch Linux forums.
Of course, you should join the mailing list and bug tracker for the project you want to work on. I don't usually introduce myself. Instead, I just start helping, and people will know me soon.
My FOSS experience
Here are some examples from my FOSS experience.
Many years ago, I wanted to write a new FOSS application. I couldn't think of any new applications to make, so I decided to make a video game. There are NEVER too many video games.
I learned many things by making video games:
Languages: C, Objective-C, Java, Assembly, Ada
Libraries: Allegro, SDL, Java SWING
I've submitted many bug reports to many different projects, such as wxWidgets, Allegro, Udiskie, and Haiku. I really like submitting bug reports and working with the developers to fix the problem. It's easy to do and I get to use better software.
I maintain some AUR packages. (very easy, but it helps FOSS)
I helped write the documentation for some software from the Arch Linux community, such as Packer and Udiskie. I've contributed to the Arch Linux wiki.
Recently, my wife and I wanted a new application for budgetting. I decided to write one. I used Python and wxWidgets. It works pretty well. My next goal is to convert it to C++ and wxWidgets, and then make a version for Haiku using C++ and the Haiku API.
Interesting things
You should definiteley work on something that you think is interesting. To me, that's Arch Linux, Haiku, bug reports, and documentation. Try to find things that are interesting to you!
Lastly, don't make your goal too big and don't try to do too much. There are many many people helping in FOSS. If everyone does a little bit, then we can make something great.

Help understand Visual Communicator Live Streaming

Up to know I run live streaming through our Steaming server using FMS and Flash Media Live Encoder as we only needed one camera for live video feeds.
We are looking at the ability now to use 2 live cameras and also the ability to snap in pre recorded video during live feeds and also provide lower third titles.
I am looking at:
Adobe Visual Communicator 3
Wirecast 4
CutFour
All of these provide the possible live switching I need.
I'm at the moment looking at the Trial version of Visual communicator and I am struggling getting my head around a few things.
I can hook up 2 -3 Sony A1 HD cameras in SD no problem and running it though FMS is fine. During test streams clicking on the cameras using the mini switcher is straight forward.
howevr I am struggling to work out how to do the following:
Add prerecorded video clips to Camera 3? ( in the Setup Tab it says " No Camera found - please connect a camera or replace with Photo or video Clip) How do I replace with a Video Clip?
How do I add premade titles, so that during the live feed I can put lower third titles in?
Finally, How do Provide an intro looping video to play before the live feed starts?
Any instructions would be appreciated

Hi there
The forums are user-to-user. The older incarnation of the forums used to have a disclaimer on each page. Now there is one that appears at:
http://forums.adobe.com/index.jspa
If you want to bring something to Adobe's attention, you need to use the proper channel. That channel is the Wish Form/Bug Reporting form.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help with Disk Utility and disk repair

I just ran disk utility to verify my hard drive and the report says this:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
The volume The volume sh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
After saying that HFS volume needs repair, it won't let me repair the disk. That button is grayed out in disk utility. If I boot the computer from my OSX install cd and repair it that way, will it erase all of my data on my hard drive? Any ideas?
20" iMac 2.0 GHz Intel Core Duo Mac OS X (10.4.9) 60 GB iPod Video

To repair a startup volume you must boot from your OS X Installer Disc:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Pls help me with Mac and had a trial serial number problems

Hi,
I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
What can I do? any idea?
to uninstall the photoshop and install again?
but if I have the other programs working and installed?

Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
Date: Sat, 1 Aug 2009 11:53:58 -0600
From: [email protected]
To: [email protected]
Subject: Pls help me with Mac and had a trial serial number problems
Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Good luck!
>

Help! Restored OSX and software, now have problems.

I just restored OSX and my software because I was having issues w/ my appleworks crashing. Now, after I have restored it, there are certain applications that 'will not work'. Like, if I try to open Safari, or Itunes on my dashboard, they just 'bounce' but nothing opens or happens. Mostly everything else works. It might have something to do w/ this 'previous system' folder the computer created when I restored. Anyone know why programs such as Safari and Itunes won't open/work now?

More than likely you had a corrupted hard drive before you Archived and Installed, but you didn't repair the hard drive before doing the Archive and Install. Hence, you now have a newly corrupted system installed.
At this point you can try the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.5.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
If this doesn't resolve your problem, then I suggest you backup your personal data files, reformat the hard drive, and reinstall OS X.
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
After formatting has completed quit DU and return to the installer. Now proceed to install OS X.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

PLEASE HELP - Fujitsu Lifebook 6120D and Bluetooth...

Fujitsu uses software called Plug Free and this is only compatible with Fujitsu products - NOT Nokia phones. Seems ridiculous, but according to the Fujitsu support line, Bluetooth was not so common in 2004 when I purchased my laptop. They won't help me at all - and telling me that the latest FJ laptops are Nokia compatible is no use and seriously annoying!
In control panel, Nokia Connection Manager - there are no detected devices.when I search I get message 'Cannot use the connection type. Check that all the needed hardware, software and drivers are available.'
The FJ Plug Free software can make the connection -but only allows the following services:
OBEX File transfer,
Dial Up networking,
Serial,
OBEX push.
Under other services is the Nokia PC Suite which I can select, click 'add service and connect' but then - nothing happens and I am still not connected. In PC Suite it still states there are no devices found.
Apologies that this is garbled - but its late and I am rather tired and fed up with it.

I also wasn't able to connect my Lifebook 6120 via the plugfree software when I got my new Nokia phone and the required new version of the PC suite
The problem is, PC Suite only supports the Microsoft bluetooth stack and not the Plugfree software any more. But the Microsoft stack is not installed for the built-in-bluetooth-device on the lifebook (by ALPS in my Lifebook).
The good news is: the Microsoft stack is able to handle built-in-bluetooth if you just know how to make it work.
Prerequisites: Windows XP SP2 (or later).
What to do:
1. Open the device manager and write down the device id for your bluetooth-device. For me it was: USB\Vid_044e&Pid_3001&Rev_0336&MI_00
2. Open the file WINDOWS\INF\BTH.INF with notepad.
3. Move to the section ";------------- Device section - Start -----------------------"
4. In the section "[ALPS.NT.5.1]" insert an additional line:
Lifebook (Alps) Bluetooth USB Adapter= BthUsb, USB\Vid_044e&Pid_3001&Rev_0336&MI_00
This tells Windows to use the driver "BthUsb" (Bluetooth USB) for the device with the ID at the end. Make sure that ID fits the ID you found out in step 1
5. Save the file.
6. Go to the device manager. Maybe it's best to remove the old driver first, but it might also work if you don't do that. Start a search for new devices or drivers for your bluetooth device. I suggest you then choose manual selection of the driver. The old one and your new one should show up.Choose the new one!
7. That's it! Maybe you need to reboot. A bluetooth icon should show up in the task bar on the right which gives you access to bluetooth. There you can connect with your mobile and PC suite should be able to connect!
This is a rough outline I wrote down after I figured out how to do it. Some steps might require minor changes, and my windows is even to German edition, so the name of the Windows programs might be called slightly different on your OS.
I hope this is helpful for anyone who already wanted to give up (as I was about to do) after extensive internet searches that probably were not helpful.
Dirk

C3-00 community and mail applications problems

hi,
i can't use community and mail app with GPRS. always "comunication error, try again later".
With my Wlan at home, or with operamini no problems at all.
i've tried several times to reboot the phone, remove battery for a while, but nothing helps!
thanks for any help!
L.

sorry have a german menu..
go to
Menü -> Einstellung -> Verbindungen -> Paketdaten -> Paketateneinstellungen ->
here add the settings you get from your provider..
worked for me :-)
another question can you view videos on m.youtube.com ????

Help I bought iPhone and updated it asks Apple ID and I do not remember him help

help I bought iPhone and updated it asks Apple ID and I do not remember him help

Welcome to the Apple community.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

Need help with hearing Skype and Steam chats at th...

When im using skype and using steam (a gaming app) i cant hear my skype friends through my headphones and i need help
Subject/title expanded from "Help."

Hi, Natasharocks11, and welcome to the Community,
I could not detect from your post precisely what the problem with your account is. Please kindly post back with details as well as any error messages you may be seeing.
Thank you,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Help on VMS-communication and prerequisite

Similar Messages

Maybe you are looking for