Help Regarding the Reports in BI

Hi Everyone ,
I have a question from BI Answers.
So in 11g we can find all the recently viewed reports in the Most Recently viewed tabs in Home page ri8.
We have a report with a Report Prompt on date and also we have this same Report on the dashboard .This Dashboard also contains a Dashboard prompt on date .
We have a requirement .
When the user opens the report from recently viewed tab .He need to get the date from the particular Report date prompt But When the user tries to open the report from Dashboard ,the dashboard date should pass to the report and the date which is in the report should be negated .
Ex: Dashboard prompt has a date with june 13th and report has a date with may31. when the user tries to open the report from Recently viewed tab he need to see the data with MAY 31 and when he tries to open the same report from the dashboard then the JUNE 13th should pass to the Report and the report date MAY 31 should be negated .
IS this possible with creating the repository variables and session variables for the dates .
Any help is very Appreciated
Thanks
Sam

Hi Sunny
You can acheive something like your requirement by using a presentation variable and its default value.
In your dashboard prompt, have it set a presentation variable called, say, v_date
In your report put a filter on the date column and set it to "is equal to / is in". Click "Add More Options" and choose "Presentation Variable". In variable expr put: v_date and in the default type your report date in the correct format.
Paul

Similar Messages

Regarding the report for vendor stock

Hello all,
This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
However the customer would like to have a report in which we can see the stock provided to vendor ' Vendorwise or PO wise" .
Kindly suggest the solution.
Thanks & regards,
Sudhir

Hi
The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
If you want to see the total stocks available at vendor then use report MBLB

Required Help Regarding a report in HR for Human Resource analysis - MIS

Hi Friends,
i have a requirement for MIS report for Human Resource Analysis Report which have to display Head Counts Vs Cost for the employees at Employee Subrgroup and Grade wise....
Kindly suggest me how can go ahead with this...
for the example.... i am posting the format how the report will look like
Human Resource Analysis
Head Counts vs. HR Cost FTM
count cost
Top Management
GM
CGM
Vp
Total
like this for employee subgroupwise the costs and headcounts should display.
Regards,
SreeHari

I attached smartform in NACE to LQCB output type but i should also make changes in report program RQCAAP01..can u please let me know what customizations i should do in tht report program to attach the smartform..

Need help regarding the dunning form

Hi,
I have to display all the sales and payments of a cusomter for all the periods that are older than the run date in a dunning form. (i.e) if the run date is 04-aug-05 and if the slaes are there in 3 months(april, May, july) then i have to display three line items with sales and payments for that corresponding three months in the line items. As this is a dunning form i cannot change the print program. any table which have all the sales for a period which i can access directly in the script. can anyone suggest how to handle this.
regards,
Asha

Hi,
You can call a subroutine within a program (your z program)
/:   PERFORM ADD_AMOUNT IN PROGRAM SAPLZFTP_F150
/:           USING &W_AMOUNT&
/:   ENDPERFORM
In the z program create this subroutine.
      Form ADD_AMOUNT
     -->FT_INVAR Text Symbol table for input variables
     -->FT_OUTVAR Text Symbol table for output variables
FORM add_amount TABLES ft_invar   STRUCTURE itcsy
                       ft_outvar STRUCTURE itcsy.
STATICS:
    w_value_l    TYPE f150d-salfw.
        READ TABLE ft_invar INDEX 1.
        IF sy-subrc IS INITIAL.
you can check all this part of the code how you want to
process your data whether its numeric or character or
whatever
           w_value_l = w_value_l + ft_invar-value.
        ENDIF. "IF sy-subrc IS INITIAL.
ENDFORM.                    " ADD_AMOUNT
TO BESPOKE THE PRINT PROGRAM FOR THE DUNNING
Dunning outputs use the function module FI_DUNNING_PRINT_NOTICE. You can copy this to a Z function module and make some changes to the data selection. You will have to look into the code and decide what changes you need.
The process to use a bespoke program to do the dunning print is as follows:
UNDER FI GLOBAL SETTINGS in the configuration,
There are Business Transaction Events. Within that you can configure the same to enable a Z function module in place of the standard function module (from the FUNCTION GROUP F150)
Create function group ZFTP_F150
Copy standard function module FI_PRINT_DUNNING_NOTICE of function group F150 to ZFTP_FI_PRINT_DUNNING_NOTICE in function group ZFTP_F150
Copy standard function module PRINT_DUNNING_NOTICE of function group F150 to ZFTP_PRINT_DUNNING_NOTICE in function group ZFTP_F150
Within the function module ZFTP_FI_PRINT_DUNNING_NOTICE, change function module call for PRINT_DUNNING_NOTICE to ZFTP_PRINT_DUNNING_NOTICE
Create a new include ZFTPI_ROUTINES within the function group and copy the subroutines LOG_MSG, LOG_MSG_TAB, & LOG_SYMSG from the function group F150 to this include
AS AN ALTERNATE, YOU CAN COPY THE WHOLE FUNCTION GROUP
Maintenance view TBE31 (SM30). Change the function module from FI_PRINT_DUNNING_NOTICE to ZFTP_FI_PRINT_DUNNING_NOTICE against the event 00001720 FI-FI entry
Hope this helps.
regards,
Satya

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

Regarding the Report's Default Value

Now the default value of the CrystalDecisions.CrystalReports.Engine is empty which is a problem clarified by both Luke and Don Williams. Don provided a good tips for code, referring Don's reply at Jan 10, 2014 and Jul 31, 2012, I’ve tested this and it is worked, and I got a default value. However, the other sever problem has been occurred. Since the unmanaged code (COM) can't construct (casting) to the managed code directly, since it is a interface. Otherwise the original all Crystal Document objects will be wiped out, and become null value. Here is my analysis referred Don’s code:
foreach (CrystalDecisions.ReportAppServer.DataDefModel.ParameterField rasParamfield in                                                             myReport.ReportClientDocument.DataDefController.DataDefinition.ParameterFields)
Here myReport is coming from CrystalDecisions.CrystalReports.Engine.ReportDocument, so this code will not be useful if you want to keep myReport active. From this point, I do not know what another alternatives could be used to achieve this or using Reflection , and how?
Any responses would be so appreciated.
J. Huang

Hi Johnson,
Correct, but mostly it works without having to set the viewer to the RAS Report Object but just in case you do then I use a flag id RAS has modified the report and set the viewer accordingly:
You still need to open the report by the Engine but then assign it to the RAS client Doc:
add these assemblies:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using CrystalDecisions.ReportAppServer;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.ReportAppServer.CommonControls;
using CrystalDecisions.ReportAppServer.CommLayer;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.ObjectFactory;
using CrystalDecisions.ReportAppServer.Prompting;
using CrystalDecisions.ReportAppServer.DataSetConversion;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportSource;
Global flag:
bool IsRpt = true;
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
In the routine to you update the values add IsRpt = false;
In your open method use this:
rptClientDoc = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
rpt.Load(rptName.ToString(), OpenReportMethod.OpenReportByTempCopy);
rptClientDoc = rpt.ReportClientDocument;
Then in the view report button use this:
try
    if (!IsRpt)
        crystalReportViewer1.ReportSource = rptClientDoc.ReportSource;
    else
        crystalReportViewer1.ReportSource = rpt;
catch (Exception ex)
    btnSQLStatement.Text = "ERROR: " + ex.Message;
Don

Need help in the Report Program!!!

Hi,
This is SAI KUMAR.
Selection Screen
Sales Org: VKORG
Distribution Channel: VTWEG
Division: SPART
Billing Type: FKART
Plant: WERKS
Payment Terms: ZTERM
Sold-to Party: KUNAG
Billing Date: FKDAT
Now Using the above Selection screen inputs, I want to generate the following fields in the output.
Output Screen
Invoice No: VBELN
Invoice Date: FKDAT
Customer Number: KUNNR
Customer Name: NAME1
Material Description: MAKTX
Payment Terms: ZTERM
Net Value: NETWR
Ship-to City: ORT01
Sold-to party: KUNAG
Ship-to party: KUNNR
Tables Used: 
Delivery: LIKP, LIPS
Invoice:VBRK, VBRP
Customer: KNA1
Material: MARA
Material Description: MAKT

Now the Problem what I got is....How to link between these tables...ie., what common fields can be used between these tables so that I can use FOR ALL ENTRIES and retrieve the above output fields.
Can anyone please help me out in giving a REPORT program or a pseudo code for the above data.
Thanks & Regards,
SAI KUMAR
ID: [email protected]

See the below code :
REPORT zjpvrom323 NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 35
MESSAGE-ID zjpv001 .
*& Development ID: OM_DD_323_LJP *
*& Report : ZJPVROM323 *
*& This application is used to Develop a new billing document that *
*& fulfills the NPKK Requirement That does not exist in JSP *
*& functionality.according to the delivery date it displays Monthly *
sales notes report *
*& Change Log: *
*& Init. Who Date Text *
*& MALIKDH1 Seshu Reddy 2003/07/20 Initial Development *
 Constants
CONSTANTS :c_vkorg(4) VALUE 'JP20', " Sale Organization
 c_vtweg(2) VALUE 'TR', " Distribution Channel
 c_rfbsk VALUE 'C', " Status for transfer to accounting
 c_spart(2) VALUE '01', " Division
 c_kvgr2(3) VALUE 'Z51', " Customer Group 2
 c_fkart(4) TYPE c VALUE 'ZJPW', " Billing Type
 c_waerk(5) TYPE c VALUE 'JPY', " SD document currency
 c_kschl(4) TYPE c VALUE 'ZJPC', " Condition type
 c_no_of_lines TYPE i VALUE '35',
 C_CONS_5(1) TYPE C VALUE '5',
 C_CONS_8(1) TYPE C VALUE '8',
 C_CONS_10(2) TYPE C VALUE '10',
 c_konwa(5) TYPE c VALUE 'JPY'. " Rate unit (currency or
" percentage)
 DB-Tables *
*TABLES : vbrk, " Billing : Header Data
 vbrp, " Billing : Item Data
 kna1, " Customer master : General data
 knvv, " Customer master : sales data
 likp, " Delivery : Header data
 konv, " Condition : Transaction data
 konp, " Condition : items
 zjpv_torihiki, " Add on table:Business transaction category
 zjpv_rebate. " Add on table : rebate table
 Variables/Internal table *
DATA :g_date(2) TYPE n, " Date
 g_month(2) TYPE n, " Month
 g_year(4) TYPE n , " Year
 g_bill_low(10) TYPE n, " From date
 g_bill_high(10) TYPE n, " To date
 g_month1(2) TYPE n, " Month
 g_year1(4) TYPE n, " Year
 g_date1(2) TYPE n, " Date
 g_year2(4) TYPE n, " Year
 g_datum LIKE sy-datum, " System date
 g_skip(4) TYPE c , " Line break
 g_ctax(8) TYPE c, " Consumption tax
 g_ctax1(10) TYPE c, " Consumption tax
 g_ctax2(16) TYPE c, " Consumption tax
 g_vol(6) TYPE c, " Volume
 g_vol1(6) TYPE c, " Volume
 g_vol2(7) TYPE c, " Volume
 g_tamt(10) TYPE c, " Total amount
 g_tamt1(13) TYPE c, " Total amount
 g_tamt2(16) TYPE c, " Total amount
 g_gtotal(10) TYPE c, " Net total
 g_gtotal1(13) TYPE c, " Net total
 g_gtotal2(16) TYPE c, " Net total
 g_uprice(8) TYPE c, " Unit Price
 g_uprice1(10) TYPE c, " Unit Price
 g_uprice2(11) TYPE c, " Unit Price
 g_amount(10) TYPE c, " Amount
 g_amount1(13) TYPE c, " Amount
 g_amount2(14) TYPE c, " Amount
 g_fctax(16) TYPE c, " Consumption Tax (Total)
 g_ftamnt(16) TYPE c, " Total amount (Total)
 g_ftotal(16) TYPE c, " net total (Total)
 g_fctax1(8) TYPE c, " Totals with Comma (Consumption tax)
 g_fctax2(10) TYPE c, " Totals with Comma (Consumption tax)
 g_fctax3(11) TYPE c, " Totals with Comma (Consumption tax)
 g_ftamt1(10) TYPE c, " Totals with comma (Total amount)
 g_grand_total(16),
 g_grand_total1(14),
 g_net_total(16),
 g_net_total1(14),
 g_middle_val(16),
 g_middle_val1(11),
 g_ftamt2(13) TYPE c, " Totals with Comma(Total amount)
 g_ftamt3(14) TYPE c, " Totals with comma(Total amount)
 g_ftotal1(10) TYPE c, " Totals with comma(Net total)
 g_ftotal2(13) TYPE c, " Totals with comma(Net total)
 g_ftotal3(14) TYPE c. " Totals with comma(Net total)
*Internal table for billing document header
DATA : BEGIN OF t_vbrk OCCURS 0,
 vbeln LIKE vbrk-vbeln, " Billing Doc number
 vbtyp LIKE vbrk-vbtyp, " Document Category
 kunag LIKE vbrk-kunag, " sold-to-party
 vkorg LIKE vbrk-vkorg, " sales organization
 vtweg LIKE vbrk-vtweg, " Distribution Channel
 kunrg LIKE vbrk-kunrg, " Payer
 fkart_rl LIKE vbrk-fkart_rl," Billing Type
 fkdat LIKE vbrk-fkdat, " Billing date
 mwsbk LIKE vbrk-mwsbk, " Tax amount in document currency
 netwr LIKE vbrk-netwr, " Net value in document currency
 waerk LIKE vbrk-waerk, " SD document currency
 knumv LIKE vbrk-knumv, " Number of the document condition
 END OF t_vbrk.
internal table for Output formatting
DATA : BEGIN OF t_oput OCCURS 0,
 rbcode(4) TYPE c, " Regulating Branch Code
 tpcode(10) TYPE c, " trading partner code
 bdgrp(3) TYPE c, " Billing Document Group
 zjd_torihikikubn(3) TYPE c, " business transaction
 "category
 tpname1(35) TYPE c, " trading partner name 1
 tpname2(35) TYPE c, " trading partner name 2
 bdgnm(10) TYPE c, " Billing Doc Group Name
 dcode(10) TYPE c, " destination code
 dname(35), " destination name
 fkdat(10) TYPE c, " Date of Issue
 vbeln(10) TYPE c, " Billing Doc No
 zzjp_remarks(30) TYPE c, " Remarks
 ctax(16) TYPE c, " Consumption Tax
 tamnt(16) TYPE c, " Total Amount
 gtotal(16) TYPE c, " Grand total,
 pcode(9) TYPE n, " Product Code
 pname(40) TYPE c, " Product name
 volume(16) TYPE p decimals 3, " volume
 volume1 type i,
 volume2(16) type c,
 uprice(13) TYPE c, " Unit Price
 amount(16) TYPE c, " Amount
 posnr(6) TYPE n, " Billing Item
 END OF t_oput.
*Internal table for Customer Master Sales Data
DATA : BEGIN OF t_knvv OCCURS 0,
 kunnr LIKE knvv-kunnr, " Customer Number
 vkorg LIKE knvv-vkorg, " Sales Organization
 vtweg LIKE knvv-vtweg, " Distribution Channel
 spart LIKE knvv-spart, " Division
 kvgr2 LIKE knvv-kvgr2, " Customer Group 2
 vkbur LIKE knvv-vkbur, " sales office
 END OF t_knvv.
*Internal table for Customer Master Data
DATA : BEGIN OF t_kna1 OCCURS 0,
 kunnr LIKE kna1-kunnr, " Customer number
 name1 LIKE kna1-name1, " Customer Name 1
 name2 LIKE kna1-name2, " Customer Name 2
 END OF t_kna1.
Internal table used for billing document items
DATA : BEGIN OF t_vbrp OCCURS 0,
 vbeln LIKE vbrp-vbeln, " Billing Document
 posnr LIKE vbrp-posnr, " Billing item
 zjd_torihikikubn LIKE vbrp-zjd_torihikikubn, " Business
 " Transaction Category
 vgbel LIKE vbrp-vgbel, " Document number of the
 " reference document
 vgtyp LIKE vbrp-vgtyp, " Document category of
 " preceding SD document
 zzjp_remarks LIKE vbrp-zzjp_remarks, " Remarks
 zjd_kanamei LIKE vbrp-zjd_kanamei,
 fkimg LIKE vbrp-fkimg, " Actual billed quantity
 netwr LIKE vbrp-netwr, " Net value of the
 " billing item in document currency
 zjd_touitsumatnr LIKE vbrp-zjd_touitsumatnr,
 END OF t_vbrp.
Internal table used for Rebate Table
DATA : BEGIN OF t_zjpv_rebate OCCURS 0,
 fkart LIKE zjpv_rebate-fkart, " Billing type
 rebate_code LIKE zjpv_rebate-rebate_code, " Rebate Code
 rebate_name LIKE zjpv_rebate-rebate_name, " Rebate Name
 END OF t_zjpv_rebate.
*Internal table used for Delivery Header
DATA : BEGIN OF t_likp OCCURS 0,
 vbeln LIKE likp-vbeln, " Delivery No
 kunnr LIKE likp-kunnr, " Ship-to party
 END OF t_likp.
*Internal table for conditions (Transaction Data)
DATA : BEGIN OF t_konv OCCURS 0,
 knumv LIKE konv-knumv, " Number of the document condition
 kposn LIKE konv-kposn, " Condition item number
 kschl LIKE konv-kschl, " Condition type
 knumh LIKE konv-knumh, " Condition type
 END OF t_konv.
Internal table for conditions (Item)
DATA : BEGIN OF t_konp OCCURS 0,
 knumh LIKE konp-knumh, " Number of the document condition
 kbetr LIKE konp-kbetr, " Rate (condition amount or
 " percentage) where no scale exists
 konwa LIKE konp-konwa, " Rate unit (currency or percentage)
 END OF t_konp.
Internal table for table Torihiki Kubun
DATA : BEGIN OF t_zjpv_torihiki OCCURS 0,
 kubun LIKE zjpv_torihiki-kubun, " Condition type
 rep_grp LIKE zjpv_torihiki-rep_grp, " Shikiri Report Group
 rep_grp_name LIKE zjpv_torihiki-rep_grp_name, " Shikiri Report
 " Group NAME
 END OF t_zjpv_torihiki.
DATA: l_tpname1(35) TYPE c, " trading partner name 1
 l_tpname2(35) TYPE c, " trading partner name 2
 l_bdgnm(10) TYPE c, " Billing Doc Group Name
 G_FLG(1) type c,
 G_FLG1(1) type c.
 Selection screen *
SELECTION-SCREEN : BEGIN OF BLOCK zjpv WITH FRAME TITLE text-001.
PARAMETER : p_date LIKE sy-datum OBLIGATORY. " Delivery date
SELECTION-SCREEN : END OF BLOCK zjpv.
RANGES : r_bdate FOR vbrk-fkdat. " Billing date
 Initialization *
INITIALIZATION.
p_date = sy-datum.
 MAIN PROCESSING *
START-OF-SELECTION.
This Perform is used for getting Billing date According to Delivery
Date(Output date)
PERFORM f_bill_date_move.
Selecting the data from tables VBRK,VBRP,KNVV,KNA1,KONV,KONP,LIKP,
ZJPV_TORIHIKI and ZJPV_REBATE
PERFORM f_get_data.
Passing the data from the internal tables (T_VBRK,T_VBRP,T_KNVV,
T_KNA1,T_KONV,T_KONP,T_LIKP, T_ZJPV_TORIHIKI and T_ZJPV_REBATE)
to out put Internal table(T_OPUT)
PERFORM f_process_data.
 END OF SELECTION *
END-OF-SELECTION.
Out put formatting
PERFORM f_output_data.
*& Form F_Bill_DATE_MOVE
This Perform is used for getting Billing date According to Delivery *
Date(Output date) *
FORM f_bill_date_move.
g_datum = p_date + 10.
g_month = g_datum+4(2).
g_year = g_datum+0(4).
IF g_month = 1.
 g_year = g_year - 1.
 g_month = 12.
 g_date = 1.
ELSE.
 g_month = g_month - 1.
 g_date = 1.
ENDIF.
Passing the date to billing date-low
CONCATENATE g_year g_month g_date INTO g_bill_low.
r_bdate-low = g_bill_low.
r_bdate-sign = 'I'.
r_bdate-option = 'BT'.
g_month1 = g_datum+4(2).
g_year1 = g_datum+0(4).
IF g_month1 = 1.
 g_year1 = g_year1 - 1.
 g_month1 = 12.
ELSE.
 g_month1 = g_month1 - 1.
ENDIF.
CASE g_month1.
 WHEN 1.g_date1 = '31'.
 WHEN 3.g_date1 = '31'.
 WHEN 4.g_date1 = '30'.
 WHEN 5.g_date1 = '31'.
 WHEN 6.g_date1 = '30'.
 WHEN 7.g_date1 = '31'.
 WHEN 8.g_date1 = '31'.
 WHEN 9.g_date1 = '30'.
 WHEN 10.g_date1 = '31'.
 WHEN 11.g_date1 = '30'.
 WHEN 12.g_date1 = '31'.
ENDCASE.
g_year2 = g_year1.
IF g_month1 = 2.
 g_year2 = g_year2 MOD 4 .
 IF g_year2 = 0.
 g_date1 = 29.
 ELSE.
 g_date1 = 28.
 ENDIF.
ENDIF.
Passing the date to billing date-high
CONCATENATE g_year1 g_month1 g_date1 INTO g_bill_high.
r_bdate-high = g_bill_high.
APPEND r_bdate.
ENDFORM. " F_Bill_DATE_MOVE
*& Form f_get_data
Selecting the data from tables VBRK,VBRP,KNVV,KNA1,KONV,KONP,LIKP, *
ZJPV_TORIHIKI and ZJPV_REBATE *
FORM f_get_data.
Selecting the data from VBRK into internal table T_VBRK.
SELECT vbeln
 vbtyp
 kunag
 vkorg
 vtweg
 kunrg
 fkart_rl
 fkdat
 mwsbk
 netwr
 waerk
 knumv
 FROM vbrk
 INTO TABLE t_vbrk
 WHERE fkdat BETWEEN r_bdate-low and r_bdate-high
 and RFBSK = C_RFBSK
 AND vbtyp IN ('N' , 'S' , 'M' , 'O' , 'P')
 AND vkorg = c_vkorg
 AND vtweg = c_vtweg
 AND netwr <> 0.
IF sy-subrc Eq 0.
 sort t_vbrk.
ENDIF.
Selecting the data from KNVV into internal table T_KNVV.
SELECT kunnr
 vkorg
 vtweg
 spart
 kvgr2
 vkbur
 FROM knvv
 INTO TABLE t_knvv
 FOR ALL ENTRIES IN t_vbrk WHERE ( kunnr = t_vbrk-kunag
 OR kunnr = t_vbrk-kunrg )
 AND vkorg = t_vbrk-vkorg
 AND vtweg = t_vbrk-vtweg
 AND spart = c_spart
 AND kvgr2 = c_kvgr2.
Selecting the data from VBRP into internal table T_VBRP.
SELECT vbeln
 posnr
 zjd_torihikikubn
 vgbel
 vgtyp
 zzjp_remarks
 zjd_kanamei
 fkimg
 netwr
 zjd_touitsumatnr
 FROM vbrp
 INTO TABLE t_vbrp
 FOR ALL ENTRIES IN t_vbrk
 WHERE vbeln = t_vbrk-vbeln.
Selecting the data from ZJPV_REBATE into internal table T_ZJPV_REBATE.
SELECT fkart
 rebate_code
 rebate_name
 FROM zjpv_rebate
 INTO TABLE t_zjpv_rebate
 FOR ALL ENTRIES IN t_vbrk
 WHERE fkart = t_vbrk-fkart_rl.
Selecting the data from KNA1 into internal table T_KNA1.
SELECT kunnr
 name1
 name2
 FROM kna1
 INTO TABLE t_kna1
 FOR ALL ENTRIES IN t_knvv
 WHERE kunnr = t_knvv-kunnr.
IF NOT t_vbrp[] IS INITIAL.
Selecting the data from LIKP into internal table T_LIKP.
 SELECT vbeln
 kunnr
 FROM likp
 INTO TABLE t_likp
 FOR ALL ENTRIES IN t_vbrp
 WHERE vbeln = t_vbrp-vgbel.
ENDIF.
Selecting the data from KONV into internal table T_KONV.
SELECT knumv
 kposn
 kschl
 knumh
 FROM konv
 INTO TABLE t_konv
 FOR ALL ENTRIES IN t_vbrk
 WHERE knumv = t_vbrk-knumv
 AND kschl = c_kschl.
Selecting the data from KONP into internal table T_KONP.
SELECT knumh
 kbetr
 konwa
 FROM konp
 INTO TABLE t_konp
 FOR ALL ENTRIES IN t_konv
 WHERE knumh = t_konv-knumh.
Selecting the data from ZJPV_TORIHIKI into internal table
T_ZJPV_TORIHIKI.
SELECT kubun
 rep_grp
 rep_grp_name
 FROM zjpv_torihiki
 INTO TABLE t_zjpv_torihiki
 FOR ALL ENTRIES IN t_vbrp
 WHERE kubun = t_vbrp-zjd_torihikikubn.
ENDFORM. " f_get_data
*& Form f_process_data
Reading The Data from Internal tables (T_VBRK,T_VBRP,T_KNVV,T_KNA1, *
T_LIKP,T_KONV,T_KONP,T_ZJPV_REBATE and T_ZJP_TORIHIKI) *
FORM f_process_data.
Sorting the internal table t_kna1, t_vbrk, t_vbrp ,t_knvv,t_kna1,
t_likp and t_zjpv_rebate
SORT: t_kna1 BY kunnr,
 t_vbrk BY vbeln,
 t_vbrp BY vbeln,
 t_knvv BY kunnr,
 t_zjpv_rebate BY fkart,
 t_knvv BY kunnr vkorg vtweg spart,
 t_likp BY vbeln.
LOOP AT t_vbrk.
Reading the data from internal table t_knvv
 READ TABLE t_knvv WITH KEY kunnr = t_vbrk-kunag
 vkorg = t_vbrk-vkorg
 vtweg = t_vbrk-vtweg
 spart = c_spart
 kvgr2 = c_kvgr2.
 IF sy-subrc NE 0.
 g_flg = 'X'.
 ENDIF.
Reading the data from internal table t_knvv
 READ TABLE t_knvv WITH KEY kunnr = t_vbrk-kunrg
 vkorg = t_vbrk-vkorg
 vtweg = t_vbrk-vtweg
 spart = c_spart
 kvgr2 = c_kvgr2.
 IF sy-subrc NE 0.
 G_FLG1 = 'X'.
 ENDIF.
 IF G_FLG = 'X' AND G_FLG1 = 'X'.
 DELETE T_VBRK.
 CLEAR: G_FLG, G_FLG1.
 CONTINUE.
 ENDIF.
ENDLOOP.
DATA : l_sign(1) TYPE c VALUE '-',
 l_ctax(15) TYPE n ,
 l_tamnt(15) TYPE n ,
 l_volume(16) TYPE c,
 l_gtotal(15) TYPE n,
 l_amnt(15) TYPE n.
SORT t_konv BY knumv kposn kschl.
SORT t_konp BY knumh.
LOOP AT t_vbrp.
 READ TABLE t_vbrk WITH KEY vbeln = t_vbrp-vbeln.
 IF sy-subrc <> 0.
 DELETE t_vbrp.
 CONTINUE.
 ENDIF.
Reading the data from Internal table T_zjpv_rebate(Rebate table)
 READ TABLE t_zjpv_rebate WITH KEY
 fkart = t_vbrk-fkart_rl
 BINARY SEARCH.
 IF sy-subrc NE 0 OR t_vbrk-fkart_rl EQ c_fkart.
 MOVE t_vbrk-kunag TO t_oput-tpcode.
 ELSE .
 IF t_vbrk-fkart_rl NE c_fkart.
 MOVE t_vbrk-kunrg TO t_oput-tpcode.
 ENDIF.
 ENDIF.
 READ TABLE t_zjpv_rebate WITH KEY
 fkart = t_vbrk-fkart_rl
 BINARY SEARCH.
 IF sy-subrc NE 0.
Passing the last 6 values of ZJD_TOUITSUMANTR into product code.
 MOVE t_vbrp-zjd_touitsumatnr+3(6) TO t_oput-pcode.
 MOVE t_vbrp-zjd_kanamei TO t_oput-pname.
 ELSE.
 MOVE t_zjpv_rebate-rebate_code+3(6) TO t_oput-pcode.
 MOVE t_zjpv_rebate-rebate_name TO t_oput-pname.
 ENDIF.
Reading the data from Internal table T_KNA1(Customer Master)
 READ TABLE t_kna1 WITH KEY
 kunnr = t_oput-tpcode BINARY SEARCH.
 IF sy-subrc = 0.
 MOVE t_kna1-name1 TO t_oput-tpname1.
 MOVE t_kna1-name2 TO t_oput-tpname2.
 ENDIF.
Reading the data from Internal table T_vbrp(Billing Documnet: Item)
 MOVE t_vbrp-zjd_torihikikubn TO t_oput-zjd_torihikikubn.
Reading the data from Internal table T_KNVV
 READ TABLE t_knvv WITH KEY kunnr = t_vbrk-kunrg
 vkorg = c_vkorg
 vtweg = c_vtweg
 spart = c_spart
 BINARY SEARCH.
 IF sy-subrc EQ 0.
 MOVE t_knvv-vkbur TO t_oput-rbcode.
 ENDIF.
Reading the data from Internal table T_LIKP (Delivery : Header)
 IF t_vbrp-vgtyp = 'J' OR t_vbrp-vgtyp = 'T'.
 READ TABLE t_likp WITH KEY
 vbeln = t_vbrp-vgbel
 BINARY SEARCH.
 IF sy-subrc = 0.
 MOVE t_likp-kunnr TO t_oput-dcode.
 ENDIF.
 ENDIF.
Reading the data from Internal table T_KNA1.
 READ TABLE t_kna1 WITH KEY kunnr = t_likp-kunnr BINARY SEARCH.
 IF sy-subrc = 0 AND NOT t_oput-dcode IS INITIAL.
 MOVE t_kna1-name2 TO t_oput-dname.
 ENDIF.
*Passing the values from internal table t_vbrk and t_vbrp to
*out put internal table.
 MOVE t_vbrk-fkdat TO t_oput-fkdat.
 CONCATENATE t_oput-fkdat0(4) '.' t_oput-fkdat4(2) '.'
 t_oput-fkdat+6(2) INTO t_oput-fkdat.
 MOVE t_vbrk-vbeln TO t_oput-vbeln.
 MOVE t_vbrp-posnr TO t_oput-posnr.
 MOVE t_vbrp-zzjp_remarks TO t_oput-zzjp_remarks.
*Checking for billing document category.
 IF t_vbrk-vbtyp = 'M' OR t_vbrk-vbtyp = 'P' OR t_vbrk-vbtyp = 'S'.
 IF t_vbrk-waerk = c_waerk.
 t_oput-ctax = t_vbrk-mwsbk * 100.
 t_oput-tamnt = t_vbrk-netwr * 100.
 t_oput-gtotal = t_oput-ctax + t_oput-tamnt.
 ELSE.
 t_oput-ctax = t_vbrk-mwsbk .
 t_oput-tamnt = t_vbrk-netwr.
 t_oput-gtotal = t_oput-ctax + t_oput-tamnt.
 ENDIF.
 ENDIF.
 IF t_vbrk-vbtyp = 'O' OR t_vbrk-vbtyp = 'N' .
 IF t_vbrk-waerk = c_waerk.
 l_ctax = ( t_vbrk-mwsbk * 100 ) .
*The contents of the consumption tax are converted to display format.
 PERFORM F_ALPHA_CONV USING L_CTAX.
 CONCATENATE l_sign l_ctax INTO t_oput-ctax.
 CONDENSE t_oput-ctax.
 l_tamnt = ( t_vbrk-netwr * 100 ).
*The contents of the total amount are converted to display format.
 PERFORM F_ALPHA_CONV USING L_TAMNT.
 CONCATENATE l_sign l_tamnt INTO t_oput-tamnt.
 CONDENSE t_oput-tamnt.
 l_gtotal = t_oput-ctax + t_oput-tamnt.
*The contents of the grand total are converted to display format.
 PERFORM F_ALPHA_CONV USING L_GTOTAL.
 CONCATENATE l_sign l_gtotal INTO t_oput-gtotal.
 ELSE.
 l_ctax = t_vbrk-mwsbk.
*The contents of the consumption tax are converted to display format.
 PERFORM F_ALPHA_CONV USING L_CTAX.
 CONCATENATE l_sign l_ctax INTO t_oput-ctax.
 l_tamnt = ( t_vbrk-netwr ).
*The contents of the total amount are converted to display format.
 PERFORM F_ALPHA_CONV USING L_TAMNT.
 CONCATENATE l_sign l_tamnt INTO t_oput-tamnt.
 l_gtotal = ( t_oput-ctax + t_oput-tamnt ).
*The contents of the grand total are converted to display format.
 PERFORM F_ALPHA_CONV USING L_GTOTAL.
 CONCATENATE l_sign l_gtotal INTO t_oput-gtotal.
 ENDIF.
 ENDIF.
Comparing the volume with given conditions.
 IF t_vbrp-fkimg EQ 0.
 t_oput-volume = space.
 ELSEIF t_vbrp-fkimg NE 0.
 IF t_vbrk-vbtyp = 'M' OR t_vbrk-vbtyp = 'P' OR t_vbrk-vbtyp = 'S'.
 t_oput-volume = t_vbrp-fkimg.
 CALL FUNCTION 'ROUND'
 EXPORTING
 DECIMALS = 3
 input = t_oput-volume
 SIGN = ' '
 IMPORTING
 OUTPUT = t_oput-volume1
 EXCEPTIONS
 INPUT_INVALID = 1
 OVERFLOW = 2
 TYPE_INVALID = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 move t_oput-volume1 to t_oput-volume2.
 condense t_oput-volume2 no-gaps.
 ELSEIF t_vbrk-vbtyp = 'O' OR t_vbrk-vbtyp = 'N'.
 t_oput-volume = t_vbrp-fkimg.
 CALL FUNCTION 'ROUND'
 EXPORTING
 DECIMALS = 3
 input = t_oput-volume
 SIGN = ' '
 IMPORTING
 OUTPUT = t_oput-volume1
 EXCEPTIONS
 INPUT_INVALID = 1
 OVERFLOW = 2
 TYPE_INVALID = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 l_volume = t_oput-volume1.
*The contents of the volume are converted to display format.
 PERFORM F_ALPHA_CONV USING L_VOLUME.
 CONCATENATE l_sign l_volume INTO t_oput-volume2.
 condense t_oput-volume2 no-gaps.
 ENDIF.
 ENDIF.
*Unit price
 IF t_vbrp-fkimg EQ 0.
 t_oput-uprice = space.
 ELSE.
Reading The data from Internal Table T_KONV(Condition :Transactional)
 READ TABLE t_konv WITH KEY knumv = t_vbrk-knumv
 kposn = t_vbrp-posnr
 kschl = c_kschl
 BINARY SEARCH.
 IF sy-subrc = 0.
Reading The data from Internal Table T_KONP(Condition : Items)
 READ TABLE t_konp WITH KEY
 knumh = t_konv-knumh
 BINARY SEARCH.
 IF sy-subrc = 0.
 IF t_konp-konwa = c_konwa.
 t_oput-uprice = 100 * t_konp-kbetr.
 ELSE.
 t_oput-uprice = t_konp-kbetr.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
Caluculating the amount with given conditions
 IF t_zjpv_rebate-fkart = t_vbrk-fkart_rl.
 t_oput-amount = t_vbrk-netwr.
 ELSE.
 t_oput-amount = t_vbrp-netwr.
 ENDIF.
 IF t_vbrk-waerk EQ c_waerk.
 t_oput-amount = 100 * t_oput-amount.
 ENDIF.
 IF t_vbrk-vbtyp ='M' OR t_vbrk-vbtyp = 'P' OR
 t_vbrk-vbtyp = 'S'.
 ELSE.
 IF t_vbrk-vbtyp = 'O' OR t_vbrk-vbtyp = 'N'.
 IF t_oput-amount+15(1) = l_sign.
 l_amnt = t_oput-amount+0(15).
 PERFORM F_ALPHA_CONV USING L_AMNT.
 CONCATENATE l_sign l_amnt INTO t_oput-amount.
 ELSE.
 l_amnt = t_oput-amount.
 PERFORM F_ALPHA_CONV USING L_AMNT.
 CONCATENATE l_sign l_amnt INTO t_oput-amount.
 ENDIF.
 ENDIF.
 ENDIF.
Reading the data from Internal Table T_ZPV_TORIHIKI
 READ TABLE t_zjpv_torihiki WITH KEY
 kubun = t_vbrp-zjd_torihikikubn
 BINARY SEARCH.
 IF sy-subrc = 0.
 t_oput-bdgrp = t_zjpv_torihiki-rep_grp.
 t_oput-bdgnm = t_zjpv_torihiki-rep_grp_name.
 ENDIF.
 APPEND t_oput.
Clearing the memory of the internal tables.
 CLEAR: t_oput,
 t_vbrp,
 t_vbrk,
 t_kna1,
 t_knvv,
 t_zjpv_rebate,
 t_zjpv_torihiki,
 t_likp,
 t_konv,
 t_konp.
ENDLOOP.
ENDFORM. " f_process_data
*& Form f_output_data
 Output formatting
FORM f_output_data.
SORT t_oput BY rbcode
 tpcode
 bdgrp
 fkdat
 zjd_torihikikubn
 vbeln
 posnr.
DATA : l_volume(5) TYPE c,
 l_ctax(8) TYPE c.
MOVE t_oput-volume TO l_volume.
MOVE t_oput-ctax TO l_ctax.
DATA : l_ctax1(16) ,
 l_ctax2(16),
 l_vol1(14) ,
 l_vol3(8),
 l_vol2(14),
 l_tamt1(16),
 l_tamt2(16),
 l_gtotal1(16),
 l_gtotal2(16),
 l_uprice1(16),
 l_uprice2(16),
 l_amount1(16) TYPE c,
 l_amount2(16) TYPE c,
 l_fctax1(16) TYPE c,
 l_fctax2(16) TYPE c,
 l_ftamt1(16) TYPE c,
 l_ftamt2(16) TYPE c,
 l_ftotal1(16) TYPE c,
 l_ftotal2(16) TYPE c,
 l_sign(1) TYPE c VALUE '-'.
CONSTANTS c_minus VALUE '-'.
SORT t_konv BY knumv kposn kschl.
SORT t_oput BY zjd_torihikikubn vbeln posnr.
Printing Final Values.
LOOP AT t_oput.
Perform F_FORMAT_SUBTOTAL is used to align the value with the commas
for display purpose.
 L_CTAX2 = T_OPUT-CTAX.
 G_CTAX2 = T_OPUT-CTAX.
 PERFORM F_FORMAT_SUBTOTAL USING G_CTAX2
 C_CONS_8.
 CONDENSE T_OPUT-CTAX.
Perform F_FORMAT_SUBTOTAL is used to align the value with the commas
for display purpose.
 L_TAMT2 = T_OPUT-TAMNT.
 G_TAMT2 = T_OPUT-TAMNT.
 PERFORM F_FORMAT_SUBTOTAL USING G_TAMT2
 C_CONS_10.
 CONDENSE T_OPUT-TAMNT.
Perform F_FORMAT_SUBTOTAL is used to align the value with the commas
for display purpose.
 L_GTOTAL2 = T_OPUT-GTOTAL.
 G_GTOTAL2 = T_OPUT-GTOTAL.
 PERFORM F_FORMAT_SUBTOTAL USING G_GTOTAL2
 C_CONS_10.
 CONDENSE T_OPUT-GTOTAL.
Perform F_FORMAT_SUBTOTAL is used to align the value with the commas
for display purpose.
*Volume
 IF t_oput-volume >= 99999 OR t_oput-volume <= -99999.
 t_oput-volume = space.
 ELSE.
 l_vol1 = t_oput-volume.
 l_vol2 = t_oput-volume.
 CONDENSE l_vol1.
 CONDENSE l_vol2.
 IF l_vol1+0(1) EQ '-'.
 REPLACE '-' WITH space INTO l_vol1.
 ENDIF.
 CONDENSE l_vol1.
 WRITE l_vol1 TO g_vol RIGHT-JUSTIFIED.
 REPLACE '.' WITH ',' INTO l_vol1.
write :85 l_vol1.
 IF NOT g_vol+0(2) IS INITIAL.
 g_vol10(2) = g_vol0(2).
 g_vol1+2(1) = ','.
 ENDIF.
 IF NOT g_vol+2(3) IS INITIAL.
 g_vol13(3) = g_vol2(3).
 ENDIF.
replace '.' with ',' into t_oput-volume.
 l_vol2 = t_oput-volume.
 IF l_vol2+0(1) EQ '-'.
 g_vol2 = g_vol1 .
 CONDENSE g_vol2.
 CONCATENATE c_minus g_vol2 INTO g_vol2.
 ELSE.
 g_vol2 = g_vol1 .
 CONDENSE g_vol2.
 ENDIF.
 ENDIF.
L_VOL1 = T_OPUT-VOLUME.
PERFORM F_FORMAT_SUBTOTAL USING L_VOL1
 C_CONS_5.
CONDENSE L_VOL1.
Unit Price
 IF t_oput-uprice >= 99999999 OR t_oput-uprice <= -99999999.
 t_oput-uprice = space.
 ELSE.
 l_uprice1 = t_oput-uprice .
 l_uprice2 = t_oput-uprice.
 CONDENSE l_uprice1.
 CONDENSE l_uprice2.
 IF l_uprice1+0(1) EQ '-'.
 REPLACE '-' WITH space INTO l_uprice1.
 ENDIF.
 CONDENSE l_uprice1.
 WRITE l_uprice1 TO g_uprice RIGHT-JUSTIFIED.
 IF NOT g_uprice+0(2) IS INITIAL.
 g_uprice10(2) = g_uprice0(2).
 g_uprice1+2(1) = ','.
 ENDIF.
 IF NOT g_uprice+2(3) IS INITIAL.
 g_uprice13(3) = g_uprice2(3).
 g_uprice1+6(1) = ','.
 ENDIF.
 IF NOT g_uprice+5(3) IS INITIAL.
 g_uprice17(3) = g_uprice5(3).
 ENDIF.
 IF l_uprice2+0(1) EQ '-'.
 g_uprice2 = g_uprice1 .
 CONDENSE g_uprice2.
 CONCATENATE c_minus g_uprice2 INTO g_uprice2.
 ELSE.
 g_uprice2 = g_uprice1 .
 CONDENSE g_uprice2.
 ENDIF.
 ENDIF.
Amount
 IF t_oput-amount >= 99999999 OR t_oput-amount <= -99999999 .
 t_oput-amount = space.
 ELSE.
 l_amount1 = t_oput-amount.
 l_amount2 = t_oput-amount.
 CONDENSE l_amount1.
 CONDENSE l_amount2.
 IF l_amount1+0(1) EQ '-'.
 REPLACE '-' WITH space INTO l_amount1.
 ENDIF.
 CONDENSE l_amount1.
 WRITE l_amount1 TO g_amount RIGHT-JUSTIFIED.
 IF NOT g_amount+0(1) IS INITIAL.
 g_amount0(1) = g_amount0(1).
 g_amount1+1(1) = ','.
 ENDIF.
 IF NOT g_amount+1(3) IS INITIAL.
 g_amount12(3) = g_amount1(3).
 g_amount1+5(1) = ','.
 ENDIF.
 IF NOT g_amount+4(3) IS INITIAL.
 g_amount16(3) = g_amount4(3).
 g_amount1+9(1) = ','.
 ENDIF.
 IF NOT g_amount+7(3) IS INITIAL.
 g_amount110(3) = g_amount7(3).
 ENDIF.
 IF l_amount2+0(1) EQ '-'.
 g_amount2 = g_amount1 .
 CONDENSE g_amount2.
 CONCATENATE c_minus g_amount2 INTO g_amount2.
 ELSE.
 g_amount2 = g_amount1 .
 CONDENSE g_amount2.
 ENDIF.
 ENDIF.
 NEW-PAGE.
 MOVE t_oput-tpname1 TO l_tpname1.
 MOVE t_oput-tpname2 TO l_tpname2.
 MOVE t_oput-bdgnm TO l_bdgnm.
 AT NEW bdgrp.
 IF t_oput-rbcode CO '*'.
 t_oput-rbcode = space.
 ENDIF.
 IF t_oput-tpcode CO '*'.
 t_oput-tpcode = space.
 ENDIF.
 IF t_oput-tpname1 CO '*'.
 t_oput-tpname1 = space.
 ENDIF.
 IF t_oput-tpname2 CO '*'.
 t_oput-tpname2 = space.
 ENDIF.
 IF t_oput-bdgnm CO '*'.
 t_oput-bdgnm = space.
 ENDIF.
 PERFORM f_write_heading.
 ENDAT.
 AT NEW vbeln.
 IF sy-linno = 35 OR sy-linno = 1.
 NEW-PAGE.
 PERFORM f_write_heading.
 WRITE:/6 t_oput-fkdat , 18 t_oput-dcode+3(7) ,
 28 t_oput-vbeln+2(8) ,
 37 t_oput-dname+0(20) .
 ELSE.
 WRITE:/6 t_oput-fkdat , 18 t_oput-dcode+3(7) ,
 28 t_oput-vbeln+2(8) ,
 37 t_oput-dname+0(20) .
 ENDIF.
 ENDAT.
 WRITE:/6 t_oput-fkdat, 18 t_oput-dcode+3(7),
 28 t_oput-vbeln+2(8),
 37 t_oput-dname+0(20).
 IF sy-linno = 35 OR sy-linno = 1.
 NEW-PAGE.
 PERFORM f_write_heading.
 CONDENSE L_VOL1 NO-GAPS.
 MOVE l_vol1 TO l_vol3.
 WRITE:/6 t_oput-fkdat , 18 t_oput-dcode+3(7) ,
 28 t_oput-vbeln+2(8) ,
 37 t_oput-dname+0(20) .
 WRITE:/39 t_oput-pcode+3(6) ,
 50 t_oput-pname+0(25) ,
 79 t_oput-zjd_torihikikubn ,
 85 t_oput-volu

Help regarding alv report

i need to develop alv report which displays po and corresponding invoice receipt information.
what all fields can i include in invoice receipt information.please help on this.thanks in advance.credit will be given.

Hi,
Check the following link:
http://www.sapbrain.com/TUTORIALS/TECHNICAL/ALV_tutorial.html
http://www.sapbrain.com/ARTICLES/TECHNICAL/ABAP/company%20logo%20in%20the%20top%20of%20alv%20report.html
Regards,
Bhaskar

Regarding the report BTCTRNS1

I want to know that when we execute this report BTCTRNS1 what happens to the background job which is currently running on the system. or this report waits for the background job to finish

Hi,
This report BTCTRNS1 transfers all jobs with the status 'Released' to the status 'Rescheduled due to upgrade'.
The Active jobs which are currently running, are not effected by this report.
Hope this helps.
Regards,
Vijay.

Help regarding classical report

i want help reltated to classical report..
1 . i want to bold text for some lines ..how can i do it...plz tell me..
2 . when i m printing classical report then in the printed page it show date and description of program but i want to hide it. plz help me .
i m new in abap . thanks in advance..

Hi,
Changing font size in reports refer program DD_STYLE_TABLE.
use NO STANDARD PAGE HEADING to hide description of program.
Regards,
Anil

Constant crashing, can anyone help read the report?

Hi Everyone,
So I've had a macbook pro i5 15" since 2010. No major problems until recently, my computer will crash at random typically when media is involved. At the time of the crash the sound that is playing will repeat like a broken record and the screen will go black.
Example I'll be previewing hires .cr2 and .mov files and my computer will crash. It will also crash when I just have chrome open and I'm browsing the web, I'll copy a link to my clip board go to paste it and crash. Seems random but always happens when I perform an action.
I brought my macbook into the apple store for a diagnostic, they performed a basic one and said my battery had an issue on it and it could be replaced. However the crash happens all the time, my power cord is typically plugged in. The employee wanted me to leave it for a few days to perform an advance diagnostic and stress test, however I can't leave it there for a few days as I use it for work daily.
Thanks in advance everyone!
Paul
Interval Since Last Panic Report: 11556 sec
Panics Since Last Report:          1
Anonymous UUID:                    A098E2D3-3AB3-495D-9FAA-CC5185658318
Wed Dec 4 20:43:40 2013
panic(cpu 0 caller 0x9f5c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x802c3000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c509c38 : 0x21b837 (0x5dd7fc 0x5c509c6c 0x223ce1 0x0)
0x5c509c88 : 0x9f5c9b (0xc0b28c 0xc7b800 0xc19e60 0x0)
0x5c509d28 : 0xb10608 (0xa48e004 0xaf24004 0x100 0x29456a)
0x5c509d78 : 0xb07601 (0xaf24004 0x100 0x5c509da8 0x9e5778)
0x5c509da8 : 0x16db9a6 (0xaf24004 0x100 0x438004ee 0x0)
0x5c509ee8 : 0xb2f2b5 (0xaf24004 0xaf23004 0x0 0x0)
0x5c509f28 : 0x9fee7c (0xaf24004 0xaf23004 0x0 0x0)
0x5c509fc8 : 0x9fb55b (0x0 0x9 0x0 0x0)
0x5c50a178 : 0x9fd6e7 (0x0 0x600d600d 0x7027 0x5c50a1a8)
0x5c50a248 : 0xca710d (0xc1d00043 0xbeef0003 0xf491680 0x71)
0x5c50a2e8 : 0xca7685 (0x46352000 0xf491680 0xf433004 0x0)
0x5c50a328 : 0xc7eec3 (0x46352000 0xf491680 0xf433004 0x0)
0x5c50a358 : 0xca6cba (0x46352000 0xf491680 0xf433004 0x0)
0x5c50a378 : 0xc7e418 (0x46352000 0xf491680 0xf433004 0x0)
0x5c50a398 : 0xca7630 (0x46352000 0xf433000 0x2 0x2)
0x5c50a3d8 : 0xc81905 (0x46352000 0xf433000 0x0 0xf452000)
0x5c50a418 : 0xc7f325 (0x46352000 0x466f4000 0x46726000 0xa705e40)
0x5c50a468 : 0xcd24e9 (0x46352000 0x466f4000 0x46726000 0xa705e40)
0x5c50a4f8 : 0xcc3c9b (0xa705e40 0xf452000 0x0 0x1)
0x5c50a558 : 0xcc3f02 (0x466f4000 0x466f4788 0xf452000 0x0)
0x5c50a5a8 : 0xcc43d6 (0x466f4000 0x466f4788 0x5c50a8cc 0x5c50a86c)
0x5c50a8e8 : 0xcc11a1 (0x466f4000 0x466f4788 0x1 0x2209aa)
0x5c50a908 : 0xc8888f (0x466f4000 0x466f4788 0xf247d80 0x507617)
0x5c50a938 : 0xcc2c64 (0x466f4000 0x5c50aa7c 0x5c50a968 0x466f4000)
0x5c50a978 : 0xc8cc93 (0x466f4000 0x5c50aa7c 0x5c50aa7c 0x5c50a9e0)
0x5c50aab8 : 0xcc65d8 (0x466f4000 0x1 0x5c50abcc 0x5c50abc8)
0x5c50ab68 : 0xc88fe1 (0x466f4000 0x1 0x5c50abcc 0x5c50abc8)
0x5c50abe8 : 0x56da06 (0x466f4000 0x0 0x5c50ae3c 0x5c50ac74)
0x5c50ac38 : 0x56e2a5 (0xd17720 0x466f4000 0xc0f0288 0x1)
0x5c50ac88 : 0x56eb59 (0x466f4000 0x10 0x5c50acd0 0x0)
0x5c50ada8 : 0x286638 (0x466f4000 0x10 0xc0f0288 0x1)
0x5c50be58 : 0x21dbe5 (0xc0f0260 0x89315a0 0x1fd7e8 0x5d43)
0x5c50be98 : 0x210a86 (0xc0f0200 0x0 0xad15ce0 0xb1d9b90)
0x5c50bef8 : 0x216f84 (0xc0f0200 0x0 0x0 0x0)
0x5c50bf78 : 0x295c57 (0xa614e68 0x0 0x0 0x0)
0x5c50bfc8 : 0x2a256d (0xa614e64 0x1 0x10 0xfd8e3c0)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0xc7d000->0xd33fff
            dependency: com.apple.NVDAResman(6.4.0)@0x98f000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x982000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x960000
         com.apple.nvidia.nv50hal(6.4.0)@0x15a5000->0x19b9fff
            dependency: com.apple.NVDAResman(6.4.0)@0x98f000
         com.apple.NVDAResman(6.4.0)@0x98f000->0xc7cfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x982000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x960000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 9151355610649
unloaded kexts:
com.apple.driver.AppleUSBUHCI          4.2.0 (addr 0x1432000, size 0x65536) - last unloaded 212472997568
loaded kexts:
com.symantec.kext.SymAPComm          11.1.2f17
com.paceap.kext.pacesupport.snowleopard          5.7.2
com.Cycling74.driver.Soundflower          1.5.2
com.serato.usb.kext          2.3.0
com.symantec.kext.ips          3.2f8
com.symantec.kext.internetSecurity          1.3.2f5
com.apple.driver.IOBluetoothA2DPAudioDriver          2.4.5f3 - last loaded 36001490190
com.apple.driver.IOBluetoothBNEPDriver          2.4.5f3
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AGPM          100.12.31
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleIntelHDGraphics          6.4.0
com.apple.driver.AppleIntelHDGraphicsFB          6.4.0
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.GeForce          6.4.0
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.driver.AppleLPC          1.5.1
com.apple.kext.AppleSMCLMU          1.5.2d10
com.apple.driver.AppleUSBTCButtons          201.6
com.apple.driver.AppleUSBCardReader          2.6.1
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBTCKeyboard          201.6
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.driver.AppleSMC          3.1.0d5
com.apple.nvidia.nv50hal          6.4.0
com.apple.NVDAResman          6.4.0
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.driver.AppleUSBMultitouch          207.7
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD7500BPKT-75PK4T0, 698.64 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: iPhone, 0x05ac (Apple Inc.), 0x12a0, 0xfd130000 / 5
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3

You have added several extension to the Mac kernel that have a reputation for making it unstable:
com.symantec.kext.SymAPComm          11.1.2f17
com.paceap.kext.pacesupport.snowleopard          5.7.2
com.Cycling74.driver.Soundflower          1.5.2
com.serato.usb.kext          2.3.0
com.symantec.kext.ips          3.2f8
com.symantec.kext.internetSecurity          1.3.2f5
Probably the most important one to remove is Symantec. Their current Mac products are junk. Scanning your Mac OS looking for Windows viruses is not helpful.
Your version of Pace app is labeled as the snow leopard version. Pace app is installed by makers of expensive software packages who do not trust you not to steal them. You should contact them to find out how to un-Install or get an up-to-date version.
Also, yours is a 15" MacBook Pro 6,2 2010 -- there is a recall program in place for it. It is described in this article:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
PRINT out a copy of the article as a hedge against "we never heard of this." and take it to your appointment at the genius bar. Do not leave until they have run the special VST test that ends in a remarkable PASSED or FAILED screen. [The typical "overnight bake" will NOT find this problem].
N.B.> Even if the problem is detected, the time for free replacement may have already passed.
If they refuse to accept it for free repair under the program, the store manager may have additional latitude to help you. You MUST be polite and professional at all times. Apple wants you to be a happy customer. Folks who shout and threaten to sue everyone will never be a happy customer, so all they get is to be shown the door.
If the time has expired and you are not willing to pay for the repair yourself, downgrading Mac OS X will make the problem far less likely to occur.

Need Help Using the Report Painter

Hi experts,
i'm using report painter GRR1, how can i resize the Lead Column? i need it to increase its length, i had already maintained the texts(short middle and long texts).
Thanks for the help,
zryxel

Go to FORMATTING > COLUMNS > Select the Format Group and Edit Column Width.
Reward points if useful.
Salamat!
AJ

Help Regarding the Formula Variable

Hi,
We have a scenario where "CKF = RKF/Formula Variable". When we execute a Query in BEx Analyzer, for this particular CKF values are displaying as 'X'. (i.e Numeric values are not displaying)
When we check in the backend data is available for the RKF.
Can someone please guide on how to validate whether the Formula Variable is working fine or not?
Thanks in advance
Regards,
Seshendra Reddy

Hello,
This post caught my attention because I am facing a similar problem.
I created a Formula Variable with replacement path on Posting Date (0DATE Char), with exception aggregation = MAX and results calc = MAX. The purpose is to return the last posting date for a set of documents. However, it seems that if Posting Date is not in the drilldown, then the formula formula returns 'X'.
This limitation is not mentioned in SAP help... and seems to be a pretty big constraint if the reference char on the replacement path formula variables must be in the drilldown.
Does anyone know how to work around this?
Thanks!
Jenni.

Need help regarding QM Reports

Hi Experts
I am currently working on QM & PM queries ,
i am unable to map some feild in R3 ,
1) Cost:- External service cost,Internal Labour cost,Internal Material Cost,subcontract cost;(its a Pm module report requiremnt)
Cust Rejection
Cust Return Rework
Cust.Complaint visit
Warranty/Field Return cost
Cust line return qty
Field return qty
Cst line return rejectn qty
Dispatch qty
Can any one suggest me relevant feilds in R/3, so that i can extract them to BI . I am new to this module , Kindly update me ASAP.
Thanks in Advance
Regards,
Gane

Hi,
1)Goto SE16-->Tablename: RSOSFIELDMAP -->Table contents(F7)
2) Enter you DataSource name in OLTPSOURCE filed -->Execute
3)you can see the Infoobjects for the corresponding fields in your Datasource

Need help regarding the maximum limit for data type

Hi,
this is Sravan. for my application am inserting the bulk data in XML format into a column of Database table.
the sample inserted XML data will be in format... like
'<ACC count = "10">
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
</ACC>'
this data in XML can have more than 1000 accounts.
now, i need to take a Parameter value from XML node and write into a file. for this i have written a procedure by looping the Nodes from XML data and building Dynamic Query like..
if nvl(v_int, 0) > 0 then
v_sql := '';
 for v_count in 1..v_int
 loop
 if v_sql is null then
 v_sql := 'select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
 elsif v_sql is not null then
 v_sql := v_sql || ' union all select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
 end if;
 end loop;
end if;
i will get this variable "v_int" from <ACC count = "10"> ACC count Attribute, here 10 is the value for v_int variable but in real time the variable value can be more than 1000.
at the time of Building Dynamic Query I make using the Variable v_SQL which is of Data Type "Long",
this variable stores dynamic query which is build at the time of executing procedure but this v_sql Variable is throughing Exception that ....
"numeric or value error Character String Buffer is Too Small"... but Long Data type will store upto 2GB..
this variable cant able to hold much data which is dynamically build.
will you please help me to resolve this issue Or will u suggest me another method to pick the data from XML column.
thanks,
sravan.

user11176969 wrote:
i changed the code, now its working fine.
direct assigning the dynamic query to a Clob variable raised error.
for dynamic query building i used another variable and assigned this variable value to actual query variable.Nice!

Help Regarding the Reports in BI

Similar Messages

Maybe you are looking for