Help reqd for Tcode - Customer master

Hi all,
What is the t-code to get all the datas of Customer Master available in my SAP system.So that, i can export the same into my excel sheet file.
i tried in XD03 and table KNA1...both are not working out.
in KNA1 it's loading the datas to excel by screen/list wise which is showing in the
table list screen.
I want all the datas in can be viewd in the system and same also be loaded into excel file. (like MM60 for materials and MKVZ for vendors).
Pls do the needful.
thanks & regards
sankar.

Dear Sankar,
Kindly use T.Code "S_ALR_87012180" to get the customer master data.
Regards,
Bijal Shah

Similar Messages

  • Dual Control for Vendor/Customer Master Data

    We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?

    Dear,
    No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
    Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
    I hope this helps.
    Mauri

  • How to create a help view for a customized error message

    Hi all,
    Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
    Thanks very much!
    Bruce, Wen

    Hi Bruce,
    Could you brief your concerns again.
    Why don't you maintain long text in message class for long description.
    Regards,
    Ranjith N

  • Partner functions for SAP Customer Master

    I am in the MDM solution definition phase for SAP Customer Master at one of our Cients place. The requirement is to set up a central master data scenario where creation & modification of any customer record will be done via MDM. The following components of Netweaver are in the landscape - SAP MDM, EP, XI.
    I need clarification on the following points -
    -  Is it possible to set up the partner function in MDM, if so, how?
    -  Need to replicate the standard SAP functionality where the system can be configured to create Ship To, Payer, Bill To automatically when a Sold To record is created. Is this possible? Are there any work arounds?
    Regards
    Arvind

    Hi,
    Hi Arvind,
    -  Is it possible to set up the partner function in MDM, if so, how?
    Partner Function comes under Condition Technique in SAP ECC.here some config has to be done.
    For mapping it in MDM, First create a Qualified Table - Partner Function.Determine the Non-Qualifiers and Qualifiers.Then as said by Suresh, u need Java API stuff to complete this task and frontend being EP.
    - Need to replicate the standard SAP functionality where the system can be configured to create Ship To, Payer, Bill To automatically when a Sold To record is created. Is this possible? Are there any work arounds?
    It can be done using EP as front end and Java API to dertermine the partner based on the account group.
    Thanks,
    Felix
    Edited by: Felix on May 9, 2008 1:38 PM

  • Fast entry for extending customer master to other sales area??

    Hi,
    I have list of customer master, now the requirement is to extend 60-70% of the customers to a different sales area, Is there any tcode, like fast entry for extending the customer master to the new sales area??
    Thanks
    Ghanesh
    Edited by: Ghanesh Visu on Feb 24, 2010 10:55 AM

    Hi Ghanesh,
    Below are a few helpful links on how to use MASS.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/408104b5-8ad2-2c10-8383-9b07a2727c4e
    http://www.sap-img.com/sap-sd/sales-order-mass-change.htm
    http://sap-helper.blogspot.com/2009/03/mass-maintenance-processing-tcode-mass.html
    If you are using this tool for the first time, i would not suggest directly using it on Production.  Use it few times on Test client for making yourself familiar with this tool. It is a very powerful tool and changes made from this cannot be undone.
    You can also use LSMW to run mass data.  Few links for LSMW are as below:
    LSMW
    Thanks
    Kapil Sharma

  • Function Module or BAPI for Change Customer Master in Background

    Hi,
    I would like to ask is there any Function Module or BAPI to change the Customer Master in the Background
    Thanks.

    Hi
    Please check the following link
    [FM|http://help.sap.com/saphelp_nw04/helpdata/EN/8f/53b67ad30be445b0ccc968d69bc6ff/content.htm]
    [FM for BAPI|Is there a BAPI or Function module can create a Customer Master record?]
    Hope this link helps you
    Regards,
    Rajani

  • Need a BAPI for FD01(customer Master data creation)

    Hi Experts,
      i want to upload a data from Legacy to sap for FD01 Tcode for Customer master creation, and what is the key points to dev bapi.
    can anyone give me the BAPI for FD01.
    Thanks,
    sudha.

    Hi,
    use bapi 'BAPI_CUSTOMER_CREATE' to create customer and bapi
    'BAPI_VENDOR_CREATE' to create vendor.
    Regards,
    SuryaD.

  • User Exit for managing Customer Master Texts- Urgent

    Hi All,
    I have a requirement in which the the Customer Master Central texts for certain text Id's are to be maintained in such a way via XD02 that whenever any changes are made and it is saved the changes become non editable and added with user date and time and then the user can add additional line of texts but cannot edit the earlier ones. So in this way the earlier texts are prevented from accidental deletion and any new addition has a stamp( User,date,time) to determine who changed it and when. I searcehd for any exit in the program but could find only one i.e. EXIT_SAPMF02D_001
    Is this requirement faesible in standard SAP?
    Now to me this exit could not serve any purpose.Please help.
    thanks,
    Manish

    Hi,
         use the following BADI's which will suitable for ur reqirement
    business Add-In CUSTOMER_ADD_DATA_CS .
    business Add-In CUSTOMER_ADD_DATA
    Regards

  • Help Needed to learn Customer Master

    Hi,
    I need to learn Customer master in order to work on a assignment in SAP MDM. Can anyone help me with relevant information to start learning Customer Master in SAP and the maping between SAP ECC and SAP MDM.
    Thanks in advance.
    Regards
    Girish Nair

    Dear Girish,
    Thanks for the links...
    I found below notes...
    1255401     MDM Material Content Information (Release 5.5)     26.02.2010
    1355137     MDM Material Content Information (Release 7.1+)     26.02.2010
    1252846     MDM Product Content Information               26.02.2010
    1268212     MDM Employee Content Information          26.02.2010
    1035773     MDM Business Partner Content Information     26.02.2010
    1252884     MDM Customer Content Information (Release 5.5)     26.02.2010
    1412742     MDM Customer Content Information (Release 7.1+)     26.02.2010
    1252883     MDM Vendor Content Information (Release 5.5)     26.02.2010
    1318478     MDM Vendor Content Information (Release 7.1+)     26.02.2010
    1029357     MDM 5.5 SP05 Product Repository Information     15.06.2007
    1088786     MDM 5.5 SP06 Product Repository Information     27.11.2007
    989939     MDM 5.5 SP04 Product Repository Information     31.10.2006
    I was interested in the attached excel's in these links which shows MDM - IDoc - ERP field mappings...
    Thanks & Regards,
    Shaailesh.

  • Need LSMW Material for NEW Customer Master Upoad

    Do any one have material on LSMW for uploading New Customer Master Record with screenshots. I have Material on updating/changing the Cutomer Master Record, But i want to Upload New.
    Please post the link here or send to [email protected]
    Points are assure for right material.
    Thank you
    Satish

    Hello Ranjit,
    Thanks for your generosity. I dont have any issue (FYI, please have a look at MM forum where I am one of the active contributor)
    My concern is if you send any file to personal email ID then other SDNer will not get any benifits from your valuable suggestion/inputs. so instead you can sent it to SDN moderator who will help to upload the document and provide you link which you can include in your reply. (see the process in welcome and rule of engagement thread).
    We all are here to help eachother, but of course we can not exclude other SDNer when giving our inputs.
    Thanks for understanding.
    Regards,
    Arif Mansuri

  • F1 help documentation for TCODE

    Dear all,
               I have installed ECC6 IDES and   F1  help documents on any of the tabs/Transaction in SAP menu its not giving any functional description . For only few Tcodes its showing document of Functional description and in most of the Tabs/Tcodes im getting error like "No documentation exists" Message no. BMEN355
    . Can anyone kindly suggest for configuration for this F1 help for TCODEs.
    Regards
    Vinay

    Hi Flavia,
              Thanks for your response.
                  Do i hav to configure SAP LIBRARY with HTML help in SR13???.. for F1 help??.
    Regards
    Vinay

  • RFC for creating Customer Master

    Hi All,
              If anyone has created any RFC or has consumed standard RFC for the following SD requirements , please let me know.
    1. Creating a new customer centrally, also should be able to update partners.
    2. Extending customer to a new sales organization
    3. Adding partners to existing customer (This should overwrite any existing partner)
    4. Any BAPI/RFC specific to SIN version as Indian customer needs Excise data also to be updated.
    Thanks
    Kiran

    Hi the best way is to go for LSMW.
    Direct Input program is available for Customer Master load.
    So you can go for LSMW using Direct Input method.
    Here are the program details.. LSMW Screen..
    Object               0050   Customer master
    Method               0000
    Program Name         RFBIDE00
    Program Type         B   Batch Input
    Message was edited by:
            Rama Jyothi

  • Service for creating customer master - company code data....

    Hi
    I would like to know if there is a service to create customer master company code data?
    I have identified 2 services one for general data (CustomerERPCreateRequestConfirmation_In) and sales area data (SalesArrangementERPCreateRequestConfirmation_In).
    Regards
    Srinivas Dusi

    Here is the answer: Yes it is possible. Download the file, using option - File Download. File should include all key attributes & also attributes that needs to be updated. (Key here is to have appropriate assignment ID. )
    Use the same file for File Upload (modify attributes like Sort Key as required).

  • Help reqd for Custom Cell Renderer

    Folks,
    I have written a small custom defined cell renderer which displays
    a list
    When the first item is selected,the focus turns to red
    When the 2nd item is selected,1 and 2 items turn to red.
    (Obviously as I am setting the background to red)
    I just need to change the color of the focus element only.
    ie when i click the 1st element,focus changes to red.
    when i click the 2nd element,only the 2nd element becomes red and not the 1st and 2nd element
    Can any one please see the code I have written and suggest a change?
    class FTRDListCellRenderer extends JLabel implements ListCellRenderer {
                         public FTRDListCellRenderer(){
                      private final JLabel label = new JLabel();
                      label.setOpaque(true);
                          public Component getListCellRendererComponent(
                   JList list, Object value,int index,
                   boolean isSelected, boolean cellHasFocus) {
                          label.setText(value.toString());
                             if(isSelected){
                    label.setBackground(isSelected ? Color.red : Color.yellow);
                              else{
                         return label;

    xpost
    http://forum.java.sun.com/thread.jsp?forum=31&thread=490864&tstart=0&trange=15

  • Help req for check customer table maintenance with XD02 if not throw error

    hello ABAP GURUS,
    check customer of the table maintenance with XD02 if not throw error i have given the codition for passing the values in the table but before that it has to check whether the customer i am passing in to the table is a customer from xd02.Here whatever no i am passing it is accepting it should not happen, but when i give the customer which is not a customer it should not accept but it has to throw the message as 'customer does not exist.Its urgent please help me
    TYPES: BEGIN OF TY_KNVI,
    KUNNR TYPE KUNNR,
    TATYP TYPE TATYP,
    TAXKD TYPE TAKLD,
    END OF TY_KNVI.
    DATA : VALIDFROM TYPE GUEBG,
    VALIDTO TYPE GUEEN.
    DATA : IT_KNVI TYPE STANDARD TABLE OF TY_KNVI,
    WA_KNVI TYPE TY_KNVI OCCURS 0 WITH HEADER LINE.
    DATA : V_NAME TYPE SYUNAME.
    SELECT KUNNR
    TATYP
    TAXKD
    FROM KNVI
    INTO TABLE WA_KNVI
    WHERE KUNNR = YYV_CFORM-KUNNR
    AND TATYP = 'ZCST'
    AND TAXKD = '1'.
    V_NAME = SY-UNAME.
    YYV_CFORM-ENTEREDBY = V_NAME.
    IF SY-SUBRC NE 0.
    MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'.
    ENDIF.
    I have used the following code to enter the data into the table maintenance it is working fine and throwing the error when the tax type is not the one which i have given in the select statements but the problem is when i have given the customer no which is not there in the XD02 tcode, it is accepting and showing the error message as MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'. now i have to check the customer no from XD02 and if it is existing in that tcode it should allow to save in the table maintenance otherwise throw a message as the 'Customer no does not exist, this I am unable to write so how can i check please help me .
    thankx in advance.
    Edited by: soni khadary on Apr 22, 2008 7:55 AM

    Hi Kelly,
    I guess <wa_tab>-handle_style is of type lvc_t_styl therefore you can do the following:
    ls_edit-style = cl_gui_alv_grid=>mc_style_enabled.
    "I assume you know your non-key fields' names so you can use subrotuine to perform update on each of them
    ls_edit-fieldname =  'First field name' .
    PERFORM update ls_edit.
    ls_edit-fieldname =  'Second field name'.
    PERFORM update ls_edit.
    ls_edit-fieldname = 'Third field name'.
    PERFORM update ls_edit
    FORM update USING fs_edit type lvc_s_styl.
    field-symbols: <style_tab> type lvc_t_styl,
                         <style_wa> type lvc_s_styl.
    LOOP AT <tab> ASSIGNING <wa_tab>.
       if e_row = sy-tabix .
         "get you style table
         assign component 'HANDLE_STYLE' of structure <wa_tab> to <style_tab>.
         "as <style_tab> is typed fully you can read the row you are interested in
         read table <style_tab> assigning <style_wa> with key fieldname = fs_edit-fieldname
         if sy-subrc = 0.
           "update this entry
            <style_wa> = fs_edit.
    *        modify table <style_tab> from <style_wa>. 
         endif.
       endif.
    endloop.
    endform.
    Note!
    Though, this should work, the use of RTTI as Uwe suggested would be best practise approach as far as dynamic programming is concerned. Anyhow it is still up to you which one you pick.
    Regards
    Marcin
    I noticed now that this line is not necessary
    modify table <style_tab> from <style_wa>. 
    as we simply are working with field symbols, so changes made to <style_wa> are already visible in that table <style_tab>.
    Edited by: Marcin Pciak on Mar 15, 2009 12:44 PM

Maybe you are looking for