Need a BAPI for FD01(customer Master data creation)

Hi Experts,
  i want to upload a data from Legacy to sap for FD01 Tcode for Customer master creation, and what is the key points to dev bapi.
can anyone give me the BAPI for FD01.
Thanks,
sudha.

Hi,
use bapi 'BAPI_CUSTOMER_CREATE' to create customer and bapi
'BAPI_VENDOR_CREATE' to create vendor.
Regards,
SuryaD.

Similar Messages

  • Dual Control for Vendor/Customer Master Data

    We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?

    Dear,
    No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
    Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
    I hope this helps.
    Mauri

  • Customer master data creation

    Hello Folks,
    I need some confirmations please :
    1 . customer master data (cmd) is created at account group and company code level.
    So, if a  customer is a customer of 3 company codes of a company , 3 customer master records needs to be created where the number range of the customer code being the same and the company code is different and the account group remains the same?
    2. A  customer can buy from any sales area combination in company code, but only 1 customer master record is created ? If so, 1 customer code is for any Sales areas for a customer?
    So, Sales area is data fields in a customer master record and only account group and company code and the customer code are key fields in the definition of customer master record?
    Please confirm for me. Thanks.
    regards
    Ravi

    Hi Ravi,
    _Extension of the CMR_
    a.     If the Customer is buying from under 1 Company Code and multiple Sales Areas then you need to extend the CMR for all sales area.
    b.     However when the sales areas change the Customer No., General data and the Company code data does not change
    While Extending the CMR by changing the Sales Area:
    a.     In XD01 or VD01 enter the Account Group of the customer which is to be extended
    b.     Enter the customer no.
    c.     Enter the New sales area
    d.     The system will take you directly to the sales area data
    e.     The Company Code data and the General data cannot be chosen.
    While extending the CMR for different company codes:
    a.  In XD01 or VD01 enter the Account Group of the customer, which is to be extended
    b. Enter the customer no.
    c.     Enter the New Company code
    d.     The system will take you directly to the Company Code Data
    e.     The Sales Area Data and the General data cannot be chosen.
    While extending the CMR for different company codes and sales Areas:
    a.  In XD01 or VD01 enter the Account Group of the customer, which is to be extended
    b.  Enter the customer no.
    d.     Enter the New Company code
    e.     Enter the New Sales Area
    f.     The system will take you to the Company Code Data
    g.     Then you can go to the Sales area data.
    h.     The General data cannot be chosen.
    Tables Used for CMR:
    Table Name     Used For
    KNA1         General Data
    KNVV         Sales Area Data
    KNB1         Company Code Data
    Q. Why are there 3 Data Groups or 3 different Tables for one customer?
    Ans. Since the Customer is expected to buy in more than one sales area and also in some cases in more than one Company code different data sets need to be maintained but however some data remain same, so to avoid data redundancy you maintain 3 different tables.
    Hope this helps,
    J Nagesh

  • Error in Customer master data creation

    when I am creating customer master data, error is in sales area data :partner functions
    data is not complete:
    I can't proceed from there. If I choose account group 001, it is working, when I am doing with my own account grp gets eorror.
    I hope I did correct partner determination procedure.
    how to solve this?

    Hai Jobi Thottungal,
    Since you can create a Customer with Account type 001, please check what is the PARTNER TYPE assigned.
    Now, GO TO
    IMG Sales and DistributionMaster DataBusiness PartnersCustomersCustomer Hierarchy
    Set Up Partner Determination for Customer Master
    Partner Determination Procedure Assignment
    Assign the Partner procedure to your Account group
    So at the time of creation of Customer master with your Account group, the partner function will get created automatically.
    Regards,
    Mani

  • Co code not seen for cost center master data creation in OKEON

    hI:
               In org tab of Cost center master data creation while configuring cost center hierarchy in OKEON i can not see organization tab. I have checked in OKKP Co area is assigned to co code but still the issue persist.
    Br

    hi
    you mean the tab is not displayed? strange, it seems that there should be a screen layout to control the ui, or any transaction variant is recorded. I tried in my side, the tab is there.
    @ Murali, you are right, but in that tab, not only company code can be configured, but also business area, functional area etc.
    best regards, Lawrence

  • Function Module or BAPI for Change Customer Master in Background

    Hi,
    I would like to ask is there any Function Module or BAPI to change the Customer Master in the Background
    Thanks.

    Hi
    Please check the following link
    [FM|http://help.sap.com/saphelp_nw04/helpdata/EN/8f/53b67ad30be445b0ccc968d69bc6ff/content.htm]
    [FM for BAPI|Is there a BAPI or Function module can create a Customer Master record?]
    Hope this link helps you
    Regards,
    Rajani

  • BAPI for Changing Applicant Master Data

    Hi,
    We are trying to access our SAP R/3 remotely for the creation and
    maintenence of Applicant Master Data. We were able to identify the BAPI
    "BAPI_applicant_create" for the creation of an applicant but are unable
    to determine the BAPI required to maintain / change applicant data. Can
    you please assist us in this regard.
    regards,
    Bilal Nazir

    Hey
    I believe since there is no BAPI available so we could use the FM. And as far it being not remote enabled, i think thats not a major problem, we can always make a copy of it and make it remote enabled.
    If anyone has any other option in mind, please do share.
    Regards
    Bilal

  • Need LSMW Material for NEW Customer Master Upoad

    Do any one have material on LSMW for uploading New Customer Master Record with screenshots. I have Material on updating/changing the Cutomer Master Record, But i want to Upload New.
    Please post the link here or send to [email protected]
    Points are assure for right material.
    Thank you
    Satish

    Hello Ranjit,
    Thanks for your generosity. I dont have any issue (FYI, please have a look at MM forum where I am one of the active contributor)
    My concern is if you send any file to personal email ID then other SDNer will not get any benifits from your valuable suggestion/inputs. so instead you can sent it to SDN moderator who will help to upload the document and provide you link which you can include in your reply. (see the process in welcome and rule of engagement thread).
    We all are here to help eachother, but of course we can not exclude other SDNer when giving our inputs.
    Thanks for understanding.
    Regards,
    Arif Mansuri

  • Customer Master data creation with customized number range

    Dear all,
    Can somebody know how to create the customized number range for customers like first 2 digits represents Sales organization and next 2 digit should represent circle,next 2 distribution chaneel and last 4 digits shold be the running number.
    Looking for solution..
    Thanks & Regards,
    Murali.

    Hi,
    In your case you need to define as following
    Step No: 01.
    01.Sales Orgination with 0001 to 0099.
    02.Regions with 00 to 99.
    03.Distribustion Channel with 00 to 99
    Step No:02.
    Define PDP with the diffrent account groups defined for diffrent Sales Org, Regions & DC's.
    Step : No: 03.
    As per the above configs go to TCode for Number range for accounts groups in  XDN1. Say Example as
    XX--- From:1010100000 to: 1010109999. Note the possiable numbers are 0000 to 9999 only.
    10 is sales Org, 10 is Region & 10 is DC's.
    This is one of the way to do. The other way is to develo Z table and to use the user exit / new progarme to identify the requried number range with reference to Sales Org, Regions & DC's
    Hope this is fine with your requrment.
    Bye & enjoy SAP.
    Koganti.

  • Customer master data, Materials master data integration Integration in XI

    Dear Experts,
    I need your help in the following cases
    We are integrating MDM 5.5 to  ECC6.0 via XI 3.0.
    1. I am not able to understand  exactly what interfaces, mappings, integration scenarios from sap delivered MDM Business Content need to use for integrating  customer master data , Materials from MDM 5.5 to ECC 6, As we are using standard content.
    2. What idoc types  needs to be created in ECC  for these two scenarios ( customer, material /products).
    3. Is there any way to see the field mappings easily in XI , as the MDM standard business content for XI used xslt mapping programs .
    Could you please give helping hand with step by step procedure for customer, material integration in XI.
    Help is rewarded and greatly appreciated.
    Best Regards.
    nag.

    Hello Nag,
    1. I am not able to understand exactly what interfaces, mappings, integration scenarios from sap delivered MDM Business Content need to use for integrating customer master data , Materials from MDM 5.5 to ECC 6, As we are using standard content.
    If you import Business Content of MDM 5.5. You should easily figure out that by looking at the Message Mapping for DEBMAS03 IDoc.
    .2. What idoc types needs to be created in ECC for these two scenarios ( customer, material /products).
    No need to create any Master IDocs in SAP system. You can find them with the name DEBMAS (For Customer) and MATMAS (Material).
    3. Is there any way to see the field mappings easily in XI , as the MDM standard business content for XI used xslt mapping programs .
    If you really want to know how the XSL Mapping is programmed. You can export the XSL from XI  and open it in standard XML /XSL editor (say Stylus Studio ) to see how the output is programmed
    Regards,
    Ashwin M
    Dont forget to mark helpful answers

  • Change Message Control for Customer Master data

    Hi Friends,
    I have to choose/populate a message when the user is about to create an already existing customer.
    In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
    OK...
    When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
    Now .....
    I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
    I want to have the same message with message types 'E','E', and 'I' respectively.......
    How is this possible (or) what should i do to meet my requirement :-|
    Expecting ur answers
    Thanks in advance ........
    Cheers,
    R.Kripa.

    Hey yes it is not possible (as of now
    I ve met the requirement by just using message statement in the program itself ............
    My requirement is met but still if anyone knows about this do answer / reply
    Thanks
    Cheers,
    R.Kripa.

  • Query in customer master data upload ....?

    Hi Guru's,
    I am uploading the customer master data from presentaion server to customer tables using functional module SD_CUSTOMER_MAINTAIN_ALL.
    while check the Function module separatly and it working properley and i am able to ctere customer...
    and i am using the same function module in the program i am unable to upload ..could please check and let me know where i am doing mistake in the below program logis..and values also moving properly before calling function module..while calling the functinal module the controle comming out of the loop and program went to dump i am able to see the message in dump as like this(it may helpfull for resolve):
    Name of function module...............: "SD_CUSTOMER_MAINTAIN_ALL"
    Name of formal parameter..............: "O_KNA1"
    Technical type of actual parameter....: "C"
    Technical length of actual parameter..: 20 bytes
    Technical type of formal parameter....: "u"
    Technical length of formal parameter..: 3634 bytes
    Name of formal parameter at caller....: "O_KNA1"
    *& Report  ZERP_CUSTOMER_CREATE_UPLOAD
    REPORT  zerp_customer_create_upload.
    PARAMETERS:p_files        TYPE string.
    *DATA :xkunnr(10)      LIKE kna1-kunnr.  "unique KUNNR
    DATA: gs_i_kna1           TYPE kna1,
          gs_i_knb1             TYPE knb1,
          gs_i_knvv           TYPE knvv,
          gs_return           TYPE bapireturn1,
          gs_i_bapiaddr1      TYPE   bapiaddr1,
          gt_t_xknvi          TYPE STANDARD TABLE OF fknvi,
          gwa_t_xknvi         TYPE fknvi,
          gt_t_xknbk          TYPE STANDARD TABLE OF fknbk,
          gwa_t_xknbk         TYPE fknbk,
          gt_t_yknvp          TYPE STANDARD TABLE OF fknvp,
          gwa_t_xknvp         TYPE fknvp.
    TYPES:BEGIN OF gty_itab1,
          abc(305),
          END OF gty_itab1.
    DATA: gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
          gwa_itab1 TYPE gty_itab1.
    TYPES :BEGIN OF gty_itab2,
           ktokd(4),        "customer account grp      kna1
           kunnr(10),       "customer                  kna1
           name1(35),       "name1                     kna1
           sortl(10),       "sort filed                kna1
           stras(35),       "house number and adres    kna1
           pstlz(10),       "postal code               kna1
           ort01(35),       "city                      kna1
           land1(3),        "country                   kna1
           telf1(16),       "tele phone no             kna1
           telfx(31),       "fax num                   kna1
           kukla(2),        "cust classificaion        kna1
           bukrs(4),        "company code              knb1
           akont(10),       "reconcilation acct        knb1
           vkorg(4),        "sales org                 knvv
           vtweg(2),        "distr chan                knvv
           spart(2),        "division                  knvv
           zterm(4),        "terms of payment          knvv
           bzirk(6),        "sales district            knvv
           vkbur(4),        "sales office              knvv
           vkgrp(3),        "sales grp                 knvv
           kdgrp(2),        "cust grp                  knvv
           waers(5),        "currency                  knvv
           konda(2),        "price grp                 knvv
           kalks(1),        "pricing procedure assign  knvv
           lprio(2),        "delivery plant            knvv
           vsbed(2),        "shipping conditions       knvv
           vwerk(4),        "delivering plant          knvv
           inco1(3),        "inco1                     knvv
           inco2(28),       "inco2                     knvv
           kkber(4),        "cred control area         knvv
           ktgrd(2),        "acc assgn grp             knvv
           taxkd(1),        "tax classification 4 cust knvi
           bankn(18),       "bank account number       knbk -
            xkunnr(10),
           END OF gty_itab2.
    DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
          gwa_itab2 TYPE gty_itab2.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = p_files
        filetype                = 'ASC'
      TABLES
        data_tab                = gt_itab1
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        OTHERS                  = 17.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    LOOP AT gt_itab1 INTO gwa_itab1.
      gwa_itab2 = gwa_itab1-abc(305).
      APPEND gwa_itab2 TO gt_itab2.
    ENDLOOP.
    LOOP AT gt_itab2 INTO gwa_itab2.
      SPLIT gwa_itab2 AT ',' INTO gwa_itab2-ktokd
                                  gwa_itab2-kunnr
                                  gwa_itab2-name1 gwa_itab2-sortl
                                  gwa_itab2-stras gwa_itab2-pstlz
                                  gwa_itab2-ort01 gwa_itab2-land1
                                  gwa_itab2-telf1 gwa_itab2-telfx
                                  gwa_itab2-kukla gwa_itab2-bukrs
                                  gwa_itab2-akont gwa_itab2-vkorg
                                  gwa_itab2-vtweg gwa_itab2-spart
                                  gwa_itab2-zterm gwa_itab2-bzirk
                                  gwa_itab2-vkbur gwa_itab2-vkgrp
                                  gwa_itab2-kdgrp gwa_itab2-waers
                                  gwa_itab2-konda gwa_itab2-kalks
                                  gwa_itab2-lprio gwa_itab2-vsbed
                                  gwa_itab2-vwerk gwa_itab2-inco1
                                  gwa_itab2-inco2 gwa_itab2-kkber
                                  gwa_itab2-ktgrd
                                  gwa_itab2-taxkd
                                  gwa_itab2-bankn.
    *moving files values from ITAB2 work area to global structure related to FM.
      gs_i_kna1-ktokd   = gwa_itab2-ktokd.
      gs_i_kna1-kunnr   = gwa_itab2-kunnr.
      gs_i_kna1-name1   = gwa_itab2-name1.
      gs_i_kna1-sortl   = gwa_itab2-sortl.
      gs_i_kna1-stras   = gwa_itab2-stras.
      gs_i_kna1-pstlz   = gwa_itab2-pstlz.
      gs_i_kna1-ort01   = gwa_itab2-ort01.
      gs_i_kna1-regio   = gwa_itab2-land1.
      gs_i_kna1-telf1   = gwa_itab2-telf1.
      gs_i_kna1-telfx   = gwa_itab2-telfx.
      gs_i_kna1-kukla   = gwa_itab2-kukla.
      gs_i_knb1-bukrs   = gwa_itab2-bukrs.
      gs_i_knb1-akont   = gwa_itab2-akont.
    *I FOR GOT TO INCLUDE THE ZTERM VALUE IN EXCELL SHEET SO INCLUDED HARD CODE HERE
      gs_i_knb1-zterm   = '0001'.
      gs_i_knvv-vkorg   = gwa_itab2-vkorg.
      gs_i_knvv-vtweg   = gwa_itab2-vtweg.
      gs_i_knvv-spart   = gwa_itab2-spart.
      gs_i_knvv-zterm   = gwa_itab2-zterm.
      gs_i_knvv-bzirk   = gwa_itab2-bzirk.
      gs_i_knvv-vkbur   = gwa_itab2-vkbur.
      gs_i_knvv-vkgrp   = gwa_itab2-vkgrp.
      gs_i_knvv-kdgrp   = gwa_itab2-kdgrp.
      gs_i_knvv-waers   = gwa_itab2-waers.
      gs_i_knvv-konda   = gwa_itab2-konda.
      gs_i_knvv-kalks   = gwa_itab2-kalks.
      gs_i_knvv-lprio   = '02'.             "gwa_itab2-lprio.
      gs_i_knvv-vsbed   = gwa_itab2-vsbed.
      gs_i_knvv-vwerk   = gwa_itab2-vwerk.
      gs_i_knvv-inco1   = gwa_itab2-inco1.
      gs_i_knvv-inco2   = gwa_itab2-inco2.
      gs_i_knvv-kkber   = gwa_itab2-kkber.
      gs_i_knvv-ktgrd   = gwa_itab2-ktgrd.
      gwa_t_xknvi-tatyp  = 'UTXJ'.          "HARD CODE
      gwa_t_xknvi-aland  = 'US'.            "HARD CODED
      gwa_t_xknvi-kz     = '0'.             "HADR CODE
      gwa_t_xknvi-taxkd  = '0'.             "gwa_itab2-taxkd.
      APPEND gwa_t_xknvi TO gt_t_xknvi.
      gwa_t_xknbk-bankn  = gwa_itab2-bankn.
      APPEND gwa_t_xknbk TO gt_t_xknbk.
      gs_i_knb1-lockb          = 'X'.
      gs_i_knvv-kzazu          = 'X'.
      gs_i_knvv-kztlf          = 'X'.
      gs_i_knvv-perfk          = 'X'.
      gs_i_knvv-prfre          = 'X'.
      gs_i_kna1-spras          = 'EN'.
      CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
       EXPORTING
         i_kna1                              = gs_i_kna1
         i_knb1                              = gs_i_knb1
         i_knvv                              = gs_i_knvv
      I_BAPIADDR1                         =
      I_BAPIADDR2                         =
      I_MAINTAIN_ADDRESS_BY_KNA1          = ' '
      I_KNB1_REFERENCE                    = ' '
      I_FORCE_EXTERNAL_NUMBER_RANGE       = ' '
      I_NO_BANK_MASTER_UPDATE             = ' '
      I_CUSTOMER_IS_CONSUMER              = ' '
      I_RAISE_NO_BTE                      = ' '
      PI_POSTFLAG                         = ' '
      PI_CAM_CHANGED                      = ' '
      PI_ADD_ON_DATA                      =
      I_FROM_CUSTOMERMASTER               = ' '
    IMPORTING
      e_kunnr                             = xkunnr
      o_kna1                              = xkunnr
      E_SD_CUST_1321_DONE                 =
       TABLES
      T_XKNAS                             =
         t_xknbk                             = gt_t_xknbk
      T_XKNB5                             =
      T_XKNEX                             =
      T_XKNVA                             =
      T_XKNVD                             =
         t_xknvi                             = gt_t_xknvi
      T_XKNVK                             =
      T_XKNVL                             =
      T_XKNVP                             =
      T_XKNZA                             =
      T_YKNAS                             =
      T_YKNBK                             =
      T_YKNB5                             =
      T_YKNEX                             =
      T_YKNVA                             =
      T_YKNVD                             =
      T_YKNVI                             =
      T_YKNVK                             =
      T_YKNVL                             =
       t_yknvp                             = gt_t_yknvp
      T_YKNZA                             =
      T_UPD_TXT                           =
       EXCEPTIONS
         client_error                        = 1
         kna1_incomplete                     = 2
         knb1_incomplete                     = 3
         knb5_incomplete                     = 4
         knvv_incomplete                     = 5
         kunnr_not_unique                    = 6
         sales_area_not_unique               = 7
         sales_area_not_valid                = 8
         insert_update_conflict              = 9
         number_assignment_error             = 10
         number_not_in_range                 = 11
         number_range_not_extern             = 12
         number_range_not_intern             = 13
         account_group_not_valid             = 14
         parnr_invalid                       = 15
         bank_address_invalid                = 16
         tax_data_not_valid                  = 17
         no_authority                        = 18
         company_code_not_unique             = 19
         dunning_data_not_valid              = 20
         knb1_reference_invalid              = 21
         cam_error                           = 22
         OTHERS                              = 23.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF sy-subrc EQ 0.
        CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
        WRITE: / 'Error Message:', 'error in creation'.
      ELSE.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE: / 'costomer', gwa_itab2-kunnr, 'created'.
      ENDIF.
    ENDLOOP.

    please let me know if my qestion is not clear...
    and please cinfirm me ..that can i use the function module (SD_CUSTOMER_MAINTAIN_ALL) instead of BAPI (BAPI_CUSTOMER_CREATEFROMDATA1) for uploading customer master data.
    please respond me ASAP.
    thanks in advance and will give full points
    thanks&regards
    Srinivas.

  • Integrating MDG in Financial Self Service for Asset Master Data creation in CRM portal

    Hello Experts,
    I have a requirement in CRM box.
    If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
    Then a portal page will open in browser. There we have link Master Data Services.
    In that link we have standard sublinks for some financial master data creation.
    This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
    We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
    And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
    But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
    How to approach for this. Please suggest.
    Regards,
    Somnath Mitra

    Hello Experts,
    I have a requirement in CRM box.
    If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
    Then a portal page will open in browser. There we have link Master Data Services.
    In that link we have standard sublinks for some financial master data creation.
    This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
    We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
    And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
    But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
    How to approach for this. Please suggest.
    Regards,
    Somnath Mitra

  • End User Doc. Create / Change Customer Master Data

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
    Hi Experts,
    I would appreciate, if anyone of you could forward me the end user documents for creating & changing customer master data.
    sonicasmailbox at rediff
    Points will be assigned.
    Regards
    Sonica

    Hi
    Refer to help.sap.com for creating customer master data.
    Copy this to word document and it will be become user manual.
    http://help.sap.com/saphelp_ides/helpdata/en/47/ef8c64124811d2806f0000e8a495b3/content.htm
    Additionally refer to this weblink
    http://web.mit.edu/cao/www/AR/ar1/ar_FD01.htm - This if for FICO only.
    Changing customer master record.
    Use T.Code XD02.
    Enter Customer No,Company code,Sales Org, Distribution channel and division and press Enter or
    Enter Customer no,company code and click on customer's sales area, you will see Sales Org, Distribution channel and division,select the Sales org,Sales Org, Distribution channel and division and press enter.
    You can make necessary changes to customer master
    Please let me know if you need more information.
    Asssign points if useful.
    Regards
    Sridhar M

  • Customer Master Data - Validation / Substitution Rule

    Is there a way to perform a validation / substitution rule in the customer master data?
    Eg: In customer master, payment history checkbox is a required field so the user will always have to tick the checkbox when creating a customer master.
    Question: how to make this payment history checkbox defaulted to tick so that user don't have to manually tick it themselves when creating customer master.
    Is there a validation / substitution that can be performed in customer master because in accounting document, we will be able to perform the validation/substitution.

    Hi
    You could potentially use a BADI to substitute the data.  IMG > Financial Accounting > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Adoption of Customer's Own Master Data Fields > Business Add-In: Customer Subscreens
    You'd need to get an ABAPer to code the change in the relevant Method.
    Kylie

Maybe you are looking for