HELP Sending IDOC

Hi,
I want to send an IDOC but get the following error message:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MYSEND</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>IDoc Interface MYINTERFACE konnte nicht interpretiert werden</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Another thread says that the problem is that the Inbound interface doesn't match the namespace urn:sap-com:document:sap:idoc:messages
and that it would be necessary to name the interfaces the same as the IDOC type (here: COND_A.COND_A02). From which software component can I import the namespace???
Any help will be appreciated, kind regards,
Heiko
PS: Is there a blog about this topic?

IDOC -> XI -> File ....
Points to note ...
1. you dont need a DT, MT or a message interface for the IDOC as it itself acts as the Messg. Interface.
2. You import the IDOC and use the same in your mapping.
3. in the configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
~~ ShabZ ~~
Opps just noted that you need to sent an IDOC from XI (File to IDOC)
Anyway in this case,
points 1 and 2 will remain, but the 3 will not. you will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref : /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
File -> IDOC -> /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping (It concentrates on XSLT mapping but also gives an idea about the configuration part.Do go thru that, it might help you.)
Message was edited by: Shabarish Vijayakumar

Similar Messages

I need help to send idocs from 1 client to another , both in different systems

Hi all,
I am new to Idoc. I am trying to use idoc to send some table records of a custom table created in client 800 to client 020, both clients are in different systems.
I found examples of same scenario but for both clients in same system..
what changes should I make then to be able to send idoc .
any link showing step by step instructions would be great.
Thank you.

1. If you insist on keying in Pr; use the color or chroma key. If you want a quality product use a compositor like AE to do your keying.
2. Export to Encore

Sending Idocs from SAP-R/3 to XI, bundle and map them to one XML-file

Hi All,
We need to send IDoc's (DEBMAS06) from R/3 to XI and bundle and map them to a single xml-file. Please help us with your suggestions on how to proceed using a simple solution (probably need of BPM).
Regards,
Theo

Hi Theo,
there is an example in SAP Library: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm">Collecting and Bundling Messages - One Interface</a>. Plz post us your detailed quetions.
Regards,
Udo

Getting error code 37 while sending IDOC via WE19

Hello experts,
I am facing a very unlikely error which is preventing me from testing my scenario.
I dont have XI quality server and hence I am using my development server as both dev and quality. Hence I need to connect both dev and quality SAP R/3 system to my XI dev system. While I have done all the configurations in my XI and both SAP R/3 systems, its giving me error when i am trying to send IDOC from quality system.
In quality R/3 i have done the following:
1) Created RFC for my XI dev server
2) Created port for this RFC
3) Created partner profile adding all required IDOCS in the outbound parameters
4) Created distribution channel for all the idocs
In XI dev system i have done the following:
1) Created RFC for both dev and quality of R/3
2) Created port for both the RFCs
3) Maintained the IDOC metadata for both the ports
Now when I am pusing IDOC via dev of r/3 (we19) is working fine but when I am doing the same from quality of r/3 its giving me status code of idoc as 37 that says "An error was identified in the control record while adding an IDoc. The sender port SAPQTY_510 is invalid."
But I have created this sender port SAPQTY_510 in my XI dev system and have also maintained the idoc metadata. I dont know why this error is coming.
Can anyone please point out what mistake i have done or if i missed sometig as I am trying to connect 2 r/3 systems to one XI system.
Its really urgent hence your help will be highly apreciated.
Thanks,
Yash

hi yash,
where you created SAPQTY_510 ,it should be created in R/3 Quality RFC destinations.
In XI DEV create port like SAPxxx WHERE xxx is SID of quality system.
actually we are getting confused.
i guess you used same name SAPQTY_510 in quality R/3 and XI DEV .
In error it says sender port SAPQTY_510 is invalid mean port of Source not XI DEV(receiver).
just try to use some other name say SAPXXX_QUA and confirm the error.
when IDOC is sent to XI DEV ,port of XIDEV SAPQTY_510 has nothing to play any role .
just check whether rfc destination of sender port (QUALITY R/3)you used is of type 3.
so please check at which port error is coming.
Thanks & Regards,
Rama Krishna
Edited by: rama krishna talluri on Mar 5, 2008 10:02 AM

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

Help in IDoc to File scenario

Hi experts,
I just created a scenario to export IDoc to File on a FTP server through XI server. I think I configured all the necessary things, such as in SLD, in sender(ECC) and receiver (XI server), and in IR, ID. But although it sends IDoc to Port OK in sender system, in the receiver system, I cannot see anything. Pls help to find out something I missed.
Thanks in advance

HI,
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Troubleshooting File-to-IDOC Scenario in XI.
Troubleshooting File-to-IDOC Scenario in XI.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Thanks,
Madhu

Idoc to file scenaro ( sending IDOC as it is to NON-SAP)

Hi Experts,
I am doing idoc to file scenario.
I am having SAP R/3 system with 3 clients(100, 200 & 300), IDOC is comming from SAP R/3( any one of the client)
In this is scenario, I am sending IDOC-XML as it is to the NON-SAP system.
I heard that, i can do in 3 ways. those are
1. Without any repository objects: you can go ahead with No interface mechanism on the target side.
2. Without message type: create a message interface whose message type would be idoc itself
3. With message type: export the IDOC as xsd file and re import the xsd file as an external definition.
If i go without IR objects,Please tell me whether i need to create Interface objects(i.e. DT,MT & MI) & Mapping objects (MM & IM) or not for the reciever.
MY ASSUPTION:
step1: I will import the IDOC into IR.
step2: Directly i will go to the ID without desiging any object in IR ( is it ok).
Is my assuption or correct or not?, please tell me.
So please tell me the entire scenario how to achieve this.
Please help in this issue.

Hi Laxmi
1. Without any repository objects: you can go ahead with No interface mechanism on the target side.
-- Not Possible
2. Without message type: create a message interface whose message type would be idoc itself
-- No need for the Message Interface for IDOC. You will directly import the IDOC and do the Mapping
3. With message type: export the IDOC as xsd file and re import the xsd file as an external definition.
-- This is Possible. you are export the IDOC as XSD File and reimport the same. so there is no difference. If you are going to change the IDOC Structure then this is possible.
Here I am sending some links which are useful for IDOC to File Scenario. Please go thru the links given below..
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
IDoc-XI-File scenario
File -> IDOC ref:
File to IDOC
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope this answers your query.
Award the POINTS if it is useful **
Cheers
Vasu

Error in Sending IDoc to XI

Hi Gurus,
We are not being able to send Idocs from one of our Back-end SAP system. The Idoc status in we05 is successful but it doesn't reach XI. So we checked in SM58 in the Back-end R/3 system and there it shows the error:
No Service For System SAP*** , Client *** in Integration Directory
We tried almost every possible setup
-The System is defined in SLD and has the logical system name.
-The Adapter Specific Identifiers are correct for the corresponding business system in ID
-The RFC destination in R/3 system is defined.
- Read through other similar threads in SDN about the similar problem.
Do anyone have a more definite solution for this particular problem? The other R/3 systems are connected to XI system and all IDocs from those systems are arriving at XI.
Waiting for your valuable advices!
Regards,
Suddha

Hi All,
We had eventually found the solution to this problem we were facing in sending IDoc, though I couldn't manage to update the thread with the solution. I think this would be a very helpful information for those who face similar problems.
Let me describe the scenario first briefly,
We are sending an IDoc (Idoc extension), from SAP system to XI and then send the XML payload as mail attachment to the receiver via receiver mail adapter. Since this is a cross company transaction, hence we have configured the scenario as a B2B in ID, which means we use Parties for both the sender and receiver.
Now in the ID we had done all necessary configurations and used parties and services under Party. For the sender SAP system we assigned a Business System to Sender Partner, configured the Party Alternative Identifiers correctly. The ports were created in IDX1.
On the other hand the SAP system was also configured successfully - including Partner Profile, Distribution List, RFC destinations and ports.
In SLD we created Business System for the SAP system and in ID the Business System under party had the correct logical system name as Adapter Specific Identifiers.
But after all these, the IDoc was not arriving at XI, though in R/3 the status of the IDoc was 03 in we02. When we checked in sm58 in R/3, it showed us the error message that "No Service For System SAP*** , Client *** in Integration Directory".
The cause to this problem was:
We created (assigned from SLD) Business System only under Party (Sender), as this was a B2B scenario, and didn't create (assign) a Business System without Party, as we didn't need one at all in the scenario configuration. And this the reason behind this error. When an Idoc arrives at XI, before the Inbound IDoc adapter converts the IDoc to IDoc XML using IDoc metadata............it checks in Configuarion to see if any Service without Party (Busniess System) is defined for the Sender SAP System and Client (The SNDPOR and MANDT field values from IDoc Control header are taken as the SAP SID and Client). If it finds one it accepts the IDoc and starts the Normalization (Sender Party, Service......in the message header) and IDoc to XML conversion. If it cannot find an Service without Party in ID for sender system, it rejects the Idoc with the error message that we saw in sm58 in backend R/3 system.
In this step the Service under Party doesn't help, because at this point the Inbound IDoc adapter can not deterimine the sender party.
Hence for sending an IDoc from an SAP system to XI, we need to have an Service Without Party in ID, whether or not we require it in our actual Scenario Configuration, which is ofcourse not a case for the Reverse Scenario, ie Sending an IDoc into SAP system from XI.
This is the similar with BC adapter as well. I was already aware about this behaviour of BC adapter from my past experience and this actually helped to troubleshoot this IDoc adapter problem.
This was ofcourse a useful and new learning for me and hope would be helpful to others as well. Let me know if anyone has any doubts on this.
Regards,
Suddha
Edited by: Suddhasatta Guha on Aug 28, 2008 1:03 PM

Steps required for Sender IDOC adapter PI 7.0

Hi all,
My basis guy has installed SAP EHP1 for PI7.0 for handling the idoc packaging(sending idocs in packs)...
Please can any one let me know the further settings required in PI after it has been installed...
and even when i open the sender IDOC in comminication channel in ID i am able to see only 3 options
Transport prtocol, message protocol,Adapter engine...
But i am not able to see the other fields...
Can any one help me...
Thanks and Regards,
sridhar

Hi Michael,
Thanks for your reply..
I searched for the docs in many ways.. but couldnt find proper information regarding the IDOC packaging with sender IDOC adapter and steps required...
Could you please let me know if i can get the book in Singapore since our project, because almost 90% interfaces are related to IDOC...
And request you if you can share me the steps required in PI to confirgure IDOC packaging for EHP1...
Regards,
Sridhar Reddy
Edited by: sridhar reddy kondam on Jun 15, 2009 4:35 AM

Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN

We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI Team

Hello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
I find this in sap.help : 
Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris

Problems with sending IDocs into R/3 using BPM

Hi Vishnu,
as I have read the forum, you have experience with sending IDocs into R/3 from XI using the BPM.
Did you have problem, that this sending takes very long time?
My BPM splits the xml, sends IDoc into R/3 immediately, but the processing of the 2nd IDoc takes 6-10 minutes!
Do you have any idea, what could be wrong?
Thanx 4 answer, Peter

Vishnu, I was discussing this problem in another thread, but no helpful answer was sent, and I have read, that you have experience, so - just for explanation
Well,
yes, this situation is really strange.. New facts are:
when I send into XI XML, which is splitted in the BPM only into 1 IDoc, it is processed immediately. When I send there XML for 2 IDocs, the first is processed immediately, the 2nd starts immediately, but end of process is after 6-10 minutes, it depends... Then I tried to send there XML for 10 IDocs - and now attention please! 5 of them have been processed almost immediately, 5 of them after 8 minutes... The last test was with 16 items - 6 processed immediately, 10 after 10 minutes... And all these 10 minutes was my 4 processor XI box unavailable, with over 60% load... But finally the IDocs arrive!!
Any explanation???
This is really unbelievable situation!
Port name is SAPDEV, rfc destination DEVCLNT100
Actually, when I was creating the scenarion using the wizard and trying to add my communication channel(IDoc type) to receiver agreement, I got error - communication channel is not configured correctly, use another one. But somewhere I read, that I should create the receiver agreement manually. So I did.
To my BPM:
-receive MSG
-switch (but I'm testing only one branch now) - and the MSG message is always passed here, it's ok
-then I have transformation to MultiMSG (message with multiple DATA for multiple IDOCS)
-then comes the split mapping Multi2SingleMSG
-then ForEach Block with sending the Single MSG
this is the end of the BPM, and outside the BPM comes the mapping Single2IdocMSG and sending the IDoc into R/3
before I had the Single2Idoc mapping in the BPM, but thought, that this could be the bottleneck, so moved the mapping after the BPM... It didn't help...
So, what do you say?
Peter

Why do we require Receiver IDoc Adapter wen Sender IDoc Adapter is not req?

Hi All,
We require Receiver IDoc Adapter( if the receiving System is R/3 and uses IDoc) but when sending BS uses IDoc, Sender IDoc Adapter is not required since it resides in ABAP Stack. So, can anyone explain me as why do we need to configure Receiver IDoc adapter?

Hi,
Both the sender and receiver IDoc transmission is done by the RFC communication channel.
In case of the sender IDoc, partner profile configuration in the sender system will tell for a particular IDoc type which port should be used. This port will have the details of the RFC channel to be used to deliver the IDoc.
However, in case of SAP XI/PI system we don't configure partner profile and hence we need a way to tell which port & RFC destination should be used to deliver the IDoc and hence we define a receiver aggrement and adapter. This is just used as a reference at rutime and unlike the other adapter, this receiver IDoc adapter doe's not process any message over Adapter engine.
Hope this helps...!!!!
~SaNv...

How to Send Idoc Acknowledgements back to Http sender (Http to Idoc)

Hi
I have scenario: Http To Idoc
first requirment:
i need to map xml file come from HTTP Sender to Idoc (SAP system), and need to send Idoc acknowledgements/status back to Http sender.
second requirment:
while mapping COM Xml file come from Http to COMMAT04 idoc into SAP system i need to to check whether corresponding material already exist in R/3 or not, if material is not exist, process should be cancelled and alert should be raised. ( i mean to say before sending COMMAT04 idoc into SAP, corresponding material should be exist already, if not alert should be send to http sender)
please thrown some inputs, if sombody has already done with htis....
Thanks in Advance, and help would be appreciated..
Thanks and Regards
Rajesh Babu

Just providing the specifics that Suhail has intended.
How to handle IDOC Acknowledgements in XI.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
RFC Mapping Lookups:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 7, 2008 3:32 PM

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to save file in SAP fold

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

Assignment IDX1 port to sender idoc adapter ...

Hi gurus,
I have a big problem and I don't have any idea how to solve it. Please, help me.
I have a non-SAP system, regular SAP ERP and SAP XI and I need to transfer IDocs between them.
There is no problem to send IDoc from ERP to XI and forward it to non-SAP system. Unfortunatelly communication in opposite direction doesn't work. XI is not able to receive IDoc sent from non-SAP system because appropriate metadata can not be found in IDX2 cache.
In configuration of communication channel for sending IDocs to non-SAP (receiver idoc adapter) I selected IDX1 port that is directed to the ERP and it's worknig fine. I can send IDoc from XI to non-SAP.
But in configuration of communication channel for receiving IDocs from non-SAP (sender idoc adapter) is not possibility to determine any port. Does exist a way how to force sender idoc adapter to use some specific IDX1 port?
Thank you in advance for every reply!
Regards,
Zbynek

The IDocs are sent from non-SAP system by means of tRFC. Connection type of the RFC destination is type T (TCP/IP) and activation type is Registered Server Program.
If we sent the IDoc directly into SAP ERP (where the IDoc Type is known) everything is fine
Edited by: Zbynek Kabrt on May 19, 2009 8:59 PM

HELP Sending IDOC

Similar Messages

Maybe you are looking for