Help system doesn't work !

Hi there,
I am trying the Circuit Design Suite 13.0 and the help system doesn't work at all.
No help from
The main menu Help -> Multisim help F1
In all the dialogs with a Help button. Nothing happen if I click the Help button ?
I use Windows XP SP3 FRENCH and all the installtion went without any problems everything else is working perfectly.
I checked in the install program if I need to install the help system separately and didn't see anything.
Any ideas of what's goint on ?
Thank you, bye.

Hi Pierre,
Are you able to manually open the help file? Go to C:\Porgram files\National Instruments\Circuit Design Suite 13, the Multisim.chm file is the help file, double click on it and see if it will launch. If you the file opens and nothing is displayed, google 'unable to open .chm" file, there are lots of instructions how to fix it, here is an example:
http://www.thefinalguide.com/2009/07/unable-to-read-chm-files-on-xp-2003-vista/
Tien P.
National Instruments

Similar Messages

1os10.4.4....Help the Help still doesn't work

help...Help still doesn't work even after the update. any advice on how to help Help would be much appreciated. I did all the cache, preference steps and it still won't work.
????

hmmmm????

HP updated my BIOS and now the sound system doesn't work on Dv76012Tx.

HP Care / Support Assistant requested to update my BIOS, which I did. Computer restarted a couple of times then I found my sound system doesn't work. My computer is Dv7-6012Tx and it is just a week old. I now get no sound, and it had been working beautifully.
Please reset my BIOS back to how it was.

Had the same problem as of about 30 minutes ago. New BIOS update, sound doesn't work. Drivers all read as up-to-date. What the hell?

My Help Viewer doesn't work properly-The selected topic is currently unavailable Make sure you're connected to the Internet. For help connecting, choose Apple menu System Preferences, click Network, and click "Assist me." If you're connected to the Inte

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Transport to Consolidation system doesn't work

First of all, sorry if this is a silly question but I have to admin I am a little missed with NWDI. Every step we did we have a new error
In this case, we have trying to move a iView using NWDI and process to transport from
Development Environment to Consolidation doesn't work.
We have done all steps to deploy changes in Development and iview
has been updated correctly. But then, when we release the DC in NWDS
and go to Transport View - Consolidation tab and we do the import
althougth we have a successfully message with "Import Finished", the
iview has not been updated in Consolidation system .
We have doublechecked server, port and SDM password in Runtine System
tab for this server and everything is OK.
I have analyzed all logs generated during Import process in Transport
Studio and no error is showed.
I have find in CBS Consolidation builspace and we don't have any activities pending, and additionally the DC doesn't appear in this buildspace. However in Development buildspace it is.
Could somebody help us putting some ligth on it? Where can I to try to obtain log information about why this change is not moved to Consolidation?
Thanks in advance.

Hi Javier,
I have sometimes a similar problem: we are developing WebDynpro applications. The activities are checked in and transported correctly, but on the destination system only the old release shows up.
My solution of this situation is not elegant, but effective (steamroller tactics or in german "Holzhammermethode"):
- Log on to the console of the machine where your destination system for your deployment is running. Start up the (really slow) standalone SDM application and select the components, which are not updated correctly, for undeployment and undeploy them manually.
- After successful undeployment reimport the component/activity in the JDI transport studio again.
As mentioned before, not elegant, but effective. It worked for all the situations now, when the deployment did not work, but there was no obvious reason available.
Regards
Karsten

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

Delta in source system doesn't work

I've created delta-enabled generic datasource. The delta field is timestamp field. I've done Initial Delta run, posted couple new records with appropriate timestamps, tried to run delta but it doesn't work. Even on test delta run RSA3 in source system.
Why?

Hi Gediminas,
You need to maintain safety intervals(at least lower limit)
Check: [How tou2026 Create Generic Delta|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Hope it Helps
Srini

Help~~Apache doesn't work!!

I've just installed Oracle9i application server 1.0.2.2.2a with Oracle 8.1.7 on win2000.
But Appache doesn't work.
The error message is following...
No such file or directory: Config file wdbsvr.app inaccessible thru env var WV_GATEWAY_CFG
Because I'm a beginner I have no idea why it doesn't work.
Please help me....
Thanks in advance...
Brad

It is exactly what the error message says:
No such file or directory: Config file wdbsvr.app inaccessible thru env var WV_GATEWAY_CFG
this is how to fix:
1. Right click on 'My computer' > Properties > click on the 'Advanced' tab > click on 'Environmental Variables'.
2. Under System Variables, go to the last line 'WV_GATEWAY_CFG'
3. Your variable Value should be C:\ORACLE\iSuites\Apache\modplsql\cfg\wdbsvr.app
Make sure your drive letter and installation path are correct.
4. Restart your computer. Apache should work.
Good Luck.
I've just installed Oracle9i application server 1.0.2.2.2a with Oracle 8.1.7 on win2000.
But Appache doesn't work.
The error message is following...
No such file or directory: Config file wdbsvr.app inaccessible thru env var WV_GATEWAY_CFG
Because I'm a beginner I have no idea why it doesn't work.
Please help me....
Thanks in advance...
Brad

The iPad's hardware system doesn't work.

I have an iPad 2, which won in 2013 and today the hardware operating system this product is fail, as the screen freezes, it turns on and off alone, applications open and close alone. In 2014 and now the screen is just flashing with lime-green color, which does not allow display the menu or settings and neither Homepage and often shutting alone and can not reconnect the unit, by simply not ascend the operating system so effective.
I took the product back to the company OMNI Computer Apple Support Brazil in Curitiba -PR, and this gave the report that my warranty is quenched to receive a new product and that I receive a new iPad 2 I should pay the amount of R$ 990.00. However , the problem that clomplaint is not collateral or other , but that the Apple operating system does not work.
I contacted Apple support over the phone and was told that at the time he took to OMNI iPad, I still had 38 days of warranty.
Besides Apple and OMNI violate the Code of Consumer Protection , targeted to abuse my rights , ratify the information cited , I have had to date many annoyances, such as stress, mornings and weekends lost without resolutions .
Have I contacted the phone to Apple support again and many records there own links, ordered procedures to remedy this situation , the items were scored for solution : take the iPad for Assistance and restore it .
I performed the two steps, but nothing concrete had company OMNI and Apple, nor a constructive feedfack and that could solve everything without the need for other means of resolving facts .
Publish themselves.
Grateful.

Please just ask a question, we don't need a story about the history of the device. Explain the symptoms and maybe someone can help.
Based upon what I can understand from your post, try the standard troubleshooting...
1. Remove apps from the Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
2. Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
4. Restore with your backup.
5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it. You may need to try DFU mode (Google for it).
6. If still a problem, it's likely a hardware issue.

Smart value help autocomplete doesn't work

Hello,
We are using CRM 7.0. We want to provide an autocomplete option for some customer input field.
We decided to implement it with smart value help (F4) functionality. This customer field belongs to the customer Z view.
When we use this Z view in the Z component, autocomplete wotks fine but when we use it in the standard component, F4 popup help works but autocomplete (smart value help) doesn't work.
We would appreciate any help on this issue.
Thanks in advance,
Sergey

Your .zshrc is only read when you start a new shell: https://wiki.archlinux.org/index.php/Zs … tion_files

Help: Fax doesn't work now !

Hi guys,
Wonder if anyone can throw some light on this?
We just got a new phone system installed at work and apart from now having to dial 9 to get an outside line, things look fine.
At the same time, our office manager has installed a new version of FaxStf (Pro)
Now, after these two "updates" to our system, when we try to send a fax, a window appears which tells us it's "preparing Fax" - and that's where it stays.
I've checked the Driver, and we have "Fax print" in the printer setup pref's, and also I've just tried to re-install the application - but things are still the same!
I've tried repairing permissions, but no changes have occurred.
One note: When I did the install, the FaxStf printer appeared in the listing, but the Apply Button was greyed out - I had no chice but to use the generic Faxprint driver - is this normal?
Any help would be most appreciated.
Many thanks,
Steve

Hello Steve and Welcome to Apple Discussions.
I'm with K Shaffer on this one the use of a Mac a a fax machine is rare and on the occasions I've done it I use OS X's fax capabilities. Very few people on these boards will have sufficient experience to assist you. Try getting support from Smith Micro.
regards
mrtotes

Your help page doesn't work

Hi,
I got this message when I try to get skype number from Germany. We will use another skype account but now would like to get/use money we paid for the skype number we never got.
Skype Number unavailable
Unfortunately, our partner in Germany was unable to provide a Skype Number and your application has been unsuccessful.
There are several reasons why your application was unsuccessful:
1. There was an error in your application (if you think this was the case please update your details and reapply).
2. Our partner was unable to allocate a Skype Number in this instance.
We apologize for any inconvenience caused. To request a refund for this application please visit Skype Support.
Learn how to request a refund.
View your order details
unfortunately, your pages doesn't work, I couldn't make it by my self. Could you please help me with this issue. I just need skype credit which can be relocated to another skype account.
thank you,
Dragan

On which page is this?
Is that one of the snippets on the about:home page?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

The Flash Help Search doesn't work

Do I need to reinstall my flash ? I installed flash 8
professional on my machine about a month ago. i have just noticed
that the search button in the help section doesn't do anything.
what should i do?
All the help content is there but the only way i can find
help on the topic I need is by searching through all the books
which is obviously not very efficient.

I was having the same problem on one of my Macs. I resolved it by removing the two help preference files in my ~/Library/Preferences folder.
Kirk

NEED HELP ( sound doesn't work )

Hello, i such a problem:
i've bought a new computer P4 MSI motherboard whith OB sound card.
After installing windows,my speakers doesn't work.In hardware devices there are 3 quastion signs :
? other divices
? Ethernet controller
? multimedia controller
I tried to use update driver ( unistall and install too) but it didn't
solve the problem.
What can i do ?

Go into your BIOS settings .......Integrated Peripherals and "Enable":
1. On Board Audio Chip
2. AC 97 Audio ( whatever you have)
* Verify your speakers are connected to the correct audio outputs.
** If the above is ok..... you should be able to install your drivers in 'Device Manager' in conjuction with your MSI CD as stated earlier.

I can't print anymore, the "help" button doesn't work, and Firefox always sets to "Never Remember History" even if I change it

SO many issues with Firefox now! For one, it crashes quite a bit. I submit the crash report, and go from there. Keeps happening. But the main thing is this:
I go to "Options" and under "Privacy" it has "Never remember history" - I change it to "use custom settings for history", hit "ok" and then when I go back to it, it's back on "never remember history" already. What gives?
The issues I'm having right now is that I used to click on Print in my email (Yahoo) and pop-up blocker would stop it, but a dialog would pop up saying "try again", and I would hit that, and a separate window would open where I could print the email. Now, when I click on print, NOTHING happens. No box, no changes whatsoever. No pop-ups blocked, nothing at all. I mean, the button for "print" doesn't even react like I clicked on it. Nothing happens.
The other issue is that when there's a text box, if I start to type my email address, it suggests my email address. It never used to do this! I don't want this, either. How can I stop the suggesting of my email address. I don't want it to remember what I typed!
Another issue with Firefox is that when I click on the "menu" button in the top right, there's a question mark that says "open help menu" at the bottom. When I click on that, the help menu is EMPTY. I included a picture so you can see.
I've "reloaded Firefox", as well as downloaded another copy and actually reinstalled it. All these errors keep happening. How can I get them to stop or function correctly? What's causing them to work all wonky?

The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
*https://support.mozilla.org/kb/Private+Browsing

Help system doesn't work !

Similar Messages

Maybe you are looking for