HELP! users02.dbf file missing, database not starting

Hello,
I created a datafile via Enterprise Manager named users02.dbf for the wrong tablespace (SYSAUX instead of USERS); obviously this datafile was empty. When I realized my error I went and deleted the users02.dbf file from my file system and not from Enterprise Manager (I know.. stupid..)
The problem that I'm having now is that oracle will not start because it's missing this file, here is the error message:
SQL> SQL> ALTER DATABASE open
ERROR at line 1:
ORA-01113: file 5 needs media recovery
ORA-01110: data file 5:
'/var/backup2/oracle/product/10.2.0/Db_1/oradata/standard/users02.dbf'
I do not hav a backup because it was only a test file.
Which file do I have to modify in order to tell oracle startup NOT to look for users02.dbf ?
I really appreciate your help.
David

Paul, the last command gave me this error:
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
Thanks

Similar Messages

Oracle Database Not Starting Up Properly

On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. I kinda figured that I wouldn't run into the exact same issue on Oracle VM. I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still here. I didn't find anything in this forum about the database not starting up, so I'm wondering if others are running into the same problem and how to resolve the issue. Thanks a bunch for your help.

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Where can I get help re: a file missing from Pages in iCloud?

Where can I get help re: a file missing from Pages in iCloud?

If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents. If you use Time Machine or any other backup program on your computer, then try restoring the file(s). Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.

WHAT IF I DELETE THE SYSTEM06.DBF FILE FROM DATABASE /U01/DB/apps_ sid / system06.dbf and how to recover it in apps

WHAT IF I DELETE THE SYSTEM06.DBF FILE FROM DATABASE /U01/DB/apps_<sid>/ system06.dbf and how to recover it in apps

Hi,
First of all you must Open a ticket with oracle Support and explore the options
You can use this note to fix it:
RECOVERING FROM A LOST DATAFILE IN A UNDO TABLESPACE [ID 1013221.6]
If you is Unable to Drop Undo tablespace Since Undo Segment is in Needs Recovery
You can Upload the following trace file while opening the ticket
SQL>Alter session set tracefile_identifier='corrupt';
SQL>Alter system dump undo header "<new of undo segment in recover status>";
Go to udump
ls -lrt *corrupt*
Upload this trace file
Also upload the alert log fileRegards,
Levi Pereira
Edited by: Levi Pereira on Nov 29, 2011 1:58 PM

Connected to auxiliary database (not started)

Hello! I'm establishing Data Guard on Oracle 11g (x64). OS - CentOS 6.6 x86_x64.
The problem occurs when i'm trying to connect from my primary db to standby.
I expect:
connected to auxiliary database (not mounted)
but getting
not started
And when i'm trying to:
duplicate target database for standby nofilenamecheck dorecover;
I get an expected error:
Starting Duplicate Db at 17-MAR-15
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/17/2015 01:04:49
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
I also read simular topic:
Creating a duplicated database from active database
but i check several times my listener.ora on standby, and i can't figure out where the problem lies.
Actions that preceded the appearance of the error:
The main base is loaded by default (startup)
StandBy base loaded without mount (startup nomount)
On the main launch from the terminal «rman target /»
Command «connect auxiliary sys@orclstandby»
Password (sys)
Got: connected to auxiliary database (not started)
Here is my configuration files:
Primary:
tnsname:
orclprimary =
(DESCRIPTION =
   (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11centos.com)(PORT = 1521))
   (CONNECT_DATA =
   (SERVER = DEDICATED)
   (SERVICE_NAME = orcl.com)
orclstandby =
(DESCRIPTION =
   (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.115)(PORT = 1521))
   (CONNECT_DATA =
   (SERVER = DEDICATED)
   (SERVICE_NAME = orclstandby.com)
   (SID_NAME = orcl)
pfileORCL.ora
orcl.__db_cache_size=301989888
orcl.__java_pool_size=4194304
orcl.__large_pool_size=4194304
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=314572800
orcl.__sga_target=469762048
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=150994944
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain='com'
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=784334848
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
db_unique_name='orclprimary'
log_archive_config='dg_config=(orclprimary,orclstandby)'
log_archive_dest_1='SERVICE=orclstandby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=orclstandby'
log_archive_dest_2='LOCATION=/u01/app/oracle/oradata/orcl/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclprimary'
log_archive_dest_state_1=ENABLE
log_archive_dest_state_2=ENABLE
fal_client='orclprimary'
fal_server='orclstandby'
standby_file_management='AUTO'
StandBy
tnsname
orclstandby =
(DESCRIPTION =
   (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11standby2centos.com)(PORT = 1521))
   (CONNECT_DATA =
   (SERVER = DEDICATED)
(SERVICE_NAME = orclstandby.com)
orclprimary =
(DESCRIPTION =
   (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.101)(PORT = 1521))
   (CONNECT_DATA =
   (SERVER = DEDICATED)
(SERVICE_NAME = orcl.com)
listener
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
   (GLOBAL_DBNAME = orclstandby.com)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1/)
(SID_NAME = orcl)
LISTENER =
(DESCRIPTION_LIST =
   (DESCRIPTION =
   (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
   (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11standby2centos.com)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
pfileORCL.ora
orcl.__db_cache_size=301989888
orcl.__java_pool_size=4194304
orcl.__large_pool_size=4194304
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=314572800
orcl.__sga_target=469762048
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=150994944
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain='com'
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=784334848
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
db_unique_name='orclstandby'
log_archive_config='dg_config=(orclprimary,orclstandby)'
log_archive_dest_1='SERVICE=orclstandby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=orclprimary'
log_archive_dest_2='LOCATION=/u01/app/oracle/oradata/orcl/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstandby'
log_archive_dest_state_1=ENABLE
log_archive_dest_state_2=ENABLE
fal_client='orclstandby'
fal_server='orclprimary'
standby_file_management='AUTO'
Where I did wrong?

Thanks for the quick reply!
Primary:
sqlplus sys/<password>@orclstandby as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:01:29 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
sqlplus sys/<password>@orclprimary as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:28:21 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Standby
sqlplus sys/<password>@orclstandby as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:08:37 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
sqlplus sys/<password>@orclprimary as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:10:22 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

RMAN saying database not started??

Hi there,
If I log into my database through OEM, it connects fine.
Through Unix, I set my SID and type in:
rman target /
It connects me to rman but says: connected to target database (not started)
I then try and run a crosscheck archivelog all and it says this:
Erro message stack....
failure of crosscheck command
automatic channel allocation initialization failed
could not obtain a fully authorized session
ORACLE not available
shared memory realm does not exist
Linux Error: No such file or directory.
Any thoughta on what is going on here?
Thanks in advance!

herb:oradbp2 ~$ id
uid=500(herb) gid=501(dba) groups=501(dba)
herb:oradbp2 ~$ env | sort
_=/bin/env
DISPLAY=oradbp2.lilydale:33
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/herb
HOSTNAME=oradbp2.lilydale
INPUTRC=/etc/inputrc
KDEDIR=/usr
LANG=en_US
LD_ASSUME_KERNEL=2.4.19
LD_LIBRARY_PATH=:/d01/app/oracle/9ise/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=herb
LS_COLORS=no=00:fi=00:di=00;33:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/herb
ORACLE_BASE=/d01/app/oracle
ORACLE_HOME=/d01/app/oracle/9ise
ORACLE_SID=LSDB
PATH=/d01/app/oracle/9ise/bin:/d01/app/oracle/9ise/OPatch:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/herb/bin
PWD=/home/herb
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=::ffff:10.1.6.200 50766 22
SSH_CONNECTION=::ffff:10.1.6.200 50766 ::ffff:10.1.0.193 22
SSH_TTY=/dev/pts/1
TERM=xterm
USER=herb
herb:oradbp2 ~$ ps -ef | grep -i pmon
herb 1934 1 0 2010 ? 00:02:32 ora_pmon_lsdb
herb 3984 3359 0 11:06 pts/1 00:00:00 grep -i pmon
herb:oradbp2 ~$ ls -l $ORACLE_HOME/dbs
total 18960
lrwxrwxrwx 1 herb dba 53 Dec 4 2008 initanalyzer.ora -> /d01/app/oracle/admin/analyzer/pfile/initanalyzer.ora
lrwxrwxrwx 1 herb dba 49 Nov 12 2008 initcit1p1.ora -> /d01/app/oracle/admin/cit1p1/pfile/initcit1p1.ora
lrwxrwxrwx 1 herb dba 45 Oct 25 2008 initlsdb.ora -> /d01/app/oracle/admin/lsdb/pfile/initlsdb.ora
lrwxrwxrwx 1 herb dba 45 Nov 22 2008 initpvsp.ora -> /d01/app/oracle/admin/pvsp/pfile/initpvsp.ora
lrwxrwxrwx 1 herb dba 43 Nov 12 2008 initrep.ora -> /d01/app/oracle/admin/rep/pfile/initrep.ora
-rw-rw---- 1 herb dba 24 Dec 13 2008 lkANALYZER
-rw-rw---- 1 herb dba 24 Dec 12 2008 lkCIT1P1
-rw-rw---- 1 herb dba 24 Dec 9 2008 lkKRON43
-rw-rw---- 1 herb dba 24 May 18 2010 lkLSDB
-rw-rw---- 1 herb dba 24 Dec 13 2008 lkPVSP
-rw-rw---- 1 herb dba 24 Dec 12 2008 lkREP
-rwSr----- 1 herb dba 2048 Dec 4 2008 orapwanalyzer
-rwSr----- 1 herb dba 2048 Nov 12 2008 orapwcit1p1
-rwSr----- 1 herb dba 2048 Nov 25 2008 orapwkron43
-rwSr----- 1 herb dba 1536 Oct 25 2008 orapwlsdb
-rwSr----- 1 herb dba 2048 Nov 22 2008 orapwpvsp
-rwSr----- 1 herb dba 2048 Nov 12 2008 orapwrep
-rw-rw---- 1 herb dba 4718592 Mar 10 2009 p1k9ipga_1_1
-rw-rw---- 1 herb dba 1630208 Dec 12 2008 snapcf_analyzer.f
-rw-rw---- 1 herb dba 1630208 Dec 11 2008 snapcf_cit1p1.f
-rw-rw---- 1 herb dba 1679360 Dec 9 2008 snapcf_kron43.f
-rw-rw---- 1 herb dba 6397952 Jan 16 18:27 snapcf_lsdb.f
-rw-rw---- 1 herb dba 1630208 Dec 12 2008 snapcf_pvsp.f
-rw-rw---- 1 herb dba 1630208 Dec 11 2008 snapcf_rep.f
-rw-rw---- 1 herb dba 2560 Oct 25 2008 spfilelsdb.ora.bak

Database not starting,REDO log file error?

My DB was working fine uptill last evening, when i restarted it for some DB task it showed me an error ..
ORA-00333: redo log read error block 57346 count 8192
I studied the alert log file & related trace file .... but could not conclude what to do ?? Can any one suggest me what could be the solution...
ORACLE 10g R2
Windows 2003 Server
Database in NOARCHIVELOG mode.
I don't have the recent backup.The one i have is 20 days old.
Alert Log file contents : -
Wed Jun 02 20:22:19 2010
Aborting crash recovery due to error 333
Wed Jun 02 20:22:19 2010
Errors in file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc:
ORA-00333: redo log read error block 57346 count 8192
ORA-333 signalled during: ALTER DATABASE OPEN...
Wed Jun 02 20:37:15 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Jun 02 20:43:53 2010
Shutting down instance: further logons disabled
Wed Jun 02 20:43:53 2010
Stopping background process CJQ0
Wed Jun 02 20:43:54 2010
Stopping background process MMNL
Wed Jun 02 20:43:55 2010
Stopping background process MMON
Wed Jun 02 20:43:56 2010
Shutting down instance (immediate)
License high water mark = 3
Wed Jun 02 20:43:56 2010
Stopping Job queue slave processes
Wed Jun 02 20:43:56 2010
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Wed Jun 02 20:43:58 2010
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Wed Jun 02 20:43:58 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Trace file to read ora10g_ora_140.trc:-
Dump file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc
Wed Jun 02 20:22:18 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows Server 2003 Version V5.2 Service Pack 1
CPU                 : 2 - type 586, 1 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:3527M/4094M, Ph+PgF:4386M/5973M, VA:800M/2047M
Instance name: ora10g
Redo thread mounted by this instance: 1
Oracle process number: 15
Windows thread id: 140, image: ORACLE.EXE (SHAD)
*** SERVICE NAME:() 2010-06-02 20:22:18.406
*** SESSION ID:(159.3) 2010-06-02 20:22:18.406
Successfully allocated 2 recovery slaves
Using 545 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 14261, block 2, scn 86974094
cache-low rba: logseq 14260, block 4023
    on-disk rba: logseq 14262, block 3758, scn 86978396
start recovery at logseq 14261, block 2, scn 86974094
ORA-00333: redo log read error block 57346 count 8192
ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00333: redo log read error block 57346 count 8192
ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00333: redo log read error block 57346 count 8192
*** 2010-06-02 20:43:58.812
*** 2010-06-02 20:43:58.812 60680 kcrr.c
ARCH: Archival disabled due to shutdown: 1089
*** 2010-06-02 20:43:59.812 60680 kcrr.c
ARCH: Archival disabled due to shutdown: 1089

Hi,Aman this(following) may is not good way for opening database,but OP can try and open own database:
@ DBA4 you will see from following example how you can open your database.In your online log files was corrupted,therefore you have to do following step by step then you database will open.
SQL> alter database clear unarchived logfile group 2;
alter database clear unarchived logfile group 2
ERROR at line 1:
ORA-01624: log 2 needed for crash recovery of instance p (thread 1)
ORA-00312: online log 2 thread 1:
'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG'
SQL> alter database backup controlfile to trace as 'D:\oracle\product\10.2.0\ora
data\P\c.txt';
Database altered.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 125829120 bytes
Fixed Size                  1288100 bytes
Variable Size              75499612 bytes
Database Buffers           41943040 bytes
Redo Buffers                7098368 bytes
SQL> CREATE CONTROLFILE REUSE DATABASE "P" RESETLOGS   ARCHIVELOG
2      MAXLOGFILES 16
3      MAXLOGMEMBERS 3
4      MAXDATAFILES 100
5      MAXINSTANCES 8
6      MAXLOGHISTORY 292
7 LOGFILE
8    GROUP 1 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO01.LOG' SIZE 50M,
9    GROUP 2 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG' SIZE 50M,
10    GROUP 3 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO03.LOG' SIZE 50M
11 DATAFILE
12    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF',
13    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\UNDOTBS01.DBF',
14    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSAUX01.DBF',
15    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\USERS01.DBF',
16    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TS_TEST.ORA',
17    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST.ORA',
18    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST1.ORA'
19 CHARACTER SET WE8MSWIN1252;
Control file created.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
%U_.ARC
ORA-00280: change 2032832 for thread 1 is in sequence #87
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
ORA-01112: media recovery not started
then add *_allow_resetlogs_corruption=true* in pfile then startup database with pfile as
SQL> startup mount pfile=D:\oracle\product\10.2.0\admin\P\pfile\init.ora.pr
ORACLE instance started.
Total System Global Area 125829120 bytes
Fixed Size                  1288100 bytes
Variable Size              62916700 bytes
Database Buffers           54525952 bytes
Redo Buffers                7098368 bytes
Database mounted.
SQL> recover;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
%U_.ARC
ORA-00280: change 2032832 for thread 1 is in sequence #87
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
ORA-01112: media recovery not started
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Database altered.
SQL>finally remove allowresetlogs_corruption=true parameter from pfile.

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

VDI 3.0 installation problems - VDI database not starting

Hi
I am trying to install VDI 3.0 (released yesterday) on a Sun Fire X2200 server, running Solaris 10u6. The package installation runs just fine, but I can't get VDI configured properly. When running the vdi-config program, I choose to set up a evaluation VDI host, and then everything runs fine until it reaches the "Starting Sun VDI database (MySQL)" point. It hangs there for a couple of minutes, before simply stating "Failed". The configuration program also prints out the following in the end of the run:
Common Agent Container Configuration
   + Restarting Common Agent Container service...
Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
Please check the SMF log file for more information: [/var/svc/log/application-management-common-agent-container-1:default.log].This seems to be because the common-agent-container-1 service depends on vdadb:sql running, which it fails to.
If I try to start vdadb:sql manually after the configuration (using svcadm clear vdadb:sql), the following is put into the services log, and the service is still in maintenance mode:
[ Mar 25 15:16:19 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
   MGMT_NODE=[1]; NDBD_NODE=[1]; SQL_NODE=[1]; MULTI_HOST_MODE=[0];
   NDBD_CONNECTSTRING=[localhost]; NDBD_INITIAL_ARG=[--initial]; NDBD_NODE_ID=[2];
Starting the Sun Virtual Desktop Infrastructure Database service:
   - Starting Management Node... OK
   - Starting Data Node...
     Arguments: [localhost --initial]...
     Error
[ Mar 25 15:21:26 Method "start" exited with status 95 ]I can't seem to get any further debug messages, and I can't find out how to go any further with this, as "Failed" and "Error" seems to be the only error messages I get.
As far as I can see, the error message is coming from the "waitForNdbdNodeStartup" function on line 296 of /opt/SUNWvda/lib/vda-db-service, but I can't really get any nearer than that.
Does anybody know how to get further in this regard?
/Jeppe

Hi, I have been reading and trying the solutions on this post to no avail ... as this post is still open and it seems like the subject still applies to my problem, I am using this one... the case is:
I am trying to setup an evaluation for vdi3 using several machines, 1 for the vdi core, 2 for the secondaries and another one as the storage server. the main and one secondary installed and got configured fine, but the second secondary is failing and I dont know why, I just unconfigured and uninstalled it and did reinstalled and reconfigured it again, but something went wrong, I havent
touched anything except changing the 300 to 16 in the ini file ...
bash-3.00# /opt/SUNWvda/sbin/vda-config
Sun Virtual Desktop Infrastructure 3.0 Configuration
An Evaluation Sun VDI Host configures all necessary components on one server.
1 Primary Sun VDI Host
2 Secondary Sun VDI Host
0 Evaluation Sun VDI Host
Select (1/2/0): 2
Specify the maximum number of concurrent sessions this host will support [100]: 20
There are as many local users created as the maximum number of concurrent sessions defined.
Enter the user ID range start [150000]: 20000
Enter the DNS name of the primary host: holanda
Enter the DNS name of this host [ghana]:
You can use the MySQL database of the Sun VDI cluster or connect to a remote MySQL database.
1 Sun VDI cluster database
2 Remote database
Select ([1]/2):
Do you want to apply the settings? ([y]/n)
Sun Ray Server Software Configuration
+ Providing configuration data...
+ Loading Sun Ray data store...
+ Populating Sun Ray data store...
+ Creating Sun Ray core services configuration...
+ Restarting Sun Ray data store daemon...
+ Configuring Sun Ray Server Software Web Administration...
+ Adding 20 user accounts for Sun Ray sessions...
Sun Ray Client Configuration
+ Enabling Kiosk Mode Policy for All Card and Non-Card Users...
+ Enabling LAN Connections...
+ Configuring Sun Ray Connector for Windows Operating Systems...
+ Restarting Sun Ray Server Software...
MySQL Database Configuration
+ Creating MySQL group (vdadb)...
+ Creating MySQL user (vdadb)...
+ Setting up MySQL directory...
+ Setting up MySQL cluster directory...
+ Initializing database...
+ Starting Sun VDI database (MySQL)...
Failed.
+ Synchronizing time...
Sun VDI Web Administration Configuration
+ Enabling Sun VDI web administration...
+ Restarting Sun VDI web administration...
RDP Broker Configuration
+ Starting RDP broker...
Common Agent Container Configuration
+ Restarting Common Agent Container service...
Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
Please check the SMF log file for more information: [var/svc/log/application-management-common-agent-container-1:default.log].
The configuration of Sun VDI 3.0 has completed.
A log file is available at '/var/adm/log/vda-config.2009_04_13_09:00:44.log'.
The command line tools are located at '/opt/SUNWvda/sbin'.
You can access the Sun VDI web administration at http://ghana:1800
the log shows:
bash-3.00# tail -30 /var/svc/log/application-database-vdadb:core.log
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[holanda]; NDBD_INITIAL_ARG=[--initial]; NDBD_NODE_ID=[2];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node... 2009-04-13 08:37:47 [ndbd] INFO -- Unable to alloc node id
2009-04-13 08:37:47 [ndbd] INFO -- Error : Could not alloc node id at holanda port 1186: No free node id found for ndbd(NDB).
error=2350
2009-04-13 08:37:47 [ndbd] INFO -- Error handler restarting system
2009-04-13 08:37:47 [ndbd] INFO -- Error handler shutdown completed - exiting
sphase=0
exit=-1
Arguments: [holanda --initial ]...
Error (255)
[ Apr 13 08:37:47 Method "start" exited with status 95 ]
[ Apr 13 09:04:02 Disabled. ]
[ Apr 13 09:04:02 Rereading configuration. ]
[ Apr 13 09:04:02 Rereading configuration. ]
[ Apr 13 09:04:03 Rereading configuration. ]
[ Apr 13 09:04:03 Enabled. ]
[ Apr 13 09:04:03 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[holanda]; NDBD_INITIAL_ARG=[--initial]; NDBD_NODE_ID=[2];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node...
Arguments: [holanda --initial ]...
Error
[ Apr 13 09:11:33 Method "start" exited with status 95 ]
bash-3.00#
bash-3.00# svcs -l svc:/application/database/vdadb:corefmri svc:/application/database/vdadb:core
name SUNWvda MySQL Cluster and Application
enabled true
state maintenance
next_state none
state_time Mon Apr 13 09:11:33 2009
logfile /var/svc/log/application-database-vdadb:core.log
restarter svc:/system/svc/restarter:default
contract_id
dependency require_all/none svc:/milestone/network:default (online)
dependency require_all/none svc:/system/filesystem/local:default (online)
dependency require_all/refresh svc:/milestone/name-services (online)
bash-3.00# svcs -a|grep vda
legacy_run 8:58:36 lrc:/etc/rc3_d/S99vda-webadmin-init
disabled 9:04:02 svc:/application/database/vdadb:sql
maintenance 9:11:33 svc:/application/database/vdadb:core
bash-3.00# cacaoadm status
default instance is ENABLED at system startup.
default instance is not running.
bash-3.00# /opt/SUNWvda/sbin/vda-db-status
Node Type IP/HostName Id Status
Management node holanda 1 up
Data node ghana 2 down
Data node paraguay 3 up
as I said, the only thing I changed is the value for the redo files, as suggested in one of the replies above.
This is the second time I uninstall/unconfigure this server and start over (config/install)
this is a newly installed Sol10 U6 system:
bash-3.00# uname -a
SunOS ghana 5.10 Generic_138889-03 i86pc i386 i86pc
bash-3.00# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 8064 Megabytes
System Peripherals (Software Nodes):
bash-3.00# prtdiag | head -10
System Configuration: Sun Microsystems Sun Fire X4100 Server
BIOS Configuration: American Megatrends Inc. 080010 01/31/2006
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
AMD Opteron(tm) Processor 254 H0
AMD Opteron(tm) Processor 254 H1
bash-3.00# swap -s
total: 876688k bytes allocated + 405180k reserved = 1281868k used, 8752988k available
help is appreciated.

Database not start with srvctl command in rac 10g

hi
when i change parameter in sqlnet file
SQLNET.AUTHENTICATION_SERVICES= (NTS) to SQLNET.AUTHENTICATION_SERVICES= (NONE)
then database is not started with srvctl utillity but started with sqlplus enviroment.
please help in this issue

user521214 wrote:
hi,
we are implementing security policy for our client. our databas is on RAC . As per the security, we need to revoke sys dba priviliges. when i used SQLNET.AUTHENTICATION_SERVICES=(NTS) in sqlnet.ora or SQLNET.AUTHENTICATION_SERVICES=(NONE). the instance not start with the following command in rac 10g.
$srvctl start database -d abc
$ crs_stat -t
Name Type Target State Host
ora.db.db application OFFLINE OFFLINE
ora....b1.inst application ONLINE OFFLINE hosttest01
Edited by: user521214 on Apr 21, 2011 4:08 AMIs this the only parameter you changed? What happens when you undo this modification?
What do you see on log files?

Oracle 9i database not starting

Dear all,
need ur help. i have installed oracle9i on wndows xp. then i stoped all the services for 9i. n i installed oracle 10g also.
My problem is that bothy database servies are their and they are automatic.
10 g Database is starting automatically. but 9i database instance is not opeing automatically.
i tried STARTTYPE the opetion of oradim also but its not working.
tell me how to start the 9i database automatically.
regds
Ashish

most likely while installation you might have given a different port no.As a result oracle has ultimately landed up with having more than one listener.And some times I have seen after installation the previous listener does not get started.So I would like to you to check your listener.
One more point while 2nd installtion you might have changed your oracle home.so while trying to connect to prev instance try using sqlplus from previous oracle_home\bin\.

HWS file error when not starting with Ch 0

Hello,
I used the "niScope EX Save to File - HWS Low Level - Single Channel Stream.vi" as my starting point and added 8 channels for a 5105 card. Although this is a complex Queue-based vi, it works fine as long as my RAID is fast enough.
However, we have need to take data from channels 4 to 7 and not start with Ch 0. When I do this, my LabVIEW HWS reader does not see any data, nor does the MATLAB code I have written to read our HWS files.
Looking at the file in HDFView, I see that the data starts in vector0 and not vector1, as when I record Channels 0 to 3.
Perhaps I need to use the HDF5 LabVIEW code to force the writing to a different location in the HDF file?
Thanks for your help.

Hello,
I was out of the office Mon. and Tues. I took out a section that just collects one 5105 card in a steaming, continuous collect mode. This is part of a much bigger VI and I included the “Helper Aps” folder that has all the sub-VIs for that larger app. There are more sub-VIs than you need for “5105 Cont Collect.vi”, but it should run once you tell it where the sub-VIs are. Included is a quick-look reader I use to look at the data.
The data file Ch_0_to_3_5105-0.hws can be read, but the Ch_4_to_7_5105-0.hws file cannot.
Thank you for your help.
Attachments:
5105_Cont_Collect.zip ‏3267 KB

Oracle Database not starting ORA-01034: ORACLE not available and ORA-27101

Dear Sir,
today i have restarted the database server (11gR2) after that database service is not starting, the error message is
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0

[oracle@bladb ~]$ export $ORACLE_HOME
-bash: export: `/oracle/product/11.2.0/dbhome_1': not a valid identifier
[oracle@bladb ~]$ sqlplus sys/manager as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 17:46:28 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
[oracle@bladb ~]$ tail -20 /oracle/product/11.2.0/dbhome_1/startup.log
SQL> Connected to an idle instance.
SQL> ORA-00845: MEMORY_TARGET not supported on this system
SQL> Disconnected
/oracle/product/11.2.0/dbhome_1/bin/dbstart: Database instance "bladb" warm started.
/oracle/product/11.2.0/dbhome_1/bin/dbstart: Starting up database "bladb"
Fri May 3 17:40:24 IST 2013
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 17:40:24 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORA-00845: MEMORY_TARGET not supported on this system
SQL> Disconnected
/oracle/product/11.2.0/dbhome_1/bin/dbstart: Database instance "bladb" warm started.

Help: startup-config file open failed (Not enough space)

Who can help me ? I've an uc500 and he stil running. Now i want to change something and want to save the configuration first. But the following message appears : startup-config file open failed (Not enough space)
this is the output from a dir flash:
Directory of nvram:/
227 -rw-       25897                    <no date> startup-config
228 ----        1933                    <no date> private-config
229 -rw-       25897                    <no date> underlying-config
    1 ----          83                    <no date> persistent-data
    2 -rw-           0                    <no date> ifIndex-table
    3 -rw-         577                    <no date> IOS-Self-Sig#1.cer
    4 -rw-         615                    <no date> IOS-Self-Sig#2.cer
    5 -rw-         660                    <no date> vlan.dat
    6 -rw-         107                    <no date> cca.xml
    7 -rw-         586                    <no date> IOS-Self-Sig#3.cer
262144 bytes total (227094 bytes free)

OK.
Try this:
conf t
service compress-config
And see if that helps.
If not, see if you can tftp the running config off the router and TFTP it back to startup-config:
copy run tftp
copy tftp start
Then you can try a reload and see if it is cured.
I googled and found a few cases where alot of ACLs or NAT rules could cause MALOC errors (you would see those in your logs) when implemented and could manifest itself in this condition, which could be cured after the next reload, which is why I suggested that.
Of course, dont be remote when you do this and only do it during a maintenance window.
Steve

Database not starting automatically

OS windows 2000 server
database 8i
I have changed sid of database successfully and manually database is opening up but it is not starting up automatically with machine startup.

While changing SID of database I have deleted the service and recreated it with
ORADIM utility .
-startmode a
I have even edited the service but of no use .database is not starting up .
As I have mentioned above oracle service has been started successfully and it is running in auto mode.
One more problem I am facing after change of SID ,I can to database with user sys
but when I am trying to connect as normal user I am getting error:
ORA-03113: end-of-file on communication channel

HELP! users02.dbf file missing, database not starting

Similar Messages

Maybe you are looking for