Help!? wierd sqlnet problem with linux 8.0.5

I installed Oracle for Linux 8.0.5 on RHL 6.0
and also applied the glibc patches. Database
is up and running... and my pc clients can connect
to the database...
So my problem is:
I can connect to the local linux database just fine but,
I'm having problems using sqlplus to connect to another database.
For example, suppose I am in sqlplus and do:
connect scott/[email protected]
(assume prod.world is a 7.3.4 database on a separate machine and
the listener and everything is fine)
I get: ORA-01017:invalid username/password; logon denied
The username/password is valid because...
If I use svrmgrl to connect to prod.world:
and do a connect scott/[email protected]
It connects!
tnsping test.world and prod.world and I get ok... so I know that
the /network/admin/tnsnames.ora is okay... especially since it
connects with svrmgrl...!?
Any ideas anyone???
Thanks in advance...
Phil Adams
null

Phil,
I would be suspicious of the svrmgrl connect , I have tested
this myself and found that it ignores the "@sqlnet-alias" string
completely ! I suspect that the user scott exists in both the
local and remote databases and that remote scott has a different
passwd from the local scott !
One way to convince yourself of this :
1 create a user in the remore database
2 ensure that there is no user of the same name in the local
database
3 try your test again with this user
Cheers
Mark
null

Similar Messages

  • HEAVY Problems with Linux x86_64 on K8T Neo

    Hello, Community!
    I experience *HEAVY* Problems with Linux on my MSI K8T Neo (FSR). Since the customer support of the german dependancy seems to ignore my call for help I'm in good hope that maybe you can help me out or give me some useful advise.
    First some Hardware Specs of my system:
    MSI K8T Neo FSR, Rev 1.1, BIOS 1.5
    AMD Athlon 64 3000+
    3x 512MB Kingston DDR400
    Enermax EG365P-VE (350W) PSU (3.3V/5V 185W Combinded)
    MSI GeForce FX5200 TDR 128
    Adaptec ATA RAID AAR1200A (HPT370A) in PCI Slot 3
    Hauppauge WinTV PCI in PCI Slot 5
    Maxtor 4K040H2 (40GB) as Primary Master
    JLMS XJ-HD166S DVD-ROM as Primary Slave
    LiteOn LDW-411S DVD+/-RW as Secondary Master
    LiteOn LTR-52327S CD-RW as Secondary Slave
    2x Maxtor 6Y060L0 (60GB) on HPT370A as Primary Master/Slave
    Seagate ST380020A (80GB) on HPT370A as Secondary Master
    Maxtor 32049U3 on HPT370A as Secondary Slave
    KeyTronic KT2001 USB Keyboard
    Microsoft Optical Wheel Mouse Blue USB
    I've downloaded Fedora Core 1 x86_64 as well as the lately released Fedora Core 2 test 3 x86_64 distribution. Both CD sets have been burnt ok.
    If I try to install Core 1 x86_64 (Kernel 2.4.22-1.2179) the kernel crashes with a "attempted to kill idle task" panic. As far as I've learned the workaround is to give idle=poll as kernel parameter. This resolves the kernel panic, but the installer randomly crashes with segfaults at a random stage; sometimes while loading anaconda, sometimes during package install.
    If I try to install Core2 test 3 x86_64 (Kernel 2.6.5) I get a, completely new, error message while the kernel does the PCI Scan:
    ******* Your BIOS seems to not contain a fix for K8 errata #93
    ******* Working around it, but it may cause SEGVs or burn power
    ******* Please consider a BIOS update
    ******* Disabling USB legacy in the BIOS may also help
    I removed my USB keyboard, connected a PS/2 keyboard, disabled to USB Legacy option (I need it enabled in order to use Ghost) in the BIOS and booted again.
    The error message is gone now, but as in Core 1 the installer still crashes randomly with segfaults. I'm still unable to go all the way through the installation routine.
    I even tried to install Fedora Core 1 "i386": again there are segfaults during install.
    Contrary to the problems I experience while trying to install Linux my Windows XP (32-Bit), as well as a test installation of Windows XP 64-Bit, run like a charm without any problems. Strange but true.
    Since I already read trough several posts in this forum I already tried running my system with memory sticks from another manufacturers as well as with a more powerful PSU. I even removed my tv-card and raid-controller.
    Nogo - Linux still crashes randomly and Windows still works without any flaws.
    Has anyone a clue what I can/must do to successfully install Linux?
    Might it be that the BIOS has some flaws that might cause the problems?
    Has anyone managed to install Linux (what distribution) on this Mainboard?
    I would greatly appreciate any help. If you need to know something I haven't provided here please feel free to ask. I'll answer ASAP.
    Thank you in advance.
    P.S.: The system is *NOT* overclocked in any way.

    And now even the last problem is solved ...
    Since I was successful in installing a basic Gentoo system but still failed to install Fedora I reflashed BIOS 1.5. This time I cleared the CMOS by unplugging the PSU, setting the jumper and removing the backup battery.
    Yesterday I only flashed it with the /a switch, which should have cleared the CMOS as well - so far for the theory. However, it once went fine as I upgraded from BIOS 1.1 to 1.4.
    After setting up the BIOS options again I gave it another try and booted from Fedora (Core 2 test 3) install CD: No more complains about the CPU errata, although USB legacy is enabled, and I even went through the installation without any problems.
    It seems as I will stick with Gentoo as my primary distribution since the kernel makes a more "mature" impression than the one from Fedora (i.e. the K8 PowerNOW! Driver seems to be missing in Fedora's Kernel 2.6.5).
    By using an spare Athlon XP Mainboard I worked out that only one of my three Kingston memory sticks had errors - I'm going to replace the faulty stick tomorrow.
    Now for the conclusio:
    Thanks, especially you JLP, for helping me with my issue. Without the advise to use Gentoo, and the included MemTest86, I wouldn't have been able to track down the error to a faulty memory stick that fast since Windows always ran fine.

  • Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

    hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

    iPhone: Transferring information from your current iPhone to a new iPhone

  • Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • Problem with linux installation on Thinkpad T410i

    Hello everyone. I have a problem with an installation of Linux (Debian). Installation ended in my Thinkpad T410i, but when you are starting, the computer constantly restarts. With windows does not happen. What's the problem?
    Probe with two versions: one with and one without GUI, and always restarts during startup stage or just finish loading the operating system. If eligo Windows in GRUB, the pc works normally.
    I appreciate any help you can give me.

    Madhukar,
    Check the below forums which also discuss about same problem like yours.
    Trouble with SAP system installation GUI
    error in installation of solution manager
    Regards,
    Debasis.

  • Tecra S2: Problems with Linux Live CDs after BIOS upgrade

    Hi all,
    a short while ago I flashed the BIOS of my Tecra S2. My current BIOS version now is 2.80. Unfortunately no I have got problems with booting Linux Live CDs like Knoppix or Kanotix. The boot process freezes, when the PCMCIA module is tried bo be started.
    What i want to do now is to downgrade my BIOS version. Does anyone know how that stuff works and does anyone have an old BIOS version from 2005? I couldn`t found older versions on the Toshiba support sites.
    Thanks for all answers!
    biberkopf

    Youre right. On the Toshiba page you will find only the newest version of the BIOS and the older versions are not available on the page.
    In my opinion if you want to downgrade the BIOS you have to ask the authorized service provider in your country for the help.
    But did you check this useful site:
    http://newsletter.toshiba-tro.de/main/
    There you can check the area machine installation help
    It provides some useful tips with the device configuration

  • MSI FX 5700 Ultra problem with linux

    Hi,
    I know that linux are not officially suported by MSI VGA cards, but NVIDIA based VGA cards use to work under linux. I've got a problem with a recent purchase and until now I didn't found any answer.
    Here is my problem, if anyone here have an idea :
    I recently upgraded my video card Geforce 2 MX to a Geforce FX 5700 Ultra from MSI (FX 5700 Ultra TD128).
    I've an Athlon XP 2000,
    motherboard Gigabyte GA-7VAXP, 512 Mb,
    distrib Mandrake 9.2
    latest nvidia driver 5328
    At startup after installation, Mandrake detected a new hardware, but it was not the right card name. The video test failed and X (graphic mode) didn't start.
    Back to console mode, I discovered that even the console mode doesn't work properly : I have no cursor and the screen lines don't scroll up when the screen gets full (very hard to type commands or edit files).
    I checked the XF86Config-4 : for me it seems ok. Actually, it didn't change from the previous card.
    I've no errors in the XFree log (no lines with (EE)).
    I went to the MSI site to look for a newer bios version, but there is'nt.
    I tried both DVI and VGA connection with my LCD monitor, same thing.
    I also tried running Knoppix (liveCD distrib), same prob.
    I pasted below the message i've got on screen when I try to start X manually (this doesn't help much either) :
    XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
          after 0 requests (0 known processed) with 0 events remaining.
    It seems to me that this graphic card simply doesn't work under linux.
    Thanks a lot for any help.

    To get  X to work with your LCD during the installation process append nofb as one of the installation options.
    I have a 17" LCD so you might like to compare the relevant sections in your XF86Config with these:
    Section "Module"
       Load  "dbe"
       Load  "extmod"
       Load  "fbdevhw"
       Load  "glx"
            Load  "dri"
       Load  "record"
       Load  "freetype"
       Load  "type1"
    EndSection
    (The Load "dri" gets removed prior to installing nvidia's Forceware drivers.)
    Section "Monitor"
       Identifier   "Monitor0"
       VendorName   "Monitor Vendor"
       ModelName    "CML174SX"
       DisplaySize  340   270
       HorizSync    24.0 - 80.0
       VertRefresh  56.0 - 75.0
       Option       "dpms"
    EndSection

  • Can anyone help; re: Faxing problems with my 6200 all in one

    Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
    when a fax is being received or when we are sending one.  When the fax fails and we stop the blinking lights, it self tests then turns off.  Sometimes when it does this we get an error message printed that says "Power Failure."  The party being faxed gets 1/2 a fax or 1 page out of 5.  I'll unplug it from the electric and plug it back in and then it will work fine for a day or two.  We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't.  We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
    Any ideas???  The machine is 5 years old and has never given us any trouble until now.  Is it time to upgrade?
    Thanks so very much!!!!
    Joanne

    I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA,  using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

  • Help...problem with my Modem - Dial Up connection

    Hi...I having the following problem with my Powerbook G4 1Ghz Titatium. Hope you can give a hand.
    I am trying to conect to the internet with dail-up but the System Profiler utility says that "Modem Driver Not Found". I went into Network Preferences, and into Network Port configurations and the option of "Internal Modem" simply does not appear. What can I do?. I have been trying to find any installer for the modem but no lucky so far (I have the OS 10.3.9). I can imagine that the drivers were deleted.
    Any help will be highly appreciated. Greetings from Mexico.
    Jorge

    Sounds a bit like my problem mate....
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=06323
    Device Manager: Start --> Settings --> Control Panel --> System --> Hardware(tab) --> Device Manager.
    The error i'm getting is:
    The drivers for this device are not installed. (Code 28)
    To reinstall the drivers for this device, click Reinstall Driver.
    anyone know how to resolve this? it searches the cd for the drivers and cannot find them. What kind of files are drivers?
    Thanks
    Ewan

  • Can anyone help me? Problems with external mixer?

    Hey all,
    First off i would like to say hey to everyone as i am new so i hope someone out there can help me and me likewise in the future.
    Onto my problem. I recently bought an Alesis Multimix 8 USB and i am having a few problems with my iBook recieving the left and right signals from the device. I am currently running it through Ableton Live however when it recognises the mixer it says that there is only one input, the left one.
    For the work i am trying to do i would need the left and right inputs to act as seperate channels into Live. When i first bought the mixer it worked fine and Live read 2 inputs easily however now for some reason it has stopped seeing one.
    I think it may be a problem with the audio software in OS X 3.9 but i am not sure, i am trying to repair what i can however it seems to me that the only option i may have would be reinstalling 3.9 again from scratch.
    If anyone has any ideas about what could be wrong or how to get the 2 inputs back i would be very grateful.
    Please help me as this is driving me mad!
    Cheers
    Jon

    Hi Jon and welcome to Apple Discussions.
    I cannot pretend that I know anything about your subject but a couple of non invasive things you can try before resorting to a re-install. (Usually a last resort with Macs).
    1) Have a look at Audio MIDI setup in your Applications>Utilities folder and see if there is a setting there that with resolve your problem.
    2) Create a new user in System Preferences>Accounts.(always a good troubleshooting measure this, whatever the problem). Log out of your own account and into the new. Does the problem persist? If it doesn't there'll probably be a preference file somewhere to do with the device you are using.
    If the problem does persist then it could be the unit itself, the lead (have you tried a different one/port?), or - worst case scenario- a hardware/sw problem with your iBook.
    Not a lot of constructive help, I'm afraid, but some avenues to explore…
    Best of luck,
    Adrian

  • Help me please, problem with image transition

    Hi everybody,
    For the past few months I have started teaching myself how to use dreamweaver. So far I have had a couple problems my limited knowledge just cant figure out and hoped somebody out there could shed a little light on it.
    I am currently making a small portfolio site for my girlfriend but am having a few problems with trying to get the gallery the way she wants it. She want a black and white image to transition into colour on mouse over with small textbox to appear on mouseover also. I could not create a simple rollover image as she wanted the fade in and fade out to be slightly slower.
    The rather simple idea I had for this was to create a div with a background image which would be the colour version. A black and white version imported over the top which transitions out to 0 opacity on mouseover.
    The problem I have is when the mouse is removed and the mouseout behavior begins to bring the black and white version back. If the mouse is moved over image too quickly there seems to be a conflict between the 2 transitions and it begins to jump a little. You can have a look for yourself:
    http://www.emmatait.com/gallery.html
    I thought maybe if there was some code I could write in that would only make the mouseout behavior begin after all other functions were complete it would solve this but unfortunately I have no idea how to even go about this.
    Any help would be appreciated.
    Thanks all
    Adam

    Hi Adam,
    In my opinion using image swap behaviors is counterproductive.  It makes for slower loading pages and consumes bandwidth.  This can be a problem for mobile device users who often pay for bandwidth usage.
    I'm going to show a neat CSS trick for de-saturating color images. When you hover over the images, they turn to color and their opacity increases to 100%.  Click on images to bring up the full size photos with captions.
    http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
    Nancy O.

  • Need Help, crazy HDV Problem with Final Cut

    Hi Guys, first thanks for looking my problem.
    I have a new Macbook Pro 2,4Ghz with 4GB RAM and Leopard 10.5.4
    So also I have Final Cut Studio 1 updated on 5.1.4.
    My problem: As i captured HDV Material i saw in Quicktime, that there are many fragments, more terrible then hdv compression.In Final Cut 5 the same. So i was looking for an other Mac, so i've found an G5 also with Final Cut 5.1.4 and Tiger OS. But there i saw nothing, no fragments, all good(same material).
    So i think its a problem with between macbook pro,leopard, hdv and final cut 5.1.4
    Can anyone help me, im also able to give you a screenshot with the fragmets. There are very strong to see in the grey colors.
    Thanks

    http://www.bilder-space.de/show.php?file=Gqur6a5PA7NZW2K.jpg
    here is a screen from my problem, thats nomal resulution ... HDV in Final Cut, look at the fragments left and right, thats not normal !
    Message was edited by: jenderbender
    Message was edited by: jenderbender

  • HELP! Serious problem with CD import!

    I have been using iTunes for two years now and I have encountered a problem I have never had before. I am trying to import a CD, but when I import it and listen to it on iTunes it skips and sounds terrible. When I play the CD on a CD player it has no problems with skipping. I've checked for dirt and scratches and there are none. The CD does have extra CD-Rom content on it, could this be a problem? I used the error correction feature on iTunes, it helps a little but the tracks still sound terrible.

    Its protected most likly. Some protected CDs don't stop a program from ripping it completely but cause the ripped song to skip.
    What you have to do if its a store bought protected CD, is use the program it recommeds using to rip to the PC (Most likly Windows Media Player) then use that program to burn the songs to a blank CD.
    Put the newly created burned CD back in the PC and use iTUnes to import it

  • HELP! having problems with the organizer of mediasourc

    hi, i am currently having problems with the organiser view of the mediasource 5. the player view is ok. the explore panel keeps blinking and after a while the mediasource auto closes. this has not happened before during the past weeks. also, another weird thing is that previously when it didn't work, a microsoft error appeared. now it just closes without any message. hope you can help, thanks!
    oh yar, anyway, whats the email adress of the email support?

    What were you doing with the software when the problem occur? A detail step by step description of what you have done is useful.
    i was playing music? haha...
    first i opened the mediasource(organiser view), then, the explorer panel started blinking like mad... then teh thing auto closes, or a window pops up telling me that there is an error( the usual microsoft error...) then when i click don't send, the mediasource closes...
    Did you connect any Zen MP3 player when the problem occur?
    sometimes i did, sometimes i didn't. incidentally, do you have to connect an mp3 player to use mediasource?
    What is the exact version of your MediaSource 5?
    wait lemme check... 5.00.20
    What is your operating system? What is the language of your operating system?
    my operating system is windows XP, and the language is english.
    hope my info has been useful...

  • Please Help?! Problems with Viber for iPhone 4s

    Please help!
    I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
    I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
    The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
    If anyone is able to help me out it would be much appreciated! Thanks

    You activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.

Maybe you are looking for