Help with ASP Connections - New User

I just set up a hosting account with 1 and 1 for a simple
website to catalog a series of yo-yo contest that we coordinate. I
have a simple MS Access database for organizing contest information
that we are trying to get online.
I am new to the application side of this and know very little
about connection strings, DSN, etc. I am experiencing problems with
connecting to the MS Access database that I have uploaded to the
1and 1 servers. If I hardcode the Javascript into the page, I can
connect and pull information but I definitely want to take
advantage of the design interface that Dreamweaver MX 2004 offers.
This is the code from the page that I can get working based
on the FAQ Sheet that 1and 1 offers for database connections:
<html>
<title>Database query using ASP</title>
<body bgcolor="FFFFFF">
<h2>Query table <b>Products</b> with
ASP</h2>
<%
Set dbaseConn = Server.CreateObject("ADODB.Connection")
dbaseConn.Open "DRIVER={Microsoft Access Driver
(*.mdb)};DBQ=" & Server.Mappath("\db\League.mdb") & ";"
SQLQuery = "SELECT * FROM Contest_Information"
Set RS = dbaseConn.Execute(SQLQuery)
%>
<%
Do While Not RS.EOF
%>
<%=RS("cStartDate")%>, <%=RS("cName")%>,
<%=RS("cWebsite")%> List
<p>
<%
RS.MoveNext
Loop
RS.Close
Set RS = Nothing
dbaseConn.Close
Set dbaseConn = Nothing
%>
</body>
</html>
If I put in a "Custom Connection String" using the previous
code:
"DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" &
Server.Mappath("\db\League.mdb") & ";"
Dreamweaver can connect to the database when the connection
is 'tested' but cannot pull any tables and therefore cannot create
bindings.
Guidance...help...I'm stuck...
Thanks in advance.

Hello Lucky.da.boss,
And welcome to Apple Discussions!
is asking can I or is there anyway i can transfer my music off that iPod to my touch?
See this article for tips on how to copy music from your 5th generation iPod to your iTunes library. Once you have successfully done that, you can sync them over to your iPod Touch. There is no way to do it directly.
http://macs.about.com/od/backupsarchives/ss/ipodcopy.htm
Also, I have two applications that aren't downloading I want to know how to delete them.
Tap your finger on one of them and hold it there until you see all your Apps start to wiggle. You will also see a small x in the upper right hand corner of the Apps you can delete. Go ahead and tap this to delete the App. When you are finished, hit the Home button to make the Apps stop wiggling. It might also help to have a look at your iPod's *User Guide.
http://manuals.info.apple.com/enUS/iPod_touch_iOS4.1_UserGuide.pdf
Can you have constant internet service or do they run solely off wi-fi?
Only Wi-fi.
B-rock

Similar Messages

Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one. Thank you.

Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one. Thank you.

iTunes Match is a subscription system that allows you to upload your own music (e.g. coped from CDs) to the cloud so that it shows (in the cloud) on your devices and computers without having to sync/copy it.
Automatic downloads allows to, for example, buy an app on your computer's iTunes and have it automatically download on your phone without having to connect and sync it or go to the Purchased tab in the App Store app on your download and download it yourself - but doing that, going to the Purchased tab and redownloading an app, should get it associated.
But no, I'm not aware of any problems that not having it associated causes.

Help with Oracle connection

Hi,
I am new to the whole Java experience and am wading my way through servlets pretty well. However, I have run across a problem that I simply cannot connect the pieces of. I have a set of servlets that I am planning on deploying to a client. These servlets will connect to an Oracle database. Since the client connection url/user/password will not be the same as the values I am using in my development efforts, I don't want to set the values in my servlets, i.e:
OracleConnectionPoolDataSource ocpds = new OracleConnectionPoolDataSource();
ocpds.setURL("jdbc:oracle:thin:@databasename");
ocpds.setUser("User");
ocpds.setPassword("Password");
// Create a pooled connection
PooledConnection pc = ocpds.getPooledConnection();
I have created my servlets using Oracle's JDeveloper, so I have a connections.xml file and a data-sources.xml file which contain the URL, userID and Password of the instance to connect to.
Is there a way I can grab that information from the connections.xml file or the data-sources.xml file from within my servlet, so I don't have to give static values for the URL, userID and password within the servlet?
Thanks for the help,
-Pete

Hi Pete,
You can do either one of two solutions:
(1) Your XML files idea is a good one. Read them in the servlet init method and hang onto the values.
(2) You can create a JNDI DSN and use a pooled connection that's maintained by your servlet/JSP container. Here's how I do it with Tomcat 4.1:
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html
Maybe that will give you some ideas on how to accomplish the same thing using your container. - MOD

Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords. More than one account downloaded from older Laptop. Now the computer has the turning wheel in from of gray screen and won't go any further when

I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se. I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc. Can't keep them straight even though I write everything down. The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black. When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that. Then I held the on button in the back until the screen went black again.
What should I do? Is there a way to combine all my accounts into one account with one Apple ID? I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them.
In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
Very confused. Any Ideas about how I can get the computer to start up again and show a new screen?
Thanks to anyone who has workable suggestions.

If you really believe that your system has been compromised, here's what you do:
Disconnect your Mac from your cable modem;
Back up any documents on your system that are important to you;
Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
Choose a language and click the arrow button to continue;
From the Utilities menu, choose Disk Utility;
In Disk Utility, select your computer's hard drive;
Click the "Erase" tab;
Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
Click the "Erase" button and allow it to process;
Once the "erase process has completed (it will take a while), reinstall Mac OS X.
Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
Regards.

Need help with G5 connected to AirPortExpress!

I simply can't find the source of this problem, and any help is very welcome:
When my G5 2x2,5GHz and OS 10.4.8 is connected to my AirPort Express network, the connection suddenly becomes very slow and it takes forever to download a simple page. The message "You are not connected to Internet" often shows up, and trying to reconnect fails. The only solution is to restart both the ADSL modem and the Airport Express.
- The funny thing is that with my brand new MacBookPro and the old iMac G4, this never happens. They stay connected both to the network and Internet without any similiar problems.
Could it be the wireless antenna on the back of the G5, or could it be some security settings or OSX problems on the G5? I am not sure how to find the source of the problem...
Helge K.

Hello Helge,
I have a couple of questions.
How is the speed during a file transfer between the G5 and the imac ( say a large file) compared to the iMac and the Macbook?
Forget the web for a minute here and let zero down on the problem. Is it the current network, or a specific machine, or is it that basted ADSL modem?
Try transferring a file over your network and compare if there is a noticeable difference then lets move that G5 away from the wall ( the ant is in the back) and try with the G5 turn 180 degrees around, any better? If not double check the ant lead that connects to the card or take in for service and have the unit inspected for a pinched/ loose cable.
If moving a file around the network is ok then we have a web issue. Run a trace-route to Apple's main site and compare it to the macbook. What's different?
Nothing? Then there is the famous reset Safari and test or see what Firefox does.
Good Luck,
Cowsweat

Help with JAVA StringObject - & assign user input; StringMethod

Hi Everyone! I need help with this Java Program, I need to write a program, single class, & file. That will prompt the user to enter a word. The output will be separted by hypens and do this until the user enters exit. I think this is done by using a string variable. Then use the length of the word to setup a loop to print each letter out with hypens. (example c-a-t)
1. I think I should store the word like this: Word.Method(). Not sure of this the API was confusing for me because I wasn't sure of what to do.
2. A string method to find out how many letters are in the user's word in order to setup a loop to print each letter out. I think I can use a While loop to accomplish this?
3. A string method to access each letter in a string object individually in order to print individual letters to the screen with those hypens. This is really confusing for me? Can this be accomplished in the While loop? or do I declare variables in the main method.
Any examples you can refer me to would be greatly appreciated. Thanks

Getting user input:
This may look strange to a newbie but there's nothing much you can do since you wanted a single class file:import java.io.*
public class InputTest {
   public static void main(String[] args) {
      BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
      System.out.println("Hi! Please type a word and press enter.");
      String lineReadFromUser = in.readLine();
      System.out.println("You typed " + lineReadFromUser);
}You can get the lenght of a String using the length() method. Example: int len = "Foobar".length();
You can get the individual characters of a String with the charAt() method. Example: char firstCharOfString = string.charAt(0);
(remember that the argument must be from 0 to length-1)
You can access the documentation of all classes, including java.lang.String, at http://java.sun.com/j2se/1.3/docs/api/index.html You can also download the docs.

Can you help with my connection issues

I cannot connect to my Contribute CS3 even though my server is fine. Does anyone have any suggestions? I spent the last hour on the phone with my server company and they tried but failed to help me connect.

Please try the following steps.
Delete the existing connection from Edit -> My connection .
Create a new connection and when you Click the Advanced button next to the "How do you connect to your web server?" field in the Connection Information dialog box.
Try toggling the Passive Mode check box (if it is unchecked, check it; if it is checked, uncheck it).
If you are behind a firewall, check the Use firewall/proxy settings when connecting check box and click the Firewall Settings or Proxy Settings button to enter firewall information. Ask your local network administrator for help with these settings.
Once done with the new connection you would be able to connect to your website. For more information on connection issues you may use this link http://helpx.adobe.com/contribute/kb/troubleshoot-connection-problems-contribute.html
Regards,
Rajeev

Need Help as i m new user of Blackberry

I have Blackberry 8300. I install "Blackberry Desktop software 6" to connect my phone with PC. It installed successfully. I used USB Cable to connect it. When i run the software, on start it open a new small window "Unlock Blackberry device" it show me my phone model and my phone's PIN Number and ask for password? I give password that i use for my phone lock or unlock, but it is not accepting that. please help me to connect my phone with the PC.
Thanks & Regards,
Tanveer Anjum
Karachi, Pakistan.

Are you sure that you are using the designated password that is found when you click the options icon and then choose "Password?"
Phil

Help with motherboard connections...

guys could u please help me out wit the cable connections to the motherboard..
jus bought the new components today to assemble my cpu..
Proc: AMD Athlon X2 3600
MB : MSI K9AGM2
Ram : 1gb kingston ddr2 667mhz
HD: Samsung spinpoint(40 gb) IDE
drive : Samsung CDRW+DVD combo
as of now...i've put in the motherboard,made the basic connections except
but the 'speaker' wire from the cabinet,supply for the Cabinet fan..
SO COULD U JUS GIVE ME A STEP-BY-STEP GUIDE TO CHECK ALL CONNECTIONS BEFORE POWERIN IT ON ???
btw,this is my first time...assembling a cpu..
REALLY APPRECIATE THE HELP..
THNX.
shown below are pics of wat i've done so far..

thnx all..i actually was right with my connections after all...after much apprehension i turned it on a few hours after i first posted here and it FIRED UP INSTANTLY WITH NO PROBLEMS WHATSOEVER !
i was worried b'coz there was no slot to insert the 'cabinet speaker' pin & whether the board had an onboard speaker..
and "vernonion"..the psu i use came with my mercury cabinet..it's a 300w mercury psu and yes its only got a 20pin connector..
considering i don't use any graphics card nor any extra devices i feel this is enough for now..

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

Can someone help with a connection problem?

I have a DroidX2 and have noticed that the phone routinely switches from 3G to 1X, especially in certain rooms in the house..
This is consistant and usually the signal is only two bars.
Whenever I try to watch a Youtube video it will play for maybe 12 seconds and then I will have to play with the settings in Youtube to download more of the video. Maybe 1 out of 50 times the video plays straight through without stopping. Most of the time the screen will show 1X instead of 3G. Could it be my phone settings, phone coverage or Youtube causing the problem? I sometimes have dropped calls as well. I have the most current software and Youtube was recently updated. I am also receiving "cannot establish a connection" messages on Youtube. Can someone please help? Thank you.

Lorenzo1950, thanks for posting! Are you still having issues with your connections? What is your zip code? How long has this been an issue? Does this issue with streaming video only happen at home or everywhere?^SP

Help....New User, cant log into my BT Yahoo accoun...

I cant get onto my BT Yahoo account.....I tried reseting but think after 3 attemps somethings not right...
I dont recall getting my welcome E-Mail with my @btinternet.com user name thinking about it either....so no idea where that got sent.....already been on the phone to BT for an hour earlier today to change my Broadband option as i was on the 10gb limit and used 1.5gb not even doing anything hope someone can help im pulling my hair out.....Trying to activate BT FON and dont think i can do it without my :btinternet.com username and pass....WHICH I NEVER RECIEVED..........plz someone help...or do i have to spend hours on the phone AGAIN...
Thank you
Martin W

The contact for the MODS is http://bt.custhelp.com/app/contact_email/c/4951 (Allow 72 hours for a response)
They should be able to help, if you have only recently placed and received the order then you may get some information through the normal post. May be worth a day or two wait.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

[8i] Need help with hierarchical (connect by) query

First, I'm working in 8i.
My problem is, I keep getting the error ORA-01437: cannot have join with CONNECT BY.
And, the reason I get that error is because one of the criteria I need to use to prune some branches with is in another table... Is there anyway to work around this? I tried an in-line view (but got the same error). I thought about using the connect by query as an in-line view and filtering off what I don't want that way, but I'm not sure how to filter out an entire branch...
Here is some simplified sample data:
CREATE TABLE     bom_test
(     parent          CHAR(25)
,     component     CHAR(25)
,     qty_per          NUMBER(9,5)
INSERT INTO     bom_test
VALUES     ('ABC-1','101-34',10);
INSERT INTO     bom_test
VALUES     ('ABC-1','A-109-347',2);
INSERT INTO     bom_test
VALUES     ('ABC-1','ABC-100G',1);
INSERT INTO     bom_test
VALUES     ('ABC-1','1A247G01',2);
INSERT INTO     bom_test
VALUES     ('ABC-100G','70052',18);
INSERT INTO     bom_test
VALUES     ('ABC-100G','M9532-278',5);
INSERT INTO     bom_test
VALUES     ('1A247G01','X525-101',2);
INSERT INTO     bom_test
VALUES     ('1A247G01','1062-324',2);
INSERT INTO     bom_test
VALUES     ('X525-101','R245-9010',2);
CREATE TABLE     part_test
(     part_nbr     CHAR(25)
,     part_type     CHAR(1)
INSERT INTO     part_test
VALUES     ('ABC-1','M');
INSERT INTO     part_test
VALUES     ('101-34','P');
INSERT INTO     part_test
VALUES     ('A-109-347','P');
INSERT INTO     part_test
VALUES     ('ABC-100G','M');
INSERT INTO     part_test
VALUES     ('1A247G01','P');
INSERT INTO     part_test
VALUES     ('70052','P');
INSERT INTO     part_test
VALUES     ('M9532-278','P');
INSERT INTO     part_test
VALUES     ('X525-101','M');
INSERT INTO     part_test
VALUES     ('1062-324','P');
INSERT INTO     part_test
VALUES     ('R245-9010','P');This is the basic query (with no pruning of branches):
SELECT     LEVEL
,     b.component
,     b.parent
,     b.qty_per
FROM     bom_test b
START WITH          b.parent     = 'ABC-1'
CONNECT BY PRIOR     b.component     = b.parentThe query above gives the results:
      LEVEL COMPONENT                 PARENT                        QTY_PER
      1.000 101-34                    ABC-1                          10.000
      1.000 A-109-347                 ABC-1                           2.000
      1.000 ABC-100G                  ABC-1                           1.000
      2.000 70052                     ABC-100G                       18.000
      2.000 M9532-278                 ABC-100G                        5.000
      1.000 1A247G01                  ABC-1                           2.000
      2.000 X525-101                  1A247G01                        2.000
      3.000 R245-9010                 X525-101                        2.000
      2.000 1062-324                  1A247G01                        2.000
9 rows selected....but I only want the branches (children, grandchildren, etc.) of part type 'M'.
e.g.:
      LEVEL COMPONENT                 PARENT                        QTY_PER
      1.000 101-34                    ABC-1                          10.000
      1.000 A-109-347                 ABC-1                           2.000
      1.000 ABC-100G                  ABC-1                           1.000
      2.000 70052                     ABC-100G                       18.000
      2.000 M9532-278                 ABC-100G                        5.000
      1.000 1A247G01                  ABC-1                           2.000Any suggestions?

Hi,
user11033437 wrote:
First, I'm working in 8i.
My problem is, I keep getting the error ORA-01437: cannot have join with CONNECT BY.
And, the reason I get that error is because one of the criteria I need to use to prune some branches with is in another table... Is there anyway to work around this? I tried an in-line view (but got the same error). Post your query. It's very hard to tell what you're doing wrong if we don't know what you're doing.
...but I only want the branches (children, grandchildren, etc.) of part type 'M'.
e.g.:
LEVEL COMPONENT                 PARENT                        QTY_PER
1.000 101-34                    ABC-1                          10.000
1.000 A-109-347                 ABC-1                           2.000
1.000 ABC-100G                  ABC-1                           1.000
2.000 70052                     ABC-100G                       18.000
2.000 M9532-278                 ABC-100G                        5.000
1.000 1A247G01                  ABC-1                           2.000
You mean you want don't want the descendants (children, grandchildren, etc.) of any component whose part_type is not 'M'.
The part_type of the component itself doesn't matter: component '101-34' is included, even though its part_type is 'P', and component 'X525-101' is excluded, even though its part_type is 'M'.
>
Any suggestions?Sorry, I don't have an Oracle 8.1 database at hand now. All three of the queries below get the correct results in Oracle 10.2, and I don't believe they do anything that isn't allowed in 8.1.
You can't do a join and CONNECT BY in the same query on Oracle 8.1.
I believe you can do one first, then the other, using in-line views. The frist two queries do the join first.
--     Query 1: Join First
SELECT     LEVEL
,     component
,     parent
,     qty_per
FROM     (     -- Begin in-line view to join bom_test and part_test
          SELECT     b.component
          ,     b.parent
          ,     b.qty_per
          ,     p.part_type     AS parent_type
          FROM     bom_test     b
          ,     part_test     p
          WHERE     p.part_nbr     = b.parent
     )     -- End in-line view to join bom_test and part_test
START WITH     parent     = 'ABC-1'
CONNECT BY     parent          = PRIOR component
     AND     parent_type     = 'M'
;Query 2 is very much like Query 1, but it does more filtering in the sub-query, returning only rows hose part_type or whose parent's part_type is 'M". Your desired result set will be a tree taken entirely from this set. Query 2 may be faster, because the sub-query is more selective, but then again, it may be slower because it has to do an extra join.
{code}
-- Query 2: Join first, prune in sub-query
SELECT     LEVEL
,     component
,     parent
,     qty_per
FROM     (     -- Begin in-line view to join bom_test and part_test
          SELECT     b.component
          ,     b.parent
          ,     b.qty_per
          ,     p.part_type     AS parent_type
          FROM     bom_test     b
          ,     part_test     p
          ,     part_test     c
          WHERE     p.part_nbr     = b.parent
          AND     c.part_nbr     = b.component
          AND     'M'          IN (c.part_type, p.part_type)
     )     -- End in-line view to join bom_test and part_test
START WITH     parent     = 'ABC-1'
CONNECT BY     parent          = PRIOR component
     AND     parent_type     = 'M'
{code}
Query 3, below, takes a completely different approach. It does the CONNECT BY query first, then does a join to see what the parent's part_type is. We can easily cut out all the nodes whose parent's part_type is not 'M', but that will leave components like 'R245-9010' whose parent has part_type 'M', but should be excluded because its parent is excluded. To get the correct results, we can do another CONNECT BY query, using the same START WITH and CONNECT BY conditions, but this time only looking at the pruhed results of the first CONNECT BY query.
{code}
--     Query 3: CONNECT BY, Prune, CONNECT BY again
SELECT     LEVEL
,     component
,     parent
,     qty_per
FROM     (     -- Begin in-line view of 'M' parts in hierarchy
          SELECT     h.component
          ,     h.parent
          ,     h.qty_per
          FROM     (     -- Begin in-line view h, hierarchy from bom_test
                    SELECT     component
                    ,     parent
                    ,     qty_per
                    FROM     bom_test
                    START WITH     parent     = 'ABC-1'
                    CONNECT BY     parent     = PRIOR component
               ) h     -- End in-line view h, hierarchy from bom_test
          ,     part_test     p
          WHERE     p.part_nbr     = h.parent
          AND     p.part_type     = 'M'
     )     -- End in-line view of 'M' parts in hierarchy
START WITH     parent     = 'ABC-1'
CONNECT BY     parent     = PRIOR component
{code}
I suspect that Query 3 will be slower than the others, but if the CONNECT BY query is extremely selective, it may be better.
It would be interesting to see your findings using the full tables. Please post your observations and the explain plan output.
As usual, your message is a model of completeness and clarity:
<ul>
<li>good sample data,
<li> posted in a way people can use it,
<li>clear results,
<li> good explanation
<li> nciely formatted code
</ul>
Keep up the good work!

Apex homepage with login and new user registration

Hello there folks,
I m building an application on Apex 4.2.1
Our login page (default login page 101 from Cloudy 24 theme) has a login for existing users, works perfect.
On the same page, I want to add a new region for new users to register.
So we add a Button, named REGISTER NEW USER that points to a new form that a user inputs his data.
But unfortunetely the button doesn't go to the new page and our bet is that it's because of authentication issues.
How can we move to the new form, without needing login credentials?

socrates wrote:
Hello there folks,
I m building an application on Apex 4.2.1
Our login page (default login page 101 from Cloudy 24 theme) has a login for existing users, works perfect.
On the same page, I want to add a new region for new users to register.
So we add a Button, named REGISTER NEW USER that points to a new form that a user inputs his data.
But unfortunetely the button doesn't go to the new page and our bet is that it's because of authentication issues.
How can we move to the new form, without needing login credentials?In the Security settings of the new page, set the Authentication property to Page Is Public.

Can i check how many people are using my apple id if so please help there is a new user with my apple id and i dont know who it is

i have multiple people using my apple id which are my brothers and this new guy showed up and set up a new apple id with an ipad mini and i want to track this person down im afraid this will escelate to id theft and i want to check all users of my apple id

Change the password and make sure those people can't access your email.

Help with ASP Connections - New User

Similar Messages

Maybe you are looking for