Help with Canon iR2016 printer please...

I use the Canon iR2016 monochrome laser printer in my office, as I need the large A3 format for sheet music purposes.
Alas for Mountain Lion, the Canon website says
There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. Refer to our FAQ section for connectivity issues.
First of all, I can't even find their FAQ section...
Secondly, Canon being always behind when it comes to Mac OS support at least for office machines, what if I upgraded to Mountain Lion only to find that the iR2016 isn't supported? i.e., should I or shouldn't I take that chance at this point?
Many thanks in advance for any and all pointers.

While it is true that Canon does take some time to release official driver for the new OS, the reality with ML is that the current 10.7 drivers do install and function on 10.8.
For the iR2016, here is a link to the UFR2 v2.41 driver from Canon Australia.
Also, with the iR2016 supporting the PCL printer language, you could use the Generic PCL Laser driver included with ML. Although I am not sure about this Generic driver supporting A3 printing, so I would have to confirm this.

Similar Messages

I can't connect OS X Yosemite 10.10.2 version with Canon LBP2900 Printer, Please help how to connect...

Hi.... Apple Support Communities...
I used Apple MacBook Air 2014 (13 inch) series with OS X Yosemite 10.10.2 version...
And I have a printer of Canon LBP2900...
My problem is that, I can't connect my Canon LBP2900 printer with my new OS X Yosemite 10.10.2 version.
My previous OS X Mavericks is working well with my Canon LBP2900 printer...
But when I upgrade it to OS X Yosemite 10.10.2 version, my printer is not working...
Anybody please help me how can i connect OS X Yosemite 10.10.2 version with my Canon LBP2900 printer....
Thanking you.... Your suggestion in this regards is highly appriciate...

Your first step would be to upgrade to Snow Leopard (10.6). To do that, you would need to purchase the Snow Leopard DVD. Following that you could determine how much further you could upgrade.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Help with buying used printer, please!

I have 5 - 15AHP Laserjet Print Cartridges (my sister closed her office) ..... I have a LaserJet 4000 and the 15A doesn't fit of course.
I am thinking of buying a used printer so I could use these cartridges. 15A fits HP Laserjet 1000; 1005; 1200; 1220; 3300; and 3380. Can I get some suggestions on which one to buy and where? I really just need straight printing and don't want to spend a lot.
thanks
LK - Denver

While it is true that Canon does take some time to release official driver for the new OS, the reality with ML is that the current 10.7 drivers do install and function on 10.8.
For the iR2016, here is a link to the UFR2 v2.41 driver from Canon Australia.
Also, with the iR2016 supporting the PCL printer language, you could use the Generic PCL Laser driver included with ML. Although I am not sure about this Generic driver supporting A3 printing, so I would have to confirm this.

HT4199 I need help with getting my printer to print, PLEASE.

I need help with getting my printer to print, Please.

What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert

Can't get my iphone4 AirPrint to work with Canon mx712 printer

Can't get my iphone4 AirPrint to work with canon mx712 printer
I've reviewed all network, printer, phone settings

airprint basic http://support.apple.com/kb/ht4356 see if that printer is compatible.
airprint troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
If it is not compatible then you will need to look at the appstore to find something compatible to be able to print.

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Photoshop Elements 9 Printer Driver Problems with Canon MP600 printer

I'm having problems using my Canon MP600 printer with Photoshop Elements 9 with regard to the paper allocation. The MP600 has 2 paper trays and for some reason when using Elements it prefers you to use the top loading (auto sheet feeder) method all the time. For space reasons I need to use the bottom cassette. When you initially go into the settings for the printer within elements you can choose the cassette and paper type etc no problem and make a print. When you go back in to do another print it changes the setting back to auto sheet feeder so you have to change it back again which is winding me up! I have got the latest drivers for the printer and they are set up to how I would like the printer to work but Elements changes some of those settings for some reason. Does anyone know a way of fixing this please ?? When I'm not in Photoshop if I go to print something from the web it performs perfectly so I can only assume its Elements thats changing the settings.
Also when I print small thumbnail sized pictures on an A4 sheet of paper to test what the photo colour will look like when I go back into the print menu it puts the thumnail picture back in the center of the sheet of A4 rather than leaving it where it was, so then you have to put in the top and sideways measurements again to carry on ! The last version of Photoshop I had never did that. Does anyone know had to solve that problem ?? Any thoughts on the above problems would be gratefully recieved !

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Need help installing Canon network printer on Mountain Lion

I am trying to install a Canon MF4270 network printer with my Macbook Air running Mountain Lion.
I added the printer using its IP, and selected the MF4200 driver from the list that came installed with the OS. The printer worked, but it would not allow me to print double-sided (the option was greyed out). Some research showed that other people with similar problems simply updated the printer driver.
I checked the driver version and it said 2.0. I went to the Canon website and downloaded the newest version of the driver, which said 2.43.
I re-added the printer with the new driver. Same problem.
So I deleted the driver and the list of associated files, given to me by Canon tech support (I verified then that the MF4200 driver was no longer on the list), then installed the new driver (restarting my computer at every step). I re-added the printer.
Now, it doesn't work at all. When I try to print, I get the following message: "Canon UFR II Printer Driver / Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information."
I tried adding the printer using the Generic PostScript Printer driver, and when I print, it says that it is printing and I get no errors, but nothing prints.
Now, I can't print at all, and no one at Canon or Apple has been able to solve the problem.
Please help.

First, delete the print queue in the Print & Scan preference pane, if you haven't already done so.
Back up all data.
Triple-click the line below on this page to select it:
/Library/Caches/Canon/CUPSCAPT/CCPD/ccpd.conf
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Trash. You may be prompted for your login password.
Recreate the print queue.
Credit for this solution to ASC user PAHU.

Help with Canon Pixma MP640

Hi all,
Okay let me run down the steps I've done so far and what I've learned. Apparently the newest version of cups does not work with Canon printers it seems, because of an issue with usblp.
First I got a version of Cups from the AUR with usblp enabled. The package is cups-usblp 1.4.3-2.
Next I followed a guide about Arch and the MP640 here.
The good news is that now my printer is recognized and it appears that all is well. However, when I try to print a test page (as Root) or try to print something from Kword I get the error:
"/usr/lib/cups/filter/pstocanonij failed"
The pstocannonij file exists and I have the correct ppd installed. I'm running Arch64 and I have all of the 32bit libraries installed. I have the cups and usblp daemons active in my rc.conf.
Any ideas? Any help would be greatly appreciated and thank you in advance!

I've recently bought a Canon PIXMA MP640 multifunction device and it's working perfectly on my Vista 32-bit system. Now it's time to make it work on Arch 64-bit. Is it possible to make this device work without using any 32-bit libraries? I would like my system stay clean off any 32-bit software. Unfortunately on Canon website drivers for this model are still signed as TBD, although I've found this and this.
Last edited by Zibi1981 (2010-10-20 18:31:04)

MP Navigator 3.0 scanner isn't working with Canon mp510 printer

Hello,
I'm using a Canon mp510 printer/scanner, using the MP Navigator software 3.0 and whenever I click on the scanner, the program shuts down completely. I have already tried to uninstall, reinstall, search for updates (and 3.0 is the latest one I have found), etc...and nothing is fixing the problem. I just recently updated to Snow Leopard and only started having the problems at that time. I know the problem is not the printer, as the computer recognizes it when I used Image Capture, but I would prefer to stick to MP Navigator and am frustrated nothing is working. Any help or suggestions?!?!

Canon Australia has [MP Navigator v3.04|http://support-au.canon.com.au/contents/AU/EN/0900172801.html]. If you don't already have this version (assuming your 3.0 could be 3.04) then install this latest one.
To use MP Navigator you also need to have the [Canon MP510 Scanner Driver v12.13.12|http://support-au.canon.com.au/contents/AU/EN/0900218401.html]
Note that Image Capture uses a different scanner driver that is included with Snow Leopard.

Can you help with wireless usb printing?

I have a D-Link router ([DI-824VUP) that works fine as far as geting online and printing to an ethernet printer,(HP1300n) wirelessly. I recently bought this router because it has a usb printer port, yet I can not get it to see the usb printer (Canon S830D). D-Link was no help, as they don't support Apple wireless printing, even though they do support wired printing via their router. QUESTION-any idea how to get powerbook to see the printer when connected to the router? Printer setup utility does not see it, only the HP. Thanks-bobbabe
OS 10.3.9.
Titanium Powerbook 667. Mac OS X (10.3.9) D-Link router(DI-824VUP)

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

Help with Rendering/Finalizing Project Please?

Hi,
I am so new to this entire Adobe and video making that I've spent the last few hours pulling hair literally. I am hoping that some of you experts can take some time to give this novice some much needed guidance. Okay, I'm begging!
I recorded a wedding on a XHA1 MiniDV camera in 1080p 24fps. Captured the clips to PP CS4 which in turn makes them MPEG, I believe. Included in my project are addition clips imported from a Canon HF S21 also in 1080p 24fps and a Rebel T2i in ?? format. Didn't use too many clips from the rebel.
Anyhow, my project settings in PP are:
Video - Display format = Frames
Audio - Display format = Audio Samples
Capture Format = HDV
All Scratch disks are saved on to my desktop with 284 GB
Here is a picture of the sequence settings:
Again, sorry for the ignorance and stupiditiy. I am wondering what would help.
I am trying to burn it all with chapter markers and additional features to a DVD.
- What would be the BEST settings for exporting to Encore?
- Should I separate each section into a different sequence - would that help? For example, the pre-ceremony to one sequence. The ceremony to another. The reception to another. Or should I make new projects for each?
- How can I make my computer faster? Is it the memory, ram, etc? What should I do?
Right now, it has failed over and over in rendering in After Effects. It stops encoding when I export to AME. It says 158 hours for rendering in PP.
HELP!
I am using an iMac and here are computer specs (again, I am not even sure what to post to help you all help me):
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i7
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Here is a pic of what I'm working on. I know the pic-in-pic feature probably doesn't help with rendering time either but 158 hours is killing me. In fact, when I go to sleep, I wake up to an error message where PP has closed.

leevang,
Your computer looks great. I wouldn't be too worried about the time PP shows for encoding etc.
I have found that right when I first start to encode a project, 73 hours or 12 hours is normal. Rendering is not necessary for encoding. However when I look back later, the time has dropped greatly.
Down to 2 or 3 hours. that's when I follow Jeff B.'s suggestions when I do a 2X scan.......

Help with Canon iR2016 printer please...

Similar Messages

Maybe you are looking for