Help with email delivery from server to client
I would appreciate some help / insite into forwarding email from my home server to my Arch client.
Initially I setup Getmail on the Arch client, can download POP3 email to my home directory, and then read it using Kmail via the Maildir format.
This works great and was easy to implement. However, I wanted to get a little more 'advanced' so getmail was setup on the server and can download email no problem. But what I have not been able to figure out yet is how to forward it to my home directory on the Arch client.
I have googled and read the wiki and it seems like a MDA is needed to do this. Is this correct?
Or, can I direct Kmail to look at some directory on the server (/var/spool/mail??) and grab the mail from there?
Any help would be appreciated.
Thanks,
JTD
Endperform wrote:Are you looking to keep your email on the server at all times? If so, I suggest looking into setting up IMAP on your home server which will do what you need.
Endperform: yes that is the plan. Do still keep getmail to fetch the pop3 email from my ISP and the setup IMAP so 'forward' onto the Arch client?
Thanks for the reply.
pyther wrote:I'd have to second what endperform said, if you want to keep you mail on your server at all times, just check out IMAP. Also you can organize your mail in folders with imap
pyther: Thanks for confirming what I've googled.
JTD
Similar Messages
-
Help :- Send Large File From Server To Client
Hey guys, I am stuck with a problem.Hope u guys might be able to help me out. My problem is :-
From client i am doing an operation which results in calculation of results by server and saving a file on the server..But i want to see what results have been computed by the server and hence i want to stream that file back to the client..
The file may be of 100MB as well , that is, the size of the file may be huge.
I want u guys to tell me how to stream that file back to the client..I tried returning byte array which gets serialized and then received at client side but as i said the file may be huge so memory problem may arise, so returning byte[] from function is not a good solution..
I am looking something where server can send the file back to the client in chunks..Client keeps receiving these chucks and keep putting them in the file.
So how to make server send file in chunks??Also, i don't know the hostname and ports...so sockets i can't use...
Any Another way to do it...??
is PipedStream a solution??
Please guys, help me
Thanks in advance
Edited by: 854509 on Apr 25, 2011 8:28 AM
Edited by: 854509 on Apr 25, 2011 8:59 AM854509 wrote:
I knew about sockets but as i said i am able to send request to server by client by calling a remote method...There i haven't used sockets...RMI uses sockets, I assume you mean you don't access to the underlying socket.
So i wanted to know if we can without using sockets send file back to Client..I would have the RMI return the connection details where the result can be obtains, .e.g with hostname, port, and file name to use.
I would suggest trying to compress the stream as well (just wrapp the stream on the sender/reciever), especially for files over 1 MB.
Tell me something abt PipedStreams as well..If they are of any use here or not?I don't see how. PipedStreams can be used to share data between threads in the same process.
If RMI is your only choice you can perform a method which would return alot of data and have seperate methods to download portions of it.
e.g.
public int loadBigFile(String filename); // returns the number of portions.
public byte[] returnPortion(int n);
int portions = rmi.loadBigFile("my-big-file.xml");
for(int i=0;i<portions;i++) {
byte[] bytes = rmi.returnPortion(i);
// do something with bytes.
}You can have the server cleanup the file when the last portion is read. -
How can i transfer more than one file from server to client
Hi,
our requirement is transfer more than one files from server to client using the
webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
regards
matjust an idea ...
for this purpose let us put aside security concerns and other potential problems....
-- Get the content of a server directory with Filter and create zip file
1) create a class that implements java.io.FilenameFilter ...
2) define accept() method ...
3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
4) use java.util.Zip to create ZIP file on the server side
-- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
-- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
5) use webutil to transfer file on the client
6) use Java on client side to unzip transferred file
if you think this is not too complicated, you should try ...
Regards,
Vladimir -
I am looking for custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadHi Greetings.
pls check if it helps you.
http://msdn.microsoft.com/en-us/library/office/jj554504(v=office.15).aspx
Please remember to click 'Mark as Answer' on the answer if it helps you -
Redundant folders created in root of C drive of server and Client . I want to stop the same and want to automatically delete them from server and client .
Please let me know the solution to delete them not manually . It should not create automatically .Is there a way we can change the path of creation.
Is there a way that once the folfer is create should be automatically deleted once the task is done.
Redundant folders are created in the root of my C drive all the time,
folder names look like:
09b0508d0bd2dbd70523
56f51b81c1462bb378009ee4d5ed03
02afe4378371907aca40abThis is a duplicate of
http://social.technet.microsoft.com/Forums/systemcenter/en-US/ae99c2d0-8dea-4c5e-8a79-17e08e9e5de4/sccm-2012-issue-folders-with-long-guid-are-created-in-c-drive?forum=winservergen#ae99c2d0-8dea-4c5e-8a79-17e08e9e5de4
Jason | http://blog.configmgrftw.com -
All contacts lost on backup. replaced with emails addresses from macbook
Today i backed up my BB to my macbook. I selected full back up as usual, only when i checked the macbook, the contacts from my phone hadn't copied over.
So, i looked on support which said i should select contacts on my phone , choose options and then switch off wireless synchronisation and try again , with USB again.
I did this. Now strangely all my phone numbers have vanished from my phone and have been replaced with email contacts from my macbook. All numbers- gone.
i tried then to go to restore on macbook again, using BB software desktop thingy it will allow me to back up everything apart from my contacts which is greyed out.
Can someone please help. Ive got 10 years worth of phone numbers on that phone and ive lost every single one.
Is there any way to get them back?
Whats happened?Contact applecare. they have procedures for this.
-
VTP from server to client mode
Hi,
I have couple switches setup in VTP server mode. All of them have the same VTP revision number, but most of them should be in VTP client mode.
Will switching some of them (but the one I really want to have in VTP server mode) into VTP client mode have negative impact on the network? I do know that if you change a switch (with the highest rev #) from client mode to server mode I could end up with problems. However, in my case it will be switching them from server to client mode with all of them with the same Rev #.
Thanks for the helpHello,
change the switches in question to VTP transparent mode first, and then to client mode, that will reset the revision and prevent any possible conflicts.
In addition, in case you need to change the root switch as well, in general the VTP server switch should also be the root for your VLANs. You can set the switch as root by configuring it as:
spanning-tree vlan x priority 0
HTH,
GP -
Move files from server to client
I have create txt file in server directory using UTL_FILE package,
and I put in the directory in server.
Server platform is linux. and client platform in Windows.
What I want to ask is there any possibilities to copy that file from server to client using pl/sql ? could all of you "The Gurus" give me a script example ?
Thanks a lot.
regards,
indra> What I want to ask is there any possibilities to copy that file from server
to client using pl/sql
No. Not really.
Think about it.. the file is on the server. PL/SQL code executes inside the Oracle server session that is servicing the client.
Just how is PL/SQL (on the server) suppose to reach out and push that file to a client's file system and directory?
PL/SQL cannot do this. You need something on the client that will accept the file. You need something in-between the client and PL/SQL that will handle the transfer of the file. This something can be ftp, scp, tftp, NetBIOS etc.
Anyway you look at this, it does not make sense. You are turning the server into the client that needs to push the file. You are turning the client into a server that needs to accept the file.
Why? This is contrary to the basic client-server RDBMS architecture. You are adding more complexities and more moving parts to the architecture by forcing a swap of client and server roles. The are now a far greater likelihood of errors and bugs and failures.
It does not make sense to do it this way.
What is the business requirement you are trying to satisfy? Instead of us trying to help you to hack a flawed solution, let us rather assist you in determining the correct and proper solution. -
Help with email alert using email_alertcdf from download
We are attempting to get the email alert function working. We have downloaded the files into their proper locations, ensured the JRE is installed, registered the function, updated the .udf and are attempting to execute a script.The script errors out with an "Unexpected End of File reached" error.Any help is greatly appreciated!
Endperform wrote:Are you looking to keep your email on the server at all times? If so, I suggest looking into setting up IMAP on your home server which will do what you need.
Endperform: yes that is the plan. Do still keep getmail to fetch the pop3 email from my ISP and the setup IMAP so 'forward' onto the Arch client?
Thanks for the reply.
pyther wrote:I'd have to second what endperform said, if you want to keep you mail on your server at all times, just check out IMAP. Also you can organize your mail in folders with imap
pyther: Thanks for confirming what I've googled.
JTD -
I have had issues with my iphone deleting emails without my consent. It seems as if it doesn't want to hold onto emails for an extended amount of time. I use my iphone for all work related emails and personal. I have created folders to store important emails in related to work. I found when I need to retrieve those emails, they simply are not there. I was told to delete the email account from my iphone, then to add it back into phone. I have done this and things seem fine, then after a few days it no longer works. I have researched this topic and see that I am not the only one with this problem. From what I can find no one seems to have the answer. Please help?
Settings > Mail, Contacts, Calendars > Tap email account in question > nMail days to sync > extend the time
-
Exceptions at the time of downloading jars from server to client PC-Help !!
Always getting some exceptions in my log file at the time of downloading the jar files from server to my client PC. Actually our appln contains different functionalities and one of the functionality is this stanalone appln. When i click on some links into my appln request will go to the server and then download some jars into client PC. After that it works as a stanalone appln.
i am attaching my stack trace along with this query. Plse reply ----
2006-04-06 05:48:58 StandardWrapperValve[default]: Servlet.service() for servlet default threw exception
java.io.IOException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.flushBuffer(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:48:59 ErrorDispatcherValve[localhost]: Exception Processing ErrorPage[exceptionType=java.lang.Exception, location=/error]
java.lang.IllegalStateException
at org.apache.catalina.connector.ResponseFacade.reset(ResponseFacade.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:250)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:48:59 StandardWrapperValve[default]: Servlet.service() for servlet default threw exception
java.io.IOException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.flushBuffer(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:00 ErrorDispatcherValve[localhost]: Exception Processing ErrorPage[exceptionType=java.lang.Exception, location=/error]
java.lang.IllegalStateException
at org.apache.catalina.connector.ResponseFacade.reset(ResponseFacade.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:250)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:00 StandardWrapperValve[default]: Servlet.service() for servlet default threw exception
java.io.IOException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.flushBuffer(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:00 ErrorDispatcherValve[localhost]: Exception Processing ErrorPage[exceptionType=java.lang.Exception, location=/error]
java.lang.IllegalStateException
at org.apache.catalina.connector.ResponseFacade.reset(ResponseFacade.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:250)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:02 StandardWrapperValve[default]: Servlet.service() for servlet default threw exception
java.io.IOException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.flushBuffer(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:02 ErrorDispatcherValve[localhost]: Exception Processing ErrorPage[exceptionType=java.lang.Exception, location=/error]
java.lang.IllegalStateException
at org.apache.catalina.connector.ResponseFacade.reset(ResponseFacade.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:250)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:04 StandardWrapperValve[default]: Servlet.service() for servlet default threw exception
java.io.IOException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.flushBuffer(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java(Compiled Code))
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:04 ErrorDispatcherValve[localhost]: Exception Processing ErrorPage[exceptionType=java.lang.Exception, location=/error]
java.lang.IllegalStateException
at org.apache.catalina.connector.ResponseFacade.reset(ResponseFacade.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:250)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java(Compiled Code))
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java(Compiled Code))
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java(Compiled Code))
at java.lang.Thread.run(Thread.java:498)
2006-04-06 05:49:05 StandardWrapperValve[default]: Servlet.service() for servlet default threw exception
java.io.IOException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.flushBuffer(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.ResponseBase.write(ResponseBase.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.connector.http.HttpResponseStream.write(HttpResponseStream.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java(Compiled Code))
at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java(Compiled Code))
at org.apache.catalina.core.ApplicationFilterChain.doFilcross posting idiot well, im sorry for that..I posted it here now cause it concerns more bout servlet..
-
Help with Dump files from other server.
Hello!
I'm having a problem with reading Dump files. The issue is this:
I'm working with a great number of SQL Servers installed in a big number of virtual/physical servers. The problem is that I can't analyse (neither with WinDg or Visual Studio) the .mdmp files out of the server that is having the issue.
Is there anyway that I could read the SQL Server dump files out of the server (It doesn't matter if it is in my Computer or another server)? Because it always shows an error of compatability with sqlservr.exe
Also is there any other tool that could help me to read sql server dump files?
Thank you very much :)Hello,
I would suggest you raise a case with Microsoft for accurate analysis of the dump.I would strongly recommend it .If you still want to proceed use below link
http://blogs.msdn.com/b/psssql/archive/2012/03/15/intro-to-debugging-a-memory-dump.aspx
As a fact by applying latest service pack you have chance to subside these Dumps
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Emails to/from server always bounce to some domains
Sorry if I'm posting this in the wrong place. I've wasted 2 full days and sporadic time throughout the last 3 weeks on this.
I recently migrated a site from Server 2003 to a new Windows Server 2008 server. Ever since the move, my emails to and from my email address bounce from the server. I've spent 3 weeks with tech support on both ends getting nowhere.
Here's a rundown of the problem and what I've done about it:
Problem 1: Email from my domain (call it mydomain .tld) sent to the new server (call it serverdomain .tld) always bounces
Emails sent from mydomain .tld to serverdomain .tld get bounced back INSTANTLY with the error "550-The mail server could not deliver mail to "user@ serverdomain .tld". The account or domain may not exist, they may be blacklisted, or missing the proper
dns entries."
Problem 2: Email from serverdomain .tld sent to mydomain .tld always bounces
Emails sent from serverdomain .tld directly to mydomain .tld always bounce back after a 5-10 second delay with the error "550 Sender verify failed."
All emails were sent directly from server to server using webmail interfaces.
Possible problems/solutions I've explored:
Spam Filtering:
The new server's mail server (SmarterMail 2010) has spam filter bouncing disabled. No blacklists or greylists are defined.
The server hosting my email account is a shared hosted server, so I don't have access to its spam settings, but I have been assured by their technical support that the server's IP address is not blacklisted or blocked in any way.
Blacklist tests at MXToolBox.org all come up clean.
SPF Records:
I have defined an SPF (TXT) record for the domain "v=spf1 ip4:xxx.xxx.xxx.xxx -all", which points to the IP address of the mail server / web server. I do not have a type (SPF) record as Windows Server doesn't have an option for this type of record.
SPF test passes without errors at www . kitterman.com/spf/validate.html. Test email through spf-test@ openspf.net returns no errors.
Reverse Lookup:
I have a working reverse IP set up and is confirmed by checking it at ipadmin.junkemailfilter.com/rdns.php that points back to serverdomain .tld.
Testing through Telnet actually works:
I followed the steps at technet.microsoft.com/en-us/library/bb123686.aspx to log into the SMTP server on the new server's end and was able to successfully send an email manually to the new server, even using the same email address that keeps failing to send
directly to the server.
Some observations from the logs:
When sending email from mydomain .tld to serverdomain .tld, NO LOG ENTRIES are created at serverdomain .tld. This leads me to believe something is blocking it before it ever connects to the server.
When sending email from serverdomain .tld to mydomain .tld, the following log entries are created:
13:02:50 [60055] Delivery started for user@ serverdomain .tld at 1:02:50 PM
13:02:53 [60055] Skipping spam checks: No local recipients
13:02:56 [60055] Sending remote mail for user@ serverdomain .tld
13:02:56 [60055] Initiating connection to xxx.xxx.xxx.xxx
13:02:56 [60055] Connecting to xxx.xxx.xxx.xxx:25 (Id: 1)
13:02:56 [60055] Connection to xxx.xxx.xxx.xxx:25 from xxx.xxx.xxx.xxx:65260 succeeded (Id: 1)
13:02:56 [60055] RSP: 220-mydomain-host.tld ESMTP Exim 4.77 #2 Wed, 24 Oct 2012 13:02:58 -0700
13:02:56 [60055] RSP: 220-We do not authorize the use of this system to transport unsolicited,
13:02:56 [60055] RSP: 220 and/or bulk e-mail.
13:02:56 [60055] CMD: EHLO serverdomain .tld
13:02:56 [60055] RSP: 250-mydomain-host.tld Hello serverdomain .tld [xxx.xxx.xxx.xxx]
13:02:56 [60055] RSP: 250-SIZE 52428800
13:02:56 [60055] RSP: 250-AUTH PLAIN LOGIN
13:02:56 [60055] RSP: 250-STARTTLS
13:02:56 [60055] RSP: 250 HELP
13:02:56 [60055] CMD: MAIL FROM:<user@ serverdomain .tld> SIZE=951
13:02:56 [60055] RSP: 250 OK
13:02:56 [60055] CMD: RCPT TO:<user@ mydomain .tld>
13:02:57 [60055] RSP: 550-Verification failed for <user@ serverdomain .tld>
13:02:57 [60055] RSP: 550-The mail server could not deliver mail to user@ serverdomain .tld. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries.
13:02:57 [60055] RSP: 550 Sender verify failed
13:02:57 [60055] CMD: QUIT
13:02:57 [60055] RSP: 221 mydomain-host.tld closing connection
13:02:57 [60055] Bounce email written to 851023860056.eml
13:02:57 [60055] Delivery for user@ serverdomain .tld to user@ mydomain .tld has completed (Bounced)
13:02:59 [60056] Delivery started for at 1:02:59 PM
13:02:59 [60055] Delivery finished for user@ serverdomain .tld at 1:02:59 PM [id:851023860055]
13:03:02 [60056] Skipping spam checks: Internally Generated Message
13:03:05 [60056] Starting local delivery to user@ serverdomain .tld
13:03:05 [60056] Delivery for to user@ serverdomain .tld has completed (Delivered) Filter: None
13:03:05 [60056] End delivery to user@ serverdomain .tld
13:03:05 [60056] Delivery finished for at 1:03:05 PM [id:851023860056]
Configuration:
The new server uses Windows Server 2008 for DNS.
The mail server is also hosted at the same IP as the DNS server.
DNS Records for Serverdomain .tld:
[All xxx.xxx.xxx.xxx IP addresses point to the server's IP address]
Forward Lookup Zone: Serverdomain .tld
(same as parent folder) (SOA) 57, servername., hostmaster.
(same as parent folder) (NS) servername
(same as parent folder) (MX) [10] xxx.xxx.xxx.xxx
(same as parent folder) (TXT) v=spf1 ip4:xxx.xxx.xxx.xxx -all
* (A) xxx.xxx.xxx.xxx
mail (A) xxx.xxx.xxx.xxx
mail (MX) [10] xxx.xxx.xxx.xxx
mail (TXT) v=spf1 ip4:xxx.xxx.xxx.xxx -all
ns1 (A) xxx.xxx.xxx.xxx
ns2 (A) xxx.xxx.xxx.xxx
www (A) xxx.xxx.xxx.xxx
Reverse Lookup Zone: xxx.xxx.xxx.in-addr.arpa (syntax of IP is backwards, does not include last 3 digits)
(same as parent folder) (SOA) 10, servername., hostmaster.
(same as parent folder) (NS) servername
xxx.xxx.xxx.xxx (PTR) Serverdomain .tld
I'm totally at a loss. This is not just blocking email to/from me, but it has blocked email to at least one other domain name as well. I can get no useful help from tech support on either end.
(I had to put spaces in all links in this post because it wouldn't let me post links. Also, this forum crashes every single time I try to post in IE9, but works fine in FireFox. How ironic is that...)I can only help with Exchange, but generally speaking, that line;
13:02:57 [60055] RSP: 550-The mail server could not deliver mail to user@ serverdomain .tld. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries.
Mean the server checked the GAL (it's global adress book) and it refused it. It's usually a simple antispam and antirelay configuration. The strange thing is the log after, that the email is received...
That lead me to think the antispam software/hardware is badly configured, and for a reason X, it does not block the email from passing by it's filter. So yes, their answer is correct, but that mean all email is filtered in some way, so it's not
correct in some way too.
Does they configured your domain alias correctly and such basic information ? I have a big doubth at this point.
Run some wireshark to be sure the problem is not in your CIE, and after pass that to their IT's tech, if the email is sent correctly, and you receive a server answer back, then something in their config is not ok.
Don't forget that if the packet X is sent on your WAN to their datacenter, they are responsable for the correct receiving when it enter their datacenter.
(edited: A last point; don't forget they HAVE to run a antispam's box, as the MX is the same IP, so basicly the antispam box dispatch the email to the correct server (like check
https://www.barracudanetworks.com/ns/downloads/Setup_Guides/Barracuda_Email_Security_Service_SG_US.pdf) you will see what I mean, a list of domain and server)
MCP | MCTS 70-236: Exchange Server 2007, Configuring
Want to follow me ? | Blog:
http://www.jabea.net | http://blogs.technet.com/b/wikininjas/ -
Why doesn't using EAS to sync Drafts from server to client work anymore?
Hi All,
I understand that uploading an email into a Drafts folder is not possible and has never been possible using Exchange ActiveSync.
It has always been possible, however, to download emails from the Drafts folder and to sync the Drafts folder like any other folder. Recently, however, I have been having problems performing this sync. These problems are occuring on Office-365. Other users
are also experiencing the issue. There is a thread discussing this issue on that site at: http://community.office365.com/en-us/forums/158/p/176113/525322.aspx#525322
Unfortunately, there is still no resolution forthcoming from the Office-365 support team, so I thought it might help to cross-post the problem here.
In short, the problem that I am seeing is that the GetItemEstimate command receives a Status of 4 indicating an invalid sync key. This is even though the Sync Key is known the be valid. If that issue is ignored, and a Sync command is sent, then there is no
error, but the incorrect information is returned. The information that should be returned is the 'Adds' for the folder. Instead, an empty reply is received, indicating that there is nothing to sync.
Here are the details from the interaction:
=================
[EAS] Client Sends:
================
<Sync xmlns="AirSync:">
<Collections>
<Collection>
<SyncKey>0</SyncKey>
<CollectionId>4</CollectionId>
</Collection>
</Collections>
</Sync>
======================
[EAS] Received from Server
======================
<Sync>
<Collections>
<Collection>
<SyncKey>1335200247</SyncKey>
<CollectionId>4</CollectionId>
<Status>1</Status>
</Collection>
</Collections>
</Sync>
=================
[EAS] Client Sends:
=================
<GetItemEstimate xmlns="GetItemEstimate:">
<Collections>
<Collection>
<airsync:SyncKey>1335200247</airsync:SyncKey>
<CollectionId>4</CollectionId>
</Collection>
</Collections>
</GetItemEstimate>
======================
[EAS] Received from Server
======================
<GetItemEstimate>
<Response>
<Status>4</Status>
<Collection>
<CollectionId>4</CollectionId>
</Collection>
</Response>
</GetItemEstimate>
================
[EAS] Client Sends
================
<Sync xmlns="AirSync:">
<Collections>
<Collection>
<SyncKey>1335200247</SyncKey>
<CollectionId>4</CollectionId>
<DeletesAsMoves/>
<GetChanges/>
<WindowSize>64</WindowSize>
<Options>
<airsync:MIMESupport>2</airsync:MIMESupport>
</Options>
</Collection>
</Collections>
</Sync>
=====================================
This receives an empty reply indicating no changes
Here are the HTTP Headers:
=====================================
Headers: {
"Cache-Control" = private;
"Content-Encoding" = gzip;
"Content-Length" = 119;
"Content-Type" = "application/vnd.ms-sync.wbxml";
Date = "Fri, 19 Jul 2013 22:31:47 GMT";
"MS-Server-ActiveSync" = "15.0";
Server = "Microsoft-IIS/7.5";
"Set-Cookie" = "X-BackEndCookie=S-1-5-21-2447848828-1310731447-1641304557-13231500=u56Lnp2ejJqBz83MmsfNncnSzJnGztLLyMfP0p7Nxp3Szs/HycjPzJrIy5ybgZiQkJuXipKekYzRkJGSlpyNkIyQmYvRnJCSgcjQzsbQzc/OzN/Oz8XLzsXLyN+vsg==; expires=Fri,
19-Jul-2013 22:41:47 GMT; path=/Microsoft-Server-ActiveSync; secure; HttpOnly";
Vary = "Accept-Encoding";
"X-AspNet-Version" = "4.0.30319";
"X-BEServer" = BN1PR05MB121;
"X-CalculatedBETarget" = "bn1pr05mb121.namprd05.prod.outlook.com";
"X-DiagInfo" = BN1PR05MB121;
"X-FEServer" = BY2PR09CA003;
"X-Powered-By" = "ASP.NET";
"request-id" = "b78e1afc-74b4-4080-a8b2-c641f567d4f9";
Cookies: (
"<NSHTTPCookie version:0 name:\"X-BackEndCookie\" value:\"S-1-5-21-2447848828-1310731447-1641304557-13231500=u56Lnp2ejJqBz83MmsfNncnSzJnGztLLyMfP0p7Nxp3Szs/HycjPzJrIy5ybgZiQkJuXipKekYzRkJGSlpyNkIyQmYvRnJCSgcjQzsbQzc/OzN/Oz8XLzsXLyN+vsg==\"
expiresDate:2013-07-19 22:41:47 +0000 created:2013-07-19 22:31:47 +0000 (3.95966e+08) sessionOnly:FALSE domain:\"outlook.office365.com\" path:\"/Microsoft-Server-ActiveSync\" isSecure:TRUE>"
Thanks!
-RichHi Tom,
Thanks for following up on this and providing a definitive answer. It is much appreciated.
The decision they have made to block the Drafts folder syncing is mildly disappointing.
Unfortunately, the mechanism by which they are implementing this makes it a more serious issue.
Specifically, they should not be returning a Status of 4 in response to the GetItemEstimate for the Drafts folder. That Status of 4 effectively says, "Try Again". See section 2.2.3.162.6 of the MS-ASCMD document.
Instead, they should probably return a Status of 1 and an Estimate of 0. This would be the appropriate match with their empty collection in response to the Sync command.
Alternatively, they could return a Status of 2 indicating, "an incorrect folder was requested".
Or they could simply omit the folder from the FolderHierarchy response.
By returning a 4 and requesting that the client try again, they can cause the client to enter a continuous (and infinite) stream of GetItemEstimate requests. By following the documentation from 2.2.3.162.6, a client would get into this loop:
1) GetItemEstimate returns 'Invalid sync key'
2) FolderSync returns status OK
3) GetItemEstimate returns 'Invalid sync key'
4) FolderSync with syncKey 0 returns Status OK
5) goto 1
Thanks,
-Rich -
Help with email suppot on n96 needed please.
hi, im hoping some one can help me with my problem, i downloaded the email update for n96, it's the 1st time ive used it, (the one with the pink @ logo.) i go through the email setup and ad my main account with another one. it worked for a while until both accounts got an email from nokia mail saying that its not working and gave me a list of reason.
Dear Nokia Messaging customer,
Recently, our email service has been unable to connect to your email service provider, preventing email delivery to your phone.
This may occur due to one of the following reasons:
1. Through your service provider, you have changed the email password of your email address. If so, you must update your Nokia Messaging service account with your new password. Email messages will then be delivered to your phone.
2. The server for your email address is down. For more information, contact your service provider.
3. You might have inadvertently changed a setting in your Nokia Messaging service account. Log in to your Nokia Messaging account on the website http://netac2.vie.hosting.nokia.com/account to determine whether your information needs to be updated.
Sincerely,
The Nokia Messaging Team
now, i never changed any settings, or password information, and hotmail is saying theres is nothing wrong.
can some one please help me?!?! thank you.please try and help some 1! This is really bugging me.
Maybe you are looking for
-
[SOLVED] SLiM locked in Virtual Box
So I installed the newest iso, got things ok in terminal and installed SLiM, but I'm stuck at the SLiM login. Neither root nor user works. I've tried console as username to force xterm, but all I get is a black screen with an X for a mouse. tried exi
-
Finding threads that have new messages
Like a lot of people I post suggestions in reply to new topics. I don't want to subscribe to every thread that I take part in, that would be a lot of emails coming to me! But I do want to go to My Posts and quickly see what threads have new messages.
-
SharePoint subscribed calendar on iPhone?
We have a shared calendar on SharePoint that my team uses to track who is out of the office. The site is only accessible when connected to our network (or through VPN). I subscribe to the calendar in Outlook 2007. My question is: is it possible t
-
How to disable Undo closed tab notification
New version of firefox for android (33.0) has a new feature: it notifies you every time you close a tab and suggests to undo. This new feature quickly became as much annoying as it was frustrating previously to accidentally close a tab. So I was sear
-
Clarifications on BW on HANA objects
Team I need your help to get clarification on the below points. 1. HANA Optimized cubes/dso --> I know how to migrate bw cubes/dso into hana optimized objects. But i need clarification on the below point Suppose i have a cube in my bw system where i