Help with ESB - FTP Inbound Adaptor - using SFTP

I am a newbie to ESB. I need to get files from an SFTP server machine and route them to a local file.
I have created an ESB project in JDeveloper with an Inbound FTP adaptor, a router and an outbound file adaptor. I then registered it with the ESB server.
Following the instructions in the "Oracle Application Server Adaptor for Files/FTP" manual, I setup a connector factory with the (I think) necessary properties to connect to the SFTP server in the Oracle_Home\j2ee\home\application-deployments\default\FtpAdaptor\oc4j-ra.xml file. I also installed the cygwin/openssh according to the instructions though I am not sure I need it for gets.
Problem is that nothing is happening. It doesn't pull down any files from the SFTP server. I can connect using FileZilla (an interactive SFTP Client) to the SFTP server and see the directory where the files are and have setup the FTP Adaptor to poll that directory and filenames. In the ESB control I see no instances get created.
I don't know how to debug this. In the Enterprise Manager I can test the router and the file output services but I cannot find (and therefore cannot test) any service for the inbound FTP adaptor.
I would appreciate any help or insight anyone has! Thanks! Nick

Sorry for the double post. First time I tried it hung after I clicked on Post Message so I assumed it didn't actually post so I stopped and posted again.
Nick

Similar Messages

Help with apache ftp

Hi all
I am using the apache FTPClient to ftp files around. My problem is that I seem to be able to only send / retrieve 1 file before I need to reset the whole connection. I think that the answer may lie with this method
http://commons.apache.org/net/api/org/apache/commons/net/ftp/FTPClient.html#setRestartOffset(long)
... that's what I need, right? A restart offset, I think. How do I do it?
Does anyone have any experience with this package, or with programmatic FTP?

i figured this out.

Need help with tomcat 5.5 and using java classes

hey there,
i am trying to set up tomcat 5.5 on my computer at home and have sucessfully done so. i have been trying to use Java classes inside my JSP files however tomcat thows an internal servlet error as follows:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 144 in the jsp file: /order.jsp
Generated servlet error:
ProductList cannot be resolved to a type
An error occurred at line: 144 in the jsp file: /order.jsp
Generated servlet error:
ProductList cannot be resolved to a type
An error occurred at line: 144 in the jsp file: /order.jsp
Generated servlet error:
Product cannot be resolved to a type
i have the classes located as the setup tutorial recommends (root/WEB-INF/classes/) and still nothing works. i would appreciate any help anyone can give.
thanks,

Which tutorial are you following?
As of java1.4, all classes must be in packages for them to work in Tomcat. This means your beans and servlets too.
Put your beans in a package, and then recompile them, and put them in the right place.
eg
package com.mypackage
public class MyClass ...
once compiled would go into WEB-INF/classes/com/mypackage/MyClass.class
Are you using Product and ProductList classes in scriptlet code?
Have you imported them with a page directive
<%@ page import="com.mypackage.Product, com.mypackage.ProductList" %> ?

Need help with ESB (Please!)

Sorry bothering you, but I'm having a problem with the ESB console. Altough the process was deployed correctly I'm unable to see it in the console.
When the console window opens I got a lot of warnings like this:
Warning: Expected color but found 'selected'. Error in parsing value for property 'background'. Declaration dropped.
Source File: http://localhost/esb/picasso/styles/xtree.css
Line: 51
and this error:
Error: getLocalizedString is not defined
Source File: http://localhost/esb/esb/commands/template_constants.js
Line: 7
I can't see anything, but in JDeveloper I can see thre ESB Services tree, why ?
I'm unable to test the CustomerData tutorial. Other parts of SOA suite work fine.
Thanks in advance for your help.

Was the ESB console working before you deployed?
Is the error only for a particular process of all ESB process you have deployed?
Things to check is to see if those links work.
I have seen very starng things in the ESB console most of the time it comes down to the code you have written. Just double check that you have followed the instructions correctly.
cheers
James

Help with anonymus pl/sql layout using javascript

Hi people.
i want to display some records on a region (using apex 4.2) , this anonymous pl/sql script below shows 3 records from database, but the layout only shows me the first record with it's data, the others 2 records, only show me labels.
i have verified this same query creating a report and it shows the 3 records correctly.
i guess i am doing something wrong with this javascript routine or i am surely missing something,
in this link you can see the layout i am getting. (http://sdrv.ms/Xrv0J8).
the other little help i need is to display in one row for each record. actually i am getting one row for each label and one row for each data record. i have read and found is something about /div, but i don't no how to change it to get desired results, any suggestion is welcome.
thanks in advance for any help.
i am completely new in apex and java script, but i have several years experience in pl/sql.
The Script :
Begin
Declare
Cursor Deliv Is
Select item,
To_char (Delivery, 'month dd, yyyy hh24:mi:ss') Delivery,
Current_date
From pending_items;
Begin
For A In Deliv Loop
Begin
Sys.Htp.P ('<script type="text/javascript">');
Sys.Htp.P ('function cdtd() {');
Sys.Htp.P (' var xmas = new Date("' || a.delivery || '")');
Sys.Htp.P (' var now = new Date();');
Sys.Htp.P (' var timeDiff = xmas.getTime() - now.getTime();');
Sys.Htp.P (' if (timeDiff <= 0) {');
Sys.Htp.P (' clearTimeout(timer);');
-- Sys.Htp.P (' document.write("Some Text Here!");');
Sys.Htp.P (' // Run any code needed for countdown completion here');
Sys.Htp.P (' }');
Sys.Htp.P (' var seconds = Math.floor(timeDiff / 1000);');
Sys.Htp.P (' var minutes = Math.floor(seconds / 60);');
Sys.Htp.P (' var hours = Math.floor(minutes / 60);');
Sys.Htp.P (' var days = Math.floor(hours / 24);');
Sys.Htp.P (' hours %= 24;');
Sys.Htp.P (' minutes %= 60;');
Sys.Htp.P (' seconds %= 60;');
Sys.Htp.P (' document.getElementById("daysBox").innerHTML = days;');
Sys.Htp.P (' document.getElementById("hoursBox").innerHTML = hours;');
Sys.Htp.P (' document.getElementById("minsBox").innerHTML = minutes;');
Sys.Htp.P (' document.getElementById("secsBox").innerHTML = seconds;');
Sys.Htp.P (' var timer = setTimeout("cdtd()",1000);');
Sys.Htp.P ('}');
Sys.Htp.P ('</script>');
Sys.Htp.P ('Days ');
Sys.Htp.P ('<div id="daysBox"></div>');
Sys.Htp.P ('Hours');
Sys.Htp.P ('<div id="hoursBox"></div>');
Sys.Htp.P ('Minutes');
Sys.Htp.P ('<div id="minsBox"></div>');
Sys.Htp.P ('Seconds');
Sys.Htp.P ('<div id="secsBox"></div>');
Sys.Htp.P ('<script type="text/javascript">');
Sys.Htp.P ('cdtd();</script>');
End;
End Loop;
End;
End;

Let's focus on your delivery dates and javascript for now.
Why you would put your javascript in htp.p calls in a plsql region is quite beyond me. When you edit the page there is a javascript region where you can put global variables and functions, an excellent spot for this then, and a lot more maintainable than this.
Now it's also obvious that your query on pending items will return more than one record. So, using a report would serve you well in this case. However, using code like this:
document.getElementById("daysBox").innerHTML = days;
document.getElementById("hoursBox").innerHTML = hours;
document.getElementById("minsBox").innerHTML = minutes;
document.getElementById("secsBox").innerHTML = seconds;will not serve you. getElementById is meant to return one element uniquely identified by an ID. If you have a report with multiple rows, and elements on each row with the same ID, you are doing something wrong. You would need the delivery date per row, and I guess that you put out your code with htp.p because you do not know how to deal with that and passing it in to the javascript procedure.
But wouldn't it be more oppurtune for you to simply create a report with a source sql where you calculate each part of the date, and then refresh this region with a certain interval. If you'd refresh every 5 minutes, wouldn't that be more than fast enough to keep track of things? Don't forget, refreshing a region will execute the sql again.
It's not that you can't accomplish a multirecord report with a countdown per row, but are you comfortable enough with javascript and jquery to code and maintain that versus leveraging plsql and dynamic actions (there is even a dynamic action timer plugin provided by oracle)?

Help with supply and demand query using monthly buckets

I'm working on a query bound for Discoverer which pulls the aggregated supply and demand for an item and buckets it into months. So for any given item, I need to show the item, onhand, cost, aggregated supply (planned orders, requisitions, pos), and aggregated demand (planned order demand, jobs) - all bucketed by months.
The code below works okay to find all of the data for July, but I also need to show August and September. I'm thinking I could use a union but am reluctant because the query already runs kind of slow and I'm not sure if I'm on the right track.
Database Server
RDBMS : 10.2.0.3.0
Oracle Applications : 11.5.9
-Tracy
select
      item.inventory_item_id, item.organization_code, item.item, item.description
    , item.make_buy,item.planner_code
    , planned.compile_designator, planned.order_type_text, sum(planned.quantity_rate)planned_total
    , planned.mrp_sugg_due_month
    , sum(job.required_quantity-job.quantity_issued)job_open, job.required_month
    , onhand.total_qoh
    , purchase.item_revision prev, purchase.promised_month, purchase.ship_to_organization_id
    , sum((purchase.quantity-purchase.quantity_cancelled)-purchase.quantity_received)po_open
    , req.item_revision rrev, req.destination_organization_id, req.org_id, req.need_by_month
    , sum((req.quantity-req.quantity_cancelled)-req.quantity_delivered)req_open
    , cost.item_cost,cost.cost
from
--item--
(select mtl.inventory_item_id, mtl.segment1 item,mtl.description,decode(mtl.planning_make_buy_code,1,'Make',2,'Buy') make_buy
        ,mtl.organization_id, mtp.organization_code, mtl.planner_code
       ,to_char(add_months(sysdate,+1),'YYYY_MM')month1, to_char(add_months(sysdate,+2),'YYYY_MM')month2
       ,to_char(add_months(sysdate,+3),'YYYY_MM')month3
from    inv.mtl_system_items_b mtl, inv.mtl_parameters mtp
where    mtl.organization_id = mtp.organization_id
)item,
--planned orders - 3 months --
(select compile_designator,organization_id,inventory_item_id,order_type_text,nvl(quantity_rate,0)quantity_rate,new_due_date
       ,to_char(trunc(new_due_date,'MM'),'YYYY_MM')mrp_sugg_due_month
from   apps.mrp_orders_sc_v
where order_type_text in ('Planned order','Planned order demand')
and    to_char(trunc(new_due_date,'MM'),'YYYY_MM') <= to_char(add_months(:Month,+2),'YYYY_MM')
and    to_char(trunc(new_due_date,'MM'),'YYYY_MM') >= to_char(:Month,'YYYY_MM')
)planned,
--jobs - 3 months--
(select organization_id,wip_entity_name job, inventory_item_id,concatenated_segments,nvl(required_quantity,0)required_quantity
        ,nvl(quantity_issued,0)quantity_issued, date_required,to_char(trunc(date_required,'MM'),'YYYY_MM') required_month
        ,wip_entity_id,creation_date, wip_job_status
from    apps.wip_requirement_ops_inq_v
where   primary_item_id <>inventory_item_id
and     wip_job_status not in ('Closed','Cancelled','Complete')
and     to_char(trunc(date_required,'MM'),'YYYY_MM') <= to_char(add_months(:Month,+2),'YYYY_MM')
and     to_char(trunc(date_required,'MM'),'YYYY_MM') >= to_char(:Month,'YYYY_MM')
)job,
--qty onhand--
(select inventory_item_id,organization_id,sum(nvl(transaction_quantity,0))total_qoh
from     inv.mtl_onhand_quantities_detail
group by inventory_item_id, organization_id
)onhand,
-- po - 3 months--
(select pol.item_id, pol.item_revision, nvl(pll.quantity,0)quantity, nvl(pll.quantity_received,0)quantity_received
      , nvl(pll.quantity_rejected,0),nvl(pll.quantity_cancelled,0)quantity_cancelled,poh.segment1 po_num
       ,pll.promised_date, to_char(trunc(pll.promised_date,'MM'),'YYYY_MM')promised_month
       ,pll.shipment_num,pll.ship_to_organization_id
from   po.po_lines_all pol, po.po_headers_all poh, po.po_line_locations_all pll
where poh.po_header_id = pol.po_header_id
and    pol.po_header_id = pll.po_header_id
and    pol.po_line_id = pll.po_line_id
and    pol.cancel_flag != 'Y'
and    pol.item_id is not null
and    to_char(trunc(pll.promised_date,'MM'),'YYYY_MM')<= to_char(add_months(:Month,+2),'YYYY_MM')
and    to_char(trunc(pll.promised_date,'MM'),'YYYY_MM')>= to_char(:Month,'YYYY_MM')
)purchase,
--reqs - 3 months--
(select prh.segment1 req_number,nvl(prl.quantity,0)quantity,nvl(prl.quantity_delivered,0)quantity_delivered
       ,nvl(prl.quantity_cancelled,0)quantity_cancelled
       ,prl.destination_organization_id,prl.org_id,prl.item_id,prl.item_revision,prl.need_by_date
       ,to_char(trunc(prl.need_by_date,'MM'),'YYYY_MM')need_by_month
from   po.po_requisition_headers_all prh, po.po_requisition_lines_all prl
where prh.requisition_header_id = prl.requisition_header_id(+)
and    nvl(prl.cancel_flag,'N') !='Y'
and    prh.authorization_status != 'CANCELLED'
and    to_char(trunc(prl.need_by_date,'MM'),'YYYY_MM') <= to_char(add_months(:Month,+2),'YYYY_MM')
and    to_char(trunc(prl.need_by_date,'MM'),'YYYY_MM') >= to_char(:Month,'YYYY_MM')
)req,
--cost--
(select msib.inventory_item_id,msib.organization_id,cqm.material_cost,cic.item_cost
,(case when cqm.material_cost=0 then cic.item_cost else cqm.material_cost end) cost, cqm.cost_group_id
from inv.mtl_system_items_b msib
     ,(select cql.cost_group_id,cql.inventory_item_id,cql.organization_id,cql.layer_quantity,cql.material_cost,mp.organization_code
         from bom.cst_quantity_layers cql, inv.mtl_parameters mp
        where mp.default_cost_group_id = cql.cost_group_id) cqm
    ,bom.cst_item_costs cic
where msib.inventory_item_id = cqm.inventory_item_id(+)
and msib.organization_id = cqm.organization_id(+)
and msib.inventory_item_id = cic.inventory_item_id(+)
and msib.organization_id = cic.organization_id(+)
)cost
where item.inventory_item_id = job.inventory_item_id(+)
and   item.organization_id = job.organization_id(+)
and   item.month1 = job.required_month(+) -- 2009_07 --
and   item.inventory_item_id = onhand.inventory_item_id(+)
and   item.organization_id = onhand.organization_id(+)
and   item.inventory_item_id = purchase.item_id(+)
and   item.month1 = purchase.promised_month(+) -- 2009_07 --
and   item.inventory_item_id = req.item_id(+)
and   item.month1 = req.need_by_month(+) -- 2009_07 --
and   item.inventory_item_id = cost.inventory_item_id(+)
and   item.organization_id = cost.organization_id(+)
and   item.inventory_item_id = planned.inventory_item_id(+)
and   item.organization_id = planned.organization_id(+)
and   item.month1 = planned.mrp_sugg_due_month(+) -- 2009_07 --
and   item.make_buy = 'Buy'
and   item.item in ('161309040','744L755','150-GFM') --test items --
group by item.inventory_item_id,item.organization_code,item.item,item.description,item.make_buy,item.planner_code
      ,job.required_month ,onhand.total_qoh , purchase.item_revision, purchase.promised_month
        ,purchase.ship_to_organization_id ,cost.item_cost,cost.cost
       ,req.item_revision, req.destination_organization_id,req.org_id,req.need_by_month
       ,planned.compile_designator,planned.order_type_text,planned.mrp_sugg_due_month
order by item.organization_code,item.item

Hi,
Six things:
(1) Where are the one-to-many relationships between your tables? If a single row in mtl can match two (or more) rows in mrp, and can also match two (or more) rows in wip, then it looks like, when you join both of them them, you'll have a chasm trap, that is, you'll get all the matching rows from mrp paired with all matching rows from wip. Are you sure your existing query is producing the right results?
Are there one-to-many relationships with the other tables in your original query?
(2) Are your DATEs always at midnight? If not, avoid using BETWEEN and LAST_DAY for DATE comparisons: otherwise you'll miss everything between 00:00:01 and 23:59:59 on the last day.
That is, instead of
and     mrp.new_due_date(+) BETWEEN :Month AND LAST_DAY(ADD_MONTHS(:Month,2))ypou should say
and       mrp.new_due_date (+)     >= :Month
and       mrp.new_due_date (+)     < ADD_MONTHS (:Month, 3)(3) The basic way to pivot the months of mrp_due_date is:
SELECT    ...
,       NVL ( SUM ( CASE
                 WHEN mrp.new_due_date >= :month
                 AND   mrp.new_due_date < ADD_MONTHS (:month, 1)
                 THEN mrp.quantity_rate
                END
           , 0
           )          AS mrp_qty_0
,       NVL ( SUM ( CASE
                 WHEN mrp.new_due_date >= ADD_MONTHS (:month, 1)
                 AND   mrp.new_due_date < ADD_MONTHS (:month, 2)
                 THEN mrp.quantity_rate
                END
           , 0
           )          AS mrp_qty_1When you do this, do not GROUP BY TRUNC (mrp.new_due_date, 'MM').
The code above does two months: I'm sure you get the idea for how to do more.
To get dynamic column headings (such as Jun_2009 or "2009-06" instead of the generic mrp_qty_o) requires dynamic SQL. The best way to do dynamic SQL depends on the tool that is producing the query (e.g. SQL*Plus). What are you using? Are you willing to change, if it helps?
(4) Displaying separate columns from one row as a single column on multiple rows is called unpivoting. How badly do you want to do that? Your query would be simpler and faster if the output had only one row per group (rather than one row for mrp_qty and another row for wip_wty). That one row could have six columns (e.q. June_mrp, June_wip, July_mrp, July_wip, August_mrp and August_wip) instead of three. Depending on your front-end tool, you might even be able to wrap the single row of output so that it always appeared as two rows, each with three columns.
(5) Sorry I told you to do
and     mrp.order_type_text(+) in (...)I never use the + outer-join notation any more, so I forgot about the ORA-01719 error. There's no problem having an outer-join condition like that using ANSI notation. (One more reason to switch.)
(6) As you noticed, this site doesn't like to print the <> inequality operator, even inside tags.
Use the equivalent != operator instead, when posting on this site.

Any way to set "active mode" for FTP, or to use sFTP instead?

I have a web host that does not support passive FTP mode. I need to either set the mode to be "active mode", or I need to use secure FTP (sFTP). Is there any support for either of these within Muse?

Hi
By default , Adobe Muse FTP option uses " Passive Mode" , I am afraid its not possible to switch to "Active Mode" or to switch to Secure FTP. Alternatively, you may export the site locally using " Export as HTML " and then you may use third party FTP client to upload the site to your third party hosting using Active or Secure FTP.
Let me know if you have any further query.

Help with new computer for Photoshop Use ?

I am going to upgrade my laptop (prefer using laptop for various reasons) and I have the choice of two laptops. Yeah one is more expensive and is a gaming laptop but I just want to know which will work best with Photoshop CS6
The two laptops I have the choice of and I don't want any other suggestions please as I only have these to choose from are:
HP Envy DV7
(details here)
Samsun Series 7 Gamer
(details here)
The specs might not say but they both come with Win8 64 Bit
I know the Samsung is a high end gaming laptop but that dosent mean it will be great at photoshop and would the cheaper HP do photoshop just as well for less money ??
I would greatly appreciate any help and advice
thanks

Honestly, one cannot hope to advise you reasonably on how best to run an application as complex as Photoshop without your having stated any of your needs or goals. Pretty much any modern computer will be able to run Photoshop. But...
What kind of work products are you going to want to make with Photoshop?
Big images? Small images? Huge images?
Are you planning to do things that rely heavily on the GPU? 3D?
Are you going to work with an external monitor? Is color-management important to you?
CS6_User wrote:
would the cheaper HP do photoshop just as well
That's a kind of meaningless question.
It's akin to asking, "Would a Dodge take me to the store better than a Ford?"
If you're considering doing serious Photoshop work I'd suggest reconsidering a desktop system. Laptops are typically optimized for things other than what Photoshop needs.
-Noel

Help with Joining two SharePoint lists using LINQ

Hi Guys,
I have found many threads with this question. Although I had one doubt. I wanted to know that while performing a Join operation on two SharePoint Lists using LINQ does the column on which we are performing the join operation need to be a Lookup column?
I was initially using CAML but since my lists does not contain lookup columns I switched to LINQ but my doubt still remains.
I would really appreciate any help from you guys and also would appreciate if I could get some examples that I could refer to.
Thank you

Joins in LINQ to SharePoint 2010
How to: Query Using LINQ to SharePoint
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Help with status of inbound/outbound queues

Hello SDN XI experts!
I hope one of you can offer some assistance with an XI issue we have, as we currently have no XI resource on site and we're stuck in dire straits!
We have had some problems with our inbound and outbound queues in XI, and a search of the net and SDN hasn't helped yet. Basically, if I go in to transaction SMQ1 or SMQ2, I can see that there are files (or do you call them messages?) are building up in our queues with the status READY. To process these files through XI, I am going in to transaction SMQ1 and SMQ2 periodically, and activating the queue. This sets the status to RUNNING, and the files/messages are processed successfully.
What I'm after is how do I either:
a) set the queues so that they are always in status RUNNING;
b) schedule a job to activate the queues periodically; or
c) is there some other thing I am missing?
Sorry if this is a bit vague, but I have no experience of XI at all. If I haven't provided enough info, please ask some questions. Anything you can do to help would be great as I'm manually doing this ten times a day and it's getting tiresome!

Thanks for all your help guys, it's much appreciated as I have ZERO experience with XI...
I have uploaded a screenshot of SMQR to the web, apologies for the quality, but I only have MS Paint on this desktop:
http://img405.imageshack.us/img405/7202/smqrws8.jpg
Luckily, some files have started to queue up again, so I could take some more screen shots! Here is the view of SMQ2:
http://img166.imageshack.us/img166/7086/smq2mv6.jpg
And then when I double click a queue, you see this screen with the queue in the status READY:
http://img248.imageshack.us/img248/3935/smq22ed6.jpg
Until I go in to SMQ2, double click the queue, highlight it and press activate, the files/messages will just stay in XI. After I press the Activate button on the application toolbar in the third image, the files are processed successfully. i.e. If you go in to SXMB_MONI they have a little chequered flag next to them.
Thanks for all your time guys, points will be awarded if you can help me out!

PLEASE help with server-side form validation using PHP!!!

I feel like im going round and round in circles with this, after looking into all sorts of server-side advice i've come to the conclusion that i want to validate my form using server-side validation with PHP.
So my form has several drop down menu's and textareas (not all of them need validation). For the part of my form i would like to validate, all i want is the drop downs to have to be changed/selected. So just a simple message like "You must select an option" if customers haven't done so. For the textareas, they just need to be filled out, so a message like "Information required" to come up if customers haven't done so.
I believe i need to create a PHP page say for example 'error.php' place the validation code in there and set this part of the the form to -
<form name="product"form action="error.php" method="post" class="product_form">
BUT im getting really confused with creating the code for the error.php. Please please can anyone help me with this!!!???
Here are the drop down menu's i need validation on, error message being "You must select an option",
"figurine"
"engraving"
"font"
and here are the textareas that need validating, error message "Information required",
"test"
"Name"
"house"
"line_1"
"line_2"
"county"
"postcode"
"tel"
www.milesmemorials.com/product-GK1.html
I'd really appreciate any help!!!

Ness_quick wrote:
Great thats good enough for me. In that case, would you please be able to help me create the javascript for the above validation?? If you could just help me create it for this page i can amend it for all the other pages. I'd really really appreciate it!!!
Can you follow the below example?? Obviously AFTER validation has been successful you need to collect the information from the form and send it to the recipient email address...that's where you can use php. I'll check back tomorrow and see how you are doing.
<!DOCTYPE HTML>
<html><head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Form validation</title>

<script type="text/javascript">

</script>
</head>
<body>
<form name="product" form action="processForm.php" method="post" class="product_form" onsubmit="return RequiredFormFields()">
<p class="product_form_options">Choice of Figurine<br>
<select name="figurine" class="productButton" id="figurine" onChange="Recalculate()">
<option selected>-- Select figurine --</option>
<option value="7031">Tropical Green Granite with bronze sacred heart figurine as pictured(£7031)</option>
<option value="5216">Tropical Green Granite with bronze effect sacred heart figurine (£5216)</option>
<option value="5216">Tropical Green Granite with reconstituded figurine MF122(£5216)</option>
</select>
</p>
<p class="product_form_options">Engraved Lettering<br>
<select name="engraving" class="productButton" id="engraving" onChange="Recalculate()">
        <option selected>-- Select engraving --</option>
        <option value="2.30">Sandblast and enamel painted (£2.30/letter)</option>
        <option value="2.80">Sandblast and guilded (£2.80/letter)</option>
        <option value="2.20">Maintenance free (£2.20/letter)</option>
        <option value="3.73">Traditionally hand cut and enamel painted (£3.73/letter)</option>
        <option value="3.98">Traditionally hand cut and gilded (£3.98/letter)</option>
        <option value="4.34">Raised lead and enamel painted (£4.34/letter)</option>
        <option value="4.59">Raised lead and gilded (£4.59/letter)</option>
      </select>
</p>
<p class="product_form_options">Letter/Font Style<br>
      <select name="font" class="productButton" id="font" >
           <option selected>-- Select style --</option>
           <option value="Maintenance free">Maintenance free </option>
           <option value="White painted block">White painted block</option>
           <option value="White painted roman">White painted roman</option>
           <option value="White painted Script">White painted Script</option>
           <option value="White painted Celtic">White painted Celtic</option>
           <option value="White painted Nova">White painted Nova</option>
           <option value="Sliver painted block">Sliver painted block</option>
           <option value="Sliver painted roman">Sliver painted roman</option>
           <option value="Sliver painted Script">Sliver painted Script</option>
           <option value="Sliver painted Celtic">Sliver painted Celtic</option>
           <option value="Sliver painted Nova">Sliver painted Nova</option>
           <option value="Gold leaf painted block">Gold leaf painted block</option>
           <option value="Gold leaf painted roman">Gold leaf painted roman</option>
           <option value="Gold leaf painted Script">Gold leaf painted Script</option>
           <option value="Gold leaf painted Celtic">Gold leaf painted Celtic</option>
           <option value="Gold leaf painted Nova">Gold leaf painted Nova</option>
           <option value="Gold leaf painted Old English">Gold leaf painted Old English</option>
         </select>
         </p>
         <p>
<p>Name<br>
<input name="Name" type="text" id="Name" value="">
</p>
<p>House name or number:<br>
<input name="house" type="text" id="house" size="67">
</p>
<p>
<input name="submit" type="submit" class="place_order" id="submit" value="Place order">
</p>
</form>
</body>
</html>

PLEASE HELP with publishing video for youtube use while on trial!

I have the 30 day trial of adobe premiere pro and i just finished a project i have been working on for a long time of me singing with multiple videos playing at once. i would like to know how i can save the video to put onto my youtube page. i need to know as soon as possible! can anyone help me?

These videos show the use of the YouTube H.264 preset that shooternz mentioned, as well as other crucial aspects of exporting:
http://www.video2brain.com/en/videos-4001.htm
http://www.video2brain.com/en/videos-3781.htm

[solved] Need help with resolution on HDTV being used as a monitor

This is a separate but sorta related problem to my previous post: https://bbs.archlinux.org/viewtopic.php?id=101770
I have a Sanyo HDTV and I'm using it as my computer Monitor. The desktop now shows up on the screen, but the position of the desktop is wrong. (tool bars are off screen) and the windows are really big.
The TV manual gives these settings for hooking up a computer:
1360x768 16:9 refresh 60hz horizontal freq: 47.71 vertical freq: 60
Thats resolution is not showing up as an option in nvidia x server settings.
I tried using xrandr to set up the TV's resolution by adding a new mode
xrandr --newmode "1360x768_60.00" 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync
xrandr --addmode default 1360x768_60.00
xrandr --output default --mode 1360x768_60.00
xrandr: Configure crtc 0 failed
It didn't work so I tried following another tutorial online and added a modeline to my xorg.cong
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Apr 22 20:35:23 PDT 2010
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Sanyo"
ModelName "SANYO LCD"
HorizSync 15.0 - 46.0
VertRefresh 59.0 - 61.0
Option "DPMS"
Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807 -HSync +Vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9500 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1360x768_60.00"
EndSubSection
EndSection
That did not work either and now I'm a bit lost on what to do to get my desktop to show up properly on the screen.
In windows 7 I had to use some weird settings to get it to work:
resolution: 1790x1012
DPI: 125%
Should I try using those settings?
Any help will be greatly appreciated.
Last edited by Meskarune (2010-08-12 06:47:38)

I'm having the same exact problem with my HDTV
Running latest NVIDIA 256.44-2, it keeps defaulting to 1024x768. Sometimes my monitor will display 1260x768 but nvidia-settings still only shows 1024x768 as the highest resolution.
Did you end up using 1360x768_60 or 1360x768@60?
Can you post your xorg.conf?
And what is the command to get your output of:
1360x768_60.00 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync
Here is my xorg.conf in case it helps
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.44 ([email protected]) Thu Jul 29 01:52:36 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Disable "dri"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: builtin, VertRefresh source: builtin
Identifier "Monitor0"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
Option "DPMS"
# Modeline "1360x768_60"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7100 GS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
#Option "DynamicTwinView" "false"
#Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1366x768" "1360x768" "1260x768" "1024x768" "800x600"
EndSubSection
EndSection
Edit: I was able to get my resolution to 1280x768 using the xfree86 modeline generator http://xtiming.sourceforge.net/cgi-bin/xtiming.pl ( i put in 1360 but it defaults to 1280)
Last edited by ruhtranayr (2010-09-02 21:20:17)

Help with displaying errors in jsp using html:errors/

Here is my problem.
In my overridden ActionForm.validate() method, i am returning ActionErrors (as required). When there are input errors in my form submission, the control goes back to the JSP page i used to read user input (so far so good). The JSP page is rendered fine for taking input for the second time but no errors are displayed although i am using the tag <html:errors/>
I tried to find the org.apache.struts.action.ERROR in my request attributes and it is there with the size of 1 (because i am reporting one error, in my sample run). Any idea why <html:errors/> won't display the errors even though they are there??? Here is what i am doing in my ActionForm class:
public ActionErrors validate(ActionMapping mapping, HttpServletRequest request) {
ActionErrors errors = new ActionErrors();
if (this.email == null || this.email.length() < 1) {
errors.add("username", new ActionError
("error.username.required"));
return errors;
Any help is appreciated.

First of all, thanks for taking time to look at my message. Here is how my message-resources tag look like in struts-config.xml file:
<message-resources parameter="ApplicationResources"/>
The "ApplicationResources.properties" file exist in the WEB-INF folder of my application and following are the entries in that file that i think are relevant:
errors.header=<h3><font color="red">Validation Error</font></h3>You must correct the following error(s) before proceeding:<ul>
errors.footer=</ul><hr>
error.username.required=<li>Username is required</li>
Is there anything else needed to go into resource file? Or should i put my resource file somewhere else?

Help with recording guitar on GarageBand using M-Audio Firewire Solo

Hello everyone. I hope someone can help me. I recently bought a new mac mini and M-Audio Firewire Solo to record music. I'm new at recording so I have no idea what to do.
The problem is when I record playing the guitar, the sound is so low, I can barely hear the guitar playing when I play it back. I turned the gain to maximum level and I still can barely hear the guitar record. I know it's recording because I can hear the guitar when I play the record back, but the sound is way too low.
The weird thing is that the microphone works fine and when I record vocals, I can hear the playback fine.
Did I miss anything? Is there a good setting for recording guitars using M-Audio Firewire Solo? Is it because M-Audio Firewire Solo is not compatible with the latest Mac Mini system?
Please help! Thank you!

I connect the guitar to the guitar input that is in front of M-Audio firewire solo using this cable: http://www.livewire-usa.com/products/products.cfm?sBrand=adv . Then I turn gain up to the maximum level.
When I play the guitar, you know the bar that goes green on garageband (not sure what it's called)? Even if I strum really hard, the green never goes up past 1/4 of the bar. When I'm using the mic and speak a bit loudly, I can see that bar turning red. So it seems like it's not reading the input properly, but really I'm not sure, so hopefully you'll be able to help me
I'm actually using the mac mini's speaker to hear the sound, so I'm not sure if it's only coming from one speaker or not.
Sorry if I miss any important detail. I'm a newbie. And as always, I appreciate you taking the time to answer my questions!

Help with ESB - FTP Inbound Adaptor - using SFTP

Similar Messages

Maybe you are looking for